Synthesis of Amido- and Diamidophosphites with Polyfluoroalkyl Substituents

Bis(polyfluoroalkyl) chlorophosphites and polyfluoroalkyl dichlorophosphites react easily with secondary amines (from –40 to –22°C, 1–3 h, CH2Cl2) in the presence or absence of triethylamine to form the corresponding bis(polyfluoroalkyl) diorganylamidophosphites or bis(diorganylamido) polyfluoroalkyl phosphites in the yield of up to 74%. Bis(polyfluoroalkyl) diorganylamidophosphites were also synthesized from diorganylamidodichlorophosphites and polyfluoroalkanols (–25 to –22°C, 2 h, Et3N–CH2Cl2) with a yield of 56–60%.     

Reaction of polyfluoroalkyl dichlorophosphites with propargyl alcohol: synthesis and isomerization of polyfluoroalkyl di(2-propynyl) phosphites

Russian Chemical Bulletin - Polyfluoroalkyl dichlorophosphites reacted with propargyl alcohol in Et3N/hexane to give di(2-propynyl) polyfluoroalkyl phosphites, which are transformed into...     

Esterification activity and stability of Candida rugosa lipase immobilized into chitosan

Microbial lipase from Candida rugosa immobilized into porous chitosan beads was tested for esterification selectivity with butanol and different organic acids (C2–C12), and butyric acid and different aliphatic alcohols (C2–C10). After 24 h, the acids tested achieved conversions of about 40–45%. Acetic acid was the only exception, and in this case butanol was not consumed. Different alcohols led to butyric acid conversions >40%, except for ethanol, in which case butyric acid was converted only 26%. The system’s butanol and butyric acid were selected for a detailed study by employing an experimental design. The influence of temperature, initial catalyst concentration, and acid:alcohol molar ratio on the formation of butyl butyrate was simultaneously investigated, employing a 2³ full factorial design. The range studied was 37–50°C for temperature (X₁), 1.25–2.5% (w/v) for the catalyst concentration (X₂), and 1 and 2 for the acid:alcohol molar ratio (X₃). Catalyst concentration (X₂) was found to be the most significant factor and its influence was positive. Maximum ester yield (83%) could be obtained when working at the lowest level for temperature (37°C), highest level for lipase concentration (2.5% [w/v]), and center level of acid:alcohol molar ratio (1.5). The immobilized lipase was also used repeatedly in batch esterification reactions of butanol with butyric acid, revealing a half-life of 86 h.     

Oxidation of brown coal of Angren deposit with a mixture of nitric and sulfuric acids

Oxidation of brown coal of Angren deposits by a mixture of nitric and sulfuric acids was studied in respect of dependence on the concentration of nitric acid (5–30%), concentration of sulfuric acid in nitric acid solution (2.5–20%), and temperature (40–80°C) at the process duration 2 h and the ratio of coal: HNO₃ = 1: 2. Optimal conditions of the process in terms of maximum yield of humic acids and the minimum loss of nitrogen oxides were found.     

An efficient and regioselective synthesis of 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-5-(trihalomethyl)-1H-pyrazoles] from 4-alkoxy-1,1,1-trihaloalk-3-en-2-ones

Abstract  

This work describes the regioselective synthesis of two new series of 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-4,5-dihydro-5-hydroxy-5-(trihalomethyl)-1H-pyrazoles], where the 3-substituents are H, Me, C₆H₅, 4-FC₆H₄, 4-ClC₆H₄, 4-BrC₆H₄, 4-NO₂C₆H₄, 4,4′-BiPh, and 2-furyl, in a one-pot methodology with ethanol as solvent, from the reaction of 4-alkoxy-4-(alkyl/aryl/heteroaryl)-1,1,1-trihaloalk-3-en-2-ones with oxalyldihydrazide (51–89%). Complementarily, the dehydration reactions of five examples of the described oxalylbispyrazolines are also reported, which furnished the respective 1,1′-oxalylbis[3-(alkyl/aryl/heteroaryl)-5-(trihalomethyl)-1H-pyrazoles] in 53–78% yields without the two C(O)–N bond cleavages.     

New synthesis of diselenophosphinates of heavy metals

The four-component reaction between secondary phosphines R₂PH (R = arylalkyl, hetarylalkyl), elemental selenium, diethylamine, and heavy metal acetates M(OAc) _n (M = Ni, Zn, Cd, Sn, Hg, Pb, Bi) proceeds under mild conditions (22–55°C, 0.5 h, EtOH) with the formation of the corresponding diselenophosphinates M(Se₂PR₂) _n in 55–90% yield.     

