Hollow Metal–Organic-Framework-Mediated In Situ Architecture of Copper Dendrites for Enhanced CO2 Electroreduction

Electrocatalytic reduction of CO₂ to a single product at high current densities and efficiencies remains a challenge. However, the conventional electrode preparation methods, such as drop-casting, usually suffer from low intrinsic activity. Herein, we report a synthesis strategy for preparing heterogeneous electrocatalyst composed of 3D hierarchical Cu dendrites that derived from an in situ electrosynthesized hollow copper metal–organic framework (MOF), for which the preparation of the Cu-MOF film took only 5 min. The synthesis strategy preferentially exposes active sites, which favor's the reduction of CO₂ to formate. The current density could be as high as 102.1 mA cm⁻² with a selectivity of 98.2 % in ionic-liquid-based electrolyte and a commonly used H-type cell.     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.     

Sodalite‐type Cu‐based Three‐dimensional Metal–Organic Framework for Efficient Oxygen Reduction Reaction

Inspired by copper‐based oxygen reduction biocatalysts, we have studied the electrocatalytic behavior of a Cu‐based MOF (Cu‐BTT) for oxygen reduction reaction (ORR) in alkaline medium. This catalyst reduces the oxygen at the onset (E_onset) and half‐wave potential (E^1/2) of 0. 940 V and 0.778 V, respectively. The high halfway potential supports the good activity of Cu‐BTT MOF. The high ORR catalytic activity can be interpreted by the presence of nitrogen‐rich ligand (tetrazole) and the generation of nascent copper(I) during the reaction. In addition to the excellent activity, Cu‐BTT MOF showed exceptional stability too, which was confirmed through chronoamperometry study, where current was unchanged up to 12 h. Further, the 4‐electrons transfer of ORR kinetics was confirmed by hydrodynamic voltammetry. The oxygen active center namely copper(I) generation during ORR has been understood by the reduction peak in cyclic voltammetry as well in the XPS analysis.     

Electrocatalysis of N2 to NH3 by HKUST‐1 with High NH3 Yield

Electrolytic ammonia synthesis from nitrogen at ambient conditions is appearing as a promising alternative to the Haber‐Bosch process which is consuming high energy and emitting CO₂. Here, a typical MOF material, HKUST‐1 (Cu?BTC, BTC=benzene‐1,3,5‐tricarboxylate), was selected as an electrocatalyst for the reaction of converting N₂ to NH₃ under ambient conditions. At ?0.75 V vs. reversible hydrogen electrode, it achieves excellent catalytic performance in the electrochemical synthesis of ammonia with high NH₃ yield (46.63 μg h^?1 mg^?1 _cat. or 4.66 μg h^?1 cm^?2) and good Faraday efficiency (2.45%). It is indicated that the good performance of the HKUST‐1 catalyst may originate from the formation of Cu(I). In addition, the catalyst also has good selectivity for N₂ to NH₃.     

Water‐stable Adenine‐based MOFs with Polar Pores for Selective CO2 Capture

Here, we report two novel water‐stable amine‐functionalized MOFs, namely IISERP‐MOF26 ([NH₂(CH₃)₂][Cu₂O(Ad)(BDC)]?(H₂O)₂(DMA), 1 ) and IISERP‐MOF27 ([NH₂(CH₃)₂]_1/2[Zn₄O(Ad)₃(BDC)₂]?(H₂O)₂(DMF)_1/2, 2 ), which show selective CO₂ capture capabilities. They are made by combining inexpensive and readily available terephthalic acid and N‐rich adenine with Cu and Zn, respectively. They possess 1D channels decorated by the free amine group from the adenine and the polarizing oxygen atoms from the terephthalate units. Even more, there are dimethyl ammonium (DMA⁺) cations in the pore rendering an electrostatic environment within the channels. The activated Cu‐ and Zn‐MOFs physisorb about 2.7 and 2.2 mmol g^?1 of CO₂, respectively, with high CO₂/N₂ and moderate CO₂/CH₄ selectivity. The calculated heat of adsorption (HOA=21–23 kJ mol^?1) for the CO₂ in both MOFs suggest optimal physical interactions which corroborate well with their facile on‐off cycling of CO₂. Notably, both MOFs retain their crystallinity and porosity even after soaking in water for 24 hours as well as upon exposure to steam over 24 hours. The exceptional thermal and chemical stability, favorable CO₂ uptakes and selectivity and low HOA make these MOFs promising sorbents for selective CO₂ capture applications. However, the MOF′s low heat of adsorption despite having a highly CO₂‐loving groups lined walls is quite intriguing.     

