Stepwise Assembly of Turn-on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN⁻-responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN⁻ to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN⁻-detection limit of 0.05 μm , which is much lower than traditional CN⁻ fluorescent sensors (about 0.2 μm ).     

Reaction‐Based Fluorescent Probe for Detection of Endogenous Cyanide in Real Biological Samples

Herein, two compounds ( 1 a and 1 b ) were rationally constructed as novel reaction‐based fluorescent probes for CN^? by making use of the electron‐withdrawing ability of the cyano group that was formed from the sensing reaction. Notably, this design strategy was first employed for the development of fluorescent CN^? probes. The experimental details showed that probe 1 a exhibited a fluorescence turn‐on response to CN^?, whereas other anions, biological thiols, and hydrogen sulfide gave almost no interference. The detection limit of probe 1 a for CN^? was found to be 0.12 μM . The sensing reaction product of 1 a with CN^? was characterized by NMR spectroscopy and mass spectrometry. TD‐DFT calculations demonstrated that the formed cyano group drives the intramolecular charge transfer (ICT) process from coumarin dye to the cyano group and thus the original strong ICT from the coumarin dye to the 3‐position pyridyl vinyl ketone substituent is weakened, which results in recovery of coumarin fluorescence. The practical utility of 1 a was also examined. By fabricating paper strips, probe 1 a can be used as a simple tool to detect CN^? in field measurements. Moreover, probe 1 a has been successfully applied for quantitative detection of endogenous CN^? from cassava root.     

A Post‐Synthetically Modified MOF for Selective and Sensitive Aqueous‐Phase Detection of Highly Toxic Cyanide Ions

Selective and sensitive detection of toxic cyanide (CN^?) by a post‐synthetically altered metal–organic framework (MOF) has been achieved. A post‐synthetic modification was employed in the MOF to incorporate the specific recognition site with the CN^? ion over all other anions, such as Cl^?, Br^?, and SCN^?. The aqueous‐phase sensing and very low detection limit, the essential prerequisites for an effective sensory material, have been fulfilled by the MOF. Moreover, the present detection level meets the standard set by the World Health Organization (WHO) for the permissible limit of cyanide concentration in drinking water. The utilization of MOF‐based materials as the fluorometric probes for selective and sensitive detection of CN^? ions has not been explored till now.     

Switch‐On Fluorescence of a Perylene‐Dye‐Functionalized Metal–Organic Framework through Postsynthetic Modification

A perylene dye was introduced directly as a linker into a metal–organic framework (MOF) during synthesis. Depending on the dye concentration in the MOF synthesis mixture, different fluorescent materials were generated. The successful incorporation of the dye was proven by using ¹³C and ²⁷Al MAS NMR spectroscopy, by solution NMR spectroscopy after digestion of the MOF sample, and by synthesizing a reference dye without connecting groups, which could coordinate on the metal–oxo cluster inside the MOF. Fluorescence quenching effects of the MOF linker, 2‐aminoterephthalate, were observed and overcome by postsynthetic modification with acetic anhydride. We show here for the first time that amino groups, which can be used as anchoring points for covalent attachment of other molecules, are responsible for fluorescence quenching. Thus, a very promising strategy to implement switchable fluorescence into MOFs is shown here.     

Polyethyleneimine Solubilized Luminescent Au(I)‐Thiolate Complexes for Highly Sensitive and Selective Cyanide Anion Sensing

Cyanide (CN^?) is a highly toxic anion to human beings, exploring efficient probes for sensitive and selective detection of it is very important. In this study, we explore a simple one‐pot reaction to synthesize polyethyleneimine (PEI) solubilized Au(I)‐MUA (11‐mercaptoundecanoic acid) complexes under mild condition. The as prepared Au(I)‐MUA complexes exhibit strong red photoluminescence (PL) and can act as sensitive and selective CN^? optical sensor in aqueous media based on the chemical reaction between CN^? and gold atom that quench the fluorescence, and the limit of detection is 10 nM, which is ～270 times lower than the maximum contamination level (2.7 μM) in drinking water permitted by WHO. Additionally, real water sample from a local lake is tested with these optical sensors, and the PL variation caused by 0.1 μ CN^? can be observed.     

