L-丝氨酸/壳聚糖/石墨烯/纳米金修饰电极的制备及应用

将L-丝氨酸(L-Serine)电聚合到裸金电极表面,再将壳聚糖(CS)、纳米金(Nano-Au)、石墨烯(GO)混合液滴涂在L-丝氨酸修饰的金电极上,制成L-Serine/GO/Nano-Au/CS/Au/CME电化学传感器.考察了胞嘧啶在该传感器上的电化学行为,优化了实验条件.结果表明,该传感器对胞嘧啶有良好的选择性和灵敏度,胞嘧啶的浓度在1.0×10~(-7)~1.0×10~(-3)mol/L范围内与峰电流的减小量呈现良好的线性关系,检出限为3.2×10~(-8)mol/L(S/N=3).将该传感器应用于实际样品中测定胞嘧啶,结果令人满意.     

新型抗癌药物长春地辛的电化学研究

以纳米金(AuNPs)/聚乙烯吡咯烷酮(PVP)为修饰剂,制备了一种新型修饰电极AuNPs/PVP/Au/CME,运用循环伏安法,详细探究了长春地辛(Vindesine,VDS)的电化学行为,研究了最佳测定条件。结果表明,修饰电极在pH=7.19的Na_2B_4O_7-KH_2PO_4底液中进行循环伏安扫描时,在0.39V处产生一个灵敏的还原峰P_1和一个不太灵敏的氧化峰P_2。用差分脉冲伏安法研究了修饰电极对VDS的电化学响应,结果表明响应电流与VDS浓度在1.0×10~(-8)~1.0×10~(-4) mol/L范围内呈良好的线性关系,相关系数R~2=0.9972,检出限为3.2×10~(-9) mol/L。AuNPs/PVP/Au/CME修饰电极对长春地辛的电化学检测具有高的灵敏度和好的选择性。     

纳米金/石墨烯复合膜修饰电极检测异烟肼

先采用滴涂法制备了石墨烯修饰电极(GR/GCE),然后采用电化学方法将纳米金沉积于石墨烯表面制备了纳米金/石墨烯复合材料修饰电极(Au NPs/GR/GCE)。研究了异烟肼(isoniazid,INZ)在该Au NPs/GR/GCE上的电化学行为。结果表明,异烟肼在该修饰电极上有良好的电化学响应。在优化条件下,线性扫描伏安法测定异烟肼的线性范围为1.0×10-7~1.0×10-4mol/L,检出限为5.0×10-8mol/L(S/N=3)。用该法测定了异烟肼注射液中异烟肼的含量,结果令人满意。     

纳米金/石墨烯复合膜修饰电极检测异烟肼EI北大核心CSCD

先采用滴涂法制备了石墨烯修饰电极(GR/GCE),然后采用电化学方法将纳米金沉积于石墨烯表面制备了纳米金/石墨烯复合材料修饰电极(Au NPs/GR/GCE)。研究了异烟肼(isoniazid,INZ)在该Au NPs/GR/GCE上的电化学行为。结果表明,异烟肼在该修饰电极上有良好的电化学响应。在优化条件下,线性扫描伏安法测定异烟肼的线性范围为1.0×10-7~1.0×10-4mol/L,检出限为5.0×10-8mol/L(S/N=3)。用该法测定了异烟肼注射液中异烟肼的含量,结果令人满意。     

纳米金/三聚氰胺修饰电极检测亚硝酸盐

采用电聚合方法制备三聚氰胺(MA)膜修饰玻碳电极(GCE),然后采用原位恒电位沉积法制备金纳米颗粒(Au),并将其修饰于膜电极表面,制得纳米金/三聚氰胺修饰玻碳电极(Au/MA/GCE)。用扫描电子显微镜(SEM)对修饰电极进行表面形貌和元素成分分析。用循环伏安法研究亚硝酸根(NO2-)在该修饰电极上的电化学行为发现,NO2-在0.85 V出现一灵敏的氧化峰。在优化的实验条件下,NO2-在1.0×10-5～1.0×10-3mol/L浓度范围内与其氧化峰电流成线性关系,检测下限为8.9×10-7mol/L。将修饰电极用于实际样品中NO2-的检测,效果良好。     

去肾上腺素在L-半胱氨酸修饰金电极上的电化学行为及其分析研究

应用循环伏安法(CV)和方波伏安法(SWV)研究了去甲肾上腺素(NE)在L-半胱氨酸自组装膜修饰金电极(L-Cys/Au)上的电化学行为。结果表明:在pH7.0的磷酸盐缓冲溶液中,L-Cys/Au对去甲肾上腺素具有明显的电催化作用。由方波伏安法测定的氧化峰电流在NE浓度1.0×10-6~4.0×10-5mol/L和6.0×10-5~4.0×10-4mol/L范围内分段呈线性关系,相关系数分别为0.9941和0.9962,检出限为5.0×10-7mol/L。已用于分析针剂样品。     