Exchange reactions of tetrathiophosphates with thiophosphoryl chloride

Exchange reactions of tetrathiophosphates with thiophosphoryl chloride were studied. The exchange of thiol groups between compounds with tetracoordinated phosphorus centers proceeds at 150–220°C and results in the formation of dialkyl trithiochlorophosphates and alkyl(aryl) dithiodichlorophosphates or their mixtures depending on the ratio of the reagents. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1815–1817, September, 1998.     

Reaction of aryl(diarylphosphoryl)methanols with alkyl propiolates. Regio- and stereoselective synthesis of functional vinyl ethers

Aryl(diarylphosphoryl)methanols reacted with alkyl propiolates under mild conditions (triethylamine, THF, 22?25°C), to give the corresponding anti-Markovnikov adducts, alkyl (E)-3-[aryl(diarylphosphoryl) methoxy]prop-2-enoates, with high yields (84–90%) and regio- and stereoselectivity.     

Enzymatic synthesis of medium-chain triglycerides in a solvent-free system

The synthesis of tricaprylin, tricaprin, trilaurin, and trimyristin in a solvent-freesystem was conducted by mixing a commercial immobilized lipase (Lipozyme IM 20, Novo Nordisk, Bagsvaerd, Denmark) with the organic reactants (glycerol and fatty acids) in a 20-mL batch reactor with constant stirring. In a first set of experiments, the effect of water concentration (0–6%) on the reaction conversion was shown to be negligible. In a second set of experiments, the effects of temperature (70–90°C), fatty acid/glycerol molar ratio (1–5), and enzyme concentration (1–9%[w/w]) on the reaction conversion were determined by the application of a 3×3 experimental design. The reactions were carried out for 26 h and the nonpolar phase was analyzed by gas chromatography (GC). Appreciable levels of medium-chain triglycerides were achieved, except for tricaprylin. For the triglyceride production, higher selectivity was attained under the following conditions: molar ratio of 5, enzyme concentration of 5 or 9% (w/w) and temperatures of 70°C (Tricaprin), 80°C (trilaurin), and 90°C (trimyristin). Statistical analysis indicated that the fatty acid/glycerol molar ratio was the most significant variable affecting the synthesis of triglycerides.     

Isolation of Cyclodextrin Producing Thermotolerant Paenibacillus sp. from Waste of Starch Factory and Some Properties of the Cyclodextrin Glycosyltransferase

A Cyclodextrin (CDs) producing bacteria was isolated from waste of starch factory in Thailand and identified as Bacillus circulans by biochemical characterization and Paenibacillus sp. by 16S rRNA. The Paenibacillus grew and produced cyclodextrin glycosyltransferase (CGTase) at temperature range 37–45 °C. The optimum culturing conditions for highest CD-forming activity were pH 10.0 and 40 °C for 72 h in Horikoshi broth containing 0.5% soluble starch. The CGTase was partially purified by starch absorption, with 64% recovery and purification fold of 27. The optimum temperatures for dextrinizing and CD-forming activity were 70 and 50–55 °C. At the optimum temperature, the optimum pH for dextrinizing activity was 6.0, while CD-forming activity was 7.0. When the enzyme was incubated for 1 h at different temperatures, CD-forming activity retained its full activity up to 70 °C while dextrinizing activity dropped to 60%. Cyclodextrin products analyzed by HPLC was α:β=1:1, temperature of reaction mixture can affect the yield of CDs.     

The use of sulfated tin oxide as solid superacid catalyst for heterogeneous transesterification of <Emphasis Type="Italic">Jatropha curcas</Emphasis> oil

This work presents the use of sulfated tin oxide enhanced with SiO₂ (SO₄²⁻/SnO₂-SiO₂) as a superacid solid catalyst to produce methyl esters from Jatropha curcas oil. The study was conducted using the design of experiment (DoE), specifically a response surface methodology based on a threevariable central composite design (CCD) with α = 2. The reaction parameters in the parametric study were: reaction temperature (60°C to 180°C), reaction period (1 h to 3 h), and methanol to oil mole ratio (1: 6 to 1: 24). Production of the esters was conducted using an autoclave nitrogen pressurized reactor equipped with a thermocouple and a magnetic stirrer. The maximum methyl esters yield of 97 mass % was obtained at the reaction conditions: temperature of 180°C, reaction period of 2 h, and methanol to oil mole ratio of 1: 15. The catalyst amount and agitation speed were fixed to 3 mass % and 350–360 min⁻¹, respectively. Properties of the methyl esters obtained fell within the recommended biodiesel standards such as ASTM D6751 (ASTM, 2003).     

