π-Interactions between Cyclic Carbocations and Aromatics Cause Zeolite Deactivation in Methanol-to-Hydrocarbon Conversion

The understanding of catalyst deactivation represents one of the major challenges for the methanol-to-hydrocarbon (MTH) reaction over acidic zeolites. Here we report the critical role of intermolecular π-interactions in catalyst deactivation in the MTH reaction on zeolites H-SSZ-13 and H-ZSM-5. π-interaction-induced spatial proximities between cyclopentenyl cations and aromatics in the confined channels and/or cages of zeolites are revealed by two-dimensional solid-state NMR spectroscopy. The formation of naphtalene as a precursor to coke species is favored due to the reaction of aromatics with the nearby cyclopentenyl cations and correlates with both acid density and zeolite topology.     

Disentangling Reaction Processes of Zeolites within Single‐Oriented Channels

Establishing structure–reactivity relationships for specific channel orientations of zeolites is vital to developing new, superior materials for various applications, including oil and gas conversion processes. Herein, a well‐defined model system was developed to build structure–reactivity relationships for specific zeolite‐channel orientations during various catalytic reaction processes, for example, the methanol‐ and ethanol‐to‐hydrocarbons (MTH and ETH) process as well as oligomerization reactions. The entrapped and effluent hydrocarbons from single‐oriented zeolite ZSM‐5 channels during the MTH process were monitored by using operando UV/Vis diffuse reflectance spectroscopy (DRS) and on‐line mass spectrometry (MS), respectively. The results reveal that the straight channels favor the formation of internal coke, promoting the aromatic cycle. Furthermore, the sinusoidal channels produce aromatics, (e.g., toluene) that further grow into larger polyaromatics (e.g., graphitic coke) leading to deactivation of the zeolites. This underscores the importance of careful engineering of materials to suppress coke formation and tune product distribution by rational control of the location of zeolite acid sites and crystallographic orientations.     

New Insight into the Hydrocarbon‐Pool Chemistry of the Methanol‐to‐Olefins Conversion over Zeolite H‐ZSM‐5 from GC‐MS,Solid‐State NMR Spectroscopy,and DFT Calculations

Over zeolite H‐ZSM‐5, the aromatics‐based hydrocarbon‐pool mechanism of methanol‐to‐olefins (MTO) reaction was studied by GC‐MS, solid‐state NMR spectroscopy, and theoretical calculations. Isotopic‐labeling experimental results demonstrated that polymethylbenzenes (MBs) are intimately correlated with the formation of olefin products in the initial stage. More importantly, three types of cyclopentenyl cations (1,3‐dimethylcyclopentenyl, 1,2,3‐trimethylcyclopentenyl, and 1,3,4‐trimethylcyclopentenyl cations) and a pentamethylbenzenium ion were for the first time identified by solid‐state NMR spectroscopy and DFT calculations under both co‐feeding ([¹³C₆]benzene and methanol) conditions and typical MTO working (feeding [¹³C]methanol alone) conditions. The comparable reactivity of the MBs (from xylene to tetramethylbenzene) and the carbocations (trimethylcyclopentenyl and pentamethylbenzium ions) in the MTO reaction was revealed by ¹³C‐labeling experiments, evidencing that they work together through a paring mechanism to produce propene. The paring route in a full aromatics‐based catalytic cycle was also supported by theoretical DFT calculations.     

Cobalt‐Catalyzed Formal [4+2] Cycloaddition of α,α′‐Dichloro‐ortho‐Xylenes with Alkynes

A formal [4+2] cycloaddition of α,α′‐dichloro‐ortho‐xylenes with various alkynes has been developed using a low‐valent cobalt catalyst. The transformation has a wide substrate scope and high functional‐group tolerance and led to 1,4‐dihydronaphthalenes. The formed cycloadducts were easily aromatized with MnO₂ under air. A mechanistic investigation suggests that the transformation proceeds through a benzyl cobaltation of alkyne, not the classical Diels–Alder reaction of ortho‐quinodimethanes. This methodology provides a straightforward and streamlined access to linearly expanded π‐conjugated aromatics.     

