A Pyrolysis‐Free Covalent Organic Polymer for Oxygen Reduction

Highly efficient electrocatalysts derived from metal–organic frameworks (MOFs) and covalent organic frameworks (COFs) for oxygen reduction reaction (ORR) have been developed. However, the subsequent pyrolysis is often needed owing to their poor intrinsic electrical conductivity, leading to undesirable structure changes and destruction of the original fine structure. Now, hybrid electrocatalysts were formed by self‐assembling pristine covalent organic polymer (COP) with reduced graphene oxide (rGO). The electrical conductivity of the hybridized COP/rGO materials is increased by more than seven orders of magnitude (from 3.06×10^?9 to 2.56×10^?1 S m^?1) compared with pure COPs. The ORR activities of the hybrid are enhanced significantly by the synergetic effect between highly active COP and highly conductive rGO. This COP/rGO hybrid catalyst exhibited a remarkable positive half‐wave (150 mV).     

N‐Doped Carbon Aerogel Derived from a Metal–Organic Framework Foam as an Efficient Electrocatalyst for Oxygen Reduction

Metal–organic frameworks (MOFs) are promising alternative precursors for the fabrication of heteroatom‐doped carbon materials for energy storage and conversion. However, the direct pyrolysis of bulk MOFs usually gives microporous carbonaceous materials, which significantly hinder the mass transportation and the accessibility of active sites. Herein, N‐doped carbon aerogels with hierarchical micro‐, meso‐, and macropores were fabricated through one‐step pyrolysis of zeolitic imidazolate framework‐8/carboxymethylcellulose composite gel. Owing to the hierarchical porosity, high specific surface area, favorable conductivity, excellent thermal and chemical stability, the as‐prepared N‐doped carbon aerogel exhibits excellent oxygen reduction reaction (ORR) activity, long‐term durability, and good methanol tolerance in alkaline medium. This work thus provides a new way to fabricate new types of MOF‐derived carbon aerogels for various applications.     

Heat-Treated Aerogel as a Catalyst for the Oxygen Reduction Reaction

Aerogels are fascinating materials that can be used for a wide range of applications, one of which is electrocatalysis of the important oxygen reduction reaction. In their inorganic form, aerogels can have ultrahigh catalytic site density, high surface area, and tunable physical properties and chemical structures—important features in heterogeneous catalysis. Herein, we report on the synthesis and electrocatalytic properties of an iron–porphyrin aerogel. 5,10,15,20-(Tetra-4-aminophenyl)porphyrin (H₂TAPP) and Fe^II were used as building blocks of the aerogel, which was later heat-treated at 600 °C to enhance electronic conductivity and catalytic activity, while preserving its macrostructure. The resulting material has a very high concentration of atomically dispersed catalytic sites (9.7×10²⁰ sites g⁻¹) capable of catalyzing the oxygen reduction reaction in alkaline solution (E_onset=0.92 V vs. RHE, TOF=0.25 e⁻ site⁻¹ s⁻¹ at 0.80 V vs. RHE).     

Hyperporous‐Carbon‐Supported Nonprecious Metal Electrocatalysts for the Oxygen Reduction Reaction

Highly porous carbonaceous nonprecious metal catalysts for the oxygen reduction reaction are prepared by carbonization of low‐cost metalloporphyrin‐based hyper‐crosslinked polymers (MPH‐X). With high surface area (2768 m² g⁻¹), hierarchical porous structure, and high metal loading (9.97 wt %), the obtained hyperporous carbon MPH‐Fe/C catalyst exhibits high oxygen reduction reaction (ORR) activity with a half‐wave potential (0.816 V) that is comparable to the 0.819 V of commercial Pt/C. Stability tests reveal that MPH‐Fe/C also exhibits outstanding long‐term durability and methanol tolerance. Our findings may offer an alternative approach to produce nonprecious metal ORR catalysts on a large scale owing to the low‐cost MPH‐X precursors with diverse metal types.     

