DNA with 3′‐5′‐Disulfide Links—Rapid Chemical Ligation through Isosteric Replacement

Efforts to chemically ligate oligonucleotides, without resorting to biochemical enzymes, have led to a multitude of synthetic analogues, and have extended oligomer ligation to reactions of novel oligonucleotides, peptides, and hybrids such as PNA. 1 Key requirements for potential diagnostic tools not based on PCR include a fast templated chemical DNA ligation method that exhibits high pairing selectivity, and a sensitive detection method. Here we report on a solid‐phase synthesis of oligonucleotides containing 5′‐ or 3′‐mercapto‐dideoxynucleotides and their chemical ligations, yielding 3′‐5′‐disulfide bonds as a replacement for 3′‐5′‐phosphodiester units. Employing a system designed for fluorescence monitoring, we demonstrate one of the fastest ligation reactions with half‐lives on the order of seconds. The nontemplated ligation reaction is efficiently suppressed by the choice of DNA modification and the 3′‐5′ orientation of the activation site. The influence of temperature on the templated reaction is shown.     

Template‐Directed Copying of RNA by Non‐enzymatic Ligation

The non‐enzymatic replication of the primordial genetic material is thought to have enabled the evolution of early forms of RNA‐based life. However, the replication of oligonucleotides long enough to encode catalytic functions is problematic due to the low efficiency of template copying with mononucleotides. We show that template‐directed ligation can assemble long RNAs from shorter oligonucleotides, which would be easier to replicate. The rate of ligation can be greatly enhanced by employing a 3′‐amino group at the 3′‐end of each oligonucleotide, in combination with an N‐alkyl imidazole organocatalyst. These modifications enable the copying of RNA templates by the multistep ligation of tetranucleotide building blocks, as well as the assembly of long oligonucleotides using short splint oligonucleotides. We also demonstrate the formation of long oligonucleotides inside model prebiotic vesicles, which suggests a potential route to the assembly of artificial cells capable of evolution.     

3′‐Deoxyribopyranose (4′→2′)‐Oligonucleotide Duplexes (=p‐DNA Duplexes) as Substitutes of RNA Hairpin Structures

By automated synthesis, we prepared hybrid oligonucleotides consisting of covalently linked RNA and p‐DNA sequences (p‐DNA=3′‐deoxyribopyranose (4′→2′)‐oligonucleotides) (see Table 1). The pairing properties of corresponding hybrid duplexes, formed from fully complementary single strands were investigated. An uninterrupted π‐π‐stacking at the p‐DNA/RNA interface and cooperative pairing between the two systems was achieved by connecting them via a 4′‐p‐DNA‐2′→5′‐RNA‐3′ and 5′‐RNA‐2′→4′‐p‐DNA‐2′ phosphodiester linkage, respectively (see Fig. 4). The RNA 2′‐phosphoramidites 9 – 12 , required for the formation of the RNA‐2′→4′‐p‐DNA phosphodiester linkage were synthesized from the corresponding, 3′‐O‐tom‐protected ribonucleosides (tom=[(triisopropylsilyl)oxy]methyl; Scheme 1). Analogues of the flavin mononucleotide (=FMN) binding aptamer 22 and the hammerhead ribozyme 25 were prepared. Each of these analogues consisted of two p‐DNA/RNA hybrid single strands with complementary p‐DNA sequences, designed to substitute stem/loop and stem motifs within the parent compounds. By comparative binding and cleavage studies, it was found that mixing of the two complementary p‐DNA/RNA hybrid sequences resulted in the formation of the fully functional analogues 23 ⋅ 24 and 27 ⋅ 28 of the FMN‐binding aptamer and of the hammerhead ribozyme, respectively.     