Reaction kinetics of stover liquefaction in recycled stover polyol

The purpose of this research was to study the kinetics of liquefaction of crop residues. The liquefaction of corn stover in the presence of ethylene glycol and ethylene carbonate using sulfuric acid as a catalyst was studied. It was found that the liquefaction yield was a function of ratio of solvent to corn stover, temperature, residence time, and amount of catalyst. Liquefaction of corn stover was conducted over a range of conditions encompassing residence times of 0–2.5 h, temperatures of 150–170°C, sulfuric acid concentrations of 2–4% (w/w), and liquefaction reagent/corn stover ratio of 1–3. The liquefaction rate constants for individual sets of conditions were examined using a first-order reaction model. Rate constant increased with the increasing of liquefaction temperature, catalyst content, and liquefaction reagent/corn stover ratio. Reuse of liquefied biomass as liquefying agent was also evaluated. When using recycled liquefied biomass instead of fresh liquefaction reagent, the conversion is reduced. It appeared that 82% of liquefaction yield was achieved after two times of reuse.     

Reaction of divinyl telluride with secondary phosphine chalcogenides

Divinyl telluride reacted with 2 equiv of diphenylphosphine sulfide in the presence of AIBN as radical initiator (63–68°C) to give the corresponding anti-Markovnikov adduct in 68% yield with high regioselectivity. Treatment of the addition product with aqueous hydrogen peroxide at room temperature afforded 71% of vinyldiphenylphosphine oxide. Radical addition of diphenylphosphine selenide to divinyl telluride (AIBN, 63–68°C) led to the formation of 1,1,3,3-tetraphenyldiphosphoxane 1,3-diselenide in 82% yield.     

1-( p -Fluorophenyl)-2-(2′-pyridyl)ethanol and 1-( p -fluorophenyl)-2-(2′-pyridyl)ethene obtained from the condensation reaction of 2-picoline and p -fluorophenylaldehyde under catalyst-and solvent-free conditions

The novel intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol or 2-[2′-(1-hydroxy-1-(p-fluorophenyl)ethyl]pyridine and the corresponding novel dehydration compound 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene or 2-[p-fluorophenylvinyl]pyridine were obtained from the condensation reaction of p-fluorophenylaldehyde and 2-picoline under catalyst-and solvent-free conditions. The intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol was obtained at 42 h reaction time and temperature of 120°C, respectively. ¹H-NMR, IR spectroscopic data of the 1-(p-fluorophenyl)-2-(2-pyridyl)ethanol clearly showed the presence of the-CH₂-CHOH-group. The compound was obtained as a white powder with m.p. 121–122°C and a yield of 8%. For 1-(p-fluorophenyl)-2-(2-pyridyl)ethene, the reaction conditions were similar, but the reaction temperature was increased to yield the double bond in the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene. At the reaction temperature of 140°C, the compound was a slightly brown powder with a m.p. of 78°C and yield of 18%. ¹H-NMR, IR spectroscopic data for the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene showed the presence of a double bond in trans configuration (-CH=CH-), characteristic of a styrylpyridine.     

Anaerobic treatment of animal byproducts from slaughterhouses at laboratory and pilot scale

Different mixtures of animal byproducts, other slaughterhouse waste (i.e., rumen, stomach and intestinal content), food waste, and liquid manure were codigested at mesophilic conditions (37°C) at laboratory and pilot scale. Animal byproducts, including blood, represent 70–80% of the total biogas potential from waste generated during slaughter of animals. The total biogas potential from waste generated during slaughter is about 1300 MJ/cattle and about 140 MI/pig. Fed-batch digestion of pasteurized (70°C, 1h) animal byproducts resulted in a fourfold increase in biogas yield (1.14L/g of volatile solids [VS]) compared with nonpasteurized animal bypproducts (0.31L/g of VS). Mixtures with animal byproducts representing 19–38% of the total dry matter were digested in continuous-flow stirred tank reactors at laboratory and pilot scale. Stable processes at organic loading rates (OLRs) exceeding 2.5g of VS/(L·d) and hydraulic retention times (HRTs) less than 40 d could be obtained with total ammonia nitrogen concentrations (NH₄−N+NH₃−N) in the range of 4.0–5.0 g/L. After operating one process for more than 1.5 yr at total ammonia nitrogen concentrations >4 g/L, an increase in OLR to 5 g of VS/(L·d) and a decrease in HRT to 22 d was possible without accumulation of volatile fatty acids.     

