Crystal-Phase-Engineered PdCu Electrocatalyst for Enhanced Ammonia Synthesis

Crystal phase engineering is a powerful strategy for regulating the performance of electrocatalysts towards many electrocatalytic reactions, while its impact on the nitrogen electroreduction has been largely unexplored. Herein, we demonstrate that structurally ordered body-centered cubic (BCC) PdCu nanoparticles can be adopted as active, selective, and stable electrocatalysts for ammonia synthesis. Specifically, the BCC PdCu exhibits excellent activity with a high NH₃ yield of 35.7 μg h⁻¹ mg⁻¹_cat, Faradaic efficiency of 11.5 %, and high selectivity (no N₂H₄ is detected) at −0.1 V versus reversible hydrogen electrode, outperforming its counterpart, face-centered cubic (FCC) PdCu, and most reported nitrogen reduction reaction (NRR) electrocatalysts. It also exhibits durable stability for consecutive electrolysis for five cycles. Density functional theory calculation reveals that strong orbital interactions between Pd and neighboring Cu sites in BCC PdCu obtained by structure engineering induces an evident correlation effect for boosting up the Pd 4d electronic activities for efficient NRR catalysis. Our findings open up a new avenue for designing active and stable electrocatalysts towards NRR.     

Facile Synthesis of PdCu Echinus‐Like Nanocrystals as Robust Electrocatalysts for Methanol Oxidation Reaction

Exploiting high‐performance and inexpensive electrocatalysts for methanol electro‐oxidation is conductive to promoting the commercial application of direct methanol fuel cells. Here, we present a facile synthesis of echinus‐like PdCu nanocrystals (NCs) via a one‐step and template‐free method. The echinus‐like PdCu NCs possess numerous straight and long branches which can provide abundant catalytic active sites. Owing to the novel nanoarchitecture and electronic effect of the PdCu alloy, the echinus‐like PdCu NCs display high electrocatalytic performance toward methanol oxidation reaction in an alkaline medium. The mass activity of echinus‐like PdCu NCs is 1202.1 mA mg_Pd^?1, which is 3.7 times that of Pd/C catalysts. In addition, the echinus‐like structure, as a kind of three‐dimensional self‐supported nanoarchitecture, endows PdCu NCs with significantly enhanced stability and durability. Hence, the echinus‐like PdCu NCs hold prospect of being employed as electrocatalysts for direct alcohol fuel cells.     

Carbon‐Nanoplated CoS@TiO2 Nanofibrous Membrane: An Interface‐Engineered Heterojunction for High‐Efficiency Electrocatalytic Nitrogen Reduction

Developing noble‐metal‐free electrocatalysts is important to industrially viable ammonia synthesis through the nitrogen reduction reaction (NRR). However, the present transition‐metal electrocatalysts still suffer from low activity and Faradaic efficiency due to poor interfacial reaction kinetics. Herein, an interface‐engineered heterojunction, composed of CoS nanosheets anchored on a TiO₂ nanofibrous membrane, is developed. The TiO₂ nanofibrous membrane can uniformly confine the CoS nanosheets against agglomeration, and contribute substantially to the NRR performance. The intimate coupling between CoS and TiO₂ enables easy charge transfer, resulting in fast reaction kinetics at the heterointerface. The conductivity and structural integrity of the heterojunction are further enhanced by carbon nanoplating. The resulting C@CoS@TiO₂ electrocatalyst achieves a high ammonia yield (8.09×10^?10 mol s^?1 cm^?2) and Faradaic efficiency (28.6 %), as well as long‐term durability.     

A Facile Strategy to PdCu Bimetallic Alloy Nanosponges with Highly Porous Features as a High‐Performance Electrocatalytic Activity for Ethanol Electrooxidation in an Alkaline Medium

Well‐defined three‐dimensional (3D) PdCu bimetallic alloy nanosponges (BANs) with highly porous structure was reported through a rapid and general strategy. Significantly, the as‐prepared PdCu BANs exhibited greatly enhanced activity and stability than commercial Pd/C catalyst towards ethanol electrooxidation in an alkaline medium. Pd₁Cu₁ shows higher active area and better electrocatalytic activity than Pd₁Cu₂ and Pd₂Cu₁. This result demonstrates the potential of applying these PdCu BANs as effective electrocatalysts for direct alcohol fuel cells (DAFCs).     

