Tailored Palladium Catalysts for Selective Synthesis of Conjugated Enynes by Monocarbonylation of 1,3-Diynes

For the first time, the monoalkoxycarbonylation of easily available 1,3-diynes to give synthetically useful conjugated enynes has been realized. Key to success was the design and utilization of the new ligand 2,2′-bis(tert-butyl(pyridin-2-yl)phosphanyl)-1,1′-binaphthalene (Neolephos), which permits the palladium-catalyzed selective carbonylation under mild conditions, providing a general preparation of functionalized 1,3-enynes in good-to-high yields with excellent chemoselectivities. Synthetic applications that showcase the possibilities of this novel methodology include an efficient one-pot synthesis of 4-aryl-4H-pyrans as well as the rapid construction of various heterocyclic, bicyclic, and polycyclic compounds.     

A General and Highly Selective Palladium‐Catalyzed Hydroamidation of 1,3‐Diynes

A chemo‐, regio‐, and stereoselective mono‐hydroamidation of (un)symmetrical 1,3‐diynes is described. Key for the success of this novel transformation is the utilization of an advanced palladium catalyst system with the specific ligand Neolephos. The synthetic value of this general approach to synthetically useful α‐alkynyl‐α, β‐unsaturated amides is showcased by diversification of several structurally complex molecules and marketed drugs. Control experiments and density‐functional theory (M06L‐SMD) computations also suggest the crucial role of the substrate in controlling the regioselectivity of unsymmetrical 1,3‐diynes.     

Catalytic Cycloisomerization of 1,5‐Enynes to 1,3‐Cyclohexadienes via Ruthenium Vinylidene Intermediates

Another way to dienes : The ruthenium‐catalyzed 6‐endo‐cycloisomerization of 1,5‐enynes gives the corresponding 1,3‐cyclohexadienes in high to excellent yields. This novel synthetic and catalytic method constitutes another way to selectively prepare 1,3‐cyclohexadienes, this cyclic diene skeleton being a core subunit in many natural products and a useful building block for a variety of organic transformations.

     

Pd‐Senphos Catalyzed trans‐Selective Cyanoboration of 1,3‐Enynes

The first trans‐selective cyanoboration reaction of an alkyne, specifically a 1,3‐enyne, is described. The reported palladium‐catalyzed cyanoboration of 1,3‐enynes is site‐, regio‐, and diastereoselective, and is uniquely enabled by the 1,4‐azaborine‐based Senphos ligand structure. Tetra‐substituted alkenyl nitriles are obtained providing useful boron‐dienenitrile building blocks that can be further functionalized. The utility of our method has been demonstrated with the synthesis of Satigrel, an anti‐platelet aggregating agent.     

Selective Hydroarylation of 1,3‐Diynes Using a Dimeric Manganese Catalyst: Modular Synthesis of Z‐Enynes

The transition‐metal‐catalyzed selective hydroarylation of unsymmetrical alkynes represents the state‐of‐art in organic chemistry, and still mainly relies on the use of precious late‐transition‐metal catalysts. Reported herein is an unprecedented Mn^I‐catalyzed hydroarylation of unsymmetrical 1,3‐diyne alcohols with commercially available arylboronic acids with predictive selectivity. This method addresses the challenges in regio‐, stereo‐, and chemoselectivity. It offers a general, convenient and practical strategy for the modular synthesis of multisubstituted Z‐configurated conjugated enynes. This protocol is distinguished by its operational simplicity, complete selectivity, excellent functional‐group compatibility, and gram‐scale potential. A dimeric Mn^I species, Mn₂(CO)₈Br₂, was proven to be a much more efficient catalyst precursor than Mn(CO)₅Br.     

Enantioselective Synthesis of Multisubstituted Allenes by Cooperative Cu/Pd‐Catalyzed 1,4‐Arylboration of 1,3‐Enynes

A cooperative Cu/Pd‐catalyzed enantioselective synthesis of multisubstituted allenes is established. By employing chiral sulfoxide phosphine (SOP)/Cu and PdCl₂(dppf) complexes as catalysts, the 1,4‐arylboration of 1,3‐enynes provides an efficient approach to trisubstituted chiral allenes with up to 92 % yield and 97:3 er. Furthermore, by using 2‐substituted 1,3‐enynes as substrates, the tetrasubstituted chiral allenes were successfully generated using this strategy. Finally, theoretical calculations indicate that the transmetallation of the allenylcopper species is the rate‐limiting step of this transformation.     

Synthesis of Unsymmetrical 1,3‐Diynes via Pd/Cu‐Catalyzed Cross‐Coupling of Terminal Alkynes at Room Temperature

A facile and practical synthetic route of unsymmetrical 1,3‐diynes via the PdCl/CuI catalyzed oxidative coupling of two different terminal alkynes has been developed by using 3‐(diphenylphosphino)propanoic acid as a ligand in the presence of oxygen. This system is suitable for not only aromatic alkynes but also heteroaromatic and aliphatic alkynes which were transformed into the corresponding unsymmetrical 1,3‐diynes in moderate to good yields at room temperature. Moreover, the unsymmetrical 1,3‐diynes were also obtained on a multi‐gram scale. Mechanistic studies suggest that oxygen plays a key role in the catalytic cycles.     

