模板水热法纳米TiO2制备及光催化性能研究

以聚乙烯吡咯烷酮(PVP)为模板剂,钛酸四正丁酯(TBOT)为钛源,水热法制备纳米TiO2。采用XRD,SEM、TEM和UV-Vis DRS等测试手段对其形貌和结构进行表征。通过对甲基橙的光催化降解实验,探讨了焙烧温度、催化剂用量和溶液pH值对光催化性能的影响。结果表明,TiO2具有锐钛矿相,平均晶粒尺寸约为23.2 nm,TiO2颗粒呈片层状或由片层状堆积的疏松圆球形,经超声后即分散为八面体晶粒。550℃焙烧的样品,紫外光照3 h后,对甲基橙的降解率可达84.2%。相比普通水热法,采用模板剂法制得的TiO2吸收带发生红移,因而也具有较好的可见光催化活性。     

CeOHCO3和CeO2束状纳米结构的制备及表征

The cantaloupe-like particles of CeOHCO₃ were synthesized in aqueous solution by using cetyltrimethylammonium bromide (CTAB) as soft template. Then, the bunchiness rods of CeO₂ were obtained by calcining CeOHCO₃ at 450 ℃. The results of thermogravimetric/differential thermal analysis reveal that an endothermic reaction with decomposition is involved in the transformation process from CeOHCO₃ to CeO₂. By scanning electron microscopy and X-ray diffraction analysis, it is found that the orthorhombic phase CeOHCO₃ particles are constituted of short nanorods with diameters ranging from several tens nm to over 100 nm, and the cubic phase CeO₂ rods are composed of small particles with diameter ca. 15 nm. From the results of UV-Vis absorption and photoluminescence analysis, it is found that the CeO₂ possess abundant defects, and the band gaps of the CeO₂ and CeOHCO₃ are ca. 2.70 eV and 3.87 eV, respectively.     

Photocatalytic degradation of methyl orange on arrayed porous iron-doped anatase TiO2

Arrayed porous iron-doped TiO₂ was prepared by sol–gel with polystyrene spheres as template and used as photocatalyst for the degradation of methyl orange. The structure and performances of the prepared photocatalyst were characterized with X-ray diffractometer, inductively coupled plasma-atomic emission spectrometer, scanning electron microscope, UV-visible spectrometer, and methyl orange degradation tests. It is found that the iron dopant does not change the crystal phase of TiO₂ but affects its lattice constant, optical absorption, electronic conductivity, charge-transfer resistance, and activity toward the degradation of methyl orange. The sample doped with 0.01 wt.% Fe (based on Ti) and with smaller pore size exhibits the better photocatalytic activity. The degradation rate of methyl orange on the sample with a pore size of 190 nm is 2.3 times that on the undoped sample with the same pore size.     

Oxidative carbonylation of phenol with a Pd-O/CeO2-nanotube catalyst

CeO2 nanotubes (CeO2-NT) were synthesized using carbon nanotubes as template by a liquid phase deposition and hydrothermal method. X-ray diffraction, transmission electron microscopy, and N2 adsorption-desorption were used to characterize the CeO2-NT. The wall of CeO2-NT was composed of small interconnected nanocrystallites ranging from 4 to 9 nm in size. The specific surface area of CeO2-NT was 108.8 m2/g with an outer diameter of 25 nm and length > 300 nm. Supported Pd cata-lyst, Pd-O/CeO2-NT, was prepared using CeO2-NT as the support. Temperature-programmed reduc-tion analysis showed that the surface oxygen on Pd-O/CeO2-NT could be reduced at low tempera-ture, therefore it showed high activity in the reaction. Pd-O/CeO2-NT was used as the catalyst for the oxidative carbonylation of phenol. It has better activity and DPC selectivity than Pd-O/CeO2-P, which was prepared by supporting Pd on zero dimensional CeO2particles. Under the optimized conditions, phenol conversion was 67.7% with 93.3% DPC selectivity with Pd-O/CeO2-NT. However, its catalyt-ic activity decreased when the catalyst was used for the second time. This was attributed to the destruction of the tubular structure of Pd-O/CeO2-NT and Pd leaching during the reaction.     