Cobalt–Nitrogen‐Doped Helical Carbonaceous Nanotubes as a Class of Efficient Electrocatalysts for the Oxygen Reduction Reaction

The oxygen reduction reaction (ORR) is of significant importance in the development of fuel cells. Now, cobalt–nitrogen‐doped chiral carbonaceous nanotubes (l/d ‐CCNTs‐Co) are presented as efficient electrocatalysts for ORR. The chiral template, N‐stearyl‐l/d ‐glutamic acid, induces the self‐assembly of well‐arranged polypyrrole and the formation of ordered graphene carbon with helical structures at the molecular level after the pyrolysis process. Co was subsequently introduced through the post‐synthesis method. The obtained l/d ‐CCNTs‐Co exhibits superior ORR performance, including long‐term stability and better methanol tolerance compared to achiral Co‐doped carbon materials and commercial Pt/C. DFT calculations demonstrate that the charges on the twisted surface of l/d ‐CCNTs are widely separated; as a result the Co atoms are more exposed on the chiral CCNTs. This work gives us a new understanding of the effects of helical structures in electrocatalysis.     

Solvent Effects on Metal-free Covalent Organic Frameworks in Oxygen Reduction Reaction

Binding water molecules to polar sites in covalent organic frameworks (COFs) is inevitable, but the corresponding solvent effects in electrocatalytic process have been largely overlooked. Herein, we investigate the solvent effects on COFs for catalyzing the oxygen reduction reaction (ORR). Our designed COFs incorporated different kinds of nitrogen atoms (imine N, pyridine N, and phenazine N), enabling tunable interactions with water molecules. These interactions play a crucial role in modulating electronic states and altering the catalytic centers within the COFs. Among the synthesized COFs, the one with pyridine N atoms exhibits the highest activity, with characterized by a half-wave potential of 0.78 V and a mass activity of 0.32 A mg⁻¹, which surpass those from other metal-free COFs. Theoretical calculations further reveal that the enhanced activity can be attributed to the stronger binding ability of *OOH intermediates to the carbon atoms adjacent to the pyridine N sites. This work sheds light on the significance of considering solvent effects on COFs in electrocatalytic systems, providing valuable insights into their design and optimization for improved performance.     

Metallocorroles as Nonprecious‐Metal Catalysts for Oxygen Reduction

The future of affordable fuel cells strongly relies on the design of earth‐abundant (non‐platinum) catalysts for the electrochemical oxygen reduction reaction (ORR). However, the bottleneck in the overall process occurs therein. We have examined herein trivalent Mn, Fe, Co, Ni, and Cu complexes of β‐pyrrole‐brominated corrole as ORR catalysts. The adsorption of these complexes on a high‐surface‐area carbon powder (BP2000) created a unique composite material, used for electrochemical measurements in acidic aqueous solutions. These experiments disclosed a clear dependence of the catalytic activity on the metal center of the complexes, in the order of Co>Fe>Ni>Mn>Cu. The best catalytic performance was obtained for the Co^III corrole, whose onset potential was as positive as 0.81 V versus the reversible hydrogen electrode (RHE). Insight into the properties of these systems was gained by spectroscopic and computational characterization of the reduced and oxidized forms of the metallocorroles.     

Sulfur‐Doped Graphene Derived from Cycled Lithium–Sulfur Batteries as a Metal‐Free Electrocatalyst for the Oxygen Reduction Reaction

Heteroatom‐doped carbon materials have been extensively investigated as metal‐free electrocatalysts to replace commercial Pt/C catalysts in oxygen reduction reactions in fuel cells and Li–air batteries. However, the synthesis of such materials usually involves high temperature or complicated equipment. Graphene‐based sulfur composites have been recently developed to prolong the cycling life of Li–S batteries, one of the most attractive energy‐storage devices. Given the high cost of graphene, there is significant demand to recycle and reuse graphene from Li–S batteries. Herein, we report a green and cost‐effective method to prepare sulfur‐doped graphene, achieved by the continuous charge/discharge cycling of graphene–sulfur composites in Li–S batteries. This material was used as a metal‐free electrocatalyst for the oxygen reduction reaction and shows better electrocatalytic activity than pristine graphene and better methanol tolerance durability than Pt/C.     

Bifunctional Catalysts for Reversible Oxygen Evolution Reaction and Oxygen Reduction Reaction

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.     