Large Zeolite H‐ZSM‐5 Crystals as Models for the Methanol‐to‐Hydrocarbons Process: Bridging the Gap between Single‐Particle Examination and Bulk Catalyst Analysis

The catalytic, deactivation, and regeneration characteristics of large coffin‐shaped H‐ZSM‐5 crystals were investigated during the methanol‐to‐hydrocarbons (MTH) reaction at 350 and 500 °C. Online gas‐phase effluent analysis and examination of retained material thereof were used to explore the bulk properties of large coffin‐shaped zeolite H‐ZSM‐5 crystals in a fixed‐bed reactor to introduce them as model catalysts for the MTH reaction. These findings were related to observations made at the individual particle level by using polarization‐dependent UV‐visible microspectroscopy and mass spectrometric techniques after reaction in an in situ microspectroscopy reaction cell. Excellent agreement between the spectroscopic measurements and the analysis of hydrocarbon deposits by means of retained hydrocarbon analysis and time‐of‐flight secondary‐ion mass spectrometry of spent catalyst materials was observed. The obtained data reveal a shift towards more condensed coke deposits on the outer zeolite surface at higher reaction temperatures. Zeolites in the fixed‐bed reactor setup underwent more coke deposition than those reacted in the in situ microspectroscopy reaction cell. Regeneration studies of the large zeolite crystals were performed by oxidation in O₂/inert gas mixtures at 550 °C. UV‐visible microspectroscopic measurements using the oligomerization of styrene derivatives as probe reaction indicated that the fraction of strong acid sites decreased during regeneration. This change was accompanied by a slight decrease in the initial conversion obtained after regeneration. H‐ZSM‐5 deactivated more rapidly at higher reaction temperature.     

Rapid Access to Nanographenes and Fused Heteroaromatics by Palladium‐Catalyzed Annulative π‐Extension Reaction of Unfunctionalized Aromatics with Diiodobiaryls

Efficient and rapid access to nanographenes and π‐extended fused heteroaromatics is important in materials science. Herein, we report a palladium‐catalyzed efficient one‐step annulative π‐extension (APEX) reaction of polycyclic aromatic hydrocarbons (PAHs) and heteroaromatics, producing various π‐extended aromatics. In the presence of a cationic Pd complex, triflic acid, silver pivalate, and diiodobiaryls, diverse unfunctionalized PAHs and heteroaromatics were directly transformed into larger PAHs, nanographenes, and π‐extended fused heteroaromatics in a single step. In the reactions that afford [5]helicene substructures, simultaneous dehydrogenative ring closures occur at the fjord regions to form unprecedented larger nanographenes. This successive APEX reaction is notable as it stiches five aryl–aryl bonds by C−H functionalization in a single operation. Moreover, the unique molecular structures, crystal‐packing structures, photophysical properties, and frontier molecular orbitals of the thus‐formed nanographenes were elucidated.     

Unraveling the Homologation Reaction Sequence of the Zeolite‐Catalyzed Ethanol‐to‐Hydrocarbons Process

Although industrialized, the mechanism for catalytic upgrading of bioethanol over solid‐acid catalysts (that is, the ethanol‐to‐hydrocarbons (ETH) reaction) has not yet been fully resolved. Moreover, mechanistic understanding of the ETH reaction relies heavily on its well‐known “sister‐reaction” the methanol‐to‐hydrocarbons (MTH) process. However, the MTH process possesses a C₁‐entity reactant and cannot, therefore, shed any light on the homologation reaction sequence. The reaction and deactivation mechanism of the zeolite H‐ZSM‐5‐catalyzed ETH process was elucidated using a combination of complementary solid‐state NMR and operando UV/Vis diffuse reflectance spectroscopy, coupled with on‐line mass spectrometry. This approach establishes the existence of a homologation reaction sequence through analysis of the pattern of the identified reactive and deactivated species. Furthermore, and in contrast to the MTH process, the deficiency of any olefinic‐hydrocarbon pool species (that is, the olefin cycle) during the ETH process is also noted.     