Microstructural evolution of CeO2 from porous structures to clusters of nanosheet arrays assisted by gas bubbles via electrodeposition

Here we report the preparation of porous CeO2 and clusters of CeO2 nanosheet arrays via a simple, efficient electrochemical approach. Gas bubbles functioning as a dynamic template were utilized in our research for the synthesis of nanosheet array clusters. The Hc and Mr values of porous CeO2 are almost the same as those of CeO2 nanosheet array clusters at 5 K, and they are about 5916 Oe and 8.83 x 10(-4) emu, respectively. However, the saturation magnetization of CeO2 nanosheet array clusters is much larger than that of porous CeO2 structures. The magnetic property of the prepared CeO2 deposits may be caused by the existence of Ce(III), indicating potential interest in the nanodevices because of their electronic and magnetic properties.     

介孔二氧化钛的合成及其对甲基橙降解的光催化活性

以十六烷基三甲基溴化铵为模板剂,通过水解钛酸正丁酯合成了介孔二氧化钛分子筛,探讨了合成条件的影响。采用X射线粉末衍射(XRD)、红外光谱(FT-IR)、透射电子显微镜(TEM)和N2吸附-脱附等技术对介孔二氧化钛的晶相、结构、形貌、比表面积和孔径分布进行了表征。实验结果表明:得到的介孔二氧化钛分子筛的孔径为4-4.3nm,用抽提的方法去除模板剂得到的介孔二氧化钛的比表面积比焙烧的要高。以甲基橙为模型污染物,检验了所合成介孔二氧化钛的光催化性质。     

有序多级孔N/Nd/TiO_2的制备及其在可见光下催化降解甲基橙的性能

以聚苯乙烯为胶晶模板,采用溶胶-凝胶法制备了有序多级孔N/Nd/TiO_2(1),其结构和形貌经SEM,XRD,XPS和N2吸附-脱附表征。研究了1在可见光下催化降解甲基橙的性能。结果表明:1为有序大孔/介孔多级结构,大孔孔道/介孔孔窗呈相互通透三维有序结构,大孔孔道内径约230 nm,介孔孔窗约30 nm,比表面积为125.50 m~2·g~(-1),比孔容为1.124 5 cm~3·g~(-1)。1催化甲基橙的脱色率为42.76%。     

Stabilization of miniemulsion droplets by cerium oxide nanoparticles: a step toward the elaboration of armored composite latexes

Stable methyl methacrylate (MMA) miniemulsions were successfully prepared using for the first time cerium oxide (CeO(2)) nanoparticles as solid stabilizers in the absence of any molecular surfactant. The interaction between MMA droplets and CeO(2) nanoparticles was induced by the use of methacrylic acid (MAA) as a comonomer. Both MAA and CeO(2) contents played a key role on the diameter and the stability of the droplets formed during the emulsification step. Cryo-transmission electron microscopy (TEM) images of the suspensions formed with 35 wt % of CeO(2) showed the presence of polydisperse 50-150 nm spherical droplets. More surprisingly, some nonspherical (likely discoidal) objects that could be the result of the sonication step were also observed. The subsequent polymerization of these Pickering miniemulsion droplets led to the formation of composite PMMA latex particles armored with CeO(2). In all cases, the conversion was limited to ca. 85%, concomitant with a loss of stability of the latex for CeO(2) contents lower than 35 wt %. This stability issues were likely related to the screening of the cationic charges present on CeO(2) nanoparticles upon polymerization. TEM images showed mostly spherical particles with a diameter ranging from 100 to 400 nm and homogeneously covered with CeO(2). Besides, for particles typically larger than 200 nm, a buckled morphology was observed supporting the presence of residual monomer at the end of the polymerization and consistent with the limited conversion. The versatility of these systems was further demonstrated using 35 wt % of CeO(2) and replacing MMA by n-butyl acrylate (BA) either alone or in combination with MMA. Stable monomer emulsions were always obtained, with the droplet size increasing with the hydrophobicity of the oil phase, pointing out the key influence of the wettability of the solid stabilizer. The polymerization of Pickering miniemulsion stabilized by CeO(2) nanoparticles proved to be an efficient strategy to form armored composite latex particles which may find applications in coating technology.     

沉淀剂种类对Ru/CeO2氨合成催化剂结构和性能的影响

采用6种沉淀剂通过共沉淀法制备了6种Ru/CeO2氨合成催化剂, 考察了沉淀剂种类对其氨合成性能的影响. 通过X射线衍射、N2吸附-脱附、X射线荧光光谱和H2程序升温还原等表征手段, 对不同沉淀剂影响Ru/CeO2催化剂氨合成性能的原因进行探讨. 结果表明: 采用(NH4)2CO3和NH4HCO3制备的催化剂样品具有较好的氨合成活性, 其中NH4HCO3为最佳沉淀剂, 所制备的催化剂在450 ℃, 10 MPa , 10000 h－1测试条件下, 出口氨浓度为14.46%. 而采用KHCO3, KOH, K2CO3沉淀剂制备的样品的氨合成活性相对较低. 沉淀剂种类不仅明显地影响钌离子和铈离子的共沉淀, 而且会影响载体二氧化铈表面氧的还原. 由NH4HCO3沉淀剂制备的Ru/CeO2催化剂的高活性归因于钌负载量增大、钌粒子分散度提高以及二氧化铈表面氧易还原三者相互作用的结果.     