Defect Engineering Metal‐Free Polymeric Carbon Nitride Electrocatalyst for Effective Nitrogen Fixation under Ambient Conditions

Electrocatalytic nitrogen reduction reaction (NRR) under ambient conditions provides an intriguing picture for the conversion of N₂ into NH₃. However, electrocatalytic NRR mainly relies on metal‐based catalysts, and it remains a grand challenge in enabling effective N₂ activation on metal‐free catalysts. Here we report a defect engineering strategy to realize effective NRR performance (NH₃ yield: 8.09 μg h^?1 mg^?1_cat., Faradaic efficiency: 11.59 %) on metal‐free polymeric carbon nitride (PCN) catalyst. Illustrated by density functional theory calculations, dinitrogen molecule can be chemisorbed on as‐engineered nitrogen vacancies of PCN through constructing a dinuclear end‐on bound structure for spatial electron transfer. Furthermore, the N?N bond length of adsorbed N₂ increases dramatically, which corresponds to “strong activation” system to reduce N₂ into NH₃. This work also highlights the significance of defect engineering for improving electrocatalysts with weak N₂ adsorption and activation ability.     

Surface‐Regulated Rhodium–Antimony Nanorods for Nitrogen Fixation

Surface regulation is an effective strategy to improve the performance of catalysts, but it has been rarely demonstrated for nitrogen reduction reaction (NRR) to date. Now, surface‐rough Rh₂Sb nanorod (RNR) and surface‐smooth Rh₂Sb NR (SNR) were selectively created, and their performance for NRR was investigated. The high‐index‐facet bounded Rh₂Sb RNRs/C exhibit a high NH₃ yield rate of 228.85±12.96 μg h^?1 mg^?1_Rh at ?0.45 V versus reversible hydrogen electrode (RHE), outperforming the Rh₂Sb SNRs/C (63.07±4.45 μg h^?1 mg^?1_Rh) and Rh nanoparticles/C (22.82±1.49 μg h^?1 mg^?1_Rh), owing to the enhanced adsorption and activation of N₂ on high‐index facets. Rh₂Sb RNRs/C also show durable stability with negligible activity decay after 10 h of successive electrolysis. The present work demonstrates that surface regulation plays an important role in promoting NRR activity and provides a new strategy for creating efficient NRR electrocatalysts.     

A Janus Fe‐SnO2 Catalyst that Enables Bifunctional Electrochemical Nitrogen Fixation

Electrochemical N₂ reduction reactions (NRR) and the N₂ oxidation reaction (NOR), using H₂O and N₂, are a sustainable approach to N₂ fixation. To date, owing to the chemical inertness of nitrogen, emerging electrocatalysts for the electrochemical NRR and NOR at room temperature and atmospheric pressure remain largely underexplored. Herein, a new‐type Fe‐SnO₂ was designed as a Janus electrocatalyst for achieving highly efficient NRR and NOR catalysis. A high NH₃ yield of 82.7 μg h^?1 mg_cat.^?1 and a Faraday efficiency (FE) of 20.4 % were obtained for NRR. This catalyst can also serve as an excellent NOR electrocatalyst with a NO₃^? yields of 42.9 μg h^?1 mg_cat.^?1 and a FE of 0.84 %. By means of experiments and DFT calculations, it is revealed that the oxygen vacancy‐anchored single‐atom Fe can effectively adsorb and activate chemical inert N₂ molecules, lowering the energy barrier for the vital breakage of N≡N and resulting in the enhanced N₂ fixation performance.     

Vacancy Engineering of Iron‐Doped W18O49 Nanoreactors for Low‐Barrier Electrochemical Nitrogen Reduction

The electrochemical nitrogen reduction reaction (NRR) is a promising energy‐efficient and low‐emission alternative to the traditional Haber–Bosch process. Usually, the competing hydrogen evolution reaction (HER) and the reaction barrier of ambient electrochemical NRR are significant challenges, making a simultaneous high NH₃ formation rate and high Faradic efficiency (FE) difficult. To give effective NRR electrocatalysis and suppressed HER, the surface atomic structure of W₁₈O₄₉, which has exposed active W sites and weak binding for H₂, is doped with Fe. A high NH₃ formation rate of 24.7 μg h^?1 mg_cat^?1 and a high FE of 20.0 % are achieved at an overpotential of only ?0.15 V versus the reversible hydrogen electrode. Ab initio calculations reveal an intercalation‐type doping of Fe atoms in the tunnels of the W₁₈O₄₉ crystal structure, which increases the oxygen vacancies and exposes more W active sites, optimizes the nitrogen adsorption energy, and facilitates the electrocatalytic NRR.     

