Saturated Bioisosteres of ortho-Substituted Benzenes

Saturated bioisosteres of ortho-disubstituted benzenes (bicyclo[2.1.1]hexanes) were synthesized, characterized and validated. These cores were incorporated into the bioactive compounds Valsartan, Boskalid and Fluxapyroxad instead of the benzene ring. The saturated analogues showed a similar level of antifungal activity compared to that of Boskalid and Fluxapyroxad.     

1,3‐Difunctionalizations of [1.1.1]Propellane via 1,2‐Metallate Rearrangements of Boronate Complexes

1,3‐Disubstituted bicyclo[1.1.1]pentanes (BCPs) are valuable bioisosteres of para‐substituted aromatic rings. The most direct route to these structures is via multicomponent ring‐opening reactions of [1.1.1]propellane. However, challenges associated with these transformations mean that difunctionalized BCPs are more commonly prepared by multistep reaction sequences with BCP‐halide intermediates. Herein, we report three‐ and four‐component 1,3‐difunctionalizations of [1.1.1]propellane with organometallic reagents, organoboronic esters, and a variety of electrophiles. This process is achieved by trapping intermediate BCP‐metal species with boronic esters to form boronate complexes, which are versatile intermediates whose electrophile‐induced 1,2‐metallate rearrangement chemistry enables a broad range of C?C bond‐forming reactions.     

Water-Soluble Non-Classical Benzene Mimetics

A new generation of saturated benzene mimetics, 2-oxabicyclo[2.1.1]hexanes, was developed. These compounds were designed as analogues of bicyclo[1.1.1]pentane with an improved water solubility. Crystallographic analysis of 2-oxabicyclo[2.1.1]hexanes revealed that they occupy a novel chemical space, but, at the same time, resemble the motif of meta-disubstituted benzenes.     

Sodium Bicyclo[1.1.1]pentanesulfinate: A Bench-Stable Precursor for Bicyclo[1.1.1]pentylsulfones and Bicyclo- [1.1.1]pentanesulfonamides

Herein, we present the synthesis of the bench-stable sodium bicyclo[1.1.1]pentanesulfinate (BCP-SO₂Na) and its application in the synthesis of bicyclo[1.1.1]pentyl (BCP) sulfones and sulfonamides. The salt can be obtained in a four-step procedure from commercially available precursors in multigram scale without the need for column chromatography or crystallization. Sulfinates are known to be useful precursors in radical and nucleophilic reactions and are widely used in medicinal chemistry. This building block enables access to BCP sulfones and sulfonamides avoiding the volatile [1.1.1]propellane which is favorable for the extension of SAR studies. Further, BCP-SO₂Na enables the synthesis of products that were not available with previous methods. A chlorination of BCP-SO₂Na and subsequent reaction with a Grignard reagent provides a new route to BCP sulfoxides. Several products were analyzed by single-crystal X-ray diffraction.     

C3(SINGLE BOND)Mα Bond contribution to polarizability tensor and 3J(C1Mα) NMR coupling constant in 1-X-3-M-bicyclo[1.1.1]pentanes

In the present work, the relationship between the large substituent effects on ³J(C₁H) in 1-X-3-M-bicyclo[1.1.1]pentanes, I , and the polarizability of the bridgehead C₃(SINGLE BOND)M_α bond is investigated. The existence of such a relationship is suggested by the finding that the effect of an electronegative substituent X on ³J(C₁M_α) couplings in I (M=H) is due to a distortion of the C₃(SINGLE BOND)H bond toward the C₁ center, which enhances the Fermi contact interaction. If such distortion originates in an electrostatic effect, then in other members of this series it can be expected that the substituent effects on ³J(C₁M_α) couplings should depend strongly on the C₃(SINGLE BOND)M_α bond polarizability. Two approaches are followed. First, the ab initio CLOPPA-IPPP method is applied to study the C₃(SINGLE BOND)M_α bond contribution to the molecular static polarizability tensor in I (M=H, F, CH₃). Such bond polarizabilities are found to follow the same trend as calculated as well as experimentally determined substituent effects on ³J(C₁M_α) couplings, which were measured as part of this work in I [X=H, Cl; M=F, CH₃ and X=OCH₃; M=Sn(CH₃)₃]. Second, ³J(C₁M_α) couplings (M=H, CH₃) are calculated at an ab initio level for X=H, F, and they are compared with those obtained in the parent compound (X=H) if the calculation is carried out in the presence of an inhomogeneous electric field. © 1998 John Wiley & Sons, Inc. J Comput Chem 19: 181–188, 1998     

