Formation of a Single-Crystal Aluminum-Based MOF Nanowire with Graphene Oxide Nanoscrolls as Structure-Directing Agents

An innovative strategy is proposed to synthesize single-crystal nanowires (NWs) of the Al³⁺ dicarboxylate MIL-69(Al) MOF by using graphene oxide nanoscrolls as structure-directing agents. MIL-69(Al) NWs with an average diameter of 70±20 nm and lengths up to 2 μm were found to preferentially grow along the [001] crystallographic direction. Advanced characterization methods (electron diffraction, TEM, STEM-HAADF, SEM, XPS) and molecular modeling revealed the mechanism of formation of MIL-69(Al) NWs involving size-confinement and templating effects. The formation of MIL-69(Al) seeds and the self-scroll of GO sheets followed by the anisotropic growth of MIL-69(Al) crystals are mediated by specific GO sheets/MOF interactions. This study delivers an unprecedented approach to control the design of 1D MOF nanostructures and superstructures.     

Syntheses,Characterizations and Adsorption Properties of MIL‐101/Graphene Oxide Composites

Composites of the Cr³⁺‐based metal‐organic framework (MIL‐101) and graphene oxide (GO) have been synthesized with different ratios of MIL‐101 and GO. The composites and the parent material MIL‐101 were characterized by X‐ray diffraction, scanning electron microscopy and nitrogen adsorption. The results indicated that the incorporation of large amounts of GO (10 and 20 wt%) almost did not prevent the formation of MIL‐101 units, but had an obvious impact on the size of MIL‐101 crystals. On the contrary, small amounts of GO added (2 and 5 wt%) prevented significantly the proper assembly of MIL‐101 units, thus resulting in a pronounced decrease in the porosities of composites.     

Enhancing the Water Stability of Al‐MIL‐101‐NH2 via Postsynthetic Modification

The resistance of metal–organic frameworks towards water is a very critical issue concerning their practical use. Recently, it was shown for microporous MOFs that the water stability could be increased by introducing hydrophobic pendant groups. Here, we demonstrate a remarkable stabilisation of the mesoporous MOF Al‐MIL‐101‐NH₂ by postsynthetic modification with phenyl isocyanate. In this process 86 % of the amino groups were converted into phenylurea units. As a consequence, the long‐term stability of Al‐MIL‐101‐URPh in liquid water could be extended beyond a week. In water saturated atmospheres Al‐MIL‐101‐URPh decomposed at least 12‐times slower than the unfunctionalised analogue. To study the underlying processes both materials were characterised by Ar, N₂ and H₂O sorption measurements, powder X‐ray diffraction, thermogravimetric and chemical analysis as well as solid‐state NMR and IR spectroscopy. Postsynthetic modification decreased the BET equivalent surface area from 3363 to 1555 m² g^?1 for Al‐MIL‐101‐URPh and reduced the mean diameters of the mesopores by 0.6 nm without degrading the structure significantly and reducing thermal stability. In spite of similar water uptake capacities, the relative humidity‐dependent uptake of Al‐MIL‐101‐URPh is slowed and occurs at higher relative humidity values. In combination with ¹H‐²⁷Al D ‐HMQC NMR spectroscopy experiments this favours a shielding mechanism of the Al clusters by the pendant phenyl groups and rules out pore blocking.     

MIL‐53(Al) as a Versatile Platform for Ionic‐Liquid/MOF Composites to Enhance CO2 Selectivity over CH4 and N2