Enhanced CO2 Adsorption Affinity in a NbO‐type MOF Constructed from a Low‐Cost Diisophthalate Ligand with a Piperazine‐Ring Bridge

A metal–organic framework (NPC‐6) with an NbO topology based on a piperazine ring‐bridged diisophthalate ligand was synthesized and characterized. The incorporated piperazine group leads to an enhanced adsorption affinity for CO₂ in NPC‐6, in which the CO₂ uptake is 4.83 mmol g^?1 at 293 K and 1 bar, ranking among the top values of CO₂ uptake on MOF materials. At 0.15 bar and 293 K, the NPC‐6 adsorbs 1.07 mmol g^?1 of CO₂, which is about 55.1 % higher than that of the analogue MOF NOTT‐101 under the same conditions. The enhanced CO₂ uptake combined with comparable uptakes for CH₄ and N₂ leads to much higher selectivities for CO₂/CH₄ and CO₂/N₂ gas mixtures on NPC‐6 than on NOTT‐101. Furthermore, an N‐alkylation is used in the synthesis of the PDIA ligand, leading to a much lower cost compared with that in the synthesis of ligands in the NOTT series, as the former does not require a palladium‐based catalyst and borate esters. Thus, we conclude that NPC‐6 is a promising candidate for CO₂ capture applications.     

Studies on Photocatalytic CO2 Reduction over NH2‐Uio‐66(Zr) and Its Derivatives: Towards a Better Understanding of Photocatalysis on Metal–Organic Frameworks

Metal–organic framework (MOF) NH₂‐Uio‐66(Zr) exhibits photocatalytic activity for CO₂ reduction in the presence of triethanolamine as sacrificial agent under visible‐light irradiation. Photoinduced electron transfer from the excited 2‐aminoterephthalate (ATA) to Zr oxo clusters in NH₂‐Uio‐66(Zr) was for the first time revealed by photoluminescence studies. Generation of Zr^III and its involvement in photocatalytic CO₂ reduction was confirmed by ESR analysis. Moreover, NH₂‐Uio‐66(Zr) with mixed ATA and 2,5‐diaminoterephthalate (DTA) ligands was prepared and shown to exhibit higher performance for photocatalytic CO₂ reduction due to its enhanced light adsorption and increased adsorption of CO₂. This study provides a better understanding of photocatalytic CO₂ reduction over MOF‐based photocatalysts and also demonstrates the great potential of using MOFs as highly stable, molecularly tunable, and recyclable photocatalysts in CO₂ reduction.     

Isolated Square‐Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Photocatalytic reduction of CO₂ to value‐added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to maximumly expose the active sites is the key to activate CO₂ molecules and determine the reaction selectivity. Herein, we synthesize a well‐defined copper‐based boron imidazolate cage (BIF‐29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO₂. Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady‐state and time‐resolved fluorescence spectra show these Cu sites promote the separation of electron–hole pairs and electron transfer. As a result, the cage achieves solar‐driven reduction of CO₂ to CO with an evolution rate of 3334 μmol g^?1 h^?1 and a high selectivity of 82.6 %.     

The Role of Multiwall Carbon Nanotubes in Cu‐BTC Metal‐Organic Frameworks for CO2 Adsorption

The discovery of natural gas fields with a high content of CO₂ in world gas reservoirs poses new challenges for CO₂ capture. This work investigates the use of the metal‐organic framework (MOF) Cu‐BTC and hybrid MWCNTs@Cu‐BTC for CO₂ adsorption. Cu‐BTC and hybrid MWCNTs@Cu‐BTC were synthesized by the solvothermal method. The results of imaging of intact MOF pores in Cu‐BTC and hybrid MWCNTs@Cu‐BTC nanocrystals by high‐resolution transmission electron microscopy (HRTEM) under liquid nitrogen conditions are presented. Physical characterizations of the solid adsorbents were made by using a selection of different techniques, including field‐emission scanning electron microscopy (FESEM), X‐ray powder diffraction (XRD), Fourier transform infrared (FT‐IR) spectroscopy, thermogravimetric analysis (TGA), Brunauer–Emmet–Teller (BET) surface area, and CO₂ adsorption and physisorption measurements. HRTEM and FESEM confirmed that Cu‐BTC has an octahedral shape and that the surface morphology of Cu‐BTC changes by the intercalation of MWCTNs. The results show that the modified Cu‐BTC improved the CO₂ adsorption compared to pure Cu‐BTC. The increase in the CO₂ uptake capabilities of hybrid MWCNTs@Cu‐BTC was ascribed to the intercalation of MWCNTs with Cu‐BTC crystals. The CO₂ sorption capacities of Cu‐BTC and hybrid MWCNTs@Cu‐BTC were found to increase from 1.91701 to 3.25642 mmol/g at ambient conditions.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Metal–Organic Framework‐Derived Carbon Nanorods Encapsulating Bismuth Oxides for Rapid and Selective CO2 Electroreduction to Formate