A New Route to Some Novel Phosphole Derivatives

Abstract

Previous work has shown that the unstable five co-ordinate phospholes (1; R=alkoxy, R′=alkyl) produced in the reaction of trialkyl phosphites with a two molar equivalent of dimethyl acetylenedicarboxylate can be converted into the novel phospholes (2; R=alkoxy) by treatment with hydrogen bromide at low temperature. We have now shown that a similar approach can be used to generate the phospholes (2; R=alkyl, aryl) by using dialkyl alkylphosphonites or dialkyl arylphosphonites rather than trialkyl phosphites. However, the reduced stability of the phosphorane intermediates (1; R=alkyl, aryl, R′=alkyl) relative to those produced in the trialkyl phosphite reactions means that these trapping reactions are difficult to carry out successfully.     

Synthesis of Some Mixed Dialkyl Phosphites and their Use as Forerunners for Potential Chiral Phosphates

Abstract

Organophosphorus compounds containing a c h i d ccntrc at the P atom are of considerable interest fiom a stcreochemical point of view. Accordingly, trialkyl phosphates (RO)(RIO)(R20)P(0) (4) were synthesized starting from dialkyl phosphites. Thus: direct hydrolysis of dialkyl phosphites (ROhP(0)H (1) with tetraethylammonium hydroxide (20% aqueous solution), followed by extraction with dichloromethane affords the corresponding tetraethylammonium alkyl hydrogen phosphitcs (2). Good yields (q) of mixed dialkyl phosphites (3) were obtained on heating stoichiometric amounts of (2) and alkyl iodides in acetonitrile solution at 6O°C, for 6 hrs. Mixed dialkyl phosphites (3) were used in synthesis of some trialkyl phosphates (4) by PTC (see scheme).     

GC-FID optimization and validation for determination of 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxyamphetamine and methamphetamine in ecstasy tablets

A methodology for the determination of 3,4-methylenedioxymethamphetamine (MDMA), 3,4-methylenedioxyamphetamine (MDA) and methamphetamine (MA) in seized tablets using gas chromatography with a flame ionization detector (GC-FID) is described. The chromatographic conditions, i.e. gas flow rates and temperatures for the column, injector and detector were optimized. The optimum chromatographic conditions were as follows: a CP-SIL 24 CB WCOT fused silica capillary column (30 m × 0.32 mm I.D., 0.25 μm film thickness), N₂ carrier gas flowing at 2.6 mL/min, injector temperature at 290°C and detector temperature at 300°C. The oven temperature was ramped from 80°C at a rate of 20°C/min to final temperature of 270°C (1 min). All analytes were well separated within 7 min with an analysis time of 10.5 min. Calibration curves were linear over the concentration ranges of 3.125–200 μg/mL for MDMA and 6.25–200 μg/mL for MDA and MA (r > 0.990). The intra- and inter-day precisions for determining all analytes were 2.32–10.38% RSD and 1.15–9.77% RSD, respectively. The intra- and inter-day accuracies ranged from −19.79 to +17.51% DEV and −6.84 to +5.2% DEV, respectively. The lower limits of quantification (LLOQs) were 3.125 μg/mL for MDMA and 6.25 μg/mL for MDA and MA. All analytes were stable at room temperature during 24 h but significant loss occurred after 2-month storage at −20°C. The method was shown to be useful for determining the purity of MDMA in seized tablets.     

Optimizing ammonia pressurization/depressurization processing conditions to enhance enzymatic susceptibility of dwarf elephant grass

An ammonia pressurization/depressurization process was investigated to evaluate the potential of producing reducing sugars from dwarf elephant grass, a warm-season forage. Moisture, temperature, and ammonia loading affected sugar yield (p<0.0001). At optimal conditions, ammonia processing solubilized 50.9% of the hemicellulose and raised the sugar yield (percentage of theoretical) from 18 to 83%. Glucose and xylose production were increased 3.2-and 8.2-fold, respectively. The mild processing conditions of the ammonia treatment (90–100°C, 5 min), the low enzyme loading (2 international filter paper units/g), and the short hydrolysis time (24 h), greatly enhance the potential of using for ages to produce sugars valuable for several applications.     

Addition of polyfluoroalkyl iodides to allyl glycidyl ether

Addition of polyfluoroalkyl iodides to the double bond of allyl glycidyl ether occurred under mild conditions (20–25 °C, MeCN/H₂O, Na₂S₂O₄, NaHCO₃) with retention of the oxirane ring. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1476–1478, August, 2007.