Experimental and DFT studies on the transmission mechanisms of analogous NMR JCH and JCC couplings in 1-X- and 1-X-3-methylbicyclo[1.1.1]-pentanes

The main aim of this work is to compare the transmission mechanisms for the Fermi contact term of spin-spin couplings, SSCCs, in series 1-X-bicyclo[1.1.1]-pentane, (1), and 1-X-3-methylbicyclo[1.1.1]pentane, (2), and from that comparison to gain insight into some subtle aspects of the FC transmission. To this end, 18 members of the latter series were isotopically enriched in (13)C at the methyl position and the following couplings were measured; 1JC3CMe, 3JC1CMe and 4JCXCMe. These three types of SSCCs in (2) are compared, respectively, with 1JC3H3, 3JC1H3 and 4JCXH in (1); these latter values were taken from previous works. Since electron delocalization plays an important role in the transmission of the FC interaction, the natural bond orbital (NBO) method is employed to quantify electron delocalization interactions within selected members of series (1) and (2). It is found that 1JC3H3 SSCCs in (1) is more efficiently transmitted than 1JC3CMe SSCCs in (2). On the other hand, 3JC1H3 and 4JCXH SSCCs in (1) are notably less efficiently transmitted than 3JC1CMe and 4JCXCMe SSCCs in (2), although substituent effects on these two SSCCs show the opposite trends. These different efficiencies are rationalized in terms of different sigma-hyperconjugative interactions in both series of compounds.     

Si3S-, Si3Se-, Si3Te-Bicyclo[1.1.0]butanes and Si3S2-Bicyclo[1.1.1]pentane

The reaction of trisilirene 1 with propylene sulfide or elemental sulfur produced Si₃S-bicyclo[1.1.0]butane 2, which underwent Si–Si insertion of a second S atom forming Si₃S₂-bicyclo[1.1.1]pentane 3. Analogous reactions of 1 with elemental Se or Te resulted in the formation of heavier analogues of 2, namely, Si₃Se-bicyclo[1.1.0]butane 4 and Si₃Te-bicyclo[1.1.0]butane 5.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT     

Ionic‐Liquid‐Derived,Water‐Soluble Ionic Cellulose

A new type of water‐soluble ionic cellulose was obtained by means of the dissolution of cellulose in dimethylimidazolium methylphosphite at elevated temperatures over 120 °C. FTIR spectroscopy, ¹H and ¹³C NMR spectroscopy, and elemental analysis results revealed that the repeating unit of the water‐soluble cellulose consists of a dialkylimidazolium cation and a phosphite anion bonded to cellulose. The degree of phosphorylation on the cellulose chain was between 0.4 and 1.3 depending on the reaction temperature and time. With an increasing degree of phosphorylation, water solubility was increased. Scanning electron microscopy and X‐ray diffraction analyses revealed that the cellulose crystalline phase in the parent crystalline cellulose changed to an amorphous phase upon transformation into ionic cellulose. Thermogravimetric analysis showed the prepared phosphorylated cellulose was stable over 250 °C and a substantial amount of residue remained at 500 °C.     

