Anchored Mediator Enabling Shuttle-Free Redox Mediation in Lithium-Oxygen Batteries

Redox mediators (RMs) are considered an effective countermeasure to reduce the large polarization in lithium-oxygen batteries. Nevertheless, achieving sufficient enhancement of the cyclability is limited by the trade-offs of freely mobile RMs, which are beneficial for charge transport but also trigger the shuttling phenomenon. Here, we successfully decoupled the charge-carrying redox property of RMs and shuttling phenomenon by anchoring the RMs in polymer form, where physical RM migration was replaced by charge transfer along polymer chains. Using PTMA (poly(2,2,6,6-tetramethyl-1-piperidinyloxy-4-yl methacrylate)) as a polymer model system based on the well-known RM tetramethylpiperidinyloxyl (TEMPO), it is demonstrated that PTMA can function as stationary RM, preserving the redox activity of TEMPO. The efficiency of RM-mediated Li₂O₂ decomposition remains remarkably stable without the consumption of oxidized RMs or degradation of the lithium anode, resulting in an improved performance of the lithium-oxygen cell.     

Redox‐Polymer‐Based High‐Current‐Density Gas‐Diffusion H2‐Oxidation Bioanode Using [FeFe] Hydrogenase from Desulfovibrio desulfuricans in a Membrane‐free Biofuel Cell

The incorporation of highly active but also highly sensitive catalysts (e.g. the [FeFe] hydrogenase from Desulfovibrio desulfuricans) in biofuel cells is still one of the major challenges in sustainable energy conversion. We report the fabrication of a dual‐gas diffusion electrode H₂/O₂ biofuel cell equipped with a [FeFe] hydrogenase/redox polymer‐based high‐current‐density H₂‐oxidation bioanode. The bioanodes show benchmark current densities of around 14 mA cm^?2 and the corresponding fuel cell tests exhibit a benchmark for a hydrogenase/redox polymer‐based biofuel cell with outstanding power densities of 5.4 mW cm^?2 at 0.7 V cell voltage. Furthermore, the highly sensitive [FeFe] hydrogenase is protected against oxygen damage by the redox polymer and can function under 5 % O₂.     

A π‐Conjugation Extended Viologen as a Two‐Electron Storage Anolyte for Total Organic Aqueous Redox Flow Batteries

Extending the conjugation of viologen by a planar thiazolo[5,4‐d]thiazole (TTz) framework and functionalizing the pyridinium with hydrophilic ammonium groups yielded a highly water‐soluble π‐conjugation extended viologen, 4,4′‐(thiazolo[5,4‐d]thiazole‐2,5‐diyl)bis(1‐(3‐(trimethylammonio)propyl)pyridin‐1‐ium) tetrachloride, [(NPr)₂TTz]Cl₄ , as a novel two‐electron storage anolyte for aqueous organic redox flow battery (AORFB) applications. Its physical and electrochemical properties were systematically investigated. Paired with 4‐trimethylammonium‐TEMPO (N^Me‐TEMPO) as catholyte, [(NPr)₂TTz]Cl₄ enables a 1.44 V AORFB with a theoretical energy density of 53.7 Wh L^?1. A demonstrated [(NPr)₂TTz]Cl₄ /N^Me‐TEMPO AORFB delivered an energy efficiency of 70 % and 99.97 % capacity retention per cycle.     

A redox‐active polythiophene‐modified separator for safety control of lithium‐ion batteries

A potential‐sensitive separator is prepared simply by incorporating a redox‐active poly(3‐butylthiophene) (P3BT) into the micropores of a commercial porous polyolefin film and tested for overcharge protection of LiFePO₄/Li₄Ti₅O₁₂ lithium‐ion batteries. The experimental results demonstrate that owing to the reversible p‐doping and dedoping of the redox‐active P3BT polymer embedded in the separator with the changes of the cathode potential from an overcharge state to a normal operating state, this type of separator can reversibly switch between electronically insulating state and conductive state to maintain the charge voltage of LiFePO₄/Li₄Ti₅O₁₂ cells at a safety value of ≤2.4 V, and thus protecting the cell from voltage runaway. As this type of the separators works reversibly and has no negative impact on the battery performances, it can be used as an internal and self‐protecting mechanism for commercial lithium‐ion batteries and other rechargeable batteries. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1487–1493     

