Atomistic Simulations of COSAN: Amphiphiles without a Head-and-Tail Design Display “Head and Tail” Surfactant Behavior

Cobaltabisdicarbollide (COSAN) anions have an unexpectedly rich self-assembly behavior, which can lead to vesicles and micelles without having a classical surfactant molecular architecture. This was rationalized by the introduction of new terminology and novel driving forces. A key aspect in the interpretation of COSAN behavior is the assumption that the most stable form of these ions is the transoid rotamer, which lacks a “hydrophilic head” and a “hydrophobic tail”. Using implicit solvent DFT calculations and MD simulations we show that in water, 1) the cisoid rotamer is the most stable form of COSAN and 2) this cisoid rotamer has a well-defined hydrophilic polar region (“head”) and a hydrophobic apolar region (“tail”). In addition, our simulations show that the properties of this rotamer in water (interfacial affinity, micellization) match those expected for a classical surfactant. Therefore, we conclude that the experimental results for the COSAN ions can now be understood in terms of its amphiphilic molecular architecture.     

Reversible pH‐ and Photocontrollable Carbohydrate‐Based Surfactants

The parallel synthesis and properties of a library of photoswitchable surfactants comprising a hydrophobic butylazobenzene tail‐group and a hydrophilic carbohydrate head‐group, including the first surfactants to exhibit dual photo‐ and pH‐responsive behavior, is reported. This new generation of surfactants shows varying micelle morphologies, photocontrollable surface tension, and pH‐induced aggregation and adsorption.     

Efficient “On‐the‐Fly” calculation of Raman Spectra from Ab‐Initio molecular dynamics: Application to hydrophobic/hydrophilic solutes in bulk water

We present a novel computational method to accurately calculate Raman spectra from first principles. Together with an extension of the second‐generation Car‐Parrinello method of Kühne et al. (Phys. Rev. Lett. 2007, 98, 066401) to propagate maximally localized Wannier functions together with the nuclei, a speed‐up of one order of magnitude can be observed. This scheme thus allows to routinely calculate finite‐temperature Raman spectra “on‐the‐fly” by means of ab‐initio molecular dynamics simulations. To demonstrate the predictive power of this approach we investigate the effect of hydrophobic and hydrophilic solutes in water solution on the infrared and Raman spectra. © 2015 Wiley Periodicals, Inc.     

Self-assembly in aqueous bile salt solutions

The salts of bile acids (“bile salts”) self-assemble in aqueous solution, similar to classical amphiphiles. The micellization is not only driven by the hydrophobic effect, but also hydrogen binding. Moreover, instead of a small, hydrophilic head and a flexible, hydrophobic tail, bile salts are rigid, almost flat molecules with weakly separated hydrophobic and hydrophilic faces. This results in a complex self-assembly behaviour with very distinct aggregate properties. Some characteristics resemble the behaviour of classical amphiphiles, while others are very different and reminiscent of other classes of molecules, for example low-molecular weight gelators or chromonic materials. We review the peculiar properties of bile salt aggregates, concentrating on general trends rather than specific values and comparing them to classical amphiphiles.     

Optimal Configurations of “Capped” β‐Cyclodextrin Dimers in Water Maximise Hydrophobic Association

Circular dichroism analysis and proton NMR experiments revealed that solutions of 3‐O‐(2‐methylnaphthyl)‐β‐cyclodextrin form different dimer configurations. The exact nature of the dimer configurations were postulated to be of three types in which these capped cyclodextrins (CDs) are orientated in head‐to‐head and head‐to‐tail arrangements. Here we show from detailed computer simulations and free‐energy calculations on the configurations that the head‐to‐head configuration in which the naphthyl groups are mutually inserted into each other’s CD cavities is the most favoured configuration. This configuration optimises the hydrophobic association of the naphthyl aromatic groups and the ring cavities as well as forming the most inter‐CD hydrogen bonds of the three configurations.     

