Solid-phase extraction of vanadium(V) from tea infusions and wines on immobilized nanometer titanium dioxide followed by ICP-OES analysis

Nanosized titanium dioxide immobilized on silica gel was synthesized and used as fixed-bed phase for V(V) pre-concentration, followed by inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. Three different sorbents were prepared by sol–gel method starting from a mixture of titanium isopropoxide, 2-propanol and water, and characterized by X-ray powder diffraction (XRPD), scanning electron microscopy (SEM) and BET analysis. V(V), the most stable and toxic oxidation state of the element, present in water and beverages samples, was selectively sorbed, pre-concentrated, quantitatively eluted by 0.1 M HCl and analyzed by ICP-OES. The effectiveness of the procedure was first assessed on tap water enriched with 1 μg L^?1 of V(V) obtaining recoveries up to 92% (n = 4). The pre-concentration step was then optimized for complex matrices such as tea infusions and red and white wines. The reliability of the procedure was assessed on the same beverages samples spiked with 20–250 μg L^?1. Quantitative recoveries (82–95%, n = 4) were assured avoiding any sample pre-treatment, generally essential in such complex matrices, obtaining good precision (RSD < 12%, n = 3). The method was then applied to the determination of V(V) in commercial tea infusions and wines.     

Chemically modified multiwalled carbon nanotubes as efficient and selective sorbent for separation and preconcentration of trace amount of Co(II), Cd(II), Pb(II), and Pd(II)

Multi-walled carbon nanotubes (MWCNTs) were chemically functionalized by glutaric dihydrazide (GDH) and characterized with FT-IR technique. This new sorbent was used for enrichment and preconcentration of Co(II), Cd(II), Pb(II), and Pd(II) ions. The adsorption was achieved quantitatively on MWCNTs at pH 4.0, and then the retained metal ions on the adsorbent were eluted with 1.5 mol L^?1 HNO₃. The effects of analytical parameters including pH of the solution, eluent type, sample volume, and matrix ions were investigated for optimization of the presented procedure. The adsorption capacity of the adsorbent at optimum conditions was found to be 33.6, 29.2, 22.1, and 36.0 mg g^?1 for Co(II), Cd(II), Pb(II), and Pd(II), respectively. The LOD values of the method were 0.16, 0.19, 0.17, and 0.12 ng mL^?1 (3Sb, n = 10) for Co(II), Cd(II), Pb(II), and Pd(II), respectively. The RSDs values of the method were 0.75, 0.85, 1.16, and 1.30 ng mL^?1 for Co(II), Cd(II), Pb(II), and Pd(II), respectively. The method was applied for the determination of analytes in soil, well water, and wastewater samples with satisfactory results.     

A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Synthesis,spectral, crystal structural,antimicrobial, DNA interaction and thermal behavior of some new zinc halide complexes: 3D supramolecular structure of zinc bromide complex

Three new four coordinated zinc(II) complexes have been synthesized and characterized by IR, UV, elemental analysis, ¹H and ¹³C NMR and X-ray single crystal analysis. The elemental analyses of the complexes are in agreement with the general formula of ZnLX₂ wherein L = Schiff base ligand and X = Cl^?, Br^? and I^?. Low molar conductivities in DMF indicated non-electrolyte character of all complexes. Spectroscopic studies well confirmed the coordination via azomethine nitrogens of the ligand to zinc ion. The single crystal X-ray analysis shows that ZnLBr₂ crystallizes in the triclinic crystal system with space group $\mathit{P}\overline{1}$. It contains two crystallographically independent molecules noted as A and B, with both Zn1A and Zn1B being almost in perfect tetrahedral environments (τ₄ = 0.94 for Zn1A and τ₄ = 0.93 for Zn1B). A detailed structural analysis shows that there are three non-classical hydrogen bondings of C–H…Br in the structure. Various C–H…π and C–H…Br interactions play an important role in stabilizing the molecular structure and then give rise to a 3D supramolecular structure of the ZnLBr₂ complex. After characterization, the Schiff base and its complexes were screened in vitro for their antibacterial and antifungal activities by disk diffusion technique. Also the ability of the complexes for DNA cleavage was studied by agarose gel electrophoresis method. Finally, thermal behavior of the complexes has been studied by thermo-gravimetry and then some activation kinetics parameters of decomposition steps were evaluated based on TG/DTG plots.     

Investigation of electrocoagulation reactor design parameters effect on the removal of cadmium from synthetic and phosphate industrial wastewater

This study investigates the effect of reactor design parameters on cadmium removal from industrial wastewater discharged by the Tunisian Chemical Group (TCG) to improve as much as possible efficiency and cost of electrocoagulation (EC) process. Based on an examination of the design parameters one by one, the best cadmium removal was achieved for an inter-electrode distance (d_ie) of 0.5 cm, monopolar connection mode, stirring speed of 300 rev min^?1, surface-area-to-volume ratio (S/V) of 13.6 m^?1, and an initial temperature of 50 °C. These operating conditions are allowed to achieve efficient removal in a relatively short operating time with the lowest energy consumption and cost possible. The present study proved that the parameters that have an effect on the operating cost are the electrode configuration, inter-electrode distance and S/V ratio. The energy consumption, the pH evolution, and the treatment cost were studied. The investigation of the effect of all the selected optimum EC design parameters together on the removal of cadmium from the TCG wastewater proved that the treatment was highly efficient; 100% of cadmium removal was reached in 5 min, with a very low power consumption (1.6 kW h m^?3) and very low cost (0.116 TND m^?3). Moreover, EC was found to be capable of removing cadmium as well as other pollutants at the same time from the case-study industrial wastewater. The investigation carried out in this work explores and proposes a very cost-effective treatment method to remove heavy metals from industrial wastewater if compared to results reported about cost of this treatment process through other widely used technologies such as coagulation (4.36 Tunisian National Dinar (TND) m^?3) and precipitation (9.96 TND m^?3) employed in previous studies.     

Application of carbon nanotubes in extraction and chromatographic analysis: A review

Carbon nanotube (CNT), a well-known carbon-based nanomaterial has drawn much attention in many application fields including chemistry in the last few decades. Many researchers and scientists have shown huge interest to improve the extraction methodologies and adopt their applications in combination with chromatography technique. With respect to this, the exceptional applications of CNTs have been introduced as extraction sorbent due to their excellent inborn physical and chemical properties. In particular, CNTs have consistently been used as adsorbents in various techniques including solid-phase micro-extraction, solid-phase extraction, micro dispersive slid phase extraction, magnetic dispersive solid phase extraction, analytes enrichment, sample fractionation and clean-up as well as support for many derivatization reactions. Many research papers have discussed the successful use of CNTs to overcome the limitations of the extraction techniques due to their excellent sorbent capacity. In addition, considering the clear need to make chromatographic technique more successful, the applications of CNTs have been reported in the literatures in details as stationary and pseudo-stationary phases for the separation and extraction of challenging compounds. Because of the higher thermal and chemical stability, CNTs have been anticipated as stationary phase modifier for chromatographic applications to avoid bleeding of the columns and enable the analysis even at very high temperature (1200 °C). In liquid chromatography CNTs have primarily been used in combination with other packing materials (silica) and sometimes incorporated in a porous polymeric monolith. Therefore, the recent utilizations of CNTs as extraction materials and stationary phases have been illustrated in the current review and a table listing the details applications of CNTs in aforementioned field is provided as well. We believe that the review will help researcher to gain vast knowledge about application of carbon nanotubes in the field of separation chemistry.