气相色谱-负离子化学电离质谱法分析深海鱼油 食品中的五种多溴联苯醚残留

建立了气相色谱-负离子化学电离质谱法(GC-NCI/MS)同时分析深海鱼油食品中5种多溴联苯醚残留的分析方法。深海鱼油食品用正己烷超声提取、中性与酸性硅胶色谱柱净化和正己烷洗脱后,以PCB103为内标物,采用GC-NCI/MS的选择离子监测方式(SIM)分析;同时探讨了5种多溴联苯醚的NCI/MS特征离子的断裂机理。当空白深海鱼油食品的加标浓度为20.0和100.0 μg/kg时,加标回收率为88.6%～111.3%,相对标准偏差为3.8%～13.5%,方法的检测限为0.77～1.34 μg/kg,线性范围为1.0～500.0 μg/kg,相关系数均大于0.9992。此方法已成功地应用于深海鱼油食品中5种痕量多溴联苯醚残留的同时分析。     

气相色谱-负离子化学源/质谱法(GC-NCI/MS)分析鱼类和贝类样品中多溴联苯醚和多溴联苯

将气相色谱-负离子化学源/质谱法(GC-NCI/MS)应用于分析鱼类和贝类样品中5种多溴联苯醚(PBDEs)和5种多溴联苯(PBBs)残留.鱼类和贝类样品以正己烷/丙酮(1∶1,V/V)作为提取剂,采用超声萃取法,提取液经酸性硅胶和中性硅胶层析柱净化和正己烷洗脱后,以PCB-103为内标物和GC-NCI-MS的选择离子...     

凝胶渗透色谱-分散固相萃取法同时测定鸡蛋中多溴联苯醚及其衍生物、四溴双酚A和六溴环十二烷

建立了一种同时检测鸡蛋中四溴双酚A(TBBP A)、六溴环十二烷(HBCD)和多溴联苯醚(PBDEs)及其衍生物羟基多溴联苯醚(OH-PBDEs)和甲氧基多溴联苯醚(MeO-PBDEs)的凝胶渗透色谱(GPC)-分散固相萃取(DSPE)-液相色谱-串联质谱(HPLC-MS/MS)和气相色谱-负化学源质谱(GC-NCI/MS)的检测方法。样品经正己烷、二氯甲烷(1∶1,V/V)加速溶剂萃取,凝胶渗透色谱净化后,经100 mg十八烷基键合硅胶(C18)分散固相萃取吸附剂去除杂质,液相色谱-串联质谱和气相色谱-负化学源质谱方法测定,外标法定量。在蛋白和蛋黄样品中添加1.0或5.0μg/kg的目标物,其回收率分别为64.5%~97.2%和65.6%~109.2%(除BDE-85为54.8%,OH-BDE-137为47.4%外),相对标准偏差小于20.2%,定量限为0.01~0.2μg/kg。     

固相萃取结合超高效液相色谱-串联质谱法及气相色谱-负化学源质谱法测定人血清中的四溴双酚A、六溴环十二烷和多溴联苯醚

建立了固相萃取同时提取、净化血清中四溴双酚A(TBBPA)、α, β, γ-六溴环十二烷(HBCD)和8种多溴联苯醚(PBDEs)同系物的样本前处理方法,并结合色谱-质谱分离分析技术检测人血清样本中该类化合物的含量。试样在加入各自的同位素内标物后以甲基叔丁基醚/正己烷(1:1, v/v)混合溶剂进行萃取,再经浓硫酸去除脂肪后,以LC-Si固相萃取柱分离HBCD/TBBPA和PBDEs。采用分步检测的方式,在50 mm长BEH C18反相色谱柱上以超高效液相色谱-串联质谱(UPLC-MS/MS)的多反应监测模式(MRM)检测HBCD和TBBPA,在15 m长的毛细管柱上以气相色谱-负化学源质谱(GC-NCI/MS)的选择离子监测模式(SIM)检测PBDEs。以胎牛血清为空白基质,当HBCD、TBBPA和BDE-209的加标水平为0.5 ng/g和5 ng/g、三溴至七溴联苯醚的加标水平为0.05 ng/g和0.5 ng/g时,它们的平均加标回收率为80.3%～108.8%,相对标准偏差为1.02%～11.42%(n=5);以信噪比(S/N)为3计算,方法的检出限(LOD)为1.81～42.16 pg/g。采用该方法对实际样品进行测定,结果表明,本方法快速、准确、灵敏度高,能够满足血清中HBCD、TBBPA和PBDEs残留的同时提取及测定的要求。     