“Head‐to‐Middle” and “Head‐to‐Tail” cis‐Prenyl Transferases: Structure of Isosesquilavandulyl Diphosphate Synthase

We report the first X‐ray crystallographic structure of the “head‐to‐middle” prenyltransferase, isosesquilavandulyl diphosphate synthase, involved in biosynthesis of the merochlorin class of antibiotics. The protein adopts the ζ or cis‐prenyl transferase fold but remarkably, unlike tuberculosinol adenosine synthase and other cis‐prenyl transferases (e.g. cis‐farnesyl, decaprenyl, undecaprenyl diphosphate synthases), the large, hydrophobic side chain does not occupy a central hydrophobic tunnel. Instead, it occupies a surface pocket oriented at 90° to the hydrophobic tunnel. Product chain‐length control is achieved by squeezing out the ligand from the conventional allylic S1 binding site, with proton abstraction being achieved using a diphosphate‐Asn‐Ser relay. The structures revise and unify our thinking as to the mechanism of action of many other prenyl transferases and may also be of use in engineering new merochlorin‐class antibiotics.     

Molecular dynamics simulations of PNIPAM‐co‐PEGMA copolymer hydrophilic to hydrophobic transition in NaCl solution

Classical molecular dynamics simulations were carried out to investigate the hydrophilic to hydrophobic transition of PNIPAM‐co‐PEGMA close to its lower critical solution temperature (LCST) in 1 M NaCl solution. PNIPAM‐co‐PEGMA is a copolymer of poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene glycol) methacrylate (PEGMA). The copolymer consists of 38 monomer units of NIPAM with two PEGMA chains attached to the PNIAPM backbone. The PNIPAM‐co‐PEGMA was observed to go through the hydrophilic?hydrophobic conformational change for simulations at temperature slightly above its LCST. Na⁺ ions were found to bind strongly and directly with amide O, even more strongly with the O atoms on PEGAMS chains, whereas Cl^? ions only exhibit weak interaction with the polymer. Significantly a novel caged stable metal‐organic complex involving a Na⁺ ion coordinated by six O atoms from the copolymer was observed after the PNIPAM‐co‐PEGMA copolymer went through conformational transition to form a hydrophobic folded structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Formation and Properties of Self‐Assembly‐Driven Fluorescent Nanoparticle Sensors

Fluorescent nanoparticles (FNPs) are obtained in water by self‐assembly from a polymeric ionic liquid, fluorescent carboxylate moiety, and a surfactant through two main supramolecular interactions, that is, ionic bonds and hydrophobic/hydrophilic interactions. The hydrophobicity of the surfactant is tunable and a highly hydrophobic surfactant increases the fluorescence intensity and stability of the FNPs. The fluorescence of the FNPs is sensitive to a quenching effect by various ions with high selectivity, and consequently, they may be used as sensors. The self‐assembly approach used to generate the FNPs is considerably simpler than other methods based on more challenging synthetic methods and the flexibility of the approach should allow a wide and diverse range of FNPs to be prepared with specific sensor applications.     

表面活性剂对污泥脱水性能影响的机理研究:Gemini表面活性剂与聚电解质相互作用的分子动力学模拟

表面活性剂可以与污泥表面的胞外聚合物(EPS)吸附形成胶束,释放出自由水和结合水,从而达到改善污泥脱水性能的目的.本文采用粗粒化的分子动力学模拟方法,研究了Gemini表面活性剂与EPS形成复合物的过程和结构.聚电解质链的亲疏水性对吸附过程有显著影响,亲水聚电解质链与Gemini表面活性剂吸附的主要驱动力为静电吸引,Gemini表面活性剂头基吸附在链上,尾链朝向溶剂;疏水聚电解质链与Gemini表面活性剂吸附过程由静电作用与疏水作用共同促进,Gemini表面活性剂以平行于聚电解质链的构型存在.Gemini表面活性剂联结基团长度对吸附过程的影响甚微;聚电解质链的电荷密度对亲水聚电解质链的吸附产生协同作用,对疏水聚电解质链的吸附不产生作用.     