Preparation and photocatalytic activity of cuprous oxides

Cuprous oxide (Cu₂O) nanoparticles and microcubes have been successfully fabricated by reduce of CuSO₄ using ascorbic acid at room temperature. The as-synthesized products were easily separation and purification, because there were no template or surfactant has been introduced. All of the samples were characterized by X-ray powder diffractometer (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectrometer (FTIR) and ultraviolet and visible light spectrometer (UV–vis). The microscale Cu₂O samples exhibited a high catalytic activity on photodegradation of methyl orange by visible light. It was found that Cu₂O microcubes have higher photocatalytic activity and the photocatalytic degradation ratio of methyl orange reached to 98.1%.     

三维大孔TiO2光催化剂的制备及其催化性能

 以聚甲基丙烯酸甲酯微球为模板,以钛酸正丁酯为原料,采用溶胶-凝胶法制备了具有三维结构的大孔TiO2. 采用差示扫描量热、热重-微分热重、X射线衍射、红外光谱、扫描电子显微镜和氮气吸附等手段对样品进行了表征. 结果表明,高温热处理后得到的三维大孔TiO2光催化剂的孔径为200 nm左右,孔径分布均匀, TiO2纳米晶粒中锐钛矿相和金红石相的含量分别为82%和18%. 光催化氧化实验表明,此种三维结构的TiO2对甲基橙溶液具有较好的光催化氧化性能.     

双模板法制备具有介孔孔壁的三维有序大孔二氧化铈及其改善的低温还原性能

以聚甲基丙烯酸甲酯(PMMA)为硬模板,三嵌段共聚物F127、十六烷基三甲基溴化铵(CTAB)或聚乙二醇(PEG)为软模板剂(表面活性剂),柠檬酸为络合剂,硝酸铈为金属前驱体,采用双模板法成功地合成出具有介孔孔壁的三维有序大孔(3DOM)结构的立方相CeO2样品CeO2-F127,CeO2-CTAB和CeO2-PEG,...     

Photocatalytic Performance of H6P2W18O62/TiO2 Nanocomposite Encapsulated into Beta Zeolite under UV Irradiation in the Degradation of Methyl Orange

In this work, neat and supported H₆P₂W₁₈O₆₂ into nanocage of β‐zeolite were synthesized. However, H₆P₂W₁₈O₆₂ into nanocage of β‐zeolite was synthesized via template synthesis method. In addition, TiO₂ was supported on H₆P₂W₁₈O₆₂/β zeolite by impregnation method. The obtained materials were characterized by XRD, FT‐IR, UV‐Vis, FESEM and EDS techniques. Also, W and Ti contents of the catalyst were determined by ICP and EDS technique. The results reveal that the photocatalyst performance depends on catalyst loading, pH effect, and methyl orange concentration. Photocatalytic degradation of methyl orange follows a pseudo‐first order kinetic. The chemical oxygen demand (COD) experimental proved mineralization of methyl orange. Another reason for degradation and mineralization of methyl orange is the absence of hydrazine at the end of reaction which is one of the photodecolorization products. The plausible mechanism for photodegradation of MO was proposed.     

Shape evolution and size-controllable synthesis of Cu2O octahedra and their morphology-dependent photocatalytic properties

Octahedral Cu(2)O crystals with tunable edge length were synthesized by reducing copper hydroxide with hydrazine without using any surfactant. Systematic experiments were carried out to investigate the factors which impact on the morphology and size of the products. The molar ratios of the reagents (NH(3):Cu(2+) and OH(-):Cu(2+)) determined the morphology and size of the corresponding products via affecting the coordination between NH(3) and Cu(2+). It is demonstrated that the ratio of growth rate along 111 versus 100 was varied by adjusting the molar ratio of NH(3) to Cu(2+), thus Cu(2)O crystals with different morphologies such as spheres, cubelike, and octahedra were obtained. The edge lengths of octahedra can be easily tuned from 130 to 600 nm by adjusting the molar ratio of OH(-) to Cu(2+). It is an effective and facile method for the controlled synthesis of octahedral Cu(2)O. The obtained octahedral Cu(2)O particles show improved ability on adsorption and photodegradation of methyl orange compared with cubic Cu(2)O particles.     