气相色谱-负化学源质谱快速测定母乳中的多溴联苯醚

建立了母乳中8种多溴联苯醚(PBDEs：BDE28,BDE47,BDE99,BDE100,BDE153,BDE154,BDE183,BDE209)的气相色谱-负化学源质谱测定方法(GC-NCI/MS)。样品经索氏提取、酸化硅胶除脂、硅胶氧化铝色谱柱净化后,在7 m长的毛细管气相色谱柱上快速分离,NCI/MS以选择离子监测模式测定目标化合物。其中,三溴～七溴联苯醚采用内标法定量,十溴联苯醚(BDE209)采用同位素稀释法定量。8种PBDEs的检出限为1.74～6.35 pg/g(以脂肪计)。加标回收试验的回收率为61.5%～108%,相对标准偏差为2.06%～10.1%(n=6)。并采用母乳参考物质进一步证实了该方法的准确可靠。该方法提高了BDE209的分析灵敏度,而且分析成本相对较低,分析时间短,适于推广。     

超高效液相色谱-串联质谱法同时测定塑料玩具中四溴双酚A和六溴环十二烷

建立了超高效液相色谱-串联质谱法(UPLC-MS/MS)同时测定塑料玩具中四溴双酚A和六溴环十二烷含量的方法.样品经丙酮-正已烷超声提取,甲醇沉淀净化后,采用UPLC-MS/MS法,以多反应监测模式测定,外标法定量.目标物在2.0～100 μg/L范围内呈现良好的线性关系,相关系数大于0.9973,检出限为0.010～...     

凝胶渗透色谱结合气相色谱-负化学源质谱法分析鱼肉及鱼油中的多溴联苯醚和得克隆阻燃剂

建立了凝胶渗透色谱(GPC)结合气相色谱-负化学源质谱(GC-NCI/MS)检测鱼肉及鱼油中8种多溴联苯醚(PBDEs)同系物及2种得克隆阻燃剂(DP)的分析方法。试样中加入内标物BDE-77和13C12-BDE-209后进行索氏提取,提取液经自动GPC系统除脂,多层硅胶层析柱净化后,在15 m长的毛细管气相色谱柱上分离,NCI/MS以选择离子监测方式检测目标化合物。以鱼肉样品为基质,当PBDEs的加标水平为0.2 ng/g和2 ng/g、BDE-209和DP的加标水平相应提高10倍时,其平均加标回收率为71.1%～121.4%,相对标准偏差为2.96%～13.31%(n=5);以信噪比(S/N)为3计算方法的检出限(LOD)为2.2～39.8 ng/kg。用该方法检测市售鱼肉及鱼油样品,其中多溴联苯醚总含量为2.18～15.93 ng/g,以BDE-209、BDE-47为主,两种DP均未检出。该方法准确、灵敏度高,能够满足富含脂质的动物性样品中痕量DP和PBDEs残留的分析要求。     

凝胶渗透色谱结合气相色谱-负化学源质谱法分析鱼肉及鱼油中的多溴联苯醚和得克隆阻燃剂

建立了凝胶渗透色谱(GPC)结合气相色谱-负化学源质谱(GC-NCI/MS)检测鱼肉及鱼油中8种多溴联苯醚(PBDEs)同系物及2种得克隆阻燃剂(DP)的分析方法。试样中加入内标物BDE-77和13C12-BDE-209后进行索氏提取,提取液经自动GPC系统除脂,多层硅胶层析柱净化后,在15 m长的毛细管气相色谱柱上分离,NCI/MS以选择离子监测方式检测目标化合物。以鱼肉样品为基质,当PBDEs的加标水平为0.2 ng/g和2 ng/g、BDE-209和DP的加标水平相应提高10倍时,其平均加标回收率为71.1%～121.4%,相对标准偏差为2.96%～13.31%(n=5);以信噪比(S/N)为3计算方法的检出限(LOD)为2.2～39.8 ng/kg。用该方法检测市售鱼肉及鱼油样品,其中多溴联苯醚总含量为2.18～15.93 ng/g,以BDE-209、BDE-47为主,两种DP均未检出。该方法准确、灵敏度高,能够满足富含脂质的动物性样品中痕量DP和PBDEs残留的分析要求。     