An Efficient Thiol‐Ene Chemistry for the Preparation of Amphiphilic PHA‐Based Graft Copolymers

We present a straightforward method to prepare amphiphilic graft copolymers consisting of hydrophobic poly(3‐hydroxyalkanoates) (PHAs) backbone and hydrophilic α‐amino‐ω‐methoxy poly(oxyethylene‐co‐oxypropylene) (Jeffamine®) units. Poly(3‐hydroxyoctanoate)‐co‐(3‐hydroxyundecenoate) (PHOU) was first methanolyzed to obtain the desired molar mass. The amino end groups of Jeffamine were converted into thiol by a reaction with N‐acetylhomocysteine thiolactone and subsequently photografted. This “one‐pot” functionalization prevents from arduous and time‐consuming functionalization of the hydrophilic precursor or tedious modifications of PHAs, thus simplifying the process. The amphiphilic nature of modified PHAs leads to water‐soluble copolymers exhibiting thermoresponsive behavior.     

Thermally cleavable surfactants based on furan-maleimide Diels-Alder adducts

Two new surfactant molecules are reported that contain thermally labile Diels-Alder adducts connecting the hydrophilic and hydrophobic sections of each molecule. The two surfactants possess identical hydrophobic dodecyl tail segments but have phenol and carboxylic acid hydrophilic headgroups, respectively. Deprotonation with potassium hydroxide affords the formation of water-soluble surfactants. Room temperature aqueous solutions of both surfactants exhibit classical surface-active agent behavior similar to common analagous alkylaryl surfactant molecules. Critical micelle concentrations have been determined for each surfactant through dynamic surface tension and dye solubilization techniques. Small-angle neutron scattering measurements of the aqueous surfactant solutions indicate the presence of spherical micelles with radii of 16.5 angstroms for the carboxylate and 18.8 angstroms for the phenolate. When these surfactants are exposed to elevated temperatures (>50 degrees C), the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments. Aqueous solutions of each surfactant subsequently exhibit a loss of all surface-active behavior and the micellar aggregates are no longer detectable.     

Synthesis of β‐Cyclodextrin Containing Copolymer via “Click” Chemistry and Its Self‐Assembly in the Presence of Guest Compounds

We report the synthesis of a hydrophilic copolymer with one polyethylene glycol (PEG) block and one β‐cyclodextrin (β‐CD) containing block by a “click” reaction between azido‐substituted β‐CD and propargyl flanking copolymer. ¹H NMR study suggested a highly efficient conjugation of β‐CD units by this approach. The obtained copolymer was used as a host macromolecule to construct assemblies in the presence of hydrophobic guests. For assemblies containing a hydrophobic polymer, their size can be simply adjusted by simply changing the content of hydrophobic component. By serving as a guest molecule, hydrophobic drugs can also be loaded accompanying the formation of nanoparticles, and the drug payload is releasable. Therefore, the copolymer synthesized herein can be employed as a carrier for drug delivery.     

Stoichiometrically Controlled Revocable Self‐Assembled “Spiro” versus Quadruple‐Stranded “Double‐Decker” Type Coordination Cages

The simple combination of Pd^II with the tris‐monodentate ligand bis(pyridin‐3‐ylmethyl) pyridine‐3,5‐dicarboxylate, L , at ratios of 1:2 and 3:4 demonstrated the stoichiometrically controlled exclusive formation of the “spiro‐type” Pd₁L₂ macrocycle, 1 , and the quadruple‐stranded Pd₃L₄ cage, 2 , respectively. The architecture of 2 is elaborated with two compartments that can accommodate two units of fluoride, chloride, or bromide ions, one in each of the enclosures. However, the entry of iodide is altogether restricted. Complexes 1 and 2 are interconvertible under suitable conditions.     