超分子结构甲基橙插层水滑石的组装及其光热稳定性研究

甲基橙是一种酸性染料,但因为它的光和热稳定性较差,使其应用范围和使用效果受到了一定限制.以Mg_0.67Al_0.33(OH)₂(CO₃)_0.165·0.58H₂OLDHs为前体,采用离子交换法,将甲基橙插入到LDHs层间,借助XRD,FTIR,UV-Vis和TG-DTA等手段对样品进行表征.结果表明,甲基橙阴离子可以完全取代前体层间的CO₃^2-离子,组装得到晶体结构良好的甲基橙插层LDHs.对其结构进行研究发现,LDHs主体层板与客体甲基橙阴离子之间存在静电吸引、氢键和其它弱化学键相互作用,具有超分子结构特征.该超分子结构材料不仅保持了甲基橙本身的颜色,而且与甲基橙相比,其耐光性和耐热性均有大幅度的提高.     

Fe3O4@HTlc的制备及其对甲基橙的吸附研究

采用液相非稳态共沉淀法制备了磁性镁铝类水滑石(Fe3O4@HTlc),采用透射电子显微镜、粉末X射线衍射仪、傅里叶变换红外光谱仪、振动样品磁强计、比表面分析仪、微电泳仪等对样品的形貌和结构进行了表征,并比较了 Fe3O4@HTlc和HTlc对甲基橙的吸附性能。结果表明,Fe3O4@HTlc为顺磁性、具有核-壳结构和较大比表面积、带有正电荷的近球状颗粒。甲基橙在Fe3O4@HTlc和HTlc上的吸附动力学曲线均符合准一级动力学方程;吸附等温线均符合Langmuir吸附等温式;298 K时Fe3O4@HTlc和HTlc对甲基橙的饱和吸附量分别为138.89和147.06 mg/g,但Fe3O4@HTlc对甲基橙有较强吸附推动力和较短的吸附平衡时间。二者对甲基橙的吸附量均随温度的升高和pH (5~11)的增加而降低。     

Methane reforming With CO2 to syngas over CeO2-promoted Ni/Al2O3-ZrO2 catalysts Prepared Via a direct sol-gel process

CeO2-promoted Ni/Al2O3-ZrO2 (Ni/Al2O3-ZrO2-CeO2) catalysts were prepared by a direct sol-gel process with citric acid as gelling agent. The catalysts used for the methane reforming with CO2 was studied by infrared spectroscopy (IR), thermal gravimetric analysis (TGA), microscopic analysis, X-ray diffraction (XRD) and temperature-programmed reduction (TPR). The catalytic performance for CO2 reforming of methane to synthesis gas was investigated in a continuous-flow micro-reactor under atmospheric pressure. TGA, IR, XRD and microscopic analysis show that the catalysts prepared by the direct sol-gel process consist of Ni particles with a nanostructure of around 5 nm and an amorphous-phase composite oxide support. There exists a chemical interaction between metallic Ni particles and supports, which makes metallic Ni well dispersed, highly active and stable. The addition of CeO2 effectively improves the dispersion and the stability of Ni particles of the prepared catalysts, and enhances the adsorption of CO2 on the surface of catalysts. The catalytic tests for methane reforming with CO2 to synthesis gas show that the Ni/Al2O3-ZrO2-CeO2 catalysts show excellent activity and stability compared with the Ni/Al2O3 catalyst. The excellent catalytic activity and stability of the Ni/Al2O3-ZrO2-CeO2 are attributed to the highly, uniformly and stably dispersed small metallic Ni particles, the high reducibility of the Ni oxides and the interaction between metallic Ni particles and the composite oxide supports.     

