Aggregation‐Induced Emission with Long‐Lived Room‐Temperature Phosphorescence from Methylene‐Linked Organic Donor–Acceptor Structures

Aggregation‐caused quenching (ACQ), where excited‐state and/or ground‐state electronic structures are altered to exhibit an increased proclivity for non‐radiative decay for the aggregates, is largely responsible for the lack of fluorescence and phosphorescence in molecular solids in general. Here we show that ACQ could be effectively circumvented by constructing an aromatic system with a methylene‐linker, where the system exhibits typical aggregation‐induced emission (AIE) with long‐lived room‐temperature phosphorescence, since the tetrahedral structure in the solid state may significantly reduce strong intermolecular interactions contributing to ACQ.     

An Unexpected Chromophore–Solvent Reaction Leads to Bicomponent Aggregation-Induced Phosphorescence

Organic luminogens with persistent room-temperature phosphorescence (RTP) have found a wide range of applications. However, many RTP luminogens are prone to severe quenching in the crystalline state. Herein, we report a strategy to construct a donor-sp³-acceptor type luminogen that exhibits aggregation-induced emission (AIE) while the donor-sp²-acceptor counterpart structure exhibits a non-emissive solid state. Unexpectedly, it was discovered that a trace amount (0.01 %) of the structurally similar derivative, produced by a side reaction with the DMF solvent, could induce strong RTP with an absolute RTP yield up to 25.4 % and a lifetime of 48 ms, although the substance does not show RTP by itself. Single-crystal XRD-based calculations suggest that n–σ* orbital interactions as a result of structural similarity may be responsible for the strong RTP in the bicomponent system. This study provides a new insight into the design of multi-component, solid-state RTP materials from organic molecular systems.     

Carbon Dots with Dual‐Emissive,Robust, and Aggregation‐Induced Room‐Temperature Phosphorescence Characteristics

Carbon dots (CDs) with dual‐emissive, robust, and aggregation‐induced RTP characteristics are reported for the first time. The TA‐CDs are prepared via hydrothermal treatment of trimellitic acid and exhibit unique white prompt and yellow RTP emissions in solid state under UV excitation (365 nm) on and off, respectively. The yellow RTP emission of TA‐CDs powder should be resulted from the formation of a new excited triplet state due to their aggregation, and the white prompt emission is due to their blue fluorescence and yellow RTP dual‐emissive nature. The RTP emission of TA‐CDs powder was highly stable under grinding, which is very rare amongst traditional pure organic RTP materials. To employ the unique characteristics of TA‐CDs, advanced anti‐counterfeiting and information encryption methodologies (water‐stimuli‐response producing RTP) were preliminarily investigated.     

Metal–Organic Gels from Silver Nanoclusters with Aggregation‐Induced Emission and Fluorescence‐to‐Phosphorescence Switching

Luminescent metal nanoclusters (NCs) are emerging as a new class of functional materials that have rich physicochemical properties and wide potential applications. In recent years, it has been found that some metal NCs undergo aggregation‐induced emission (AIE) and an interesting fluorescence‐to‐phosphorescence (F‐P) switching in solutions. However, insights of both the AIE and the F‐P switching remain largely unknown. Now, gelation of water soluble, atomically precise Ag₉ NCs is achieved by the addition of antisolvent. Self‐assembly of Ag₉ NCs into entangled fibers was confirmed, during which AIE was observed together with an F‐P switching occurring within a narrow time scale. Structural evaluation indicates the fibers are highly ordered. The self‐assembly of Ag₉ NCs and their photoluminescent property are thermally reversible, making the metal–organic gels good candidates for luminescent ratiometric thermometers.     

Highly Luminescent Inks: Aggregation‐Induced Emission of Copper–Iodine Hybrid Clusters

Aggregation‐induced emission (AIE) is an attractive phenomenon in which materials display strong luminescence in the aggregated solid states rather than in the conventional dissolved molecular states. However, highly luminescent inks based on AIE are hard to be obtained because of the difficulty in finely controlling the crystallinity of AIE materials at nanoscale. Herein, we report the preparation of highly luminescent inks via oil‐in‐water microemulsion induced aggregation of Cu–I hybrid clusters based on the highly soluble copper iodide‐tris(3‐methylphenyl)phosphine (Cu₄I₄(P‐(m‐Tol)₃)₄) hybrid. Furthermore, we can synthesize a series of AIE inks with different light‐emission colors to cover the whole visible spectrum range via a facile ligand exchange processes. The assemblies of Cu–I hybrid clusters with AIE characteristics will pave the way to fabricate low‐cost highly luminescent inks.     