Spatial and Kinetic Regulation of Sulfur Electrochemistry on Semi‐Immobilized Redox Mediators in Working Batteries

Use of redox mediators (RMs) is an effective strategy to enhance reaction kinetics of multi‐electron sulfur electrochemistry. However, the soluble small‐molecule RMs usually aggravate the internal shuttle and thus further reduce the battery efficiency and cyclability. A semi‐immobilization strategy is now proposed for RM design to effectively regulate the sulfur electrochemistry while circumvent the inherent shuttle issue in a working battery. Small imide molecules as the model RMs were co‐polymerized with moderate‐chained polyether, rendering a semi‐immobilized RM (PIPE) that is spatially restrained yet kinetically active. A small amount of PIPE (5 % in cathode) extended the cyclability of sulfur cathode from 37 to 190 cycles with 80 % capacity retention at 0.5 C. The semi‐immobilization strategy helps to understand RM‐assisted sulfur electrochemistry in alkali metal batteries and enlightens the chemical design of active additives for advanced electrochemical energy storage devices.     

Visible‐Light‐Induced Photoredox Catalysis of Dye‐Sensitized Titanium Dioxide: Selective Aerobic Oxidation of Organic Sulfides

TiO₂ photoredox catalysis has recently attracted much interest for use in performing challenging organic transformations under mild reaction conditions. However, the reaction scheme is hampered by the fact that TiO₂ can only be excited by UV light of wavelengths λ shorter than 385 nm. One promising strategy to overcome this issue is to anchor an organic, preferably metal‐free dye onto the surface of TiO₂. Importantly, we observed that the introduction of a catalytic amount of the redox mediator TEMPO [(2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl] ensured the stability of the anchored dye, alizarin red S, thereby resulting in the selective oxidation of organic sulfides with O₂. This result affirms the essential role of the redox mediator in enabling the organic transformations by visible‐light photoredox catalysis.     

Redox‐Active‐Ligand‐Mediated Formation of an Acyclic Trinuclear Ruthenium Complex with Bridging Nitrido Ligands

Coordination of a redox‐active pyridine aminophenol ligand to Ru^II followed by aerobic oxidation generates two diamagnetic Ru^III species [ 1 a (cis) and 1 b (trans)] with ligand‐centered radicals. The reaction of 1 a / 1 b with excess NaN₃ under inert atmosphere resulted in the formation of a rare bis(nitrido)‐bridged trinuclear ruthenium complex with two nonlinear asymmetrical Ru‐N‐Ru fragments. The spontaneous reduction of the ligand centered radical in the parent 1 a / 1 b supports the oxidation of a nitride (N^3?) to half an equivalent of N₂. The trinuclear omplex is reactive toward TEMPO‐H, tin hydrides, thiols, and dihydrogen.     

Cationic Reverse Micelles Create Water with Super Hydrogen‐Bond‐Donor Capacity for Enzymatic Catalysis: Hydrolysis of 2‐Naphthyl Acetate by α‐Chymotrypsin

Reverse micelles (RMs) are very good nanoreactors because they can create a unique microenvironment for carrying out a variety of chemical and biochemical reactions. The aim of the present work is to determine the influence of different RM interfaces on the hydrolysis of 2‐naphthyl acetate (2‐NA) by α‐chymotrypsin (α‐CT). The reaction was studied in water/benzyl‐n‐hexadecyldimethylammonium chloride (BHDC)/benzene RMs and, its efficiency compared with that observed in pure water and in sodium 1,4‐bis‐2‐ethylhexylsulfosuccinate (AOT) RMs. Thus, the hydrolysis rates of 2‐NA catalyzed by α‐CT were determined by spectroscopic measurements. In addition, the method used allows the joint evaluation of the substrate partition constant K_p between the organic and the micellar pseudophase and the kinetic parameters: catalytic rate constant k_cat, and the Michaelis constant K_M of the enzymatic reaction. The effect of the surfactant concentration on the kinetics parameters was determined at constant W₀=[H₂O]/[surfactant], and the variation of W₀ with surfactant constant concentration was investigated. The results show that the classical Michaelis–Menten mechanism is valid for α‐CT in all of the RMs systems studied and that the reaction takes place at both RM interfaces. Moreover, the catalytic efficiency values k_cat/K_M obtained in the RMs systems are higher than that reported in water. Furthermore, there is a remarkable increase in α‐CT efficiency in the cationic RMs in comparison with the anionic system, presumably due to the unique water properties found in these confined media. The results show that in cationic RMs the hydrogen‐bond donor capacity of water is enhanced due to its interaction with the cationic interface. Hence, entrapped water can be converted into “super‐water” for the enzymatic reaction studied in this work.     