氧化铈负载钌催化剂中钌表面密度对氨合成活性和氢中毒的影响

氨是关系国计民生的大宗化学品,也是氢能源的重要载体.目前,世界合成氨工业每年消耗约2％的世界总能源,并排放超过1％的CO2,节能降耗需求十分迫切,其中的关键在于高性能氨合成催化剂的开发.传统观点认为,B5活性位是钌催化剂上氮解离和氨合成的活性位,当钌粒子尺寸在1.8～2.5 nm时催化剂的B5活性位数量最多,而钌尺寸较小(0.7～0.8 nm)的催化剂几乎没有氨合成活性.本文通过改变钌负载量调变了氧化铈负载钌催化剂的钌表面浓度,证实钌粒子尺寸低于2.0nm时,氧化铈负载钌催化剂也具有较高的氨合成活性.XPS等表征结果证实:钌表面密度低于0.68 Ru nm-2时,钌主要以层状形式存在于氧化铈表面,层状钌与氧化铈紧密接触,电子从氧化铈的缺陷位传递给钌物种,在这种情况下,Ru 3d5/2的结合能有所下降,氮解离能力增强,这有利于提高催化剂的氨合成活性;当钌表面密度约为0.68 Ru nm-2时,钌金属传递电子给氧化铈,此时Ru 3d5/2结合能有所增加;当钌表面密度高于1.4 Ru nm-2后,钌物种优先在层状钌表面聚集成大尺寸钌纳米粒子,此时催化剂中同时存在钌团簇和钌纳米粒子,氧化铈载体对钌粒子电子性质的影响减弱,因此大尺寸钌金属颗粒Ru 3d5/2结合能又有所下降.另一方面,氢分子会在氧化铈表面形成均裂产物(两个OH基团)或异裂产物(Ce-H和OH).同时氢分子还会在0价钌金属表面解离形成氢原子,并进一步溢流到氧化铈表面与氧原子作用形成羟基.钌活性位上的氢物种比氧化铈中的氢更容易脱附,因此氧化铈中钌的存在不仅可以增强其氢吸附量,还降低了氢物种的吸附强度.当钌表面密度低时,氧化铈与钌的相互作用较强,催化剂中的氢物种容易溢流到氧化铈中形成羟基基团,此时催化剂的氢吸附能力增强,氢中毒问题较显著.当钌表面密度较高时,氢原子在大尺寸钌颗粒上移动、反应和脱附,因此催化剂的氢中毒问题也得到显著缓解.总之,对于氧化铈负载钌催化剂,氧化铈与钌金属之间的电子相互作用以及其吸附性质都会影响催化剂的氨合成活性,因此钌表面密度低于0.31 Ru nm-2以及约为2.1 Ru nm-2时,催化剂都展现出了较高的氨合成活性.本文将为设计制备高性能钌基氨合成催化剂提供理论指导.     

Monolithic macroporous catalysts--a new route for miniaturization of water-gas shift reactor

Monolithic macroporous Pt/CeO2/Al2O3 catalysts were prepared using concentrated emulsions synthesis route, and the obtained samples were characterized with SEM, TG, TEM, XRD and TPR techniques. These monolithic catalysts were applied to water gas shift (WGS) reaction in reformed gases. The SEM and TEM results indicated that the monoliths possessed macroporosity, and that the platinum particles homogeneously dispersed on the supports with the particle size in the range of 1−2 nm. The reducibility of the catalysts was characterized by TPR method, and it was shown that the monolithic PtOx/CeO2/Al2O3 exhibited the similar reducibility property to that of the particle PtOx/CeO2 reported in literatures. The CO conversion over the monolithic catalysts is higher than that over micro-reactor catalysts for WGS reaction in the reformed gases conditions, indicating that the monolithic macroporous catalysts is a potential new route for miniaturization of WGS reactor.     

Biomimetic deposition of silica templated by a cationic polyamine-containing microgel

We report using poly(acrylamide-co-2-(dimethylamino)ethyl methacrylate, methyl chloride quaternized) cationic microgels as a porous colloidal template for biomimetic in situ silica mineralization, allowing the well-controlled synthesis of submicrometer-sized hybrid microgel--silica particles and porous silica particles by subsequent calcination. The microgels were prepared by inverse emulsion polymerization in the presence of a bisacrylamide cross-linker. Silica deposition was achieved by simply stirring an aqueous mixture of the microgel particles and tetramethyl orthosilicate (TMOS) at 20 degrees C for 30 min. No experimental evidence was found for nontemplated silica, which indicated that silica deposition occurred exclusively within the cationic microgel template particles. The resulting microgel-silica hybrid particles were characterized by electron microscopy, dynamic light scattering, FT-IR spectroscopy, 1H NMR and solid-state 29Si magic angle spinning NMR spectroscopy, thermogravimetry, aqueous electrophoresis, and surface area measurements. Aqueous electrophoresis studies confirmed that the hybrid microgel-silica particles had positive zeta potentials over a wide pH range and isoelectric points could be tuned by varying the synthesis conditions. This suggests that these particles could form complexes with DNA for improved gene delivery. The porosity of the calcined silica particles could be controlled by varying the amount of TMOS, suggesting potential encapsulation/controlled release applications.