A Neutrophil-Inspired Supramolecular Nanogel for Magnetocaloric–Enzymatic Tandem Therapy

Neutrophils can responsively release reactive oxygen species (ROS) to actively combat infections by exogenous stimulus and cascade enzyme catalyzed bio-oxidation. A supramolecular nanogel is now used as an artificial neutrophil by enzymatic interfacial self-assembly of peptides (Fmoc-Tyr(H₂PO₃)-OH) with magnetic nanoparticles (MNPs) and electrostatic loading of chloroperoxidase (CPO). The MNPs within the nanogel can elevate H₂O₂ levels in cancer cells under programmed alternating magnetic field (AMF) similar to the neutrophil activator, and the loaded CPO within protective peptides nanolayer converts the H₂O₂ into singlet oxygen (¹O₂) in a sustained manner for neutrophil-inspired tumor therapy. As a proof of concept study, both the H₂O₂ and ¹O₂ in cancer cells increase stepwise under a programmed alternating magnetic field. An active enzyme dynamic therapy by magnetically stimulated oxygen stress and sustained enzyme bio-oxidation is thus shown with studies on both cells and animals.     

An efficient synthesis and cytotoxic activity of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole obtained using a magnetically recyclable Fe3O4 nanocatalyst‐mediated white tea extract

A simple and efficient procedure has been developed for the synthesis of biologically relevant 2‐substituted benzimidazoles through a one‐pot condensation of o‐phenylenediamines with aryl aldehydes catalysed by iron oxide magnetic nanoparticles (Fe₃O₄ MNPs) in short reaction times with excellent yields. In the present study, Fe₃O₄ MNPs synthesized in a green manner using aqueous extract of white tea (Camelia sinensis) (Wt‐Fe₃O₄ MNPs) were applied as a magnetically separable heterogeneous nanocatalyst to synthesize 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole which has potential application in pharmacology and biological systems. Fourier transform infrared and NMR spectroscopies were used to characterize the 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole. In vitro cytotoxicity studies on MOLT‐4 cells showed a dose‐dependent toxicity with non‐toxic effect of 2‐(4‐chlorophenyl)‐1H–benzo[d]imidazole, up to a concentration of 0.147 µM. The green synthesized Wt‐Fe₃O₄ MNPs as recyclable nanocatalyst could be used for further research on the synthesis of therapeutic materials, particularly in nanomedicine, to assist in the treatment of cancer.     

General Protocol for the Synthesis of Functionalized Magnetic Nanoparticles for Magnetic Resonance Imaging from Protected Metal–Organic Precursors

The development of magnetic nanoparticles (MNPs) with functional groups has been intensively pursued in recent years. Herein, a simple, versatile, and cost‐effective strategy to synthesize water‐soluble and amino‐functionalized MNPs, based on the thermal decomposition of phthalimide‐protected metal–organic precursors followed by deprotection, was developed. The resulting amino‐functionalized Fe₃O₄, MnFe₂O₄, and Mn₃O₄ MNPs with particle sizes of about 14.3, 7.5, and 6.6 nm, respectively, had narrow size distributions and good dispersibility in water. These MNPs also exhibited high magnetism and relaxivities of r₂=107.25 mM^?1 s^?1 for Fe₃O₄, r₂=245.75 mM^?1 s^?1 for MnFe₂O₄, and r₁=2.74 mM^?1 s^?1 for Mn₃O₄. The amino‐functionalized MNPs were further conjugated with a fluorescent dye (rhodamine B) and a targeting ligand (folic acid: FA) and used as multifunctional probes. Magnetic resonance imaging and flow‐cytometric studies showed that these probes could specifically target cancer cells overexpressing FA receptors. This new protocol opens a new way for the synthesis and design of water‐soluble and amino‐functionalized MNPs by an easy and versatile route.     