Aroyleneimidazophenazine: A Sensitive Probe for Detecting CN− Anion and its Solvatochromism Effect

A novel electron‐deficient heteroacene 15H‐pyrazino[2″,3″:3′,4′]pyrrolo[1′,2′:1,2]imidazo[4,5‐b]phenazin‐15‐one ( 1 ) has been successfully synthesized and characterized. Compound 1 can selectively recognize CN^? and F^? over other 10 anions including BF₄^?, PF₆^?, Cl^?, SO₄^2?, NO₃^?, I^?, H₂PO₄^?, ClO₄^?, Ac^?, and Br^? in CHCl₃/DMF mixed solvents with dual responses, including absorption signals and fluorescent “turn‐off” effects. CN^? and F^? can be distinguished by the completely quenched fluorescence (for CN^?) and partially reduced fluorescence (for F^?). Especially, compound 1 exhibits higher sensitivity to CN^? than F^? with the response concentration as low as 5.0 × 10^?6 mol/L. Moreover, compound 1 shows very interesting solvatochromism effect, and the CHCl₃ solution of compound 1 is sensitive to triethylamine, and its emission could change from green to red upon the addition of triethylamine, which is attributed to the n–π intermolecular charge‐transfer interaction.     

Highly sensitive and selective detect of p‐arsanilic acid with a new water‐stable europium metal–organic framework

The p‐arsanilic acid (p‐ASA), as an aromatic organoarsenic compounds, had received considerable concerns for their potential toxicity and carcinogenic properties. It was essential to detect p‐ASA with a facile method. In this paper, an europium based fluorescent metal–organic framework (MOF) [Eu₂(clhex)·2H₂O)]·H₂O ( BUC‐69 ) was successfully prepared under hydrothermal conditions with 1,2,3,4,5,6‐cyclohexanehexacarboxylic acid (H₆clhex) as organic linker. BUC‐69 displayed superior fluorescence capability to achieve selective and sensitive detection toward p‐ASA in water, which presented the first example of a MOF‐based sensor to detect p‐ASA. BUC‐69 showed excellent chemical stability in solutions under pH ranging from 4 to 12, which makes it be a potential sensor both in acidity and alkalinity condition. Significantly, BUC‐69 performed well in fluorescent sensing of p‐ASA at a low concentration (10^?6 M) in the simulated wastewater prepared with real lake water, and the results were comparable to the values detected by Inductively Coupled Plasma Optical Emission Spectrometer (ICP‐OES). The corresponding mechanism of fluorescent sensing toward p‐ASA with BUC‐69 was proposed and affirmed.     

Unique Fluorogenic Ratiometric Fluorescent Chemodosimeter for Rapid Sensing of CN− in Water

A new benzimidazole‐spiropyran conjugate chemosensor molecule ( BISP ) has been synthesized and characterized by ¹H NMR spectroscopy, mass spectrometry (ESI‐MS), and elemental analysis. The two isomeric forms ( BISP ? BIMC ) were shown to be highly selective and sensitive to CN^? among the ten anions studied in aqueous HEPES buffer, as shown by fluorescence and absorption spectroscopy and even by visual color changes, with a detection limit of 1.7 μM for BIMC . The reaction of CN^? with BIMC was monitored by ¹H NMR spectroscopy, high‐resolution mass spectrometry (HRMS), UV/Vis measurements, and fluorescence spectroscopy in HEPES buffer of pH 7.4. TDDFT calculations were performed in order to correlate the electronic properties of the chemosensor with its cyanide complex. Further, titration against thiophilic metal ions like Au³⁺, Cu²⁺, Ag⁺, and Hg²⁺ with [ BIMC‐CN ] in situ showed that it acts as a secondary recognition ensemble toward Au³⁺ and Cu²⁺ by switch‐on fluorescence. In addition, a reversible logic‐gate property of BIMC has been demonstrated through a feedback loop in the presence of CN^? and Au³⁺ ions, respectively. Furthermore, the use of BIMC to detect CN^? in live cells by fluorescence imaging has also been demonstrated. Notably, test strips based on BIMC were fabricated, which could serve as convenient and efficient CN^? test kits.     