Synthesis of ϵ‐Caprolactam from Cyclohexanone Oxime Using Zeolites Hβ, HZSM‐5, and Alumina Pillared Montmorillonite

The Beckmann rearrangement of cyclohexanone oxime (CHO) to ?‐caprolactam (?‐C) was studied in a plug flow reactor at 300–400°C under atmospheric pressure by using Hβ, ZSM‐5, and alumina pillared montmorillonite. With Hβ(X) Y zeolites, raising the SiO₂/Al₂O₃ molar ratio (X) results in the enhancement of catalyst acid strength with concomitant decrease of the total acid amount. In creasing the calcination temperature (Y) causes remarkable diminution of catalyst surface area, acid strength, and acid amount. A similar trend was found for AlPMY catalysts. In there action of CHO, the initial catalytic activity correlates well with the total acid amount of various catalysts except for Hβ(10) Y (Y > 600°C). The reaction proceeds on both Brönsted and Lewis acid sites and the catalyst deactivation most likely occurs at the strong Brönsted acid sites. The effect of solvents in the feed on the catalytic results was also investigated; it was found that polar solvents such as ethanol or n‐butanol give high ?‐C yield and longer catalyst life time. In the reaction of CHO/C₂H₅OH over Hβ(10)800 at 400°C and W/F 74.6 gh/mol, the CHO conversion and ?‐C yield remain 100% and 92%, respectively, for at least 20 h time‐on‐stream. The reaction paths and the mechanism for ?‐C formation are proposed.     

Palladium‐Catalyzed Construction of Heteroatom‐Containing π‐Conjugated Systems by Intramolecular Oxidative CH/CH Coupling Reaction

Synthesis of heteroatom‐containing ladder‐type π‐conjugated molecules was successfully achieved via a palladium‐catalyzed intramolecular oxidative C?H/C?H cross‐coupling reaction. This reaction provides a variety of π‐conjugated molecules bearing heteroatoms, such as nitrogen, oxygen, phosphorus, and sulfur atoms, and a carbonyl group. The π‐conjugated molecules were synthesized efficiently, even in gram scale, and larger π‐conjugated molecules were also obtained by a double C?H/C?H cross‐coupling reaction and successive oxidative cycloaromatization.     

Synthesis of Extended π‐Systems through C–H Activation

Activation of aromatic C? H bonds by a transition metal catalyst has received significant attention in the synthetic chemistry community. In recent years, rapid and site‐selective extension of π‐electron systems by C–H activation has emerged as an ideal methodology for preparing organic materials with extended π‐systems. This Review focuses on recently reported π‐extending C–H activation reactions directed toward new optoelectronic conjugated materials.     

Calculated geometries of dications of bis odd‐membered π‐ring systems containing a NCN fragment and related π‐systems. An opposite out‐of‐plane rotation of the 4n π‐ring subsystems

Quantum chemical calculations have been carried out on dications of bis odd‐membered π‐ring systems containing a NCN fragment and related π‐systems. An opposite out‐of‐plane rotation of both subsystems was found if these systems contain 4n π‐electrons (antiaromatic). A planar situation was found for 4n+2 π‐electrons (aromatic). The geometric representations could be compared with X‐ray crystallographic three‐dimensional structures of related compounds. Calculations at different levels clearly show that separation of the σ‐ and π‐electron contribution is an effective way to elucidate the origin of the geometrical changes. We also give attention to some fundamental aspects of the subsystems related to the 1,3‐azolium cations because of their biochemical relevance such as fast C₂? H proton exchange. We postulate that at least two molecules of water are involved in this process. The significance of a trigonal pyramidal (TP) geometry has been emphasized. © 2001 Wiley Periodicals, Inc. Int J Quantum Chem, 2001     

Mono‐ and Bis(imidazolidinium ethynyl) Cations and Reduction of the Latter To Give an Extended Bis‐1,4‐([3]Cumulene)‐p‐carboquinoid System

An extended π‐system containing two [3]cumulene fragments separated by a p‐carboquinoid and stabilized by two capping N‐heterocyclic carbenes (NHCs) has been prepared. Mono‐ and bis(imidazolidinium ethynyl) cations have also been synthesized from the reaction of an NHC with phenylethynyl bromide or 1,4‐bis(bromoethynyl)benzene. Cyclic voltammetry coupled with synthetic and structural studies showed that the dication is readily reduced to a neutral, singlet bis‐1,4‐([3]cumulene)‐p‐carboquinoid as a result of the π‐accepting properties of the capping NHCs.     