Electrochemical Conversion of Magnetic Nanoparticles Using Disposable Working Electrode in a 3D‐Printed Electrochemical Cell

Exploration of new property/function of nanomaterials is always a strong impetus in the nanoscience field. Here, a new method of electrochemical conversion (ECC) of magnetic nanoparticles (MNPs) is proposed to endow MNPs with signal generation ability for sensing. Briefly, high potential was applied to split H₂O to generate acid, while Fe₃O₄ MNPs reacted with H⁺ and produce ferric/ferrous ions, which further reacted with K₄Fe(CN)₆ to yield Prussian blue (PB) through potential cycling. The ECC method worked well on both home‐made and commercial MNPs with different sizes. The generated PB possessed strong electrochemical activity for further applications. Interestingly, an uneven deposition of PB on working electrode and undesired contamination of the reference and counter electrodes were found when using commercial integrated three‐electrode chip. A 3D‐printed electrochemical cell was designed to facilitate the ECC and avoid drawbacks of commercial integrated electrode. The 3D‐printed electrochemical cell was proven to solve the problem above through spatial separation of electrodes and thus facilitated the ECC process. An electrochemical sensor for H₂O₂ detection based on the catalysis ability of ECC‐based PB exhibited a linear response from 5 μM to 1 mM, a high sensitivity of 269 μA mM^?1 cm^?2 and a low detection limit of 0.16 μM (S/N=3), which suggests its promising application prospect in electrochemistry‐related analysis.     

Reactivity of Tyr–Leu and Leu–Tyr dipeptides: identification of oxidation products by liquid chromatography–tandem mass spectrometry

The exposure of peptides and proteins to reactive hydroxyl radicals results in covalent modifications of amino acid side‐chains and protein backbone. In this study we have investigated the oxidation the isomeric peptides tyrosine–leucine (YL) and leucine–tyrosine (LY), by the hydroxyl radical formed under Fenton reaction (Fe²⁺/H₂O₂). Through mass spectrometry (MS), high‐performance liquid chromatography (HPLC‐MS) and electrospray tandem mass spectrometry (HPLC‐MSⁿ) measurements, we have identified and characterized the oxidation products of these two dipeptides. This approach allowed observing and identifying a wide variety of oxidation products, including isomeric forms of the oxidized dipeptides. We detected oxidation products with 1, 2, 3 and 4 oxygen atoms for both peptides; however, oxidation products with 5 oxygen atoms were only present in LY. LY dipeptide oxidation leads to more isomers with 1 and 2 oxygen atoms than YL (3 vs 5 and 4 vs 5, respectively). Formation of the peroxy group occurred preferentially in the C‐terminal residue. We have also detected oxidation products with double bonds or keto groups, dimers (YL–YL and LY–LY) and other products as a result of cross‐linking. Both amino acids in the dipeptides were oxidized although the peptides showed different oxidation products. Also, amino acid residues have shown different oxidation products depending on the relative position on the dipeptide. Results suggest that amino acids in the C‐terminal position are more prone to oxidation. Copyright © 2009 John Wiley & Sons, Ltd.     

A Novel Synthesis and Antioxidant Evaluation of Functionalized [1,3]‐Oxazoles Using Fe3O4‐Magnetic Nanoparticles

In this research, green procedure was employed for biosynthesis of magnetic nanoparticles of iron oxide (Fe₃O₄‐MNPs) by reduction of ferric chloride solution with Orange peel water extract. Also, dihydro‐2H‐cyclopenta[d][1,3]oxazole was generated through multicomponent reaction of 1,3‐oxazole‐2(3H)‐thione, dialkyl acetylenedicarboxylates, α‐haloketones, and Fe₃O₄‐MNPs as catalyst at ambient temperature in good yield. Initially, 1,3‐oxazole‐2(3H)‐thione derivatives as one of the precursors are produced through the reaction of alkyl bromides, isothiocyanate, sodium hydride, and Fe₃O₄‐MNPs as catalyst water at ambient temperature in 83–95% yields. Also, diphenyl‐picrylhydrazine radical trapping and ferric reduction activity potential assays are used for evaluation of antioxidant activity of some synthesized compounds. Among investigated compounds, 4b has good power for radical trapping activity and 4d has good reduction power to butylated hydroxytoluene and 2‐tert‐butylhydroquinone.     

Synthesis,characterization, and catalytic application of Fe3O4‐Si‐[CH2]3‐N=CH‐aryl for the efficient synthesis of novel poly‐substituted pyridines

Fe₃O₄ magnetic nanoparticles (MNPs) were functionalized by aminopropylsilane and reacted with aromatic aldehyde, and Fe₃O₄‐Si‐[CH₂]₃‐N=CH‐Aryl and Fe₃O₄‐Si‐(CH₂)₃‐NH‐CH₂‐Aryl MNPs were prepared as novel magnetic nanocatalysts. Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), and scanning and transmission electron microscopy (SEM and TEM) were used to identify the MNPs. The catalytic activity of the MNPs was evaluated in the one‐pot synthesis of some novel poly‐substituted pyridine derivatives.     