Five different imidazolium‐based ionic liquids (ILs) were incorporated into a metal–organic framework (MOF), MIL‐53(Al), to investigate the effect of IL incorporation on the CO₂ separation performance of MIL‐53(Al). CO₂, CH₄, and N₂ adsorption isotherms of the IL/MIL‐53(Al) composites and pristine MIL‐53(Al) were measured to evaluate the effect of the ILs on the CO₂/CH₄ and CO₂/N₂ selectivities of the MOF. Of the composite materials that were tested, [BMIM][PF₆]/MIL‐53(Al) exhibited the largest increase in CO₂/CH₄ selectivity, 2.8‐times higher than that of pristine MIL‐53(Al), whilst [BMIM][MeSO₄]/MIL‐53(Al) exhibited the largest increase in CO₂/N₂ selectivity, 3.3‐times higher than that of pristine MIL‐53(Al). A comparison of the CO₂ separation potentials of the IL/MOF composites showed that the [BMIM][BF₄]‐ and [BMIM][PF₆]‐incorporated MIL‐53(Al) composites both showed enhanced CO₂/N₂ and CO₂/CH₄ selectivities at pressures of 1–5 bar compared to composites of CuBTC and ZIF‐8 with the same ILs. These results demonstrate that MIL‐53(Al) is a versatile platform for IL/MOF composites and could help to guide the rational design of new composites for target gas‐separation applications.     

Synthesis of chromene derivatives in the presence of mordenite zeolite/MIL‐101 (Cr) metal–organic framework composite as catalyst

In the present study, the synthesis of mordenite zeolite/MIL‐101(Cr) metal–organic framework (MOF) composite [MOR/MIL‐101(Cr)] using the ship in a bottle method was suggested. The properties of prepared composite and individual MOF and MOR zeolite were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption–desorption measurement, and thermogravimetric analysis (TGA). The XRD results indicated diffraction peaks for each compound (MOR and MOF) in composite. The SEM and TEM images showed the formation of plates MOR (with size of 2.5 × 3 μm) along with spherical particles MIL‐101. The Brunauer–Emmett–Teller results showed that the surface area of the composite was smaller than individual MOF and MOR zeolite. Based on TGA plots, the hybrid zeolite/MOF composite was more thermally stable compared with the isolated MIL‐101(Cr). The composite was functionalized by post‐synthetic modification to obtain acid–base bifunctionality (H‐MOR/MIL‐101‐ED) for the synthesis of chromene derivatives. The acidity from framework Al‐O(H)‐Si sites in MOR and basicity from amine groups in MIL‐101 were obtained by post‐synthetic modification.     

Polystyrene‐Supported Core–Shell Beads with Aluminium MOF Coating for Extraction of Organic Pollutants

Aluminium‐based metal–organic framework (MOF) coatings on polystyrene bead surfaces were easily synthesized by reacting an intermediate metal hydroxide coating with an organic linker. Several different sizes of polystyrene beads were coated with aluminium metal hydroxide to construct Al@PS core–shell bead materials. The activated Al@PS core–shell beads were involved to make a homogenous MOF‐based layer in the presence of the organic linker. By using different sizes of the PS support the size of MOFs on the PS composites could be fine‐tuned under specific reaction conditions. MOF‐coated core–shell bead materials (Al‐1,4‐NDC@PS and MIL‐53(Al)@PS) were characterized using various analytical techniques. Al‐1,4‐NDC@PS and MIL‐53(Al)@PS were evaluated for solid‐phase microextraction (SPME) of hydrophobic polycyclic aromatic hydrocarbons (PAHs) and hydrophilic non‐steroidal anti‐inflammatory drugs (NSAIDs), respectively. Al‐1,4‐NDC@PS‐1000 displayed high extraction recoveries ranging from 79.2 % to 99.8 % in the SPME of PAHs. Meanwhile, MIL‐53(Al)@PS‐1000 showed 85.9–99.0 % extraction recoveries in the SPME of NSAIDs. These results show that the proposed approach holds potential to extract organic analytes on an industrial scale.     

