An Aqueous Conducting Redox-Polymer-Based Proton Battery that Can Withstand Rapid Constant-Voltage Charging and Sub-Zero Temperatures

Electrodes based on organic matter operating in aqueous electrolytes enable new approaches and technologies for assembling and utilizing batteries that are difficult to achieve with traditional electrode materials. Here, we report how thiophene-based trimeric structures with naphthoquinone or hydroquinone redox-active pendent groups can be processed in solution, deposited, dried and subsequently polymerized in solid state to form conductive (redox) polymer layers without any additives. Such post-deposition polymerization offers efficient use of material, high mass loading (up to 10 mg cm⁻²) and good flexibility in the choice of substrate and coating method. By employing these materials as anode and cathode in an acidic aqueous electrolyte a rocking-chair proton battery is built. The battery shows good cycling stability (85 % after 500 cycles), withstands rapid charging, with full capacity (60 mAh g⁻¹) reached within 100 seconds, allows for direct integration with photovoltaics, and retains its favorable characteristics even at −24 °C.     

An Aqueous Redox‐Flow Battery with High Capacity and Power: The TEMPTMA/MV System

Redox‐flow batteries (RFB) can easily store large amounts of electric energy and thereby mitigate the fluctuating output of renewable power plants. They are widely discussed as energy‐storage solutions for wind and solar farms to improve the stability of the electrical grid. Most common RFB concepts are based on strongly acidic metal‐salt solutions or poorly performing organics. Herein we present a battery which employs the highly soluble N,N,N‐2,2,6,6‐heptamethylpiperidinyl oxy‐4‐ammonium chloride (TEMPTMA) and the viologen derivative N,N′‐dimethyl‐4,4‐bipyridinium dichloride (MV) in a simple and safe aqueous solution as redox‐active materials. The resulting battery using these electrolyte solutions has capacities of 54 Ah L^?1, giving a total energy density of 38 Wh L^?1 at a cell voltage of 1.4 V. With peak current densities of up to 200 mA cm^?2 the TEMPTMA/MV system is a suitable candidate for compact high‐capacity and high‐power applications.     

Single‐Molecule Redox‐Targeting Reactions for a pH‐Neutral Aqueous Organic Redox Flow Battery

Aqueous organic redox flow batteries (AORFBs) have received considerable attention for large‐scale energy storage. Quinone derivatives, such as 9,10‐anthraquinone‐2,7‐disulphonic acid (2,7‐AQDS), have been explored intensively owing to potentially low cost and swift reaction kinetics. However, the low solubility in pH‐neutral electrolytes restricts their application to corrosive acidic or caustic systems. Herein, the single molecule redox‐targeting reactions of 2,7‐AQDS anolyte are presented to circumvent its solubility limit in pH‐neutral electrolytes. Polyimide was employed as a low‐cost high‐capacity solid material to boost the capacity of 2,7‐AQDS electrolyte to 97 Ah L^?1. Through in situ FTIR spectroscopy, a hydrogen‐bonding mediated reaction mechanism was disclosed. In conjunction with NaI as catholyte and nickel hexacyanoferrate as the catholyte capacity booster, a single‐molecule redox‐targeting reaction‐based full cell with energy density up to 39 Wh L^?1 was demonstrated.     

An Aqueous Symmetric Sodium‐Ion Battery with NASICON‐Structured Na3MnTi(PO4)3

A symmetric sodium‐ion battery with an aqueous electrolyte is demonstrated; it utilizes the NASICON‐structured Na₃MnTi(PO₄)₃ as both the anode and the cathode. The NASICON‐structured Na₃MnTi(PO₄)₃ possesses two electrochemically active transition metals with the redox couples of Ti⁴⁺/Ti³⁺ and Mn³⁺/Mn²⁺ working on the anode and cathode sides, respectively. The symmetric cell based on this bipolar electrode material exhibits a well‐defined voltage plateau centered at about 1.4 V in an aqueous electrolyte with a stable cycle performance and superior rate capability. The advent of aqueous symmetric sodium‐ion battery with high safety and low cost may provide a solution for large‐scale stationary energy storage.     