Single Benzene Green Fluorophore: Solid‐State Emissive,Water‐Soluble,and Solvent‐ and pH‐Independent Fluorescence with Large Stokes Shifts

Benzene is the simplest aromatic hydrocarbon with a six‐membered ring. It is one of the most basic structural units for the construction of π conjugated systems, which are widely used as fluorescent dyes and other luminescent materials for imaging applications and displays because of their enhanced spectroscopic signal. Presented herein is 2,5‐bis(methylsulfonyl)‐1,4‐diaminobenzene as a novel architecture for green fluorophores, established based on an effective push–pull system supported by intramolecular hydrogen bonding. This compound demonstrates high fluorescence emission and photostability and is solid‐state emissive, water‐soluble, and solvent‐ and pH‐independent with quantum yields of Φ=0.67 and Stokes shift of 140 nm (in water). This architecture is a significant departure from conventional extended π‐conjugated systems based on a flat and rigid molecular design and provides a minimum requirement for green fluorophores comprising a single benzene ring.     

Water‐Soluble Fluorescent Probes Based on Dendronized Polyfluorenes for Cell Imaging

Novel water‐soluble dendronized fluorescent polyfluorenes (DFPFs) are prepared from hydrophilic monomers and hydrophobic comonomers. Incomplete energy transfer is found to result in a two‐color emission of the DFPFs at around 410 and 650 nm. The incomplete energy transfer can be attributed to the poor compatibility between the fluorene and benzothiadiazole units. Polyethylene oxide (PEO) encapsulation of the DFPFs shows over 90% cell viability, indicating good biocompatibility. These DFPFs show differential cellular uptake. P1 with fewer PEO chains exhibits limited cellular membrane uptake and low brightness in cells. By contrast, P3 with more PEO chains is efficiently internalized by cells and accumulated in the cytoplasm. A strong fluorescence from whole cells is also observed.     

Synthesis of Water‐Soluble Red‐Emitting Thienyl–BODIPYs and Bovine Serum Albumin Labeling

Thesynthesis of three red‐emitting and water‐soluble thienyl‐BODIPYs has beenachieved. The trimethyl(propargyl)ammonium group was chosen as a vector forwater solubility. One or two cationic arms were introduced either on the2‐position of the thienyl unit or on the 4‐position on the boron atom. Thesedyes have pronounced absorption around 600 nm and intense emission at 650 nmwith quantum yield of about 60% in water. Grafting of such BODIPYs via a flexible arm to BSA is veryefficient, allowing attachment of 1 to 30 labels in a controlled manner.  Very strong fluorescence (quantum yield 56%)without aggregation of the dye at a low loading ratio (1:5 BSA/label) in PBSbuffer is measured.     

Novel Water‐Soluble Shape‐Regulatable Luminescent Nanoparticles by Non‐Covalently Bonded Self‐Assembly

Summary: Novel non‐covalently connected water‐soluble nanoparticles that contain poly(fluorene‐co‐phenylene) with hydroxy‐capped alkoxy side chains (PF3BOH) and poly(acrylic acid) (PAA) have been obtained and characterized. With different proportions of PF3BOH and PAA, the shape and size of the nanoparticles can be regulated. The nanoparticles are quite stable in water with no precipitate being observed after weeks. Transmission electron microscopy and dynamic laser light scattering are used to confirm the morphology of the PF3BOH/PAA nanoparticles. Their optical properties have been investigated and show similar optoelectronic properties to a PF3BOH solid film although they do not undergo aggregation.

TEM images of the nanoparticles obtained upon varying the PAA/PF3BOH content.     

Tunable Water‐Soluble Supramolecular Polymers by Visible‐Light‐Regulated Host–Guest Interactions

The development of artificial self‐assembling systems with dynamic photo‐regulation features in aqueous solutions has drawn great attention owing to the potential applications in fabricating elaborate biological materials. Here we demonstrate the fabrication of water‐soluble cucurbit[8]uril (CB[8])‐mediated supramolecular polymers by connecting the fluorinated azobenzene (FAB) containing monomers through host‐enhanced heteroternary π–π stacking interactions. Benefiting from the unique visible‐light‐induced E→Z photoisomerization of the FAB photochromophores, the encapsulation behaviors between the CB[8] macrocycle and the monomers could be regulated upon visible light irradiation, resulting in the depolymerization of such CB[8]‐mediated supramolecular polymers.     