Potassium 4,4′‐Bis(dinitromethyl)‐3,3′‐azofurazanate: A Highly Energetic 3D Metal–Organic Framework as a Promising Primary Explosive

Environmentally acceptable alternatives to toxic lead‐based primary explosives are becoming increasingly important for energetic materials. In this study, potassium 4,4′‐bis(dinitromethyl)‐3,3′‐azofurazanate, comprising two dinitromethyl groups and an azofurazan moiety, was synthesized and isolated as a new energetic 3D metal–organic framework (MOF). Several attractive properties, including a density of 2.039 g cm^?3, a decomposition temperature of 229 °C, a detonation velocity of 8138 m s^?1, a detonation pressure of 30.1 GPa, an impact sensitivity of 2 J, and friction sensitivity of 20 N make 4 a good candidate as a green primary explosive.     

Reaction‐Based Ratiometric Chemosensor for Instant Detection of Cyanide in Water with High Selectivity and Sensitivity

A highly selective chemosensor 1 based on an acylhydrazone group as binding site and naphthalene group as the fluorescence signal group were described, which could instantly detect CN^? in water with specific selectivity and high sensitivity. The detection of cyanide was performed via the nucleophilic attack of cyanide anion on the carbonyl group, which could be confirmed by ¹H NMR, ¹³C NMR, ESI‐MS and DFT calculations. The addition of CN^? to sensor 1 induced a remarkable color change from colorless to yellow and generated a blue fluorescence, these sense procedure could not interfered by other coexistent competitive anions (F^?, Cl^?, Br^?, I^?, AcO^?, H₂PO₄^?, HSO₄^?, ClO₄^?, SCN^?, S^2?, NO₃^? and SO₄^2?). The detection limits were 5.0×10^?7 M and 2.0×10^?9 M of CN^? using the visual fluorescent color changes and fluorescence spectra changes respectively, which is far lower than the WHO guideline of 1.9×10^?6 M . Test strips based on sensor 1 were fabricated, which could act as a convenient and efficient CN^? test kit to detect CN^? in pure water for “in‐the‐field” measurement.     

Versatile Tailoring of Paddle‐Wheel ZnII Metal–Organic Frameworks through Single‐Crystal‐to‐Single‐Crystal Transformations

A new tetracarboxylate ligand having short and long arms formed 2D layer Zn^II coordination polymer 1 with paddle‐wheel secondary building units under solvothermal conditions. The framework undergoes solvent‐specific single crystal‐to‐single crystal (SC‐SC) transmetalation to produce 1_Cu . With a sterically encumbered dipyridyl linker, the same ligand forms non‐interpenetrated, 3D, pillared‐layer Zn^II metal–organic framework (MOF) 2 , which takes part in SC‐SC linker‐exchange reactions to produce three daughter frameworks. The parent MOF 2 shows preferential incorporation of the longest linker in competitive linker‐exchange experiments. All the 3D MOFs undergo complete SC‐SC transmetalation with Cu^II, whereby metal exchange in different solvents and monitoring of X‐ray structures revealed that bulky solvated metal ions lead to ordering of the shortest linker in the framework, which confirms that the solvated metal ions enter through the pores along the linker axis.     