气相色谱-质谱联用法测定塑料产品中的溴系阻燃剂

溴系阻燃剂是目前全世界范围内使用的主要阻燃剂,常用的有十溴联苯醚、四溴双酚A、四溴双酚A-双(2,3-二溴)丙醚、六溴环十二烷、三溴苯酚、十溴联苯乙烷等。溴系阻燃剂的分解温度大多在200~300℃左右,与各种高聚物的分解温度匹配,因此能在最佳时刻以气相及凝聚相同时起到阻燃作     

气相色谱-质谱法测定玩具中的4种阻燃剂

建立了玩具中三(2-氯乙基)磷酸酯、磷酸三邻甲苯酯、2,2′,4,4′,5-五溴联苯醚、2,2′,3,3′,4,4′,6,6′-八溴联苯醚等4种阻燃剂的气相色谱-质谱分析方法。玩具样品以V(正己烷):V(二氯甲烷)=1:1混合溶液为提取溶剂,超声提取30min,提取液以DB-5HT石英毛细管色谱柱(15m×0.25mm×0.10μm)分离后进行选择离子监测模式下的定性及定量分析。4种阻燃剂的定量限为0.1mg/kg,在低、中、高3个添加水平范围内,4种阻燃剂的平均回收率为93.5%～97.3%,相对标准偏差在2.4%～4.1%之间。     

Concurrent extraction,clean‐up,and analysis of polybrominated diphenyl ethers,hexabromocyclododecane isomers,and tetrabromobisphenol A in human milk and serum

A method has been developed and validated for the concurrent extraction, clean‐up, and analysis of polybrominated diphenyl ethers (PBDEs), α‐, β‐, and γ‐hexabromocyclododecane (HBCD), and tetrabromobisphenol A (TBBPA) in human milk and serum. Milk and serum samples were extracted using accelerated solvent extraction with acetone/hexane 1:1, v/v and liquid–liquid extraction with methyl‐tert‐butyl ether/hexane 1:1, v/v, respectively. The removal of co‐extracted biogenic materials was achieved by gel permeation chromatography followed by sulfuric acid treatment. The fractionation of the PBDEs and HBCD/TBBPA was performed using a Supelco LC‐Si SPE cartridge. The detection of the PBDEs was then performed by GC–MS and that of the HBCDs and the TBBPA was performed using UPLC–MS/MS. The pretreatment procedure was optimized, and the characteristic ions and fragmentation of the analytes were studied by MS or MS/MS. A recovery test was performed using a matrix spiking test at concentrations of 0.05–10 ng/g. The recoveries ranged from 78.6–108.8% with RSDs equal to or lower than 14.04%. The LODs were 1.8–60 pg/g. The usefulness of the developed method was tested by the analysis of real human samples, and several brominated flame retardants in different samples were detected and analyzed.     

A review of the analysis of novel brominated flame retardants

This review provides a summary of various analytical methodologies applied to the determination of “novel” brominated flame retardants (NBFRs) in various environmental compartments, as reported in peer reviewed literature, either in print or online, until the end of 2010. NBFRs are defined here as those brominated flame retardants (BFRs) which are either new to the market or newly/recently observed in the environment. The preparation and extraction of sediment, water, sewage sludge, soil, air and marine biota samples, the extract clean-up/fractionation and subsequent instrumental analysis of NBFRs are described and critically examined. Generally, while the instrumental analysis step mainly relies on mass-spectrometric detection specifically developed for NBFRs, and hyphenated to liquid or gas chromatography, preceding steps tend to replicate methodologies applied to the determination of traditional BFRs such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD). Shortcomings and gaps are discussed and recommendations for future development are given.     

Comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry for the identification of organobrominated compounds in bluefin tuna

This study evaluates comprehensive two-dimensional gas chromatography (GC×GC) coupled to time-of-flight mass spectrometry (GC×GC-ToF MS) for the simultaneous analysis of several classes of organobromines (OBs), including polybrominated diphenyl ethers (PBDEs), polybrominated biphenyls (PBBs), methoxylated PBDEs (MeO-PBDEs), several halogenated naturally produced compounds (HNPs) and eight novel brominated flame retardants (NBFRs), polybrominated hexahydroxanthene derivates (PBHDs), 2,4,6-tribromoanisole and a mixed halogenated compound (MHC-1), in bluefin tuna muscles. The proposed methodology maximised separation of both within and among OB families, and among these and other halogenated micropollutants detected in these samples and co-extracted matrix components. Special attention has been paid to solve co-elution problems observed during the analysis of OBs with one-dimensional GC-based techniques. Satisfactory separation among several relevant PBDEs and MeO-PBDEs has been obtained allowing their unambiguous determination in a single run. Additional studies were conducted to identify selected NBFRs and HNPs. 2,4-Dibromoanisole, a dibromophenol isomer and hexabromobenzene were identified in the investigated samples. Several new tri- and tetra-BHD derivates were also identified, indicating that these compounds could apparently exist as structured families in nature. In addition, a tetrabrominated diMeO-biphenyl and two tetrabrominated diMeO-BDEs were also tentatively identified.     

Multi-analyte method for the analysis of various organohalogen compounds in house dust

In the present study, a novel analytical approach for the simultaneous determination of 27 brominated flame retardants (BFRs), namely polybrominated diphenyl ethers (PBDEs), isomers of hexabromocyclododecane (HBCD), tetrabromobisphenol A (TBBPA) and several novel BFRs (NBFRs), together with 18 perfluoroalkyl substances (PFASs) in indoor dust was developed and validated. To achieve integrated isolation of analytes from the sample and their fractionation, a miniaturized method based on matrix solid phase dispersion (MSPD) was employed. Principally, after mixing the dust (<0.1 g) with the Florisil^®, the mixture was applied on the top of a sorbent (Florisil^®) placed in glass column and then analytes were eluted using solvents with different polarities. For the identification/quantification of target compounds largely differing in polarity, complementary techniques represented by gas and liquid chromatography coupled to tandem mass spectrometry (GC–MS/MS and LC–MS/MS) were used. The results of validation experiments, which were performed on the SRM 2585 material (for PBDEs, HBCDs and TBBPA), were in accordance with the certified/reference values. For other analytes (NBFRs and PFASs), the analysis of an artificially contaminated blank dust sample was realized. The method recoveries for all target compounds ranged from 81 to 122% with relative standard deviations lower than 21%. The quantification limits were in the range of 1–25 ng g⁻¹ for BFRs and 0.25–1 ng g⁻¹ for PFASs. Finally, 18 samples (6 households × 3 sampling sites) were analyzed. The high variability between concentrations of PFASs and BFRs in the dust samples from various households as well as collecting sites in a respective house was observed. The total amounts of PFASs and BFRs were in the range of 1.58–236 ng g⁻¹ (median 10.6 ng g⁻¹) and 39.2–2320 ng g⁻¹ (median 325 ng g⁻¹), respectively. It was clearly shown that dust from the indoor environment might be a significant source of human exposure to various organohalogen pollutants.     

Probing new approaches using atmospheric pressure photo ionization for the analysis of brominated flame retardants and their related degradation products by liquid chromatography-mass spectrometry

Atmospheric pressure photo ionisation has been evaluated for the analysis of brominated flame retardants and their related degradation products by LC-MS. Degradation mixtures obtained from the photochemical degradation of tetrabromobisphenol A and decabromodiphenylether were used as model systems for the assessment of the developed methodology. Negative ion mode gave best results for TBBPA and its degradation compounds. [M - H]- ions were formed without the need of using a doping agent. MS and MS/MS experiments allowed the structural identification of new TBBPA "polymeric" degradation compounds formed by attachment of TBBPA moieties and/or their respective cleavage products. In the case of polybromodiphenylethers, the positive mode provided M*+ ions and gave better results for congeners ranging from mono- to pentabromodiphenylethers whereas for higher bromination degrees, the negative ion mode (providing [M - Br + O]- ions) was best suited. Under both positive and negative ionisation modes, the use of toluene as doping agent gave better results. Liquid chromatography-mass spectrometry by means of atmospheric pressure photo-ionisation was applied to the analysis of aromatic brominated flame retardants and their degradation products. This methodology proved to be particularly useful, for the characterisation and structural identification of some compounds which are not amenable to GC-MS, especially in the case of apolar "polymeric" degradation products of tetrabromobisphenol A investigated in this work.     