Domino Staudinger/aza‐Wittig/Mannich Reaction: An Approach to Diversity of Di‐ and Tetrahydropyrrole Scaffolds

A highly efficient and selective domino reaction producing valuable di‐ and tetrahydropyrrole‐based skeletons from azidoethyl‐substituted CH‐acids and (thio)carbonyl compounds has been developed. By involving the additional functional groups in starting compounds into the domino reaction or postmodification of the primary reaction products, the simple construction of the pharmaceutically relevant three‐ and polycyclic azaheterocyclic scaffolds was demonstrated.     

Time‐Dependent Aggregation‐Induced Enhanced Emission,Absorption Spectral Broadening,and Aggregation Morphology of a Novel Perylene Derivative with a Large D–π–A Structure

Strong aggregation‐caused quenching of perylene diimides (PDI) is changed successfully by simple chemical modification with two quinoline moieties through C?C at the bay positions to obtain aggregation‐induced enhanced emission (AIEE) of a perylene derivative ( Cya‐PDI ) with a large π‐conjugation system. Cya‐PDI is weakly luminescent in the well‐dispersed CH₃CN or THF solutions and exhibits an evident time‐dependent AIEE and absorption spectra broadening in the aggregated state. In addition, morphological inspection demonstrates that the morphology of the aggregated form of Cya‐PDI molecules changed from plate‐shaped to rod‐like aggregates under the co‐effects of time and water. An edge‐to‐face arrangement of aggregation was proposed and discussed. The fact that the Cya‐PDI aggregates show a broad absorption covering the whole visible‐light range and strong intermolecular interaction through π–π stacking in the solid state makes them promising materials for optoelectric applications.     

Exquisite 1D Assemblies Arising from Rationally Designed Asymmetric Donor–Acceptor Architectures Exhibiting Aggregation‐Induced Emission as a Function of Auxiliary Acceptor Strength

One‐dimensional nanostructures with aggregation‐induced emission (AIE) properties have been fabricated to keep the pace with growing demand from optoelectronics applications. The compounds 2‐[4‐(4‐methylpiperazin‐1‐yl)benzylidene]malononitrile ( PM1 ), 2‐{4‐[4‐(pyridin‐2‐yl)piperazin‐1‐yl]‐benzylidene}malononitrile ( PM2 ), and 2‐{4‐[4‐(pyrimidin‐2‐yl)piperazin‐1‐yl]benzylidene}malononitrile ( PM3 ) have been designed and synthesized by melding piperazine and dicyanovinylene to investigate AIE in an asymmetric donor–acceptor (D–A) construct of A′–D–π–A‐ topology. The synthetic route has been simplified by using phenylpiperazine as a weak donor (D), dicyanovinylene as an acceptor (A), and pyridyl/pyrimidyl groups ( PM2/PM3 ) as auxiliary acceptors (A′). It has been established that A′ plays a vital role in triggering AIE in these compounds because the same D–A construct led to aggregation‐caused quenching upon replacing A′ with an electron‐donating ethyl group ( PM1 ). Moreover, the effect of restricted intramolecular rotation and twisted intramolecular charge transfer on the mechanism of AIE has also been investigated. Furthermore, it has been clearly shown that the optical disparities of these A′–D–π–A architectures are a direct consequence of comparative A′ strength. Single‐crystal X‐ray analyses provided justification for role of intermolecular interactions in aggregate morphology. Electrochemical and theoretical studies affirmed the effect of the A′ strength on the overall properties of the A′–D–π–A system.     

Solvent Effects on the Actinic Step of Donor–Acceptor Stenhouse Adduct Photoswitching

Donor–acceptor Stenhouse adducts (DASAs) are negative photochromes that switch with visible light and are highly promising for applications ranging from smart materials to biological systems. However, the strong solvent dependence of the photoswitching kinetics limits their application. The nature of the photoswitching mechanism in different solvents is key for addressing the solvatochromism of DASAs, but as yet has remained elusive. Here, we employ spectroscopic analyses and TD‐DFT calculations to reveal changing solvatochromic shifts and energies of the species involved in DASA photoswitching. Time‐resolved visible pump‐probe spectroscopy suggests that the primary photochemical step remains the same, irrespective of the polarity and protic nature of the solvent. Disentangling the different factors determining the solvent‐dependence of DASA photoswitching, presented here, is crucial for the rational development of applications in a wide range of different media.     

Exceptional Blueshifted and Enhanced Aggregation‐Induced Emission of Conjugated Asymmetric Triazines and Their Applications in Superamplified Detection of Explosives

A novel conjugated asymmetric donor–acceptor (CADA) strategy for preventing the redshift in photoluminescence, as well as preserving the merits of donor–acceptor architectures, was proposed and demonstrated for two triazine derivatives, which showed highly efficient, narrow, and blueshifted ultraviolet light emission in solid films along with special aggregation‐induced emission behavior. A mechanism of aggregation‐induced locally excited‐state emission by suppressing the twisted intramolecular charge‐transfer emission for the spectacular optoelectronic phenomena of these CADA molecules was suggested on the basis of both experimental measurements and theoretical calculations. By taking advantage of this special CADA architecture, fluorescent probes based on aggregates of conjugated asymmetric triazines in THF/water for the detection of explosives show superamplified detection of picric acid with high quenching constants (>1.0×10⁷ M ^?1) and a low detection limit of 15 ppb.     