Tetrazine Chromophore‐Based Metal–Organic Frameworks with Unusual Configurations: Synthetic,Structural, Theoretical,Fluorescent, and Nonlinear Optical Studies

Three unusual three‐dimensional (3D) tetrazine chromophore‐based metal–organic frameworks (MOFs) {(Et₄N)[WS₄Cu₃(CN)₂(4,4′‐pytz)_0.5]}_n ( 1 ), {[MoS₄Cu₄(CN)₂(4,4′‐pytz)₂] ? CH₂Cl₂}_n ( 2 ), and {[WS₄Cu₃(4,4′‐pytz)₃] ? [N(CN)₂]}_n ( 3 ; 4,4′‐pytz=3,6‐bis(4‐pyridyl)tetrazine) have been synthesized and characterized by using FTIR and UV/Vis spectroscopy, elemental analysis, powder X‐ray diffraction, gel permeation chromatography, steady‐state fluorescence, and thermogravimetric analysis; their identities were confirmed by single‐crystal X‐ray diffraction studies. MOF 1 possesses the first five‐connected M/S/Cu (M=Mo, W) framework with an unusual 3D (4⁴?6⁶) topology constructed from T‐shaped [WS₄Cu₃]⁺ clusters as nodes and single CN^?/4,4′‐pytz bridges as linkers. MOF 2 features a novel 3D MOF structure with (4²⁰?6⁸) topology, in which the bridging 4,4′‐pytz ligands exhibit unique distorted arch structures. MOF 3 displays the first 3D MOF structure based on flywheel‐shaped [WS₄Cu₃]⁺ clusters with a non‐interpenetrating honeycomb‐like framework and a heavily distorted “ACS” topology. Steady‐state fluorescence studies of 1 – 3 reveal significant fluorescence emissions. The nonlinear optical (NLO) properties of 1 – 3 were investigated by using a Z‐scan technique with 5 ns pulses at λ=532 nm. The Z‐scan experimental results show that the π‐delocalizable tetrazine‐based 4,4′‐pytz ligands contribute to the strong third‐order NLO properties exhibited by 1 – 3 . Time‐dependent density functional theory studies afforded insight into the electronic transitions and spectral characterization of these functionalized NLO molecular materials.     

Monodentate AIEgen Anchored on Metal‐Organic Framework for Fast Fluorescence Sensing of Phosphate

Herein, a novel sensor (TPE‐UiO‐66) was designed via anchoring monodentate tetraphenylethylene (TPE) onto UiO‐66 framework. The combination of the distinct aggregation‐induced emission (AIE) of TPE and the easy replacement of monodentate linker by guest phosphate, makes TPE‐UiO‐66 an ideal platform for sensing HPO₄^2–. Experimental results indicate that TPE‐UiO‐66 can selectively sense HPO₄^2– from other common anions. The limit of detection (LOD) can reach to 5.56 μmol·L^–1 and more importantly, TPE‐UiO‐66 also exhibits an ultra‐fast equilibrium response of 2 min, far faster than those of other sensors especially for UiO‐66‐NH₂. The combination of experimental analysis and density functional theory (DFT) calculations demonstrates that the high selectivity, high sensitivity and fast response of HPO₄^2– detection by TPE‐UiO‐66 can be attributed to the stronger coordination interactions of HPO₄^2– with Zr‐O cluster of UiO‐66 than that of TPE molecule. This study not only provides a potential probe for phosphate, but also represents a novel strategy to design stimuli‐responsive fluorescent MOF‐based sensors via using monodentate AIEgens.     

Pyridinium‐Fused Pyridinone: A Novel “Turn‐on” Fluorescent Chemodosimeter for Cyanide