One‐Step Annulative π‐Extension of Alkynes with Dibenzosiloles or Dibenzogermoles by Palladium/o‐chloranil Catalysis

Reliable and short synthetic routes to polycyclic aromatic hydrocarbons and nanographenes are important in materials science. Herein, we report an efficient one‐step annulative π‐extension reaction of alkynes that provides access to diarylphenanthrenes and related nanographene precursors. In the presence of a cationic palladium/o ‐chloranil catalyst system and dibenzosiloles or dibenzogermoles as π‐extending agents, a variety of diarylacetylenes are transformed successfully into 9,10‐diarylphenanthrenes in a single step with good functional‐group tolerance. Furthermore, double π‐extension reactions of 1,4‐bis(phenylethynyl)benzene and diphenyl‐1,3‐butadiyne are demonstrated, affording oligoarylene products, which show potential for application in the synthesis of larger polycyclic aromatic hydrocarbons and nanographenes.     

Synthesis of Nitrogen‐Containing Polyaromatics by Aza‐Annulative π‐Extension of Unfunctionalized Aromatics

Nitrogen‐containing polycyclic aromatic compounds (N‐PACs) are an important class of compounds in materials science. Reported here is a new aza‐annulative π‐extension (aza‐APEX) reaction that allows rapid access to a range of N‐PACs in 11–84 % yields from readily available unfunctionalized aromatics and imidoyl chlorides. In the presence of silver hexafluorophosphate, arenes and imidoyl chlorides couple in a regioselective fashion. The follow‐up oxidative treatment with p‐chloranil affords structurally diverse N‐PACs, which are very difficult to synthesize. DFT calculations reveal that the aza‐APEX reaction proceeds through the formal [4+2] cycloaddition of an arene and an in situ generated diarylnitrilium salt, with sequential aromatizations having relatively low activation energies. Transformation of N‐PACs into nitrogen‐doped nanographenes and their photophysical properties are also described.     

Formation and Fate of Formaldehyde in Methanol‐to‐Hydrocarbon Reaction: In Situ Synchrotron Radiation Photoionization Mass Spectrometry Study

HCHO has been confirmed as an active intermediate in the methanol‐to‐hydrocarbon (MTH) reaction, and is critical for interpreting the mechanisms of coke formation. Here, HCHO was detected and quantified during the MTH process over HSAPO‐34 and HZSM‐5 by in situ synchrotron radiation photoionization mass spectrometry. Compared with conventional methods, excellent time‐resolved profiles were obtained to study the formation and fate of HCHO, and other products during the induction, steady‐state reaction, and deactivation periods. Similar formation trends of HCHO and methane, and their close correlation in yields suggest that they are derived from disproportionation of methanol at acidic sites. In the presence of Y₂O₃, the amount of HCHO changes, affecting the hydrogen‐transfer processes of olefins into aromatics and aromatics into cokes. The yield of HCHO affects the aromatic‐based cycle and the formation of ethylene, indicating that ethylene is mainly formed from the aromatic‐based cycle.     

Bridging the Gap between the Direct and Hydrocarbon Pool Mechanisms of the Methanol‐to‐Hydrocarbons Process

After a prolonged effort over many years, the route for the formation of a direct carbon?carbon (C?C) bond during the methanol‐to‐hydrocarbon (MTH) process has very recently been unveiled. However, the relevance of the “direct mechanism”‐derived molecules (that is, methyl acetate) during MTH, and subsequent transformation routes to the conventional hydrocarbon pool (HCP) species, are yet to be established. This important piece of the MTH chemistry puzzle is not only essential from a fundamental perspective, but is also important to maximize catalytic performance. The MTH process was probed over a commercially relevant H‐SAPO‐34 catalyst, using a combination of advanced solid‐state NMR spectroscopy and operando UV/Vis diffuse reflectance spectroscopy coupled to an on‐line mass spectrometer. Spectroscopic evidence is provided for the formation of (olefinic and aromatic) HCP species, which are indeed derived exclusively from the direct C?C bond‐containing acetyl group of methyl acetate. New mechanistic insights have been obtained from the MTH process, including the identification of hydrocarbon‐based co‐catalytic organic reaction centers.     