电沉积普鲁士蓝/壳聚糖修饰金电极的电化学研究

应用控制电位电解法在金电极上进行了普鲁士蓝(PB)/壳聚糖(CS)修饰膜的电沉积。在pH2、溶液组成为2.5 mmol/L FeCl3 2.5 mmol/L K3[Fe(CN)6] 0.01%CS 0.01 mol/L HCl和0.1 mol/L KCl的溶液中,于0.4 V(vs.SCE)电沉积300 s,获得性能理想的沉积膜。对修饰膜进行了红外和显微表征,结果表明,PB和CS同时沉积在电极上,且膜结构较纯PB沉积膜粗糙,修饰量大,具有更强的空间结构性。研究了PB/CS/金修饰电极(PB/CS/Au/CME)的电化学行为,该电极在中性(pH7.0~8.0)条件下性能比纯PB修饰膜更稳定,具有良好的电化学活性和对H2O2的电催化性能。氧化峰电流与H2O2浓度在1×10-6~5×10-3mol/L范围内呈良好线性关系,为研制基于酶催化反应的电化学生物传感器奠定了良好基础。     

基于L-半胱氨酸/CdTe量子点修饰电极的电化学传感器的制备及其对Pb~(2+)的检测

成功制备了由L-半胱氨酸和CdTe量子点作为修饰材料的电化学传感器并用于水体中Pb~(2+)的检测。巯基丙酸修饰的CdTe量子点通过水相合成,表面含有大量羧基,与L-半胱氨酸表面的氨基形成酰胺键,修饰于金电极表面。通过荧光分光光度计、透射电子显微镜、红外光谱、X射线衍射对L-Cys/CdTe QDs复合材料进行表征。采用循环伏安法(CV)研究了L-Cys/CdTe QDs修饰成分在金电极上的电化学性能及CdTe量子点的最佳自组装时间。采用差分脉冲溶出伏安法(DPSV)研究了铅离子在修饰电极上的电化学行为。在优化实验条件下,Pb~(2+)浓度在1.0×10~(-6)~1.0×10~(-2) mol/L范围内与其峰电流呈良好的线性关系,相关系数(r2)为0.993 8,检出限(3σ,n=5)为4.0×10~(-7) mol/L。该传感器具有良好的重现性和稳定性,有望用于实际水样中铅离子的检测。     

氧化石墨烯/三角形金纳米片/Nafion复合膜修饰电极对L-色氨酸的灵敏检测

采用晶种生长法制备了形状均一、导电性良好的三角形金纳米片(Au TNPs),并以氧化石墨烯(GO)为载体,聚阴离子Nafion为保护剂,将其修饰在玻碳电极(GCE)表面,制得氧化石墨烯/三角形金纳米片/Nafion复合膜修饰电极(GO/Au TNPs/Nafion/GCE).利用扫描电子显微镜和原子力显微镜对纳米复合材料的形貌进行表征,采用循环伏安法(CV)和示差脉冲伏安法(DPV)探讨了L-色氨酸(L-Trp)在不同修饰电极上的电化学行为.结果表明,GO/Au TNPs/Nafion/GCE对L-Trp表现出良好的电催化氧化特性.在0.10 mol/L的PBS缓冲溶液(p H=3.5)中,该修饰电极的响应峰电流与L-Trp的浓度存在良好的线性关系,线性范围为4.000×10~(-8)~6.000×10~(-5)mol/L,检出限为1.000×10~(-8)mol/L(S/N=3).该电极具有良好的重现性、稳定性和抗干扰能力.将该电极用于猪血清样品中L-Trp的测定,回收率为93.1%~105.9%,说明该电极在健康养殖生化检测领域有潜在的应用价值.     

介孔炭/纳米金修饰玻碳电极的制备及其应用研究

制备了介孔炭/纳米金修饰玻碳电极,并对对苯二酚(HQ)在该修饰电极上的电化学行为进行了研究。与HQ在纯介孔炭材料修饰玻碳电极上的电化学响应相比,HQ在该修饰电极上的氧化峰和还原峰电流均大大增加,表明纳米金与介孔炭复合后对HQ具有良好的催化作用。HQ在该修饰电极上经过富集后,峰电流明显增大。采用循环伏安法对HQ电化学行为进行研究,结果表明,HQ在3.0×10-8~1.0×10-6mol/L和1.0×10-6~1.0×10-4mol/L浓度范围内与峰电流呈良好的线性关系,据此建立了检测HQ的电化学分析方法。该方法的相对标准偏差为0.69%,检出限(S/N=3)为1.0×10-8mol/L,具有较高的稳定性和灵敏度。     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.