New perspective on the determination of flame retardants in sewage sludge by using ultrahigh pressure liquid chromatography–tandem mass spectrometry with different ion sources

Analysis of 11 polybrominated diphenyl ethers (PBDEs), tetrabromobisphenol A bis 2,3-dibromopropylether (TBBPA-bis), tetrachlorobisphenol A (TCBPA), tetrabromobisphenol A (TBBPA) and hexabromocyclododecanes (HBCDs) was optimized by ultrahigh pressure liquid chromatography/tandem mass spectrometry (UPLC–MS/MS) operating in negative ion (NI) mode. Electrospray ionization (ESI), atmospheric pressure photoionization (APPI) and atmospheric pressure chemical ionization (APCI) sources were tested and for PBDEs APCI gave higher sensitivity than APPI while for TBBPA-bis APCI and APPI showed similar performance. ESI was the best option for TCBPA, TBBPA and HBCDs. Detection limits were between 20 and 59 fg for the compounds analyzed by ESI, 0.10 and 0.72 pg for PBDEs and 6 pg for TBBPA-bis. The matrix effect of sewage sludge extract was also tested showing negligible ion suppression for APCI and an increase of the background level of all investigated pollutants leading to a worsening of the limits of quantification by a factor between 1.2 and 3.3. The UPLC-APCI/MS/MS method for PBDEs, after pressurized liquid extraction (PLE), was validated by comparison with the concentration values from the NIST 1944 standard reference material. The advantages of the methods include low detection limits, PBDE congeners specificity using selected multiple reaction monitoring (MRM) transitions, and the absence of thermal degradation of higher PBDE congeners, especially BDE-209. The methods were applied for the determination of the above reported flame retardants in sewage sludge in order to get more information about the degradation on PBDEs (in particular BDE-209) during municipal wastewater treatments.     

Extraction of brominated flame retardants from polymeric waste material using different solvents and supercritical carbon dioxide

Different procedures were examined to extract pure and high concentrations of a series of brominated flame retardants from various polymer materials. These procedures include supercritical carbon dioxide (sc-CO₂), modified sc-CO₂, solvent and soxhlet extraction. Extraction with sc-CO₂ gave low extraction efficiencies (between 6 and 20%) probably due to the low pressure of sc-CO₂ used. The use of toluene, acetonitrile and THF as modifier in sc-CO₂ raised the extraction efficiencies for many flame retardants. High extraction efficiencies were achieved for tetrabromobisphenol A (TBBPA), TBBPA-bis-(2,3-dibromopropylether) (TBBPA-dbp), TBBPA-carbonatoligomer (TBBPA-co) and decabromodiphenylether (DECA) (between 93 and 100%) by using 1-propanol as solvent during soxhlet extraction. Toluene instead of 1-propanol was used where insufficient extraction of the flame retardant occurred. The materials (before and after extraction) were analysed with energy dispersive X-ray fluorescence analysis (EDXRF), high performance liquid chromatography with ultraviolet detection (HPLC/UV), gas chromatography/mass spectrometry (GC/MS) and infrared spectroscopy (IR) techniques. The properties of the extracted flame retardants such as TBBPA, TBBPA-dbp and 1,2-bis(tribromophenoxy)-ethane (TBPE) are in good agreement with those of standard reference materials.     

Versatile and fast gas chromatographic determination of frequently used brominated flame retardants in styrenic polymers

Two versatile and fast methods to identify and quantify brominated flame retardants (BrFRs) in styrenic polymers were developed. Gas chromatography/mass spectrometry (GC/MS) as well as gas chromatography with electron-capture detection (GC/ECD), both following ultrasonic-supported dissolution and precipitation (USDP), were applied. The substance range includes poly-brominated biphenyls (PBBs) and diphenyl ethers (PBDEs), as well as other commonly used flame retardants (FRs), including two phosphate-based flame retardants. The methods were verified using congener standards and flame-retardant polymer samples. Good recoveries were found. Overall run time for the analysis, including sample preparation, is less than 60min.