Efficient Automated Solid‐Phase Synthesis of DNA and RNA 5′‐Triphosphates

A fast, high‐yielding and reliable method for the synthesis of DNA‐ and RNA 5′‐triphosphates is reported. After synthesizing DNA or RNA oligonucleotides by automated oligonucleotide synthesis, 5‐chloro‐saligenyl‐N,N‐diisopropylphosphoramidite was coupled to the 5′‐end. Oxidation of the formed 5′‐phosphite using the same oxidizing reagent used in standard oligonucleotide synthesis led to 5′‐cycloSal‐oligonucleotides. Reaction of the support‐bonded 5′‐cycloSal‐oligonucleotide with pyrophosphate yielded the corresponding 5′‐triphosphates. The 5′‐triphosphorylated DNA and RNA oligonucleotides were obtained after cleavage from the support in high purity and excellent yields. The whole reaction sequence was adapted to be used on a standard oligonucleotide synthesizer.     

2′‐Ethynyl‐DNA: Synthesis and Pairing Properties

2‐Ethynyl‐DNA was developed as a potential DNA‐selective oligonucleotide analog. The synthesis of 2′‐arabino‐ethynyl‐modified nucleosides was achieved starting from properly protected 2′‐ketonucleosides by addition of lithium (trimethylsilyl)acetylide followed by reduction of the tertiary alcohol. After a series of protecting‐group manipulations, phosphoramidite building blocks suitable for solid‐phase synthesis were obtained. The synthesis of oligonucleotides from these building blocks was successful when a fast deprotection scheme was used. The pairing properties of 2′‐arabino‐ethynyl‐modified oligonucleotides can be summarized as follows: 1) The 2′‐arabino‐ethynyl modification of pyrimidine nucleosides leads to a strong destabilization in duplexes with DNA as well as with RNA. The likely reason is that the ethynyl group sterically influences the torsional preferences around the glycosidic bond leading to a conformation not suitable for duplex formation. 2) If the modification is introduced in purine nucleosides, no such influence is observed. The pairing properties are not or only slightly changed, and, in some cases (deoxyadenosine homo‐polymers), the desired stabilization of the pairing with a DNA complementary strand and destabilization with an RNA complement is observed. 3) In oligonucleotides of alternating deoxycytidine‐deoxyguanosine sequence, the incorporation of 2′‐arabino‐ethynyl deoxyguanosine surprisingly leads to the formation of a left‐handed double helix, irrespective of salt concentration. The rationalization for this behavior is that the ethynyl group locks such duplexes in a left‐handed conformation through steric blockade.     

Covalent Chemical 5′‐Functionalization of RNA with Diazo Reagents

Functionalization of RNA at the 5′‐terminus is important for analytical and therapeutic purposes. Currently, these RNAs are synthesized de novo starting with a chemically functionalized 5′‐nucleotide, which is incorporated into RNA using chemical synthesis or biochemical techniques. Methods for direct chemical modification of native RNA would provide an attractive alternative but are currently underexplored. Herein, we report that diazo compounds can be used to selectively alkylate the 5′‐phosphate of ribo(oligo)nucleotides to give RNA labelled through a native phosphate ester bond. We applied this method to functionalize oligonucleotides with biotin and an orthosteric inhibitor of the eukaryotic initiation factor 4E (eIF4E), an enzyme involved in mRNA recognition. The modified RNA binds to eIF4E, demonstrating the utility of this labelling technique to modulate biological activity of RNA. This method complements existing techniques and may be used to chemically introduce a broad range of functional handles at the 5′‐end of RNA.     

Circular DNA by “Bis‐Click” Ligation: Template‐Independent Intramolecular Circularization of Oligonucleotides with Terminal Alkynyl Groups Utilizing Bifunctional Azides