Stereoselective Synthesis of Highly Substituted Conjugated Dienes via Pd‐Catalyzed Carbonylation of 1,3‐Diynes

The stereoselective synthesis of conjugated dienes was realized for the first time via Pd‐catalyzed alkoxycarbonylation of easily available 1,3‐diynes. Key to success is the utilization of the specific ligand 1,1′‐ferrocenediyl‐bis(tert‐butyl(pyridin‐2‐yl)phosphine) ( L1 ), which allows this novel transformation to proceed at room temperature. A range of 1,2,3,4‐tetrasubstituted conjugated dienes are obtained in this straightforward access in high yields and selectivities. The synthetic utility of the protocol is showcased in the concise synthesis of several important intermediates for construction of natural products rac‐cagayanin, rac‐galbulin, rac‐agastinol, and cannabisin G.     

Tandem β‐Boration/Arylation of α,β‐Unsaturated Carbonyl Compounds by Using a Single Palladium Complex To Catalyse Both Steps

Diphenyl(3‐methyl‐2‐indolyl)phosphine (C₉H₈NPPh₂, 1 ) gives stable dimeric palladium(II) complexes that contain the phosphine in P,N‐bridging coordination mode. On treating 1 with [Pd(O₂CCH₃)₂], the new complexes [Pd(μ‐C₉H₇NPPh₂)(NCCH₃)]₂ ( 2 ) or [Pd(μ‐C₉H₇NPPh₂)(μ‐O₂CCH₃)]₂ ( 3 ) were isolated, depending on the solvent used, acetonitrile or toluene, respectively. Further reaction of 3 with the ammonium salt of 1 led to the substitution of one carboxylate ligand to afford [Pd(μ‐C₉H₇NPPh₂)₃(μ‐O₂CCH₃)] ( 4 ), in which the bimetallic unit is bonded by three C₉H₇NPPh₂^? moieties and one carboxylate group. Using this methodology, [Pd₂(μ‐C₆H₄PPh₂)₂(μ‐C₉H₇NPPh₂)(μ‐O₂CCX₃)] (X=H ( 7 ); X=F ( 8 )) were synthesised from the ortho‐metalated compounds [Pd(C₆H₄PPh₂)(μ‐O₂CCX₃)]₂ (X=H ( 5 ); X=F ( 6 )). Complexes 3 , 4 , 7 , and 8 have been found to be active in the catalytic β‐boration of α,β‐unsaturated esters and ketones under mild reaction conditions. Hindrance of the carbonyl moiety has an influence on the reaction rate, but quantitative conversion was achieved in many cases. More remarkably, when aryl bromides were added to the reaction media, complex 7 induced a highly successful consecutive β‐boration/cross‐coupling reaction with dimethyl acrylamide as the substrate (99 % conversion, 89 % isolated yield).     

Metal‐Free Radical 5‐exo‐dig Cyclizations of Phenol‐Linked 1,6‐Enynes for the Synthesis of Carbonylated Benzofurans

A new metal‐free radical 5‐exo‐dig cyclization of phenol‐linked 1,6‐enynes with O₂, 2,2,6,6‐tetramethyl‐1‐piperidinyloxy (TEMPO), and tBuONO is described. With this general method, carbonylated benzofurans can be accessed through incorporation of two oxygen atoms into the product from O₂ and TEMPO through dioxygen activation and oxidative cleavage of the N? O bond, respectively.     

Highly Robust Palladium(II) α‐Diimine Catalysts for Slow‐Chain‐Walking Polymerization of Ethylene and Copolymerization with Methyl Acrylate

A series of sterically demanding α‐diimine ligands bearing electron‐donating and electron‐withdrawing substituents were synthesized by an improved synthetic procedure in high yield. Subsequently, the corresponding Pd complexes were prepared and isolated by column chromatography. These Pd complexes demonstrated unique properties in ethylene polymerization, including high thermal stability and high activity, thus generating polyethylene with a high molecular weight and very low branching density. Similar properties were observed for ethylene/methyl acrylate copolymerization. Because of the high molecular weight and low branching density, the generated polyethylene and ethylene/methyl acrylate copolymer were semicrystalline solids. The (co)polymers had unique microstructures originating from the unique slow‐chain‐walking activity of these Pd complexes.     

An Examination of the Palladium/Mor‐DalPhos Catalyst System in the Context of Selective Ammonia Monoarylation at Room Temperature

An examination of the [{Pd(cinnamyl)Cl}₂]/Mor‐DalPhos (Mor‐DalPhos=di(1‐adamantyl)‐2‐morpholinophenylphosphine) catalyst system in Buchwald–Hartwig aminations employing ammonia was conducted to better understand the catalyst formation process and to guide the development of precatalysts for otherwise challenging room‐temperature ammonia monoarylations. The combination of [{Pd(cinnamyl)Cl}₂] and Mor‐DalPhos afforded [(κ²‐P,N‐Mor‐DalPhos)Pd(η¹‐cinnamyl)Cl] ( 2 ), which, in the presence of a base and chlorobenzene, generated [(κ²‐P,N‐Mor‐DalPhos)Pd(Ph)Cl] ( 1 a ). Halide abstraction from 1 a afforded [(κ³‐P,N,O‐Mor‐DalPhos)Pd(Ph)]OTf ( 5 ), bringing to light a potential stabilizing interaction that is offered by Mor‐DalPhos. An examination of [(κ²‐P,N‐Mor‐DalPhos)Pd(aryl)Cl] ( 1 b – f ) and related precatalysts for the coupling of ammonia and chlorobenzene at room temperature established the suitability of 1 a in such challenging applications. The scope of reactivity for the use of 1 a (5 mol %) encompassed a range of (hetero)aryl (pseudo)halides (X=Cl, Br, I, OTs) with diverse substituents (alkyl, aryl, ether, thioether, ketone, amine, fluoro, trifluoromethyl, and nitrile), including chemoselective arylations.