Two-Photon Absorption Enhancement by the Inclusion of a Tropone Ring in Distorted Nanographene Ribbons

A new family of distorted ribbon-shaped nanographenes was designed, synthesized, and their optical and electrochemical properties were evaluated, pointing out an unprecedented correlation between their structural characteristics and the two-photon absorption (TPA) responses and electrochemical band gaps. Three nanographene ribbons have been prepared: a seven-membered-ring-containing nanographene presenting a tropone moiety at the edge, its full-carbon analogue, and a purely hexagonal one. We have found that the TPA cross-sections and the electrochemical band gaps of the seven-membered-ring-containing compounds are higher and lower, respectively, than those of the fully hexagonal polycyclic aromatic hydrocarbon (PAH). Interestingly, the inclusion of additional curvature has a positive effect in terms of non-linear optical properties of those ribbons.     

Formation of Azulene‐Embedded Nanographene: Naphthalene to Azulene Rearrangement During the Scholl Reaction

Incorporation of a non‐hexagonal ring into a nanographene framework can lead to new electronic properties. During the attempted synthesis of naphthalene‐bridged double [6]helicene and heptagon‐containing nanographene by the Scholl reaction, an unexpected azulene‐embedded nanographene and its triflyloxylated product were obtained, as confirmed by X‐ray crystallographic analysis and 2D NMR spectroscopy. A 5/7/7/5 ring‐fused substructure containing two formal azulene units is formed, but only one of them shows an azulene‐like electronic structure. The formation of this unique structure is explained by arenium ion mediated 1,2‐phenyl migration and a naphthalene to azulene rearrangement reaction according to an in‐silico study. This report represents the first experimental example of the thermodynamically unfavorable naphthalene to azulene rearrangement and may lead to new azulene‐based molecular materials.     

Naphthalimide‐Based Triptycenes: Synthesis and Optoelectronic Properties

In the past decades, the naphthalimide structure has found application in many areas of chemistry due to its unique photophysical properties. Naphthalimide has two isomers, 1,8‐naphthalimide containing a six‐membered imide ring and 2,3‐naphthalimide containing a five‐membered imide ring. The former has been widely investigated while studies on the latter are considerably more rare. On the other hand, naphthalimide can also be regarded as a building block to construct polycyclic aromatic hydrocarbons (PAHs), which have found wide applications in optical materials. Here we report the synthesis and optoelectronic properties of three 2,3‐naphthalimide‐based triptycenes. These three triptycene derivatives enrich the family of triptycenes.     

Alternating fluorene copolymers containing isothianaphthene derivatives: A study of their aggregation properties and small band gap

Several fluorene copolymers containing isothianaphthene units ( P1 , P2 , and P3 ) or similar derivatives ( P4 and P5 ) have been synthesized by Pd‐catalyzed Suzuki polymerization. The monomers containing isothianaphthene were prepared by a ring‐closure reaction with Lawesson's reagent. Strong photoluminescence (PL) quenching in the film state was observed for P1 and P2 , which was mainly due to the enhanced quinoid character formed by introducing the isothianaphthene unit. Their energy levels of the compounds were determined using cyclic voltammetry. Among the polymers tested, the polymer containing both an isothianaphthene and a selenophene unit, P2 , showed the smallest band gap of 1.85 eV. The influence of structural variation on the band gap of the polymer chains was further investigated by optimizing the geometries of several model monomers. Our results based on the optical and electrochemical properties combined with theoretical calculations showed that polymers containing isothianaphthene have small band gaps, rigid conformations, and strong tendencies to aggregation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3573–3590, 2008     

An Electron‐Poor C64 Nanographene by Palladium‐Catalyzed Cascade C−C Bond Formation: One‐Pot Synthesis and Single‐Crystal Structure Analysis