A highly effective and convenient “bis‐click” strategy was developed for the template‐independent circularization of single‐stranded oligonucleotides by employing copper(I)‐assisted azide–alkyne cycloaddition. Terminal triple bonds were incorporated at both ends of linear oligonucleotides. Alkynylated 7‐deaza‐2′‐deoxyadenosine and 2′‐deoxyuridine residues with different side chains were used in solid‐phase synthesis with phosphoramidite chemistry. The bis‐click ligation of linear 9‐ to 36‐mer oligonucleotides with 1,4‐bis(azidomethyl)benzene afforded circular DNA in a simple and selective way; azido modification of the oligonucleotide was not necessary. Short ethynyl side chains were compatible with the circularization of longer oligonucleotides, whereas octadiynyl residues were used for short 9‐mers. Compared with linear duplexes, circular bis‐click constructs exhibit a significantly increased duplex stability over their linear counterparts. The intramolecular bis‐click ligation protocol is not limited to DNA, but may also be suitable for the construction of other macrocycles, such as circular RNAs, peptides, or polysaccharides.     

A New and Efficient Method for Synthesis of 5′‐Conjugates of Oligonucleotides through Amide‐Bond Formation on Solid Phase

An efficient method for synthesis of oligonucleotide 5′‐conjugates through amide‐bond formation on solid phase is described. Protected oligonucleotides containing a 5′‐carboxylic acid function were obtained by use of a novel non‐nucleosidic phosphoramidite building block, where the carboxylic acid moiety was protected by a 2‐chlorotrityl group. The protecting group is stable to the phosphoramidite coupling conditions used in solid‐phase oligonucleotide assembly, but is easily deprotected by mild acidic treatment. The protecting group may be removed also by ammonolysis. 5′‐Carboxylate‐modified oligonucleotides were efficiently conjugated on solid support under normal peptide‐coupling conditions to various amines or to the N‐termini of small peptides to yield products of high purity. The method is well‐suited in principle for the synthesis of peptide‐oligonucleotide conjugates containing an amide linkage between the 5′‐end of an oligonucleotide and the N‐terminus of a peptide.     

Template-Directed Copying of RNA by Non-enzymatic Ligation

The non-enzymatic replication of the primordial genetic material is thought to have enabled the evolution of early forms of RNA-based life. However, the replication of oligonucleotides long enough to encode catalytic functions is problematic due to the low efficiency of template copying with mononucleotides. We show that template-directed ligation can assemble long RNAs from shorter oligonucleotides, which would be easier to replicate. The rate of ligation can be greatly enhanced by employing a 3′-amino group at the 3′-end of each oligonucleotide, in combination with an N-alkyl imidazole organocatalyst. These modifications enable the copying of RNA templates by the multistep ligation of tetranucleotide building blocks, as well as the assembly of long oligonucleotides using short splint oligonucleotides. We also demonstrate the formation of long oligonucleotides inside model prebiotic vesicles, which suggests a potential route to the assembly of artificial cells capable of evolution.     

Combining ligation reaction and capillary gel electrophoresis to obtain reliable long DNA probes

New DNA amplification methods are continuously developed for sensitive detection and quantification of specific DNA target sequences for, e.g. clinical, environmental or food applications. These new applications often require the use of long DNA oligonucleotides as probes for target sequences hybridization. Depending on the molecular technique, the length of DNA probes ranges from 40 to 450 nucleotides, solid-phase chemical synthesis being the strategy generally used for their production. However, the fidelity of chemical synthesis of DNA decreases for larger DNA probes. Defects in the oligonucleotide sequence result in the loss of hybridization efficiency, affecting the sensitivity and selectivity of the amplification method. In this work, an enzymatic procedure has been developed as an alternative to solid-phase chemical synthesis for the production of long oligonucleotides. The enzymatic procedure for probe production was based on ligation of short DNA sequences. Long DNA probes were obtained from smaller oligonucleotides together with a short sequence that acts as bridge stabilizing the molecular complex for DNA ligation. The ligation reactions were monitored by capillary gel electrophoresis with laser-induced fluorescence detection (CGE-LIF) using a bare fused-silica capillary. The capillary gel electrophoresis-LIF method demonstrated to be very useful and informative for the characterization of the ligation reaction, providing important information about the nature of some impurities, as well as for the fine optimization of the ligation conditions (i.e. ligation cycles, oligonucleotide and enzyme concentration). As a result, the yield and quality of the ligation product were highly improved. The in-lab prepared DNA probes were used in a novel multiplex ligation-dependent genome amplification (MLGA) method for the detection of genetically modified maize in samples. The great possibilities of the whole approach were demonstrated by the specific and sensitive detection of transgenic maize at percentages lower than 1%.     