Copper–Organic Framework Fabricated with CuS Nanoparticles: Synthesis,Electrical Conductivity,and Electrocatalytic Activities for Oxygen Reduction Reaction

To apply electrically nonconductive metal–organic frameworks (MOFs) in an electrocatalytic oxygen reduction reaction (ORR), we have developed a new method for fabricating various amounts of CuS nanoparticles (nano‐CuS) in/on a 3D Cu–MOF, [Cu₃(BTC)₂?(H₂O)₃] (BTC=1,3,5‐benzenetricarboxylate). As the amount of nano‐CuS increases in the composite, the electrical conductivity increases exponentially by up to circa 10⁹‐fold, while porosity decreases, compared with that of the pristine Cu‐MOF. The composites, nano‐CuS(x wt %)@Cu‐BTC, exhibit significantly higher electrocatalytic ORR activities than Cu‐BTC or nano‐CuS in an alkaline solution. The onset potential, electron transfer number, and kinetic current density increase when the electrical conductivity of the material increases but decrease when the material has a poor porosity, which shows that the two factors should be finely tuned by the amount of nano‐CuS for ORR application. Of these materials, CuS(28 wt %)@Cu‐BTC exhibits the best activity, showing the onset potential of 0.91 V vs. RHE, quasi‐four‐electron transfer pathway, and a kinetic current density of 11.3 mA cm^?2 at 0.55 V vs. RHE.     

Efficient Fe‐Co‐N‐C Electrocatalyst Towards Oxygen Reduction Derived from a Cationic CoII‐based Metal–Organic Framework Modified by Anion‐Exchange with Potassium Ferricyanide

Fe‐Co‐N‐C electrocatalysts have proven superior to their counterparts (e.g. Fe‐N‐C or Co‐N‐C) for the oxygen reduction reaction (ORR). Herein, we report on a unique strategy to prepare Fe‐Co‐N‐C?x (x refers to the pyrolysis temperature) electrocatalysts which involves anion‐exchange of [Fe(CN)₆]^3? into a cationic Co^II‐based metal‐organic framework precursor prior to heat treatment. Fe‐Co‐N‐C‐900 exhibits an optimal ORR catalytic performance in an alkaline electrolyte with an onset potential (E_onset: 0.97 V) and half‐wave potential (E_1/2: 0.86 V) comparable to that of commercial Pt/C (E_onset=1.02 V; E_1/2=0.88 V), which outperforms the corresponding Co‐N‐C‐900 sample (E_onset=0.92 V; E_1/2=0.84 V) derived from the same MOF precursor without anion‐exchange modification. This is the first example of Fe‐Co‐N‐C electrocatalysts fabricated from a cationic Co^II‐based MOF precursor that dopes the Fe element via anion‐exchange, and our current work provides a new entrance towards MOF‐derived transition‐metal (e.g. Fe or Co) and nitrogen‐codoped carbon electrocatalysts with excellent ORR activity.     

Highly Efficient Electrocatalysts for Oxygen Reduction Based on 2D Covalent Organic Polymers Complexed with Non‐precious Metals

A class of 2D covalent organic polymers (COPs) incorporating a metal (such as Fe, Co, Mn) with precisely controlled locations of nitrogen heteroatoms and holes were synthesized from various N‐containing metal–organic complexes (for example, metal–porphyrin complexes) by a nickel‐catalyzed Yamamoto reaction. Subsequent carbonization of the metal‐incorporated COPs led to the formation of COP‐derived graphene analogues, which acted as efficient electrocatalysts for oxygen reduction in both alkaline and acid media with a good stability and free from any methanol‐crossover/CO‐poisoning effects.     

Single‐Atom Iron Catalysts on Overhang‐Eave Carbon Cages for High‐Performance Oxygen Reduction Reaction

Single‐atom catalysts have drawn great attention, especially in electrocatalysis. However, most of previous works focus on the enhanced catalytic properties via improving metal loading. Engineering morphologies of catalysts to facilitate mass transport through catalyst layers, thus increasing the utilization of each active site, is regarded as an appealing way for enhanced performance. Herein, we design an overhang‐eave structure decorated with isolated single‐atom iron sites via a silica‐mediated MOF‐templated approach for oxygen reduction reaction (ORR) catalysis. This catalyst demonstrates superior ORR performance in both alkaline and acidic electrolytes, comparable to the state‐of‐the‐art Pt/C catalyst and superior to most precious‐metal‐free catalysts reported to date. This activity originates from its edge‐rich structure, having more three‐phase boundaries with enhanced mass transport of reactants to accessible single‐atom iron sites (increasing the utilization of active sites), which verifies the practicability of such a synthetic approach.     