A new chemodosimeter based on pyridinium‐fused pyridinone iodide ( PI ) has been obtained through a “clean reaction” method. This compound can detect CN^? in aqueous solution with a high selectivity and rapid response. The detection of CN^? occurs through the nucleophilic attack of CN^? on the C?N bond, which induces the destruction of the π‐conjugation on the pyridinium ring. Support of this detection mechanism was obtained by ¹H NMR titration, HR‐MS, and DFT calculations. Upon the addition of 10 equivalents CN^? to a solution of PI in THF/H₂O (1:1, v/v), a 57‐fold enhancement in fluorescence intensity was observed at the maximum emission wavelength of 457 nm. Meanwhile, the maximum absorption wavelength was also blue‐shifted from 447 nm to 355 nm. Other common anions such as BF₄^?, PF₆^?, F^?, Cl^?, Br^?, I^?, H₂PO₄^?, ClO₄^?, CH₃COO^?, NO₂^?, N₃^?, and SCN^? had little effect on the detection of CN^?. The response time of PI for CN^? was less than 5 seconds. The detection limit was calculated to be 5.4×10^?8 M , which is lower than the maximum permission concentration in drinking water (1.9 μM ) set by the World Health Organization (WHO).     

A Water‐Stable Terbium(III)–Organic Framework as a Chemosensor for Inorganic Ions,Nitro‐Containing Compounds and Antibiotics in Aqueous Solutions

Effective detection of organic/inorganic pollutants, such as antibiotics, nitro‐compounds, excessive Fe³⁺ and MnO₄^?, is crucial for human health and environmental protection. Here, a new terbium(III)–organic framework, namely [Tb(TATAB)(H₂O)]?2H₂O ( Tb‐MOF , H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐m‐aminobenzoic acid), was assembled and characterized. The Tb‐MOF exhibits a water‐stable 3D bnn framework. Due to the existence of competitive absorption, Tb‐MOF has a high selectivity for detecting Fe³⁺, MnO₄^?, 4‐nirophenol and nitroimidazole (ronidazole, metronidazole, dimetridazole, ornidazole) in aqueous through luminescent quenching. The results suggest that Tb‐MOF is a simple and reliable reagent with multiple sensor responses in practical applications. To the best of our knowledge, this work represents the first Tb^III‐based MOF as an efficient fluorescent sensor for detecting metal ions, inorganic anions, nitro‐compounds, and antibiotics simultaneously.     

Functionalized Cu‐MOF@CNT Hybrid: Synthesis,Crystal Structure and Applicability in Supercapacitors

The synthesis of a metal–organic framework (MOF) named IITI‐1 is reported by employing an H₂L linker with Cu(NO₃)₂?3 H₂O in a mixed solvent system of N,N‐dimethyl formamide (DMF) and H₂O. Further, in order to explore the energy storage application of IITI‐1 , a IITI‐1/CNT hybrid was prepared by a simple ultrasonication technique. Incorporation of a carbon nanotube (CNT) in the layered IITI‐1 MOF gave rise to enhanced electrolyte accessibility along with improved electrochemical storage capacity. The electrochemical investigations reveal a high specific capacitance (380 F g^?1 at 1.6 A g^?1) with a good rate performance for IITI‐1/CNT . The IITI‐1 MOF and the IITI‐1/CNT composite were characterized by PXRD, BET, SEM, and TEM techniques. Moreover, IITI‐1 MOF was also confirmed by single‐crystal XRD analysis.     

Thermoplastic Membranes Incorporating Semiconductive Metal–Organic Frameworks: An Advance on Flexible X‐ray Detectors

Semiconductive metal–organic frameworks (MOFs) have emerged in applications such as chemical sensors, electrocatalysts, energy storage materials, and electronic devices. However, examples of semiconductive MOFs within flexible electronics have not been reported. We present flexible X‐ray detectors prepared by thermoplastic dispersal of a semiconductive MOF ( SCU‐13 ) through a commercially available polymer, poly(vinylidene fluoride). The flexible detectors exhibit efficient X‐ray‐to‐electric current conversion with enhanced charge‐carrier mobility and low trap density compared to pelleted devices. A high X‐ray detection sensitivity of 65.86 μCGy_air^?1 cm^?2 was achieved, which outperforms other pelleted devices and commercial flexible X‐ray detectors. We demonstrate that the MOF‐based flexible detectors can be operated at multiple bending angles without a deterioration in detection performance. As a proof‐of‐concept, an X‐ray phase contrast under bending conditions was constructed using a 5×5 pixelated MOF‐based imager.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.