Molecular Level Characterization of the Structure and Interactions in Peptide‐Functionalized Metal–Organic Frameworks

We use density functional theory, newly parameterized molecular dynamics simulations, and last generation ¹⁵N dynamic nuclear polarization surface enhanced solid‐state NMR spectroscopy (DNP SENS) to understand graft–host interactions and effects imposed by the metal–organic framework (MOF) host on peptide conformations in a peptide‐functionalized MOF. Focusing on two grafts typified by MIL‐68‐proline ( ‐Pro ) and MIL‐68‐glycine‐proline ( ‐Gly‐Pro ), we identified the most likely peptide conformations adopted in the functionalized hybrid frameworks. We found that hydrogen bond interactions between the graft and the surface hydroxyl groups of the MOF are essential in determining the peptides conformation(s). DNP SENS methodology shows unprecedented signal enhancements when applied to these peptide‐functionalized MOFs. The calculated chemical shifts of selected MIL‐68‐NH‐ Pro and MIL‐68‐NH‐ Gly‐Pro conformations are in a good agreement with the experimentally obtained ¹⁵N NMR signals. The study shows that the conformations of peptides when grafted in a MOF host are unlikely to be freely distributed, and conformational selection is directed by strong host–guest interactions.     

One‐pot self‐assembly and photoreduction synthesis of silver nanoparticle‐decorated reduced graphene oxide/MIL‐125(Ti) photocatalyst with improved visible light photocatalytic activity

In recent years, tremendous research efforts have been made towards developing metal–organic framework (MOF)‐based composites for photocatalytic applications. In this work, bipyramid‐like MIL‐125(Ti) frustum enwrapped with reduced graphene oxide (rGO) and dispersed silver nanoparticles (Ag NPs) was fabricated using an efficient one‐pot self‐assembly and photoreduction strategy. The as‐obtained materials were characterized using field emission scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, nitrogen adsorption–desorption isotherms, and X‐ray photoelectron, ultraviolet–visible diffuse reflectance and photoluminescence spectroscopies. It is found that the as‐prepared Ag/rGO/MIL‐125(Ti) ternary hybrids have large surface area, microporous structure, enhanced visible light absorption and prolonged lifetime of charge carriers. Compared with pure MIL‐125(Ti) and its binary counterparts, the ternary composite exhibits more efficient photocatalytic performance for Rhodamine B (RhB) degradation from water under visible light irradiation. The photodegradation rate of RhB on Ag/rGO/MIL‐125(Ti) is 0.0644 min^?1, which is 1.62 times higher than that of the pure MIL‐125(Ti). The improved photocatalytic performance is ascribed to the indirect dye photosensitization, the Ag NP localized surface plasmon resonance, the Ti³⁺–Ti⁴⁺ intervalence electron transfer and the synergistic effect among MIL‐125(Ti), Ag NPs and rGO. Ag NPs serve as an efficient ‘electron reservoir’ and rGO as an electron transporter and collector. Therefore, this work provides a new pathway into the design of MOF‐based composites for application in environmental and energy fields. Copyright © 2016 John Wiley & Sons, Ltd.     

Extra‐Framework Aluminum Species of Zeolite that Surrogate the Growth of Metal Organic Framework from Zeolite Matrix

Constructing a robust hybrid material with a porous inorganic and a porous organic framework is highly intriguing owing to its diverse functionality and porosity. However, the line of synthesis is not straightforward, since their nucleation and crystal growth processes are incompatible. Here, a simple method for the fabrication of hybrid zeolite/metal–organic framework of different framework structures is developed wherein the less‐useful extra‐framework aluminum species present in the zeolite surrogate the growth of metal organic framework (MOF) from the zeolite matrix in the presence of organic linkers of the corresponding MOF. An NMR study confirms that all the octahedral Al species are converted to Al‐MOF. TGA analysis shows that 32 % Al of H‐Beta is converted to Al‐MOF. Furthermore, NH₃ TPD analysis shows that most of the weak acid sites disappear but strong acid sites are preserved suggesting the utilization of weakly bound Al species of H‐Beta in the growth of Al‐MOF. The synthesis strategy is successfully demonstrated using H‐Beta, H‐ZSM‐5, and H‐Y zeolites for the growth of MIL‐53 and MIL‐96 MOFs from the zeolite matrix. This synthesis strategy enables application‐based engineering of the framework structures, functionality, and porosity of the materials.     