Single-nucleotide-specific PNA-peptide ligation on synthetic and PCR DNA templates

DNA-directed chemical synthesis has matured into a useful tool with applications such as fabrication of defined (nano)molecular architectures, evolution of amplifiable small-molecule libraries, and nucleic acid detection. Most commonly, chemical methods were used to join oligonucleotides under the control of a DNA or RNA template. The full potential of chemical ligation reactions can be uncovered when nonnatural oligonucleotide analogues that can provide new opportunities such as increased stability, DNA affinity, hybridization selectivity, and/or ease and accuracy of detection are employed. It is shown that peptide nucleic acid (PNA) conjugates, nonionic biostable DNA analogues, allowed the fashioning of highly chemoselective and sequence-selective peptide ligation methods. In particular, PNA-mediated native chemical ligations proceed with sequence selectivities and ligation rates that reach those of ligase-catalyzed oligodeoxynucleotide reactions. Usually, sequence-specific ligations can only be achieved by employing short-length probes, which show DNA affinities that are too low to allow stable binding to target segments in large, double-stranded DNA. It is demonstrated that the PNA-based ligation chemistry allowed the development of a homogeneous system in which rapid single-base mutation analyses can be performed even on double-stranded PCR DNA templates.     

A Facile and Cost‐effective Electroanalytical Strategy for the Quantification of Deoxyguanosine and Deoxyadenosine in Oligonucleotides Using Screen‐printed Graphite Electrodes

The development of electroanalytical methods for the detection and quantification of nucleotides in DNA offers vital implications in assessing the degree of oxidation or epigenetic modification in DNA. Unfortunately, the electrochemical response of oligonucleotides is strongly influenced by the size, composition and nucleic base sequence. In this article, an optimized analytical procedure for the enzymatically breakdown of the oligonucleotides to their corresponding nucleotides for the evaluation of the electrochemical response through the use of square wave voltammetry (SWV) is presented. Enzymatic digestion of oligonucleotides has been optimized in terms of buffer composition, digestion time, strategy for stopping the enzymatic reaction and filtration requirement for enzyme removal, and then compared to an established protocol. Under the optimized protocol SWV response of a number of untreated and enzymatically digested six‐mer oligonucleotides, namely 5′‐GGGGGG‐3′, 5′‐AAAAAA‐3′, 5′‐CGCGCG‐3′ and 5′‐AAACGC‐3′ have been analysed, providing a higher sensitivity for the determination of guanosine and adenosine monophosphate species under digestion conditions with a more facile and cost effective procedure. The novel strategy for the enzymatically treated oligonucleotides in combination with the SWV response provides a proof of principle for feasible applications in the diagnosis of methylated guanosine in DNA as a potential biomarker due to its relation with cancer.     

Periodic Melting of Oligonucleotides by Oscillating Salt Concentrations Triggered by Microscale Water Cycles Inside Heated Rock Pores

To understand the emergence of life, a better understanding of the physical chemistry of primordial non‐equilibrium conditions is essential. Significant salt concentrations are required for the catalytic function of RNA. The separation of oligonucleotides into single strands is a difficult problem as the hydrolysis of RNA becomes a limiting factor at high temperatures. Salt concentrations modulate the melting of DNA or RNA, and its periodic modulation would enable melting and annealing cycles at low temperatures. In our experiments, a moderate temperature difference created a miniaturized water cycle, resulting in fluctuations in salt concentration, leading to melting of oligonucleotides at temperatures 20 °C below the melting temperature. This would enable the reshuffling of duplex oligonucleotides, necessary for ligation chain replication. The findings suggest an autonomous route to overcome the strand‐separation problem of non‐enzymatic replication in early evolution.     