碱性介质中Fe/N/C催化剂的氧气还原反应催化性能研究

以氧化石墨烯(GO)为碳载体, K₃Fe(CN)₆同时作为N源和Fe源, 经热处理后构建了新型Fe/N/C结构的氧气还原催化剂. 在热处理过程中, 氧化石墨烯上的官能团分解脱离形成活性中心, Fe元素和N元素的同时掺杂是通过氧化石墨烯与K₃Fe(CN)₆之间的相互作用而实现的. 通过傅立叶变换红外光谱(FTIR)和X射线光电子能谱(XPS)表征证明了这种非贵金属催化剂中N元素和Fe元素的成功掺杂, 在催化剂中N元素主要是以吡啶式氮、吡咯式氮和石墨式氮的形式存在, Fe(Ⅱ)和Fe(Ⅲ)则与其中的吡啶式氮配位形成Fe-N_x结构. 采用循环伏安法(CV)和旋转圆盘电极(RDE)技术, 研究其在碱性介质中对氧气还原反应(ORR)的电催化性能. 实验结果显示: Fe/N/C催化剂具有良好的ORR电催化活性, 在碱性溶液中的起始电位为-0.15 V, 同时有着良好的稳定性和抗甲醇性能.     

Copper‐Modified Covalent Triazine Frameworks as Non‐Noble‐Metal Electrocatalysts for Oxygen Reduction

The electrochemical oxygen reduction reaction (ORR) is an important cathode reaction of various types of fuel cells. The development of electrocatalysts composed only of abundant elements is a key goal because currently only platinum is a suitable catalyst for ORR. Herein, we synthesized copper‐modified covalent triazine frameworks (CTF) hybridized with carbon nanoparticles (Cu‐CTF/CPs) as efficient electrocatalysts for the ORR in neutral solutions. The ORR onset potential of the synthesized Cu‐CTF/CP was 810 mV versus the reversible hydrogen electrode (RHE; pH 7), the highest reported value at neutral pH for synthetic Cu‐based electrocatalysts. Cu‐CTF/CP also displayed higher stability than a Cu‐based molecular complex at neutral pH during the ORR, a property that was likely as a result of the covalently cross‐linked structure of CTF. This work may provide a new platform for the synthesis of durable non‐noble‐metal electrocatalysts for various target reactions.     

Cu-bipy-BTC衍生碳基材料的制备及其氧还原电催化性能

制备高效、廉价的氧还原(ORR)电催化剂是燃料电池的技术关键. 本文采用水热法制备出前驱体金属有机骨架化合物（MOF：Cu-bipy-BTC,bipy=2,2′-联吡啶,BTC=均苯三甲酸）后,再高温煅烧得到碳基材料MOF-800. 采用扫描电镜、X射线衍射、红外光谱、氮气吸附/脱附等温线和X射线光电子谱表征了材料的形貌和结构特征;采用线性扫描伏安曲线、i-t曲线等考察了材料的氧还原催化性能. 结果表明,与前驱体Cu-bipy-BTC相比,MOF-800含有大量的微孔(0.5 ~ 1.3 nm),为铜、氮掺杂多孔碳. MOF-800的电荷转移阻抗为10.6 Ω,比Cu-bipy-BTC降低了97.2%,具有优良的导电性. MOF-800具有优异的ORR催化性能,其起始电位约为-0.04 V(vs. Ag/AgCl),其电子转移数接近4. 铜、氮掺杂的多孔碳结构导电性好,高含量的吡啶氮、吡咯氮和石墨氮提供了大量催化活性位点(C-N, Cu-N_x),是MOF-800具有高氧还原电催化性能的主要原因. 本研究可为煅烧Cu-bipy-BTC制备碳基材料用于燃料电池修饰阴极提供技术支撑与理论依据.     

三维氮掺杂石墨烯气凝胶负载钴酞菁作为高效的氧气还原反应催化剂

通过两步溶剂热法制备得到三维氮掺杂石墨烯与吡啶氧基钴酞菁的复合材料(CoTPPc/NGA).该复合材料具有优良的氧气还原性能,在起峰电位和半波上接近商业化的铂碳催化剂(Pt/C),且在稳定性和抗甲醇性能上优于铂碳催化剂,有望代替铂碳催化剂成为碱性直接甲醇燃料电池的阴极催化剂.