Preparation and Gas Separation Properties of Metal‐Organic Framework Membranes

Continuous and intergrown metal‐organic framework (MOF) membranes, MIL‐100(In) (MIL represents Materials Institute Lavoisier), were prepared directly on porous anodic alumina oxide (AAO) membranes using an in situ crystallization method. The pore surface of MIL‐100(In) is conferred with polarity due to the presence of the 1, 3,5‐benzenetricarboxylic acid. The thickness of MIL‐100(In) membranes was tuned by varying the reactant concentration of indium chloride and 1, 3,5‐benzenetricarboxylic acid. Single gas permeation measurements on this MOF membrane indicate the large permeances of 0.90 × 10^–6 and 0.81 × 10^–6 mol · m^–2·s^–1·Pa^–1 for CO₂ and CH₄, and relatively high ideal selective factors of 3.75 and 3.38 for CO₂/N₂ and CH₄/N₂, respectively.     

The Metal–Organic Framework MIL‐53(Al) Constructed from Multiple Metal Sources: Alumina,Aluminum Hydroxide,and Boehmite

Three aluminum compounds, namely alumina, aluminum hydroxide, and boehmite, are probed as the metal sources for the hydrothermal synthesis of a typical metal–organic framework MIL‐53(Al). The process exhibits enhanced synthetic efficiency without the generation of strongly acidic byproducts. The time‐course monitoring of conversion from different aluminum sources into MIL‐53(Al) is achieved by multiple characterization that reveals a similar but differentiated crystallinity, porosity, and morphology relative to typical MIL‐53(Al) prepared from water‐soluble aluminum salts. Moreover, the prepared MIL‐53(Al) constructed with the three insoluble aluminum sources exhibit an improved thermal stability of up to nearly 600 °C and enhanced yields. Alumina and boehmite are more preferable than aluminum hydroxide in terms of product porosity, yield, and reaction time. The adsorption performances of a typical environmental endocrine disruptor, dimethyl phthalate, on the prepared MIL‐53(Al) samples are also investigated. The improved structural stability of MIL‐53(Al) prepared from these alternative aluminum sources enables double‐enhanced adsorption performance (up to 206 mg g^?1) relative to the conventionally obtained MIL‐53(Al).     

Enhanced Photocatalytic Activity of MIL‐125 by Post‐Synthetic Modification with CrIII and Ag Nanoparticles

NH₂‐MIL‐125, [Ti₈O₈(OH)₄(bdc‐NH₂)₆] (bdc^2?=1,4‐benzene dicarboxylate) is a highly porous metal–organic framework (MOF) that has a band gap lying within the ultraviolet region at about 2.6 eV. The band gap may be reduced by a suitable post‐synthetic modification of the nanochannels using conventional organic chemistry methods. Here, it is shown that the photocatalytic activity of NH₂‐MIL‐125 in the degradation of methylene blue under visible light is remarkably augmented by post‐synthetic modification with acetylacetone followed by Cr^III complexation. The latter metal ion extends the absorption from the ultraviolet to the visible light region (band gap 2.21 eV). The photogenerated holes migrate from the MOF’s valence band to the Cr^III valence band, promoting the separation of holes and electrons and increasing the recombination time. Moreover, it is shown that the MOF’s photocatalytic activity is also much improved by doping with Ag nanoparticles, formed in situ by the reduction of Ag⁺ with the acetylacetonate pendant groups (the resulting MOF band gap is 2.09 eV). Presumably, the Ag nanoparticles are able to accept the MOF’s photogenerated electrons, thus avoiding electron–hole recombination. Both, the Cr‐ and Ag‐bearing materials are stable under photocatalytic conditions. These findings open new avenues for improving the photocatalytic activity of MOFs.     