Clean Synthesis of an Economical 3D Nanochain Network of PdCu Alloy with Enhanced Electrocatalytic Performance towards Ethanol Oxidation

A one‐pot method for the fast synthesis of a 3D nanochain network (NNC) of PdCu alloy without any surfactants is described. The composition of the as‐prepared PdCu alloy catalysts can be precisely controlled by changing the precursor ratio of Pd to Cu. First, the Cu content changes the electronic structure of Pd in the 3D NNC of PdCu alloy. Second, the 3D network structure offers large open pores, high surface areas, and self‐supported properties. Third, the surfactant‐free strategy results in a relatively clean surface. These factors all contribute to better electrocatalytic activity and durability towards ethanol oxidation. Moreover, the use of copper in the alloy lowers the price of the catalyst by replacing the noble metal palladium with non‐noble metal copper. The composition‐optimized Pd₈₀Cu₂₀ alloy in the 3D NNC catalyst shows an increased electrochemically active surface area (80.95 m² g^?1) and a 3.62‐fold enhancement of mass activity (6.16 A mg^?1) over a commercial Pd/C catalyst.     

Antimony‐Based Composites Loaded on Phosphorus‐Doped Carbon for Boosting Faradaic Efficiency of the Electrochemical Nitrogen Reduction Reaction

A nanocomposite of PC/Sb/SbPO₄ (PC, phosphorus‐doped carbon) exhibits a high activity and an excellent selectivity for efficient electrocatalytic conversion of N₂ to NH₃ in both acidic and neutral electrolytes under ambient conditions. At a low reductive potential of ?0.15 V versus the reversible hydrogen electrode (RHE), the PC/Sb/SbPO₄ catalyst achieves a high Faradaic efficiency (FE) of 31 % for ammonia production in 0.1 m HCl under mild conditions. In particular, a remarkably high FE value of 34 % is achieved at a lower reductive potential of ?0.1 V (vs. RHE) in a 0.1 m Na₂SO₄ solution, which is better than most reported electrocatalysts towards the nitrogen reduction reaction (NRR) in neutral electrolyte under mild conditions. The change in surface species and electrocatalytic performance before and after N₂ reduction is explored by an ex situ method. PC and SbPO₄ are both considered as the active species that enhanced the performance of NRR.     

Exchange‐Coupled fct‐FePd/α‐Fe Nanocomposite Magnets Converted from Pd/Fe3O4 Core/Shell Nanoparticles

We report the controlled synthesis of exchange‐coupled face‐centered tetragonal (fct) FePd/α‐Fe nanocomposite magnets with variable Fe concentration. The composite was converted from Pd/Fe₃O₄ core/shell nanoparticles through a high‐temperature annealing process in a reducing atmosphere. The shell thickness of core/shell Pd/Fe₃O₄ nanoparticles could be readily tuned, and subsequently the concentration of Fe in nanocomposite magnets was controlled. Upon annealing reduction, the hard magnetic fct‐FePd phase was formed by the interdiffusion between reduced α‐Fe and face‐centered cubic (fcc) Pd, whereas the excessive α‐Fe remained around the fct‐FePd grains, realizing exchange coupling between the soft magnetic α‐Fe and hard magnetic fct‐FePd phases. Magnetic measurements showed variation in the magnetic properties of the nanocomposite magnets with different compositions, indicating distinct exchange coupling at the interfaces. The coercivity of the exchange‐coupled nanocomposites could be tuned from 0.7 to 2.8 kOe and the saturation magnetization could be controlled from 93 to 160 emu g^?1. This work provides a bottom‐up approach using exchange‐coupled nanocomposites for engineering advanced permanent magnets with controllable magnetic properties.     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

General π‐Electron‐Assisted Strategy for Ir,Pt, Ru,Pd, Fe,Ni Single‐Atom Electrocatalysts with Bifunctional Active Sites for Highly Efficient Water Splitting

Both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) are crucial to water splitting, but require alternative active sites. Now, a general π‐electron‐assisted strategy to anchor single‐atom sites (M=Ir, Pt, Ru, Pd, Fe, Ni) on a heterogeneous support is reported. The M atoms can simultaneously anchor on two distinct domains of the hybrid support, four‐fold N/C atoms (M@NC), and centers of Co octahedra (M@Co), which are expected to serve as bifunctional electrocatalysts towards the HER and the OER. The Ir catalyst exhibits the best water‐splitting performance, showing a low applied potential of 1.603 V to achieve 10 mA cm^?2 in 1.0 m KOH solution with cycling over 5 h. DFT calculations indicate that the Ir@Co (Ir) sites can accelerate the OER, while the Ir@NC₃ sites are responsible for the enhanced HER, clarifying the unprecedented performance of this bifunctional catalyst towards full water splitting.     