Herein, we report the one‐pot synthesis of an electron‐poor nanographene containing dicarboximide groups at the corners. We efficiently combined palladium‐catalyzed Suzuki–Miyaura cross‐coupling and dehydrohalogenation to synthesize an extended two‐dimensional π‐scaffold of defined size in a single chemical operation starting from N‐(2,6‐diisopropylphenyl)‐4,5‐dibromo‐1,8‐naphthalimide and a tetrasubstituted pyrene boronic acid ester as readily accessible starting materials. The reaction of these precursors under the conditions commonly used for Suzuki–Miyaura cross‐coupling afforded a C₆₄ nanographene through the formation of ten C?C bonds in a one‐pot process. Single‐crystal X‐ray analysis unequivocally confirmed the structure of this unique extended aromatic molecule with a planar geometry. The optical and electrochemical properties of this largest ever synthesized planar electron‐poor nanographene skeleton were also analyzed.     

A Core‐Expanded Subphthalocyanine Analogue with a Significantly Distorted Conjugated Surface and Unprecedented Properties

The introduction of a seven‐membered‐ring unit in the place of a five‐membered‐ring unit in the structure of subphthalocyanine resulted in significant distortion of the bowl‐shaped structure of the conjugated molecule as well as the following unprecedented properties: the preferential formation of the axially fluoro substituted species, the fluttering‐dynamic‐motion‐induced rapid exchange of P and M enantiomers, markedly split Q‐band absorption, and a clear difference in the ring‐current effects arising from the convex and concave surfaces.     

Azulene in Polymers and Their Properties

Azulene, a unique isomer of naphthalene, has received much interest from researchers in different fields due to its unusual chemical structure with a negatively charged 5‐membered ring fused with a positively charged 7‐membered ring. In particular, incorporation of azulene into polymers has led to many interesting properties. This minireview covers functionalization methods of azulene at its various positions of 5‐ and 7‐membered rings to form azulene derivatives including azulene monomers, and gives an overview of a wide range of azulene‐containing polymers including poly(1,3‐azulene), azulene‐based copolymers with connectivity at 1,3‐positions of the 5‐membered ring, or 4,7‐positions of the 7‐membered ring, as well as copolymers with azulene units as side chains. Their chemical and physical properties together with applications of azulene‐containing polymers have also been summarized.     

Hybrid [5]Radialenes with Bispyrroloheteroles: New Electron‐Donating Units

Bispyrroloheteroles have been synthesized to address their intrinsic structural, optical, and electrochemical properties. The X‐ray crystal structures and calculated natural bond orbital (NBO) bond orders unambiguously demonstrated the existence of a two pyrrole‐fused five‐membered ring with short exocyclic C?C double bonds and long endocyclic C?C single bonds, supporting that the bispyrroloheteroles are rare examples of structurally characterized hybrid [5]radialenes. The bispyrroloheteroles were found to act as an electron‐donating unit, which would be fascinating for the rational design of new charge‐transporting and donor–acceptor photovoltaic materials as well as versatile charge‐transfer complexes.     

A Dipleiadiene‐Embedded Aromatic Saddle Consisting of 86 Carbon Atoms

This study presents a new type of negatively curved nanographene (C₈₆H₃₂) that contains an unprecedented pattern of heptagons. A tert‐butylated derivative of C₈₆H₃₂ was successfully synthesized using tetrabenzodipleiadiene as a key building block. This synthesis involved a ring expansion reaction as a key step to form the seven‐membered rings in the framework of tetrabenzodipleiadiene. The single‐crystal structure reveals a saddle‐shaped molecule with a highly bent naphthalene moiety at the center of the polycyclic backbone. As found from the DFT calculations, this aromatic saddle is flexible at room temperature and has a saddle‐shaped geometry as the dominant conformation. The DFT calculations along with experimental results show that the attachment of t‐butyl groups to the central tetrabenzodipleiadiene moiety of nanographene C₈₆H₃₂ can stabilize the saddle conformation and make this nanographene less flexible.     