Effect of Central Metal Ions of Analogous Metal–Organic Frameworks on Adsorption of Organoarsenic Compounds from Water: Plausible Mechanism of Adsorption and Water Purification

The adsorptive removal of organoarsenic compounds such as p‐arsanilic acid (ASA) and roxarsone (ROX) from water using metal–organic frameworks (MOFs) has been investigated for the first time. A MOF, iron benzenetricarboxylate (also called MIL‐100‐Fe) exhibits a much higher adsorption capacity for ASA and ROX than activated carbon, zeolite (HY), goethite, and other MOFs. The adsorption of ASA and ROX over MIL‐100‐Fe is also much more rapid than that over activated carbon. Moreover, the used MIL‐100‐Fe can be recycled by simply washing with acidic ethanol. Therefore, it is determined that a MOF such as MIL‐100‐Fe can be used to remove organoarsenic compounds from contaminated water because of its high adsorption capacity, rapid adsorption, and ready regeneration. Moreover, only one of three analogous MIL‐100 species (MIL‐100‐Fe, rather than MIL‐100‐Al or MIL‐100‐Cr) can effectively remove the organoarsenic compounds. This selective and high adsorption over MIL‐100‐Fe, different from other analogous MIL‐100 species, can be explained (through calculations) by the facile desorption of water from MIL‐100‐Fe as well as the large (absolute value) replacement energy (difference between the adsorption energies of the organoarsenic compounds and water) exhibited by MIL‐100‐Fe. A plausible adsorption/desorption mechanism is proposed based on the surface charge of the MOFs, FTIR results, calculations, and the reactivation results with respect to the solvents used in the experiments.     

Monolithic metal–organic framework MIL‐53(Al)‐polymethacrylate composite column for the reversed‐phase capillary liquid chromatography separation of small aromatics

A monolithic capillary column containing a composite of metal–organic framework MIL‐53(Al) incorporated into hexyl methacrylate‐co‐ethylene dimethacrylate was prepared to enhance the separation of mixtures of small aromatic compounds by using capillary liquid chromatography. The addition of 10 mg/mL MIL‐53(Al) microparticles increased the micropore content in the monolithic matrix and increased the Brunauer–Emmett–Teller surface area from 26.92 to 85.12 m²/g. The presence of 1,4‐benzenedicarboxylate moieties within the structure of MIL‐53(Al) as an organic linker greatly influenced the separation of aromatic mixtures through π–π interactions. High‐resolution separation was obtained for a series of alkylbenzenes (with resolution factors in the range 0.96–1.75) in less than 8 min, with 14 710 plates/m efficiency for propylbenzene, using a binary polar mobile phase of water/acetonitrile in isocratic mode. A reversed‐phase separation mechanism was indicated by the increased retention factor and resolution as the water percentage in the mobile phase increased. A stability study on the composite column showed excellent mechanical stability under various conditions. The higher resolution and faster separation observed at increased temperature indicated an exothermic separation, whereas the negative values for the free energy change of transfer indicated a spontaneous process.     

Acetone‐Induced Graphene Oxide Film Formation at the Water–Air Interface

Graphene oxide (GO) is an amphiphilic soft material, which can accumulate at the water–air interface. However, GO sheets diffuse slowly in the aqueous phase because of their large size. It is still challenging to form high quality GO films in a controllable and simple way. In this study, we showed that GO sheets can quickly migrate to the water–air interface and form thin films when a suitable amount of acetone is directly mixed with a GO aqueous dispersion. The film formation rate and surface coverage of GO sheets depend on the volume of acetone added, GO dispersion concentration, and formation time. Among several organic solvents, acetone has its advantage for GO film formation owing to its three properties: a nonsolvent to GO aqueous dispersions, miscible with a GO aqueous dispersion, and fast evaporation. Furthermore, we have found that the film formation also is governed by the size of GO sheets and their oxygen content. Although smaller GO sheets could migrate to the water–air interface faster, the overlapping of small GO sheets and the increase in contact resistance is not desirable. A higher oxygen content in GO sheets could also result in smaller GO sheets. Multilayer GO films can be obtained through layer‐by‐layer dip‐coating. These findings open opportunities in developing simple scalable GO film fabrication processes.     

The synthesis of metal–organic framework Al‐MIL‐53‐derived Brønsted acid catalyst and its application in the Mannich reaction

A metal–organic framework Al‐MIL‐53‐NH₂‐derived Brønsted acid catalyst (Al‐MIL‐53‐RSO₃H) has been synthesized employing a post‐synthetic modification strategy under mild conditions. The Al‐MIL‐53‐RSO₃H catalyst was successfully utilized in the nitro‐Mannich reaction taking advantage of its strong Brønsted acidity. Good to excellent yields of Mannich adducts were achieved for a variety of acylimine substrates in the presence of 0.1 mol% Al‐MIL‐53‐RSO₃H. Furthermore, the Al‐MIL‐53‐RSO₃H catalyst can be recycled five times without decreasing the yield and selectivity of Mannich adducts.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.     