The Solid‐Phase Synthesis of an Fe‐N‐C Electrocatalyst for High‐Power Proton‐Exchange Membrane Fuel Cells

The environmentally friendly synthesis of highly active Fe‐N‐C electrocatalysts for proton‐exchange membrane fuel cells (PEMFCs) is desirable but remains challenging. A simple and scalable method is presented to fabricate Fe^II‐doped ZIF‐8, which can be further pyrolyzed into Fe‐N‐C with 3 wt % of Fe exclusively in Fe‐N₄ active moieties. Significantly, this Fe‐N‐C derived acidic PEMFC exhibits an unprecedented current density of 1.65 A cm^?2 at 0.6 V and the highest power density of 1.14 W cm^?2 compared with previously reported NPMCs. The excellent PEMFC performance can be attributed to the densely and atomically dispersed Fe‐N₄ active moieties on the small and uniform catalyst nanoparticles.     

Electrochemical Phase Evolution of Metal‐Based Pre‐Catalysts for High‐Rate Polysulfide Conversion

In situ evolution of electrocatalysts is of paramount importance in defining catalytic reactions. Catalysts for aprotic electrochemistry such as lithium–sulfur (Li‐S) batteries are the cornerstone to enhance intrinsically sluggish reaction kinetics but the true active phases are often controversial. Herein, we reveal the electrochemical phase evolution of metal‐based pre‐catalysts (Co₄N) in working Li‐S batteries that renders highly active electrocatalysts (CoS_x). Electrochemical cycling induces the transformation from single‐crystalline Co₄N to polycrystalline CoS_x that are rich in active sites. This transformation propels all‐phase polysulfide‐involving reactions. Consequently, Co₄N enables stable operation of high‐rate (10 C, 16.7 mA cm^?2) and electrolyte‐starved (4.7 μL mg_S^?1) Li‐S batteries. The general concept of electrochemically induced sulfurization is verified by thermodynamic energetics for most of low‐valence metal compounds.     

Nanoporous Palladium Hydride for Electrocatalytic N2 Reduction under Ambient Conditions

The electrocatalytic nitrogen reduction reaction (NRR) is an alternative eco‐friendly strategy for sustainable N₂ fixation with renewable energy. However, NRR suffers from sluggish kinetics owing to difficult N₂ adsorption and N≡N cleavage. Now, nanoporous palladium hydride is reported as electrocatalyst for electrochemical N₂ reduction under ambient conditions, achieving a high ammonia yield rate of 20.4 μg h^?1 mg^?1 with a Faradaic efficiency of 43.6 % at low overpotential of 150 mV. Isotopic hydrogen labeling studies suggest the involvement of lattice hydrogen atoms in the hydride as active hydrogen source. In situ Raman analysis and density functional theory (DFT) calculations further reveal the reduction of energy barrier for the rate‐limiting *N₂H formation step. The unique protonation mode of palladium hydride would provide a new insight on designing efficient and robust electrocatalysts for nitrogen fixation.     

Amorphous core/shell Ti-doped SnO2 with synergistically improved N2 adsorption/activation and electrical conductivity for electrochemical N2 reduction

Electrochemical nitrogen reduction reaction (NRR) has been considered as an appealing and sustainable method to produce ammonia from N₂ under ambient conditions, attracting increasing interest. Limited by low solubility of N₂ in water and high stability of NN triple bond, developing NRR electrocatalysts with both strong N₂ adsorption/activation and high electrical conductivity remain challenging. Here, we demonstrate an efficient strategy to develop NRR electrocatalyst with synergistically enhanced N₂ adsorption/activation and electrical conductivity by heteroatom doping. Combining computational and experimental study, the DFT-designed Ti-doped SnO₂ exhibits significantly enhanced NRR performance with ammonia yield rate of 13.09 µg h^?1 mg^?1 at ?0.2 V vs. RHE. Particularly, the Faradaic efficiency reaches up to 42.6%, outperforming most of Sn-based electrocatalysts. The fundamental mechanism for improving NRR performance of SnO₂ by Ti doping is also revealed. Our work highlights a powerful strategy for developing high-activity electrocatalysts for NRR and beyond.     