Singly and Doubly 1,2‐Phenylene‐Inserted Porphyrin Arch‐Tape Dimers: Synthesis and Highly Contorted Structures

Singly and doubly 1,2‐phenylene‐inserted Ni^II porphyrin arch‐tape dimers 3 and 9 were synthesized from the corresponding β‐to‐β 1,2‐phenylene‐bridged Ni^II porphyrin dimers 5 and 11 via Ni⁰‐mediated reductive cyclization and DDQ/Sc(OTf)₃‐promoted oxidative cyclization as key steps, respectively. Owing to the fused eight‐membered ring(s), 3 showed a more contorted structure than those of previously reported arch‐tape dimers 2 a and 2 b possessing a fused seven‐membered ring. Furthermore, 9 displayed much larger molecular contortion. As the molecular contortion increases, the Q band of the absorption spectrum becomes more red‐shifted and the electrochemcial HOMO–LUMO gap becomes smaller, reaching at 1294 nm and 0.77 eV in 9 , respectively. The effect of molecular contortion on the electronic properties was studied by means of DFT calculations.     

Beryllepin,C6H6Be,and “Beryllium‐Inserted Benzenes,” C6H6Ben,n = 2–6: A Density Functional Computational Investigation

The seven‐membered beryllium‐containing heterocycle beryllepin, C₆H₆Be, has been examined computationally at the B3LYP/6‐311++G** density functional level of theory. Beryllepin is best described as a planar singlet heterocyclic conjugated triene with marginal aromatic character containing a C–Be–C moiety forced to be nonlinear (∠C‐Be‐C = 146.25°) by the cyclic constraints of the seven‐membered ring. The molecule can be considered to be derived from a benzene‐like system in which a neutral beryllium atom has been inserted between two adjacent carbon atoms. The 11 other possible “beryllium‐inserted benzenes,” C₆H₆Be_n, n = 2–6, have also been investigated. Only two of these heterocyclic systems, the eight‐membered 1,4‐diberyllocin and the nine‐membered 1,4,7‐triberyllonin, were found to be stable, singlet‐ground‐state systems, albeit with little aromatic character. Of the remaining nine beryllium‐inserted benzenes, with the exception of the 11‐membered ring containing five beryllium atoms and the 12‐membered ring containing six beryllium atoms, which were calculated to exist as a ground state pentet and septet, respectively, all were calculated to be ground state triplet systems.     

Synthesis,Properties, and Packing Structures of Corannulene‐Based π‐Systems Containing Heptagons

Introduction of heptagons into hexagonal carbon lattices can generate negatively curved polycyclic aromatic hydrocarbons, which are of significant interest in the field of exotic molecular nanocarbons. We have successfully synthesized and characterized corannulene‐based π‐systems containing heptagons ( 4 and 5 ) as new negatively curved polycyclic aromatic hydrocarbons as well as possible intermediates in the synthesis of warped nanographene 1 . The formation of 4 and 5 represents the first example for which a heptagon is formed under Scholl reaction conditions before all hexagons are formed. Even more interestingly, we discovered that the mode and degree of solid‐phase intermolecular π–π interaction can be altered significantly by the degree of ring closure.     

Quantum chemical study on enantioselective reduction of keto oxime ether with borane catalyzed by oxazaborolidine. Part 2. Structures of catalyst‐alkoxyborane adduct with a four‐membered ring and succeeding reaction intermediates

Quantum chemical ab initio computations of the structures and properties of oxazaborolidine‐alkoxyborane adduct with a B? N? B? O four‐membered ring and succeeding reaction intermediates are carried out in the current work by means of the Hartree–Fock (HF) and the density functional methods. All the structures are optimized completely at the HF/6‐31G(d) and Becke's three‐parameter exchange functional and the gradient‐corrected functional of Lee, Yang, and Paar (B3LYP)/6‐31G(d) levels. As shown in the obtained results, the oxazaborolidine‐alkoxyborane adduct with a B? N? B? O four‐membered ring may be formed during the reduction of the carbonyl bond of the catalyst‐borane‐keto oxime ether adduct. The breakdown of the B? N? B? O four‐membered ring results in the formation of the adduct with a B? N? B? O? C? C? N seven‐membered ring and an oxime bond. The reduction of the oxime bond leads to the adduct with a chiral oxime carbon. The B(2)? N_{C? N} bond in the B? N? B? O? C? C? N seven‐membered ring of the adduct with a reduced oxime bond is weaker comparatively and thus may be more easily broken down. All the adducts have four stable structures. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 93: 294–306, 2003     