Protease Immobilization on γ‐Fe2O3/Fe3O4 Magnetic Nanoparticles for the Synthesis of Oligopeptides in Organic Solvents

The use of nanobiocatalysts, with the combination of nanotechnology and biotechnology, is considered as an exciting and rapidly emerging area. The use of iron oxide magnetic nanoparticles, as enzyme immobilization carriers, has drawn great attention because of their unique properties, such as controllable particle size, large surface area, modifiable surface, and easy recovery. In this study, various γ‐Fe₂O₃/Fe₃O₄ magnetic nanoparticles with immobilized proteases were successfully prepared by three different immobilization strategies including A) direct binding, B) with thiophene as a linker, and C) with triazole as a linker. The oligopeptides syntheses catalyzed by these magnetic nanoparticles (MNPs) with immobilized proteases were systematically studied. Our results show that i) for magnetic nanoparticles immobilized α‐chymotrypsin, both immobilization strategies A and B furnished good reusability for the Z‐Tyr‐Gly‐Gly‐OEt synthesis, the MNPs enzymes can be readily used at least five times without significant loss of its catalytic performance: ii) In the case of Z‐Asp‐Phe‐OMe synthesis catalyzed by magnetic nanoparticles immobilized thermolysin, immobilization Strategy B provided the best recyclability: iii) For the immobilized papain, although Strategy A or B afforded an immobilized enzyme for the first cycle of Z‐Ala‐Leu‐NHNHPh synthesis in good yield, their subsequent catalytic activity decreased rapidly. In general, the γ‐Fe₂O₃ MNPs were better for use as an immobilization matrix, rather than the Fe₃O₄ MNPs, owing to their smaller particle size and higher surface area.     

Fuel‐Free Bio‐photoelectrochemical Cells Based on a Water/Oxygen Circulation System with a Ni:FeOOH/BiVO4 Photoanode

A bio‐photoelectrochemical cell (BPEC) based on a fuel‐free self‐circulation water–oxygen–water system was fabricated. It consists of Ni:FeOOH modified n‐type bismuth vanadate (BiVO₄) photoanode and laccase catalyzed biocathode. In this BPEC, irradiation of the photoanode generates photocurrent for photo‐oxidation of water to oxygen, which is reduced to water again at the laccase biocathode. Of note, the by‐products of two electrode reactions could continue to be reacted, which means the H₂O and O₂ molecules are retained in an infinite loop of water–oxygen–water without any sacrificial chemical components. As a result, the assembled fuel‐free BPEC exhibits good performance with an open‐circuit potential of 0.97 V and a maximum power density of 205 μW cm^?2 at 0.44 V. This BPEC based on a self‐circulation system offers a fuel‐free model to enhance multiple energy conversion and application in reality.     

Highly Productive Oxidative Biocatalysis in Continuous Flow by Enhancing the Aqueous Equilibrium Solubility of Oxygen

We report a simple, mild, and synthetically clean approach to accelerate the rate of enzymatic oxidation reactions by a factor of up to 100 when compared to conventional batch gas/liquid systems. Biocatalytic decomposition of H₂O₂ is used to produce a soluble source of O₂ directly in reaction media, thereby enabling the concentration of aqueous O₂ to be increased beyond equilibrium solubility under safe and practical conditions. To best exploit this method, a novel flow reactor was developed to maximize productivity (g product L^?1 h^?1). This scalable benchtop method provides a distinct advantage over conventional bio‐oxidation in that no pressurized gas or specialist equipment is employed. The method is general across different oxidase enzymes and compatible with a variety of functional groups. These results culminate in record space‐time yields for bio‐oxidation.     

Redox‐Polymer‐Based High‐Current‐Density Gas‐Diffusion H2‐Oxidation Bioanode Using [FeFe] Hydrogenase from Desulfovibrio desulfuricans in a Membrane‐free Biofuel Cell

The incorporation of highly active but also highly sensitive catalysts (e.g. the [FeFe] hydrogenase from Desulfovibrio desulfuricans) in biofuel cells is still one of the major challenges in sustainable energy conversion. We report the fabrication of a dual‐gas diffusion electrode H₂/O₂ biofuel cell equipped with a [FeFe] hydrogenase/redox polymer‐based high‐current‐density H₂‐oxidation bioanode. The bioanodes show benchmark current densities of around 14 mA cm^?2 and the corresponding fuel cell tests exhibit a benchmark for a hydrogenase/redox polymer‐based biofuel cell with outstanding power densities of 5.4 mW cm^?2 at 0.7 V cell voltage. Furthermore, the highly sensitive [FeFe] hydrogenase is protected against oxygen damage by the redox polymer and can function under 5 % O₂.     

Enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives by Fe3O4@PS‐arginine as an efficient chiral magnetic nanocatalyst

A novel chiral magnetic nanocatalyst was prepared by the surface modification of Fe₃O₄ magnetic nanoparticles (MNPs) with a chloropropylsilane and further by arginine to form Fe₃O₄@propylsilan‐arginine (Fe₃O₄@PS‐Arg). After the structural confirmation of Fe₃O₄@PS‐Arg synthesized MNPs by Fourier transform‐infrared, X‐ray diffraction, field emission‐scanning electron microscopy, transmission electron microscopy, vibrating‐sample magnetometry and thermogravimetric analyses, their catalytic activity was evaluated for one‐pot enantioselective synthesis of 3‐amino‐1‐aryl‐1H‐benzo[f]chromene‐2‐carbonitrile derivatives. The results showed that in the presence of 0.07 g Fe₃O₄@PS‐Arg nanocatalyst and ethanol as solvent, the best reaction yield (96%) was obtained in the least time (5 min). Easy operation, reusability and stability, short reaction time, high reaction yields and good enantioselectivity are the major advantages of the newly synthesized nanocatalyst. Also, this study provides a novel strategy for further research and investigation on the synthesis of new reusable enantioselective catalysts and chiral compounds.     

Sensitive and Selective Sensing of Hydrogen Peroxide with Iron‐Tetrasulfophthalocyanine‐Graphene‐Nafion Modified Screen‐Printed Electrode

We developed a novel iron‐tetrasulfophthalocyanine‐graphene‐Nafion (FeTSPc‐GR‐Nafion) modified screen‐printed electrode to determine hydrogen peroxide (H₂O₂) with high sensitivity and selectivity. The nanocomposite film (FeTSPc‐GR‐Nafion) exhibits an excellent electrocatalytic activity towards oxidation of H₂O₂ at a potential of +0.35 V in the absence of enzyme. A comparative study reveals that the FeTSPc‐GR complexes play a dual amplification role. Amperometric experiment indicates that the sensors possess good sensitivity and selectivity, with a linear range from 2.0×10^?7 M to 5.0×10^?3 M and a detection limit of 8.0×10^?8 M. This sensor has been successfully used to develop the glucose biosensor and has also been applied to determine H₂O₂ in sterile water.     

Understanding LiOH Chemistry in a Ruthenium‐Catalyzed Li–O2 Battery

Non‐aqueous Li–O₂ batteries are promising for next‐generation energy storage. New battery chemistries based on LiOH, rather than Li₂O₂, have been recently reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, the focus is on the mechanism of Ru‐catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements, and mass spectrometry, it is shown that on discharging LiOH forms via a 4 e⁻ oxygen reduction reaction, the H in LiOH coming solely from added H₂O and the O from both O₂ and H₂O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li₂O₂, LiOH formation over Ru incurs few side reactions, a critical advantage for developing a long‐lived battery. An optimized metal‐catalyst–electrolyte couple needs to be sought that aids LiOH oxidation and is stable towards attack by hydroxyl radicals.     

6‐TIPS‐β‐Cyclodextrin‐Modified Fe3O4 for Facile Enantioseparation of 1‐(1‐Naphthyl)ethylamine

A new type of chiral magnetic nanoparticle was prepared from covalently linked magnetic nanoparticles (Fe₃O₄) and heptakis‐(6‐O‐triisopropylsilyl)‐β‐cyclodextrin (6‐TIPS‐β‐CD). The resulting selectors (TIPS‐β‐CD‐MNPs) combined the good magnetic properties Fe₃O₄ and efficient chiral recognition ability of 6‐TIPS‐β‐CD. The enantioselectivity of TIPS‐β‐CD‐MNPs towards 1‐(1‐naphthyl)ethylamine was six times higher than that of the parent β‐CD modified Fe₃O₄ particles.     