Microwave‐Assisted Hydrothermal Synthesis of [Al(OH)(1,4‐NDC)] Membranes with Superior Separation Performances

In this study, we report a facile ligand‐assisted in situ hydrothermal approach for preparation of compact [Al(OH)(1,4‐NDC)] (1,4‐NDC=1,4‐naphthalenedicarboxylate) MOF membranes on porous γ‐Al₂O₃ substrates, which also served as the Al³⁺ source of MOF membranes. Simultaneously, it was observed that the heating mode exerted significant influence on the final microstructure and separation performance of [Al(OH)(1,4‐NDC)] membranes. Compared with the conventional hydrothermal method, the employment of microwave heating led to the formation of [Al(OH)(1,4‐NDC)] membranes composed of closely packed nanorods with superior H₂/CH₄ selectivity.     

Mixed‐Metal MIL‐100(Sc,M) (M=Al,Cr, Fe) for Lewis Acid Catalysis and Tandem CC Bond Formation and Alcohol Oxidation

The trivalent metal cations Al³⁺, Cr³⁺, and Fe³⁺ were each introduced, together with Sc³⁺, into MIL‐100(Sc,M) solid solutions (M=Al, Cr, Fe) by direct synthesis. The substitution has been confirmed by powder X‐ray diffraction (PXRD) and solid‐state NMR, UV/Vis, and X‐ray absorption (XAS) spectroscopy. Mixed Sc/Fe MIL‐100 samples were prepared in which part of the Fe is present as α‐Fe₂O₃ nanoparticles within the mesoporous cages of the MOF, as shown by XAS, TGA, and PXRD. The catalytic activity of the mixed‐metal catalysts in Lewis acid catalysed Friedel–Crafts additions increases with the amount of Sc present, with the attenuating effect of the second metal decreasing in the order Al>Fe>Cr. Mixed‐metal Sc,Fe materials give acceptable activity: 40 % Fe incorporation only results in a 20 % decrease in activity over the same reaction time and pure product can still be obtained and filtered off after extended reaction times. Supported α‐Fe₂O₃ nanoparticles were also active Lewis acid species, although less active than Sc³⁺ in trimer sites. The incorporation of Fe³⁺ into MIL‐100(Sc) imparts activity for oxidation catalysis and tandem catalytic processes (Lewis acid+oxidation) that make use of both catalytically active framework Sc³⁺ and Fe³⁺. A procedure for using these mixed‐metal heterogeneous catalysts has been developed for making ketones from (hetero)aromatics and a hemiacetal.     

Large‐Scale,Bottom‐Up Synthesis of Binary Metal–Organic Framework Nanosheets for Efficient Water Oxidation

Ultrathin metal–organic framework (MOF) nanosheets (NSs) offer potential for many applications, but the synthetic strategies are largely limited to top‐down, low‐yield exfoliation methods. Herein, Ni–M–MOF (M=Fe, Al, Co, Mn, Zn, and Cd) NSs are reported with a thickness of only several atomic layers, prepared by a large‐scale, bottom‐up solvothermal method. The solvent mixture of N,N‐dimethylacetamide and water plays key role in controlling the formation of these two‐dimensional MOF NSs. The MOF NSs can be directly used as efficient electrocatalysts for the oxygen evolution reaction, in which the Ni–Fe–MOF NSs deliver a current density of 10 mA cm^?2 at a low overpotential of 221 mV with a small Tafel slope of 56.0 mV dec^?1, and exhibit excellent stability for at least 20 h without obvious activity decay. Density functional theory calculations on the energy barriers for OER occurring at different metal sites confirm that Fe is the active site for OER at Ni–Fe–MOF NSs.