Electron Transfer between Genetically Modified Hansenula polymorpha Yeast Cells and Electrode Surfaces via Os‐complex modified Redox Polymers

Graphite electrodes modified with redox‐polymer‐entrapped yeast cells were investigated with respect to possible electron‐transfer pathways between cytosolic redox enzymes and the electrode surface. Either wild‐type or genetically modified Hansenula polymorpha yeast cells over‐expressing flavocytochrome b2 (FC b₂) were integrated into Os‐complex modified electrodeposition polymers. Upon increasing the L ‐lactate concentration, an increase in the current was only detected in the case of the genetically modified cells. The overexpression of FC b₂ and the related amplification of the FC b₂/L ‐lactate reaction cycle was found to be necessary to provide sufficient charge to the electron‐exchange network in order to facilitate sufficient electrochemical coupling between the cells, via the redox polymer, to the electrode. The close contact of the Os‐complex modified polymer to the cell wall appeared to be a prerequisite for electrically wiring the cytosolic FC b₂/L ‐lactate redox activity and suggests the critical involvement of a plasma membrane redox system. Insights in the functioning of whole‐cell‐based bioelectrochemical systems have to be considered for the successful design of whole‐cell biosensors or microbial biofuel cells.     

Enhancing Capacity Performance by Utilizing the Redox Chemistry of the Electrolyte in a Dual‐Electrolyte Sodium‐Ion Battery

A strategy is described to increase charge storage in a dual electrolyte Na‐ion battery (DESIB) by combining the redox chemistry of the electrolyte with a Na⁺ ion de‐insertion/insertion cathode. Conventional electrolytes do not contribute to charge storage in battery systems, but redox‐active electrolytes augment this property via charge transfer reactions at the electrode–electrolyte interface. The capacity of the cathode combined with that provided by the electrolyte redox reaction thus increases overall charge storage. An aqueous sodium hexacyanoferrate (Na₄Fe(CN)₆) solution is employed as the redox‐active electrolyte (Na‐FC) and sodium nickel Prussian blue (Na_x‐NiBP) as the Na⁺ ion insertion/de‐insertion cathode. The capacity of DESIB with Na‐FC electrolyte is twice that of a battery using a conventional (Na₂SO₄) electrolyte. The use of redox‐active electrolytes in batteries of any kind is an efficient and scalable approach to develop advanced high‐energy‐density storage systems.     

Helical polyacetylenes carrying 2,2,6,6‐tetramethyl‐1‐piperidinyloxy and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy moieties: Their synthesis,properties, and function

2,2,6,6‐Tetramethyl‐1‐piperidinyloxy (TEMPO)‐ and 2,2,5,5‐tetramethyl‐1‐pyrrolidinyloxy (PROXYL)‐containing (R)‐1‐methylpropargyl TEMPO‐4‐carboxylate ( 1 ), (R)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 2 ), (rac)‐1‐methylpropargyl PROXYL‐3‐carboxylate ( 3 ), (S)‐1‐propargylcarbamoylethyl TEMPO‐4‐carboxylate ( 4 ), and (S)‐1‐propargyloxycarbonylethyl TEMPO‐4‐carboxylate ( 5 ) (TEMPO, PROXYL) were polymerized to afford novel polymers containing the TEMPO and PROXYL radicals at high densities. Monomers 1–3 and 5 provided polymers with moderate number‐average molecular weights of 8200–140,900 in 49–97% yields in the presence of (nbd)Rh⁺[η⁶‐C₆H₅B^?(C₆H₅)₃], whereas 4 gave no polymer with this catalyst but gave polymers possessing low M_n (3800–7500) in 56–61% yield with [(nbd)RhCl]₂‐Et₃N. Poly( 1 ), poly( 2 ), and poly( 4 ) took a helical structure with predominantly one‐handed screw sense in THF and CHCl₃ as well as in film state. The helical structure of poly( 1 ) and poly( 2 ) was stable upon heating and addition of MeOH, whereas poly( 4 ) was responsive to heat and solvents. All of the free radical‐containing polymers displayed the reversible charge/discharge processes, whose capacities were in a range of 43.2–112 A h/kg. In particular, the capacities of poly( 2 )–poly( 5 )‐based cells reached about 90–100% of the theoretical values regardless of the secondary structure of the polymer, helix and random. Poly( 1 ), poly( 2 ), and poly( 4 ) taking a helical structure exhibited better capacity tolerance towards the increase of current density than nonhelical poly( 3 ) and poly( 5 ) did. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5431–5445, 2007     