Multistimuli‐Responsive Luminescence Switching of Pyrazine Derivative Based Donor–Acceptor–Donor Luminophores

Three symmetrical donor–acceptor–donor (D–A–D) luminophores ( C1 , C2 , and C3 ) with pyrazine derivatives as electron‐withdrawing groups have been developed for multistimuli‐responsive luminescence switching. For comparison, reference compounds R1 and R2 without the pyrazine moiety have also been synthesized. Intramolecular charge transfer (ICT) interactions can be found for all D–A–D luminophores owing to the electron‐withdrawing properties of the two imine nitrogen atoms in the pyrazine ring and the electron‐donating properties of the other two amine nitrogen atoms in the two triphenylamine units. Moreover, luminophores C1 , C2 , and C3 exhibit “on–off–on” luminescence switching properties in mixtures of water/tetrahydrofuran with increasing water content, which is different from the “on–off” switching for typical aggregation‐caused quenching (ACQ) materials and “off–on” switching for traditional aggregation‐induced emission (AIE) materials. Additionally, upon grinding the pristine samples, luminophores C1 , C2 , and C3 display bathochromically shifted photoluminescence maxima that can be recovered by either solvent fuming or thermal annealing treatments. The piezofluorochromic (PFC) properties are more pronounced than those for reference compounds R1 and R2 , which indicates that D–A molecules have the ability to amplify the PFC effect by tuning the ICT interactions upon tiny structural changes under pressure. Furthermore, the target luminophores demonstrate acid‐responsive photoluminescence spectra that can be recovered in either basic or ambient environments. These results suggest that D–A complexes are potential candidates for multistimuli‐responsive luminescence switching because their ICT profiles can be facilely tuned with tiny external stimuli.     

Wide‐Range Light‐Harvesting Donor–Acceptor Assemblies through Specific Intergelator Interactions via Self‐Assembly

We have synthesized two new low‐molecular‐mass organogelators based on tri‐p‐phenylene vinylene derivatives, one of which could be designated as the donor whereas the other one is an acceptor. These were prepared specifically to show the intergelator interactions at the molecular level by using donor–acceptor self‐assembly to achieve appropriate control over their macroscopic properties. Intermolecular hydrogen‐bonding, π‐stacking, and van der Waals interactions operate for both the individual components and the mixtures, leading to the formation of gels in the chosen organic solvents. Evidence for intergelator interactions was acquired from various spectroscopic, microscopic, thermal, and mechanical investigations. Due to the photochromic nature of these molecules, interesting photophysical properties, such as solvatochromism and J‐type aggregation, were clearly observed. An efficient energy transfer was exhibited by the mixture of donor–acceptor assemblies. An array of four chromophores was built up by inclusion of two known dyes (anthracene and rhodamine 6G) for the energy‐transfer studies. Interestingly, an energy‐transfer cascade was observed in the assembly of four chromophores in a particular order (anthracene‐donor‐acceptor‐rhodamine 6G), and if one of the components was removed from the assembly the energy transfer process was discontinued. This allowed the build up of a light‐harvesting process with a wide range. Excitation at one end produces an emission at the other end of the assembly.     

Aggregation‐Induced Photon Upconversion through Control of the Triplet Energy Landscapes of the Solution and Solid States

Aggregation‐induced photon upconversion (iPUC) based on control of the triplet energy landscape is demonstrated for the first time. When a triplet state of a cyano‐substituted 1,4‐distyrylbenzene derivative is sensitized in solution, no upconverted emission based on triplet–triplet annihilation (TTA) was observed. In stark contrast, crystalline solids obtained by drying the solution revealed clear upconverted emission. Theoretical studies unveiled an underlying switching mechanism: the excited triplets in solution immediately decay back to the ground state through conformational twisting around a C?C bond and photoisomerization, whereas this deactivation path is effectively inhibited in the solid state. The finding of iPUC phenomena highlights the importance of controlling excited energy landscapes in condensed molecular systems.     