Targeting of Single‐Stranded Oligonucleotides through Metal‐Induced Cyclization of Short Complementary Strands

A new strategy to cyclize short synthetic oligonucleotides on DNA or RNA target strands is described. The approach is based on metal‐templated cyclization of short synthetic oligonucleotides conjugated with two chelating 2,2′ : 6′,2′′‐terpyridine (Tpy) moieties at their 3′‐ and 5′‐ends. Cyclization after metal addition (Zn²⁺, Fe²⁺) was demonstrated by means of thermal‐denaturation experiments, MALDI‐Q‐TOF‐MS, and gel electrophoresis (PAGE). 1D‐ and 2D‐NMR Experiments were performed to analyze the association of complementary strands after metal‐mediated cyclization. Our protocol allows the efficient circularization of synthetic oligonucleotides. Thereby, the hybridization on a complementary strand was more efficient with an RNA target strand and a 2′‐O‐methylated circularized oligomer.     

De novo sequencing of highly modified therapeutic oligonucleotides by hydrophobic tag sequencing coupled with LC–MS

Correct sequences are prerequisite for quality control of therapeutic oligonucleotides. However, there is no definitive method available for determining sequences of highly modified therapeutic RNAs, and thereby, most of the oligonucleotides have been used clinically without direct sequence determination. In this study, we developed a novel sequencing method called ‘hydrophobic tag sequencing’. Highly modified oligonucleotides are sequenced by partially digesting oligonucleotides conjugated with a 5′‐hydrophobic tag, followed by liquid chromatography–mass spectrometry analysis. 5′‐Hydrophobic tag‐printed fragments (5′‐tag degradates) can be separated in order of their molecular masses from tag‐free oligonucleotides by reversed‐phase liquid chromatography. As models for the sequencing, the anti‐VEGF aptamer (Macugen) and the highly modified 38‐mer RNA sequences were analyzed under blind conditions. Most nucleotides were identified from the molecular weight of hydrophobic 5′‐tag degradates calculated from monoisotopic mass in simple full mass data. When monoisotopic mass could not be assigned, the nucleotide was estimated using the molecular weight of the most abundant mass. The sequences of Macugen and 38‐mer RNA perfectly matched the theoretical sequences. The hydrophobic tag sequencing worked well to obtain simple full mass data, resulting in accurate and clear sequencing. The present study provides for the first time a de novo sequencing technology for highly modified RNAs and contributes to quality control of therapeutic oligonucleotides. Copyright © 2016 John Wiley & Sons, Ltd.     

Ligating DNA with DNA

Cloning DNA typically involves the joining of target DNAs with vector constructs by enzymatic ligation. A commonly used enzyme for this reaction is bacteriophage T4 DNA ligase, which requires ATP as the energy source to catalyze the otherwise unfavorable formation of a phosphodiester bond. Using in vitro selection, we have isolated a DNA sequence that catalyzes the ligation of DNA in the absence of protein enzymes. We have used the action of two catalytic DNAs, an ATP-dependent self-adenylating deoxyribozyme (AppDNA) and a self-ligating deoxyribozyme, to create a ligation system that covalently joins oligonucleotides via the formation of a 3',5'-phosphodiester linkage. The two-step process is conducted in separate reaction vessels wherein the products of deoxyribozyme adenylation are purified before their use as substrates for deoxyribozyme ligation. The final ligation step of the deoxyribozyme-catalyzed sequence of reactions mimics the final step of the T4 DNA ligase reaction. The initial rate constant (k(obs)) of the optimized deoxyribozyme ligase was found to be 1 x 10(-)(4) min(-)(1). Under these conditions, the ligase deoxyribozyme promotes DNA ligation at least 10(5)-fold faster than that generated by a simple DNA template. The self-ligating deoxyribozyme has also been reconfigured to generate a trans-acting construct that joins separate DNA oligonucleotides of defined sequence. However, the sequence requirements of the AppDNA and that of the 3' terminus of the deoxyribozyme ligase limit the range of sequences that can be ligated.     