An Antibody with a Variable‐Region Coiled‐Coil “Knob” Domain

The X‐ray crystal structure of a bovine antibody (BLV1H12) revealed a unique structure in its ultralong heavy chain complementarity determining region 3 (CDR3H) that folds into a solvent‐exposed β‐strand “stalk” fused to a disulfide crosslinked “knob” domain. We have substituted an antiparallel heterodimeric coiled‐coil motif for the β‐strand stalk in this antibody. The resulting antibody (Ab‐coil) expresses in mammalian cells and has a stability similar to that of the parent bovine antibody. MS analysis of H–D exchange supports the coiled‐coil structure of the substituted peptides. Substitution of the knob‐domain of Ab‐coil with bovine granulocyte colony‐stimulating factor (bGCSF) results in a stably expressed chimeric antibody, which proliferates mouse NFS‐60 cells with a potency comparable to that of bGCSF. This work demonstrates the utility of this novel coiled‐coil CDR3 motif as a means for generating stable, potent antibody fusion proteins with useful pharmacological properties.     

Preparation of polyHIPE via CuAAC “click” chemistry and its application as a highly efficient adsorbent of Cu(II) ions

A hydrophilic emulsion‐templated porous polymer (polyHIPE) is synthesized by CuAAC “click” chemistry. Herein, a 4,4′‐diazidostilbene‐2,2′‐disulfonic acid disodium salt‐4H₂O (DAS) and tripropargylamine in the mixture of water and N,N‐dimethylformamide solution is used as external phase of the high internal phase emulsion template, and paraffin liquid is involved as the internal phase. The resulting polyHIPE has a well‐defined interconnected pore structure, which could be tailored by changing preparation parameters, such as reagent content, internal phase volume fraction, and surfactant concentration. Thermal analysis shows that the polyHIPE is stable under 180 °C. Owing to the presence of a large number of sodium sulfonate groups from the reagent DAS and the triazoles groups produced in the reaction, the polyHIPE is proved to be a highly efficient adsorbent of heavy metal ion (i.e., up to 52 mg/g for Cu(II) ions) in water. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2129–2135     

Ab Initio Emulsion Atom‐Transfer Radical Polymerization

Stable latexes of poly(meth)acrylates with predetermined molecular weights, narrow molecular‐weight distributions, and controlled architecture were prepared by true ab initio emulsion atom‐transfer radical polymerization. Water‐soluble (macro)initiators in combination with a hydrophilic catalyst, Cu/tris(2‐pyridylmethyl)amine, initiated the polymerization in the aqueous phase. The catalyst strongly interacted with the surfactant sodium dodecyl sulfate (SDS), thereby tuning the polymerization within nucleated hydrophobic polymer particles. Long‐term stable latexes were obtained, even with SDS loading below 3 wt % relative to monomer. Block and gradient copolymers were prepared in situ. The reaction volume and solid content were successfully increased to 100 mL and 40 vol %, respectively, thus suggesting facile scale‐up of this technique. The proposed setup could be integrated in existing industrial plants used for emulsion polymerization.     

“Supramolecular” Amphiphiles Created by Wrapping Poly(styrene) with the Helix‐Forming β‐1,3‐Glucan Polysaccharide

We have demonstrated that giant polymer micelles with a uniform diameter (ca. 200 nm) can be fabricated by “supramolecular wrapping” of poly(styrene) (PS) with the β‐1,3‐glucan polysaccharide, with the β‐1,3‐glucan fastening the PS chains together in a noncovalent fashion to facilitate the formation of a supramolecular polymer network on the O/W emulsion surface. Various spectroscopic and microscopic investigations have revealed that the inner cores of the micelles are comprised of a hydrophobic PS network, whereas the surfaces consist of a hydrophilic β‐1,3‐glucan layer. Accordingly, functional guest molecules can easily be encapsulated inside the cavity through hydrophobic interactions. The encapsulated molecules can simply be released from the micelle cores by peeling off the β‐1,3‐glucan shell in a supramolecular manner. As functional groups can be introduced into the glucose side‐chain unit in a straightforward manner by chemical modification, the micellar surface can acquire further functions useful for molecular recognition. These results show that the micelles obtained could have applications as novel soft nanoparticles, which would be indispensable not only for nanotechnologies, but also for biotechnologies aimed at gene or drug delivery systems.     