Phthalocyanine‐Sensitized Graphene–CdS Nanocomposites: An Enhanced Photoelectrochemical Immunosensing Platform

A novel strategy is developed for the fabrication of graphene–CdS (G–CdS) nanocomposites by in situ growth of CdS nanoparticles onto simultaneously reduced graphite oxide, which is noncovalently functionalized by sodium 1‐pyrene sulfonate through strong π–π stacking interactions. Subsequently, cobalt 2,9,16,23‐tetraaminophthalocyanine (CoTAPc) is self‐assembled on the G–CdS nanocomposites through electrostatic interactions to produce phthalocyanine‐sensitized G–CdS nanocomposites. The photoactive superstructure enhances the photocurrent generation capability, and presents an efficient photoelectrochemical immunosensing platform for the ultrasensitive detection of the prostate‐specific antigen (PSA). The quantitative measurement of PSA is based on the decrease in the photocurrent intensity of the phthalocyanine‐sensitized G–CdS nanocomposites, which results from an increase in the steric hindrance due to the formation of the immunocomplex. A linear relationship between the photocurrent decrease and the PSA concentration is obtained in the wide range from 1 pg mL^?1 to 5 μg mL^?1 with a detection limit of 0.63 pg mL^?1. The proposed sensor shows high sensitivity, stability, reproducibility, and can become a promising platform for other biomolecular detection.     

From Dark to Light to Fluorescence Resonance Energy Transfer (FRET): Polarity‐Sensitive Aggregation‐Induced Emission (AIE)‐Active Tetraphenylethene‐Fused BODIPY Dyes with a Very Large Pseudo‐Stokes Shift

The work presented herein is devoted to the fabrication of large Stokes shift dyes in both organic and aqueous media by combining dark resonance energy transfer (DRET) and fluorescence resonance energy transfer (FRET) in one donor–acceptor system. In this respect, a series of donor–acceptor architectures of 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) dyes substituted by one, two, or three tetraphenylethene (TPE) luminogens were designed and synthesised. The photophysical properties of these three chromophore systems were studied to provide insight into the nature of donor–acceptor interactions in both THF and aqueous media. Because the generation of emissive TPE donor(s) is strongly polarity dependent, due to its aggregation‐induced emission (AIE) feature, one might expect the formation of appreciable fluorescence emission intensity with a very large pseudo‐Stokes shift in aqueous media when considering FRET process. Interestingly, similar results were also recorded in THF for the chromophore systems, although the TPE fragment(s) of the dyes are non‐emissive. The explanation for this photophysical behaviour lies in the DRET. This is the first report on combining two energy‐transfer processes, namely, FRET and DRET, in one polarity‐sensitive donor–acceptor pair system. The accuracy of the dark‐emissive donor property of the TPE luminogen is also presented for the first time as a new feature for AIE phenomena.     

GaCl3‐Mediated Reactions of Donor–Acceptor Cyclopropanes with Aromatic Aldehydes

A new strategy for cascade assembly of substituted indenes and polycyclic lactones based on reactions of donor–acceptor cyclopropanes and styrylmalonates with aromatic aldehydes in the presence of GaCl₃ has been developed. The use of GaCl₃ makes it possible to principally change the direction of the reaction known in this series of substrates and to perform the process in a multicomponent version. Generation of formal 1,2‐zwitterionic intermediates owing to complexation of dicarboxylate groups with GaCl₃ is the driving force of the reactions discovered. This method makes it possible to assemble indenylmalonates or indano[1′,2′:2,3]indano[2,1‐b]furan‐2‐ones in one synthetic stage from readily available starting compounds with high regio‐ and diastereoselectivity. A mechanism of the reactions has been suggested using the ¹⁸O label in benzaldehyde.     

Green's function calculation of through‐bond electronic coupling in donor–bridge–acceptor model systems II: Importance factors applied to atomic sites

Importance factors, associated with the Green's function formalism, are introduced. They are applied for the determination of the relative atomic site contribution to the electronic interaction propagation in a molecular system. The calculation is performed at the Hartree–Fock (self‐consistent) level, using ab initio STO‐3G, 4‐31G, and D95 basis sets. The results are compared with those obtained from the charge densities of the appropriate molecular orbitals at the ab initio STO‐3G level. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

An AAA–DDD Triply Hydrogen‐Bonded Complex Easily Accessible for Supramolecular Polymers

For a complementary hydrogen‐bonded complex, when every hydrogen‐bond acceptor is on one side and every hydrogen‐bond donor is on the other, all secondary interactions are attractive and the complex is highly stable. AAA–DDD (A=acceptor, D=donor) is considered to be the most stable among triply hydrogen‐bonded sequences. The easily synthesized and further derivatized AAA–DDD system is very desirable for hydrogen‐bonded functional materials. In this case, AAA and DDD, starting from 4‐methoxybenzaldehyde, were synthesized with the Hantzsch pyridine synthesis and Friedländer annulation reaction. The association constant determined by fluorescence titration in chloroform at room temperature is 2.09×10⁷ M ^?1. The AAA and DDD components are not coplanar, but form a V shape in the solid state. Supramolecular polymers based on AAA–DDD triply hydrogen bonded have also been developed. This work may make AAA–DDD triply hydrogen‐bonded sequences easily accessible for stimuli‐responsive materials.