Gold(I)‐Catalyzed Cycloisomerization of 3‐Alkoxyl‐1,6‐diynes: A Facile Access to Bicyclo[2.2.1]hept‐5‐en‐2‐ones

A novel gold‐catalyzed cycloisomerization of 1,6‐diynes was achieved, providing an atom‐economic approach to a diverse set of bicyclo[2.2.1]hept‐5‐en‐2‐ones in moderate to good yields. With unsymmetrical starting materials with two different internal alkynyl substituents, to some extent, the regioselectivity could be controlled by both electronic and steric factors. This unprecedented reactivity pattern may inspire new and unconventional strategies for the preparation of bridged ring systems.     

pH‐Responsive Pillar[6]arene‐based Water‐Soluble Supramolecular Hexagonal Boxes

We describe the preparation of the first water‐soluble pH‐responsive supramolecular hexagonal boxes (SHBs) based on multiple charge‐assisted hydrogen bonds between peramino‐pillar[6]arenes 2 with the molecular “lid” mellitic acid ( 1 a ). The interaction between 2 and 1 a , as well as the other “lids” pyromellitic and trimesic acids ( 1 b and 1 c , respecively) were studied by a combination of experimental and computational methods. Interestingly, the addition of 1 a to the complexes of the protonated form of pillar[6]arene 2 , that is, 3 , with bis‐sulfonate 4 a or 4 b , immediately led to guest escape along with the formation of closed 1 a₂2 supramolecular boxes. Moreover, the process of the openning and closing of the supramolecular boxes along with threading and escaping of the guests, respectively, was found to be reversible and pH‐responsive. This study paves the way for the easy and modular preparation of different SHBs that may have myriad applications.     

Water‐Soluble Pillar[n]arene Mediated Supramolecular Self‐Assembly: Multi‐Dimensional Morphology Controlled by Host Size

We report tunable supramolecular self‐assemblies formed by water‐soluble pillar[n]arenes ( WPn s, n=5–7) and bipyridinium‐azobenzene guests. Nanoscale or microscale morphology of self‐assemblies in water was controlled by the host size of WPn . Supramolecular self‐assemblies could undergo morphology conversion under irradiation with UV light.     

Synthesis of N,N‐Dialkylamino‐nor‐Dihydroxanthene‐Hemicyanine Fused Near‐Infrared Fluorophores and Their First Water‐Soluble and/or Bioconjugatable Analogues

The effective synthesis of extended conjugated N ,N ‐dialkylamino‐nor ‐dihydroxanthene‐based fluorophores is described from diversely functionalized salicylic aldehydes. The access to these original fluorescent derivatives proceeded in two steps through a one‐pot construction of the unusual nor ‐dihydroxanthene (nor ‐DHX) scaffold followed by a diversification step providing a wide variety of nor ‐DHX‐hemicyanine fused dyes emitting in the range of 730–790 nm. The versatility of our approach has enabled a further extension to the late‐stage introduction of negatively/positively charged polar groups onto their terminal nitrogen heterocyclic subunit, thereby giving access to the first water‐soluble and/or bioconjugatable members of this emerging class of NIR fluorophores. Our water‐solubilizing method is easily implementable, and the nor ‐DHX‐hemicyanine skeleton maintains satisfying fluorescence quantum yields (5–20 %) under physiological conditions. Finally, the bioconjugation ability of fluorescent derivatives bearing a free carboxylic acid was demonstrated through the covalent labeling of a model protein, namely, bovine serum albumin.     

Photochemical Strain‐Release‐Driven Cyclobutylation of C(sp3)‐Centered Radicals

A new photoredox‐catalyzed decarboxylative radical addition approach to functionalized cyclobutanes is described. The reaction involves an unprecedented formal Giese‐type addition of C(sp³)‐centered radicals to highly strained bicyclo[1.1.0]butanes. The mild photoredox conditions, which make use of a readily available and bench stable phenyl sulfonyl bicyclo[1.1.0]butane, proved to be amenable to a diverse range of α‐amino and α‐oxy carboxylic acids, providing a concise route to 1,3‐disubstituted cyclobutanes. Furthermore, kinetic studies and DFT calculations unveiled mechanistic details on bicyclo[1.1.0]butane reactivity relative to the corresponding olefin system.