Isolation of novel ribozymes that ligate AMP-activated RNA substrates

Background: The protein enzymes RNA ligase and DNA ligase catalyze the ligation of nucleic acids via an adenosine-5′-5′-pyrophosphate ‘capped’ RNA or DNA intermediate. The activation of nucleic acid substrates by adenosine 5′-monophosphate (AMP) may be a vestige of ‘RNA world’ catalysis. AMP-activated ligation seems ideally suited for catalysis by ribozymes (RNA enzymes), because an RNA motif capable of tightly and specifically binding AMP has previously been isolated.Results: We used in vitro selection and directed evolution to explore the ability of ribozymes to catalyze the template-directed ligation of AMP-activated RNAs. We subjected a pool of 10¹⁵ RNA molecules, each consisting of long random sequences flanking a mutagenized adenosine triphosphate (ATP) aptamer, to ten rounds of in vitro selection, including three rounds involving mutagenic polymerase chain reaction. Selection was for the ligation of an oligonucleotide to the 5′-capped active pool RNA species. Many different ligase ribozymes were isolated; these ribozymes had rates of reaction up to 0.4 ligations per hour, corresponding to rate accelerations of ∼ 5 × 10⁵ over the templated, but otherwise uncatalyzed, background reaction rate. Three characterized ribozymes catalyzed the formation of 3′-5′-phosphodiester bonds and were highly specific for activation by AMP at the ligation site.Conclusions: The existence of a new class of ligase ribozymes is consistent with the hypothesis that the unusual mechanism of the biological ligases resulted from a conservation of mechanism during an evolutionary replacement of a primordial ribozyme ligase by a more modern protein enzyme. The newly isolated ligase ribozymes may also provide a starting point for the isolation of ribozymes that catalyze the polymerization of AMP-activated oligonucleotides or mononucleotides, which might have been the prebiotic analogs of nucleoside triphosphates.     

Oligodeoxynucleotides Containing Diastereomeric O2′,C3′‐linked Bicyclic Nucleotide Units for Functionalization of the Major Groove of Nucleic Acid Duplexes: A Summary and Novel Derivatives*

The synthesis and evaluation of a range of piperazino‐derivatized diastereomeric O2′,C3′‐linked bicyclic nucleotides are described. A new and optimized protocol is presented for the synthesis of the bicyclic scaffold on which the piperazino moiety is appended. At low salt concentration, the C2″‐S‐configured piperazino‐modified oligonucleotides display significantly enhanced hybridization affinity toward complementary DNA and RNA targets relative to the unmodified oligonucleotide control, whereas no melting transition is observed for hybrids formed with the C2″‐R‐configured piperazino‐modified oligonucleotides. Upon derivatization of the piperazino moiety with a 1‐pyrenebutanoyl group, all modified oligonucleotides display strong DNA binding and profound DNA hybridization selectivity.     

One‐Step Formation of “Chain‐Armor”‐Stabilized DNA Nanostructures

DNA‐based self‐assembled nanostructures are widely used to position organic and inorganic objects with nanoscale precision. A particular promising application of DNA structures is their usage as programmable carrier systems for targeted drug delivery. To provide DNA‐based templates that are robust against degradation at elevated temperatures, low ion concentrations, adverse pH conditions, and DNases, we built 6‐helix DNA tile tubes consisting of 24 oligonucleotides carrying alkyne groups on their 3′‐ends and azides on their 5′‐ends. By a mild click reaction, the two ends of selected oligonucleotides were covalently connected to form rings and interlocked DNA single strands, so‐called DNA catenanes. Strikingly, the structures stayed topologically intact in pure water and even after precipitation from EtOH. The structures even withstood a temperature of 95 °C when all of the 24 strands were chemically interlocked.