Ion‐Pairing Assemblies Based on Pentacyano‐Substituted Cyclopentadienide as a π‐Electronic Anion

Pentacyanocyclopentadienide (PCCp^?), a stable π‐electronic anion, provided various ion‐pairing assemblies in combination with various cations. PCCp^?‐based assemblies exist as single crystals and mesophases owing to interionic interactions with π‐electronic and aliphatic cations with a variety of geometries, substituents, and electronic structures. Single‐crystal X‐ray analysis revealed that PCCp^? formed cation‐dependent arrangements with contributions from charge‐by‐charge and charge‐segregated assembly modes for ion pairs with π‐electronic and aliphatic cations, respectively. Furthermore, some aliphatic cations gave dimension‐controlled organized structures with PCCp^?, as observed in the mesophases, for which synchrotron XRD analysis suggested the formation of charge‐segregated modes. Noncontact evaluation of conductivity for (C₁₂H₂₅)₃MeN⁺ ? PCCp^? films revealed potential hole‐transporting properties, yielding a local‐scale hole mobility of 0.4 cm² V^?1 s^?1 at semiconductor–insulator interfaces.     

Transition‐Metal‐Free Synthesis of 1,3‐Butadiene‐Containing π‐Conjugated Polymers

This work describes the synthesis of π‐conjugated polymers possessing arylene and 1,3‐butadiene alternating units in the main chain by the reaction of α,β‐unsaturated ester/nitrile containing γ‐H with aromatic/heteroaromatic aldehyde compound. By using 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester as a model monomer, the different polymerization conditions, including catalyst, catalyst amount, and solvent, are optimized. The polymerization of 4‐(4‐formylphenyl)‐2‐butylene acid ethyl ester is carried out by refluxing in ethanol for 72 h with 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU) as a catalyst to give a 1,3‐butadiene‐containing π‐conjugated polymer, poly(phenylene‐1,3‐butadiene), in 84.3% yield with and / (PDI) estimated as 6172 and 1.65, respectively. Based on this new methodology, a series of π‐conjugated polymers containing 1,3‐butadiene units with different substituents are obtained in high yields. A possible mechanism is proposed for the polymerization through a six‐membered ring transition state and then a 1,5‐H shift intermediate.

     

Disentangling Reaction Processes of Zeolites within Single-Oriented Channels

Establishing structure–reactivity relationships for specific channel orientations of zeolites is vital to developing new, superior materials for various applications, including oil and gas conversion processes. Herein, a well-defined model system was developed to build structure–reactivity relationships for specific zeolite-channel orientations during various catalytic reaction processes, for example, the methanol- and ethanol-to-hydrocarbons (MTH and ETH) process as well as oligomerization reactions. The entrapped and effluent hydrocarbons from single-oriented zeolite ZSM-5 channels during the MTH process were monitored by using operando UV/Vis diffuse reflectance spectroscopy (DRS) and on-line mass spectrometry (MS), respectively. The results reveal that the straight channels favor the formation of internal coke, promoting the aromatic cycle. Furthermore, the sinusoidal channels produce aromatics, (e.g., toluene) that further grow into larger polyaromatics (e.g., graphitic coke) leading to deactivation of the zeolites. This underscores the importance of careful engineering of materials to suppress coke formation and tune product distribution by rational control of the location of zeolite acid sites and crystallographic orientations.     

Direct Mechanism of the First Carbon–Carbon Bond Formation in the Methanol‐to‐Hydrocarbons Process

In the past two decades, the reaction mechanism of C−C bond formation from either methanol or dimethyl ether (DME) in the methanol‐to‐hydrocarbons (MTH) process has been a highly controversial issue. Described here is the first observation of a surface methyleneoxy analogue, originating from the surface‐activated DME, by in situ solid‐state NMR spectroscopy, a species crucial to the first C−C bond formation in the MTH process. New insights into the first C−C bond formation were provided, thus suggesting DME/methanol activation and direct C−C bond formation by an interesting synergetic mechanism, involving C−H bond breakage and C−C bond coupling during the initial methanol reaction within the chemical environment of the zeolite catalyst.