Phase behavior of water-in-supercritical carbon dioxide microemulsion with sodium salt of bis(2,2,3,3,4,4,5,5-octafluoro-1-pentanol) sulfosuccinate

The fluorinated analogues of AOT surfactant, sodium salt of bis(2,2,3,3,4,4,5,5-octafluoro-1-pentanol) sulfosuccinate, which has CO₂-philic chains and a hydrophilic head group, was synthesized for forming water-in-CO₂ microemulsion. The cloud point of this surfactant was measured and the supercritical fluid-phase behavior of water-in-CO₂ microemulsion was investigated by using a variable-volume view cell apparatus. It was found that the phase behavior of microemulsion is affected by the concentrations of water and surfactant in CO₂, molar ratio of water to surfactant (W_o = [water]/[surfactant]), and the amount of CO₂. From this experiment, we found out another cloudy point which exists above the homogeneous microemulsion region. We defined this point as “upper cloud point” and general cloud point as “lower cloud point. The region which exists between these two cloud points was defined as “stable region of microemulsion”. Conditions for the formation of water-in-CO₂ microemulsion were obtained at temperatures up to 370.15 K.     

Amphiphilic block copolymer self‐assemblies of poly(NVP)‐b‐poly(MDO‐co‐vinyl esters): Tunable dimensions and functionalities

Functional, degradable polymers were synthesized via the copolymerization of vinyl acetate (VAc) and 2‐methylene‐1,3‐dioxepane (MDO) using a macro‐xanthate CTA, poly(N‐vinylpyrrolidone), resulting in the formation of amphiphilic block copolymers of poly(NVP)‐b‐poly(MDO‐co‐VAc). The behavior of the block copolymers in water was investigated and resulted in the formation of self‐assembled nanoparticles containing a hydrophobic core and a hydrophilic corona. The size of the resultant nanoparticles was able to be tuned with variation of the hydrophilic and hydrophobic segments of the core and corona by changing the incorporation of the macro‐CTA as well as the monomer composition in the copolymers, as observed by Dynamic Light Scattering, Static Light Scattering, and Transmission Electron Microscopy analyses. The concept was further applied to a VAc derivative monomer, vinyl bromobutanoate, to incorporate further functionalities such as fluorescent dithiomaleimide groups throughout the polymer backbone using azidation and “click” chemistry as postpolymerization tools to create fluorescently labeled nanoparticles. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2699–2710     

Molecular Dynamics Study of N-Dodecyl-N,N-Dimethyl-3-Ammonio-1-Propanesulfonate Mono-Layer Adsorbed at the Air/Water Interface

Molecular dynamics (MD) simulation has been carried out to investigate the properties of a mono-layer of N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (SB12-3) adsorbed at the air/water interface. The simulation results show that SB12-3 can form a closely packed mono-layer at the air/water interface, the anionic sulfonic groups of the hydrophilic head group have stronger interactions with the water molecules by comparison with the cationic quaternary nitrogen of the hydrophilic head group, and water molecules can gather more easily and aggregate around the sulfonic groups. With the addition of the Ca²⁺ ions, the number of hydrogen bonds between the SB12-3 surfactant molecules and water molecules remains almost unchanged, which may explain the salt resistance behavior for SB12-3 especially for di-valent ions. The hydrophobic tail in SB12-3 is more ordered in the beginning of the chain.