Carbon dioxide (CO₂) conversion is promising in alleviating the excessive CO₂ level and simultaneously producing valuables. This work reports the preparation of carbon nanorods encapsulated bismuth oxides for the efficient CO₂ electroconversion toward formate production. This resultant catalyst exhibits a small onset potential of ?0.28 V vs. RHE and partial current density of over 200 mA cm^?2 with a stable and high Faradaic efficiency of 93 % for formate generation in a flow cell configuration. Electrochemical results demonstrate the synergistic effect in the Bi₂O₃@C promotes the rapid and selective CO₂ reduction in which the Bi₂O₃ is beneficial for improving the reaction kinetics and formate selectivity, while the carbon matrix would be helpful for enhancing the activity and current density of formate production. This work provides effective bismuth‐based MOF derivatives for efficient formate production and offers insights in promoting practical CO₂ conversion technology.     

Catholyte‐Free Electrocatalytic CO2 Reduction to Formate

Electrochemical reduction of carbon dioxide (CO₂) into value‐added chemicals is a promising strategy to reduce CO₂ emission and mitigate climate change. One of the most serious problems in electrocatalytic CO₂ reduction (CO₂R) is the low solubility of CO₂ in an aqueous electrolyte, which significantly limits the cathodic reaction rate. This paper proposes a facile method of catholyte‐free electrocatalytic CO₂ reduction to avoid the solubility limitation using commercial tin nanoparticles as a cathode catalyst. Interestingly, as the reaction temperature rises from 303 K to 363 K, the partial current density (PCD) of formate improves more than two times with 52.9 mA cm^?2, despite the decrease in CO₂ solubility. Furthermore, a significantly high formate concentration of 41.5 g L^?1 is obtained as a one‐path product at 343 K with high PCD (51.7 mA cm^?2) and high Faradaic efficiency (93.3 %) via continuous operation in a full flow cell at a low cell voltage of 2.2 V.     

MOF‐on‐MOF: Oriented Growth of Multiple Layered Thin Films of Metal–Organic Frameworks

The precise alignment of multiple layers of metal–organic framework (MOF) thin films, or MOF‐on‐MOF films, over macroscopic length scales is presented. The MOF‐on‐MOF films are fabricated by epitaxially matching the interface. The first MOF layer (Cu₂(BPDC)₂, BPDC=biphenyl‐4,4′‐dicarboxylate) is grown on an oriented Cu(OH)₂ film by a “one‐pot” approach. Aligned second (Cu₂(BDC)₂, BDC=benzene 1,4‐dicarboxylate, or Cu₂(BPYDC)₂, BPYDC=2,2′‐bipyridine‐5,5′‐dicarboxylate) MOF layers can be deposited using liquid‐phase epitaxy. The co‐orientation of the MOF films is confirmed by X‐ray diffraction. Importantly, our strategy allows for the synthesis of aligned MOF films, for example, Cu₂(BPYDC)₂, that cannot be grown on a Cu(OH)₂ surface. We show that aligned MOF films furnished with Ag nanoparticles show a unique anisotropic plasmon resonance. Our MOF‐on‐MOF approach expands the chemistry of heteroepitaxially oriented MOF films and provides a new toolbox for multifunctional porous coatings.     

Self‐Cleaning Catalyst Electrodes for Stabilized CO2 Reduction to Hydrocarbons

A surface‐restructuring strategy is presented that involves self‐cleaning Cu catalyst electrodes with unprecedented catalytic stability toward CO₂ reduction. Under the working conditions, the Pd atoms pre‐deposited on Cu surface induce continuous morphological and compositional restructuring of the Cu surface, which constantly refreshes the catalyst surface and thus maintains the catalytic properties for CO₂ reduction to hydrocarbons. The Pd‐decorated Cu electrode can catalyze CO₂ reduction with relatively stable selectivity and current density for up to 16 h, which is one of the best catalytic durability performances among all Cu electrocatalysts for effective CO₂ conversion to hydrocarbons. The generality of this approach of utilizing foreign metal atoms to induce surface restructuring toward stabilizing Cu catalyst electrodes against deactivation by carbonaceous species accumulation in CO₂ reduction is further demonstrated by replacing Pd with Rh.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Direct X‐ray Observation of Trapped CO2 in a Predesigned Porphyrinic Metal–Organic Framework

Metal–organic frameworks (MOFs) are emerging microporous materials that are promising for capture and sequestration of CO₂ due to their tailorable binding properties. However, it remains a grand challenge to pre‐design a MOF with a precise, multivalent binding environment at the molecular level to enhance CO₂ capture. Here, we report the design, synthesis, and direct X‐ray crystallographic observation of a porphyrinic MOF, UNLPF‐2, that contains CO₂‐specific single molecular traps. Assembled from an octatopic porphyrin ligand with [Co₂(COO)₄] paddlewheel clusters, UNLPF‐2 provides an appropriate distance between the coordinatively unsaturated metal centers, which serve as the ideal binding sites for in situ generated CO₂. The coordination of Co^II in the porphyrin macrocycle is crucial and responsible for the formation of the required topology to trap CO₂. By repeatedly releasing and recapturing CO₂, UNLPL‐2 also exhibits recyclability.     