A Biofuel Cell Based on Biocatalytic Reactions of Glucose on Both Anode and Cathode Electrodes

Biofuel cells based on electrocatalytic oxidation of NADH and reduction of H₂O₂ have been prepared using carbon fiber electrodes functionalized with graphene nano‐flakes. The electrochemical oxidation of NADH was catalyzed by Meldola's blue (MB), while the reduction of H₂O₂ was catalyzed by hemin, both catalysts were adsorbed on the graphene flakes due to their π‐π staking. In the next set of experiments, the MB‐ and hemin‐electrodes were additionally modified with glucose dehydrogenase (GDH) and glucose oxidase (GOx), respectively. The enzyme catalyzed reactions in the presence of glucose, NAD⁺ and O₂ resulted in the production of NADH and H₂O₂ in situ. The produced NADH and H₂O₂ were oxidized and reduced, respectively, at the bioelectrocatalytic electrodes, thus producing voltage and current generated by the biofuel cell. The enzyme‐based biofuel cells operated in a human serum solution modelling an implantable device powered from the natural biofluid. Finally, two enzyme‐based biofuel cell connected in series and operating in the serum solution produced electrical power sufficient for activation of an electronic watch used as an example device.     

A Simple Electrochemical Approach Based on Inexpensive Wall‐Jet Screen‐Printed Ring Disk Electrode to Evaluate Oxygen Reduction Catalysts

A simple electrochemical approach to evaluate oxygen reduction catalysts using an inexpensive screen‐printed ring disk carbon electrode system, consisting of a ring electrode deposited with MnO₂ and a disk electrode modified with the catalysts for study, is developed in this study. The as‐prepared MnO₂ is selective and sensitive for H₂O₂ oxidation in the presence of O₂ and is crucial to the proposed approach. By coupling with a wall‐jet electrochemical cell, the product generated from the reduction reaction at the disk electrode can effectively be monitored at the MnO₂‐deposited ring electrode. Model catalysts of nano‐Au and nano‐Pd representing 2e^? reduction of O₂ to H₂O₂ and 4e^? reduction to H₂O, respectively, were evaluated as electrode materials in oxygen reduction reaction to demonstrate the applicability of the proposed method.     

Carbon‐Nanotube‐Supported Bio‐Inspired Nickel Catalyst and Its Integration in Hybrid Hydrogen/Air Fuel Cells

A biomimetic nickel bis‐diphosphine complex incorporating the amino acid arginine in the outer coordination sphere was immobilized on modified carbon nanotubes (CNTs) through electrostatic interactions. The functionalized redox nanomaterial exhibits reversible electrocatalytic activity for the H₂/2 H⁺ interconversion from pH 0 to 9, with catalytic preference for H₂ oxidation at all pH values. The high activity of the complex over a wide pH range allows us to integrate this bio‐inspired nanomaterial either in an enzymatic fuel cell together with a multicopper oxidase at the cathode, or in a proton exchange membrane fuel cell (PEMFC) using Pt/C at the cathode. The Ni‐based PEMFC reaches 14 mW cm⁻², only six‐times‐less as compared to full‐Pt conventional PEMFC. The Pt‐free enzyme‐based fuel cell delivers ≈2 mW cm⁻², a new efficiency record for a hydrogen biofuel cell with base metal catalysts.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

Enzyme‐Inspired Room‐Temperature Lithium–Oxygen Chemistry via Reversible Cleavage and Formation of Dioxygen Bonds

Li‐O₂ batteries are promising energy storage systems due to their ultra‐high theoretical capacity. However, most Li‐O₂ batteries are based on the reduction/oxidation of Li₂O₂ and involve highly reactive superoxide and peroxide species that would cause serious degradation of cathodes, especially carbon‐based materials. It is important to explore lithium‐oxygen reactions and find new Li‐O₂ chemistry which can restrict or even avoid the negative influence of superoxide/peroxide species. Here, inspired by enzyme‐catalyzed oxygen reduction/oxidation reactions, we introduce a copper(I) complex 3 N‐Cu^I (3 N=1,4,7‐trimethyl‐1,4,7‐triazacyclononane) to Li‐O₂ batteries and successfully modulate the reaction pathway to a moderate one on reversible cleavage/formation of O?O bonds. This work demonstrates that the reaction pathways of Li‐O₂ batteries could be modulated by introducing an appropriate soluble catalyst, which is another powerful choice to construct better Li‐O₂ batteries.