Oxidation polymerization of a charge‐transfer complex of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene with 7,7,8,8‐tetracyanoquinodimethane

A π‐conjugated poly(α‐dithienylen‐dithiafulvene) ( 2 ) was obtained by the oxidation polymerization of 2,6‐bis(2‐thienyl)‐1,4‐dithiafulvene ( 1 ) as a dithiafulvene monomer derived from 4‐(2‐thienyl)‐1,2,3‐thiadiazole. When a solution of 1 in CHCl₃ was added to a stirred solution of FeCl₃ in CHCl₃, only the low‐molecular‐weight product 2 was obtained. The mixture was stirred for 15 h with an N₂ flow. The polymerization at higher temperatures resulted in polymers with large insoluble fractions. A higher molecular weight polymer was obtained by the oxidation polymerization of a charge‐transfer complex of 1 with 7,7,8,8‐tetracyanoquinodimethane (compound 3 ). In contrast to 2 , polymer 4 was readily soluble in dimethyl sulfoxide, dimethylformamide, and acetone and partially soluble in tetrahydrofuran and methanol and had a larger molecular weight (peak top molecular weight = 37,000). The conductivity of polymer 4 was 3 orders of magnitude larger than that of polymer 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6592–6598, 2005     

Impedance Analysis of Inherently Redox‐Active Ionic‐Liquid‐Based Photoelectrochemical Cells: Charge‐Transfer Mechanism in the Presence of an Additional Redox Couple

An intensive electrochemical impedance study was carried out to understand the charge‐transfer processes in photoelectrochemical (PEC) cells based on ionic liquid (IL) electrolytes. Three different electrolytes were utilized to understand the role of redox species as well as the medium on the charge‐transfer mechanism. The negligible diffusion resistance, despite the presence of two different redox species in the case of Fe(CN)₆^?4/?3 in IL, was explained on the basis of charge transfer between species of two different redox couples. Accordingly, the redox species are not required to travel through the bulk of the electrolyte for the removal of accumulated charges, as short‐range charge transfer between the IL and the Fe(CN)₆^?4/?3 species facilitates the removal of accumulated charges. It is also shown that PEC cells utilizing dual redox couples are highly stable with larger photoelectrochmeical windows, >3 V.     

Approaches for synthesis of soluble poly(3,6‐dihydroxy‐2,7‐carbazole) with phenolic function

Poly(N‐alkyl‐3,6‐dihydroxy‐2,7‐carbazole) which should be soluble and have phenolic function was synthesized through different two routes. The former method was a direct synthesis by polymerizing a 2,7‐dibromo‐3,6‐dihydroxycarbazole monomer using Ni(cod)₂, which only gave a low molecular weight polymer. The latter method was an ether cleavage reaction of methoxy groups in a precursor polymer, poly(3,6‐dimethoxycarbazole), using BBr₃, which gave successfully the objective polymer that has a number average molecular weight of 4300 g/mol comparable to the precursor polymer. They showed large spectral changes in photoabsorption and fluorescence on addition of base. They also showed redox behavior similar to a hydroquinone/benzoquinone couple investigated by cyclic voltammetry. These new functions could be derived from the phenolic hydroxy group in the carbazole unit. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2039–2044     

Assorted Phenoxyl‐Radical Polymers and Their Application in Lithium‐Organic Batteries

The synthesis and electrochemical characterization of novel polymers bearing phenoxyl‐radicals as redox‐active side chains is described. The monomers are synthesized from the corresponding phenols and quinones, respectively. These compounds are subsequently poly­merized via ring‐opening metathesis polymerization. The electrochemical properties of the phenoxyl‐radical polymers are characterized using cyclic voltammetry and the most promising polymer is investigated as active material in a lithium coin‐cell, creating the first phenoxyl‐lithium battery. These phenoxyl‐containing polymers represent interesting anode materials for organic radical and lithium batteries due to their suitable redox‐potentials and possibility to create batteries with higher potentials as well as straightforward synthesis procedures.