Bipyridine‐Assisted Assembly of Au Nanoparticles on Cu Nanowires To Enhance the Electrochemical Reduction of CO2

We report a new strategy to prepare a composite catalyst for highly efficient electrochemical CO₂ reduction reaction (CO₂RR). The composite catalyst is made by anchoring Au nanoparticles on Cu nanowires via 4,4′‐bipyridine (bipy). The Au‐bipy‐Cu composite catalyzes the CO₂RR in 0.1 m KHCO₃ with a total Faradaic efficiency (FE) reaching 90.6 % at ?0.9 V to provide C‐products, among which CH₃CHO (25 % FE) dominates the liquid product (HCOO^?, CH₃CHO, and CH₃COO^?) distribution (75 %). The enhanced CO₂RR catalysis demonstrated by Au‐bipy‐Cu originates from its synergistic Au (CO₂ to CO) and Cu (CO to C‐products) catalysis which is further promoted by bipy. The Au‐bipy‐Cu composite represents a new catalyst system for effective CO₂RR conversion to C‐products.     

Preparation of disk‐like Pt/CeO2‐p‐TiO2 catalyst derived from MIL‐125(Ti) for excellent catalytic performance

A feasible strategy is reported for the synthesis of a disk‐like Pt/CeO₂‐p‐TiO₂ catalyst derived from the titanium‐based metal–organic framework (MOF) MIL‐125(Ti) through a few valid steps. To verify the successful synthesis and structural features of the Pt/CeO₂‐p‐TiO₂ catalyst, as‐prepared samples were characterized using several techniques. The characterizations demonstrated that MOF‐derived porous TiO₂ was appropriate for application as a support owing to its moderate surface area (101 m² g^?1) and suitable pore size (6 nm). Moreover, to study the effect of calcination temperature on the catalytic performance, the obtained catalyst was calcined at various temperatures. It was found that Pt/CeO₂‐p‐TiO₂ calcined at 550 °C exhibited the highest catalytic performance, evaluated by means of the reduction of 4‐nitrophenol monitored by UV–visible spectra. Furthermore, this catalyst showed good reusability with a conversion of 94% even after six cycles. Finally, a possible reaction mechanism was proposed to explain the reduction of 4‐nitrophenol to 4‐aminophenol over the Pt/CeO₂‐p‐TiO₂ catalyst.     

Two‐Dimensional Metal–Organic Framework Nanosheets for Membrane‐Based Gas Separation

Metal–organic framework (MOF) nanosheets could serve as ideal building blocks of molecular sieve membranes owing to their structural diversity and minimized mass‐transfer barrier. To date, discovery of appropriate MOF nanosheets and facile fabrication of high performance MOF nanosheet‐based membranes remain as great challenges. A modified soft‐physical exfoliation method was used to disintegrate a lamellar amphiprotic MOF into nanosheets with a high aspect ratio. Consequently sub‐10 nm‐thick ultrathin membranes were successfully prepared, and these demonstrated a remarkable H₂/CO₂ separation performance, with a separation factor of up to 166 and H₂ permeance of up to 8×10⁻⁷ mol m⁻² s⁻¹ Pa⁻¹ at elevated testing temperatures owing to a well‐defined size‐exclusion effect. This nanosheet‐based membrane holds great promise as the next generation of ultrapermeable gas separation membrane.     

Partially Pyrolyzed Binary Metal–Organic Framework Nanosheets for Efficient Electrochemical Hydrogen Peroxide Synthesis

Herein, we developed a partially controlled pyrolysis strategy to create evenly distributed NiO nanoparticles within NiFe‐MOF nanosheets (MOF NSs) for electrochemical synthesis of H₂O₂ by a two‐electron oxygen reduction reaction (ORR). The elemental Ni can be partially transformed to NiO and uniformly distributed on the surface of the MOF NSs, which is crucial for the formation of the particular structure. The optimized MOF NSs‐300 exhibits the highest activity for ORR with near‐zero overpotential and excellent H₂O₂ selectivity (ca. 99 %) in 0.1 m KOH solution. A high‐yield H₂O₂ production rate of 6.5 mol g_cat^?1 h^?1 has also been achieved by MOF NSs‐300 in 0.1 m KOH and at 0.6 V (vs. RHE). In contrast to completely pyrolyzed products, the enhanced catalytic activities of partially pyrolyzed MOF NSs‐300 originates mainly from the retained MOF structure and the newly generated NiO nanoparticles, forming the coordinatively unsaturated Ni atoms and tuning the performance towards electrochemical H₂O₂ synthesis.