Cation‐Dependent Stabilization of Electrogenerated Naphthalene Diimide Dianions in Porous Polymer Thin Films and Their Application to Electrical Energy Storage

Porous polymer networks (PPNs) are attractive materials for capacitive energy storage because they offer high surface areas for increased double‐layer capacitance, open structures for rapid ion transport, and redox‐active moieties that enable faradaic (pseudocapacitive) energy storage. Here we demonstrate a new attractive feature of PPNs—the ability of their reduced forms (radical anions and dianions) to interact with small radii cations through synergistic interactions arising from densely packed redox‐active groups, only when prepared as thin films. When naphthalene diimides (NDIs) are incorporated into PPN films, the carbonyl groups of adjacent, electrochemically generated, NDI radical anions and dianions bind strongly to K⁺, Li⁺, and Mg²⁺, shifting the formal potentials of NDI’s second reduction by 120 and 460 mV for K⁺ and Li⁺‐based electrolytes, respectively. In the case of Mg²⁺, NDI’s two redox waves coalesce into a single two‐electron process with shifts of 240 and 710 mV, for the first and second reductions, respectively, increasing the energy density by over 20 % without changing the polymer backbone. In contrast, the formal reduction potentials of NDI derivatives in solution are identical for each electrolyte, and this effect has not been reported for NDI previously. This study illustrates the profound influence of the solid‐state structure of a polymer on its electrochemical response, which does not simply reflect the solution‐phase redox behavior of its monomers.     

Direct Solar Charging of an Organic–Inorganic,Stable, and Aqueous Alkaline Redox Flow Battery with a Hematite Photoanode

The intermittent nature of the sunlight and its increasing contribution to electricity generation is fostering the energy storage research. Direct solar charging of an auspicious type of redox flow battery could make solar energy directly and efficiently dispatchable. The first solar aqueous alkaline redox flow battery using low cost and environmentally safe materials is demonstrated. The electrolytes consist of the redox couples ferrocyanide and anthraquinone‐2,7‐disulphonate in sodium hydroxide solution, yielding a standard cell potential of 0.74 V. Photovoltage enhancement strategies are demonstrated for the ferrocyanide‐hematite junction by employing an annealing treatment and growing a layer of a conductive polyaniline polymer on the electrode surface, which decreases electron–hole recombination.     

High‐Temperature and High‐Energy‐Density Dipolar Glass Polymers Based on Sulfonylated Poly(2,6‐dimethyl‐1,4‐phenylene oxide)

A new class of high‐temperature dipolar polymers based on sulfonylated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SO₂‐PPO) was synthesized by post‐polymer functionalization. Owing to the efficient rotation of highly polar methylsulfonyl side groups below the glass transition temperature (T_g≈220 °C), the dipolar polarization of these SO₂‐PPOs was enhanced, and thus the dielectric constant was high. Consequently, the discharge energy density reached up to 22 J cm^?3. Owing to its high T_g , the SO₂‐PPO₂₅ sample also exhibited a low dielectric loss. For example, the dissipation factor (tan δ) was 0.003, and the discharge efficiency at 800 MV m^?1 was 92 %. Therefore, these dipolar glass polymers are promising for high‐temperature, high‐energy‐density, and low‐loss electrical energy storage applications.     

An Open‐Circuit Voltage and Power Conversion Efficiency Study of Fullerene Ternary Organic Solar Cells Based on Oligomer/Oligomer and Oligomer/Polymer

Variations in the open‐circuit voltage (V _oc) of ternary organic solar cells are systematically investigated. The initial study of these devices consists of two electron‐donating oligomers, S2 (two units) and S7 (seven units), and the electron‐accepting [6,6]‐phenyl C71 butyric acid methyl ester (PC₇₁BM) and reveals that the V _oc is continuously tunable due to the changing energy of the charge transfer state (E _ct) of the active layers. Further investigation suggests that V _oc is also continuously tunable upon change in E _ct in a ternary blend system that consists of S2 and its corresponding polymer (P11):PC₇₁BM. It is interesting to note that higher power conversion efficiencies can be obtained for both S2:S7:PC₇₁BM and S2:P11:PC₇₁BM ternary systems compared with their binary systems, which can be ascribed to an improved V _oc due to the higher E _ct and an improved fill factor due to the improved film morphology upon the incorporation of S2. These findings provide a new guideline for the future design of conjugated polymers for achieving higher performance of ternary organic solar cells.