Methane activation at low temperature in an acidic electrolyte using PdAu/C,PdCu/C,and PdTiO2/C electrocatalysts for PEMFC

Pd/C, PdAu/C, PdCu/C, and PdTiO₂/C electrocatalysts were prepared by a sodium borohydride reduction process for methane activation at low temperatures in a PEMFC reactor. These electrocatalysts were characterized by XRD, TEM, XPS, ICP-MS, ATR-FTIR, and cyclic voltammetry. The diffractograms of Pd/C, PdAu(50:50)/C, PdCu(50:50)/C, and PdTiO₂(50:50)/C electrocatalysts showed peaks associated with Pd face-centered cubic structure. PdAu(50:50)/C showed a small shift in the peak center when it was compared to Pd/C, while PdCu(50:50)/C showed a shift to higher angles when it was also compared to Pd/C. This effect can be due to the formation of an alloy between Pd and Au, and Pd and Cu. By TEM experiments, a mean nanoparticle size was observed between 6.9 and 8.9 nm for all electrocatalysts. Cyclic voltammograms of Pd/C, PdAu/C, PdCu/C and PdTiO₂/C electrocatalysts showed an increase in current density values after the adsorption of methane The ATR-FTIR experiments showed for all electrocatalysts the formation of methanol and formic acidic. Polarization curves at 80 °C acquired in a PEMFC reactor showed that PdAu(50:50)/C and PdTiO₂(50:50)/C had superior performance when compared to Pd/C, indicating the beneficial effect of adding the co-catalyst; this behavior has been attributed to the bifunctional mechanism or electronic effect.

     

N2 Electroreduction to NH3 by Selenium Vacancy‐Rich ReSe2 Catalysis at an Abrupt Interface

Vacancy engineering has been proved repeatedly as an adoptable strategy to boost electrocatalysis, while its poor selectivity restricts the usage in nitrogen reduction reaction (NRR) as overwhelming competition from hydrogen evolution reaction (HER). Revealed by density functional theory calculations, the selenium vacancy in ReSe₂ crystal can enhance its electroactivity for both NRR and HER by shifting the d‐band from ?4.42 to ?4.19 eV. To restrict the HER, we report a novel method by burying selenium vacancy‐rich ReSe₂@carbonized bacterial cellulose (V_r‐ReSe₂@CBC) nanofibers between two CBC layers, leading to boosted Faradaic efficiency of 42.5 % and ammonia yield of 28.3 μg h^?1 cm^?2 at a potential of ?0.25 V on an abrupt interface. As demonstrated by the nitrogen bubble adhesive force, superhydrophilic measurements, and COMSOL Multiphysics simulations, the hydrophobic and porous CBC layers can keep the internal V_r‐ReSe₂@CBC nanofibers away from water coverage, leaving more unoccupied active sites for the N₂ reduction (especially for the potential determining step of proton‐electron coupling and transferring processes as *NN → *NNH).     

Electrocatalytically Active Fe‐(O‐C2)4 Single‐Atom Sites for Efficient Reduction of Nitrogen to Ammonia

Single‐atom catalysts have demonstrated their superiority over other types of catalysts for various reactions. However, the reported nitrogen reduction reaction single‐atom electrocatalysts for the nitrogen reduction reaction exclusively utilize metal–nitrogen or metal–carbon coordination configurations as catalytic active sites. Here, we report a Fe single‐atom electrocatalyst supported on low‐cost, nitrogen‐free lignocellulose‐derived carbon. The extended X‐ray absorption fine structure spectra confirm that Fe atoms are anchored to the support via the Fe‐(O‐C₂)₄ coordination configuration. Density functional theory calculations identify Fe‐(O‐C₂)₄ as the active site for the nitrogen reduction reaction. An electrode consisting of the electrocatalyst loaded on carbon cloth can afford a NH₃ yield rate and faradaic efficiency of 32.1 μg h^?1 mg_cat.^?1 (5350 μg h^?1 mg_Fe^?1) and 29.3 %, respectively. An exceptional NH₃ yield rate of 307.7 μg h^?1 mg_cat.^?1 (51 283 μg h^?1 mg_Fe^?1) with a near record faradaic efficiency of 51.0 % can be achieved with the electrocatalyst immobilized on a glassy carbon electrode.