     

A Nernstian Biosupercapacitor

We propose the very first “Nernstian biosupercapacitor”, a biodevice based on only one redox polymer: poly(vinyl imidazole‐co‐allylamine)[Os(bpy)₂Cl], and two biocatalysts. At the bioanode PQQ‐dependent glucose dehydrogenase reduces the Os³⁺ moieties at the polymer to Os²⁺ shifting the Nernst potential of the Os³⁺/Os²⁺ redox couple to negative values. Concomitantly, at the biocathode the reduction of O₂ by means of bilirubin oxidase embedded in the same redox polymer leads to the oxidation of Os²⁺ to Os³⁺ shifting the Nernst potential to higher values. Despite the use of just one redox polymer an open circuit voltage of more than 0.45 V was obtained during charging and the charge is stored in the redox polymer at both the bioanode and the biocathode. By connecting both electrodes via a predefined resistor a high power density is obtained for a short time exceeding the steady state power of a corresponding biofuel cell by a factor of 8.     

Selective Alcohol Oxidation by a Copper TEMPO Catalyst: Mechanistic Insights by Simultaneously Coupled Operando EPR/UV‐Vis/ATR‐IR Spectroscopy

The first coupled operando EPR/UV‐Vis/ATR‐IR spectroscopy setup for mechanistic studies of gas‐liquid phase reactions is presented and exemplarily applied to the well‐known copper/TEMPO‐catalyzed (TEMPO=(2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl) oxidation of benzyl alcohol. In contrast to previous proposals, no direct redox reaction between TEMPO and Cu^I/Cu^II has been detected. Instead, the role of TEMPO is postulated to be the stabilization of a (bpy)(NMI)Cu^II‐O₂^??‐TEMPO (bpy=2,2′‐bipyridine, NMI=N‐methylimidazole) intermediate formed by electron transfer from Cu^I to molecular O₂.     

Metal‐Free Radical 5‐exo‐dig Cyclizations of Phenol‐Linked 1,6‐Enynes for the Synthesis of Carbonylated Benzofurans

A new metal‐free radical 5‐exo‐dig cyclization of phenol‐linked 1,6‐enynes with O₂, 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), and tBuONO is described. With this general method, carbonylated benzofurans can be accessed through incorporation of two oxygen atoms into the product from O₂ and TEMPO through dioxygen activation and oxidative cleavage of the N? O bond, respectively.     

Poly[N‐(10‐oxo‐2‐vinylanthracen‐9(10H)‐ylidene)cyanamide] as a novel cathode material for li‐organic batteries

Redox‐active polymers draw significant attention as active material in secondary batteries during the last decade. A new anthraquinone‐based redox‐active monomer was designed, which electrochemical behavior was tailored by mono‐modification of one keto group. The monomer exhibits two one‐electron redox reactions and has a low molar mass, resulting in a high theoretical capacity of 207 mAh/g. The polymerization of the monomer was optimized by variation of solvent and initiator. Moreover, the electrochemical behavior was studied using cyclic voltammetry and the polymer was used as active material in a composite electrode in lithium organic batteries. The polymer reveals a cell potential of 2.3 V and a promising capacity of 137 mAh/g. During the first 100 cycles, the capacity drops to 85% of the initial value. The influence of the charging speed on the charging/discharging properties of the batteries was further investigated. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2517–2523     

Liquid‐Free Lithium–Oxygen Batteries

Non‐aqueous lithium–oxygen batteries are considered as most advanced power sources, albeit they are facing numerous challenges concerning almost each cell component. Herein, we diverge from the conventional and traditional liquid‐based non‐aqueous Li–O₂ batteries to a Li–O₂ system based on a solid polymer electrolyte (SPE‐) and operated at a temperature higher than the melting point of the polymer electrolyte, where useful and most applicable conductivity values are easily achieved. The proposed SPE‐based Li‐O₂ cell is compared to Li–O₂ cells based on ethylene glycol dimethyl ether (glyme) through potentiodynamic and galvanostatic studies, showing a higher cell discharge voltage by 80 mV and most significantly, a charge voltage lower by 400 mV. The solid‐state battery demonstrated a comparable discharge‐specific capacity to glyme‐based Li–O₂ cells when discharged at the same current density. The results shown here demonstrate that the safer PEO‐based Li–O₂ battery is highly advantageous and can potentially replace the contingent of liquid‐based cells upon further investigation.