NIR‐Absorbing π‐Extended Azulene: Non‐Alternant Isomer of Terrylene Bisimide

The first planar π‐extended azulene that retains aromaticity of odd‐membered rings was synthesized by [3+3] peri‐annulation of two naphthalene imides at both long‐edge sides of azulene. Using bromination and subsequent nucleophilic substitution by methoxide and morpholine, selective functionalization of the π‐extended azulene was achieved. Whilst these new azulenes can be regarded as isomers of terrylene bisimide they exhibit entirely different properties, which include very narrow optical and electrochemical gaps. DFT, TD‐DFT, as well as nucleus‐independent chemical shift calculations were applied to explain the structural and functional properties of these new π scaffolds. Furthermore, X‐ray crystallography confirmed the planarity of the reported π‐scaffolds and aromaticity of their azulene moiety.     

How a Small Structural Difference Can Turn Optical Properties of π‐Extended Coumarins Upside Down: The Role of Non‐Innocent Saturated Rings

The fluorescence properties of two new families of heterocycles possessing either a seven‐ or five‐membered ring attached at the core molecule are entirely different in solution and in the solid state. Crystallization has the effect of inhibiting non‐radiative excited‐state deactivation pathways, operative in solution for the seven‐membered ring compounds, thus leading to significant fluorescence efficiency in the solid state, with quantum yields ranging from 0.10 to 0.36. Conversely, the five‐membered ring derivatives, which display notable emission properties in solution, are almost non‐emissive in the crystalline state, characterized by a long‐range π‐stacked arrangement. When embedded in polymeric films, both series show fluorescence features similar to the solution case, with remarkable fluorescence quantum yields ranging from 0.09 to 0.41. According to quantum chemical calculations, 3H‐chromeno[3,4‐c]pyridine‐4,5‐diones show the specific mechanism of fluorescence quenching. The derivatives bearing the seven‐membered ring undergo, in solution, a significant structural deformation in the excited state, resulting in a large decrease of the energy gap between S₁ and S₀ and hence to a substantial contribution of the internal conversion in the relaxation process. The fluorescence quenching of the five‐membered ring derivatives is in turn related to the intermolecular interaction between adjacent molecules prevailing to a greater extent in the crystal lattice.     

Bio‐Based Polyketones by Selective Ring‐Opening Radical Polymerization of α‐Pinene‐Derived Pinocarvone

The most abundant naturally occurring terpene, α‐pinene, which cannot be directly polymerized into high polymers by any polymerization method, was quantitatively converted under visible‐light irradiation into pinocarvone, which possesses a reactive exo methylene group. The bicyclic vinyl ketone was quantitatively polymerized in fluoroalcohols by selective (99 %) ring‐opening radical polymerization of the four‐membered ring, which results in unique polymers containing chiral six‐membered rings with conjugated ketone units in the main chain. These polymers display good thermal properties, optical activities, and contain reactive conjugated ketone units. Reversible addition fragmentation chain transfer (RAFT) polymerization was successfully accomplished by using appropriate trithiocarbonate RAFT agents, enabling the synthesis of thermoplastic elastomers based on controlled macromolecular architectures.     

Synthetic and Organocatalytic Studies of Quinidine Analogues with Ring‐Size Modifications in the Quinuclidine Moiety

Six highly enantiopure analogues of [2.2.2] were synthesized with five‐ or seven‐membered rings in the (original) quinuclidine skeleton. Five of these compounds were prepared through epoxide opening by a secondary cyclic amine, providing the nor‐ and homoquinuclidine moieties through five‐ and six‐membered ring formation. This method failed in the case of seven‐membered ring formation, so for that particular ring size a different synthetic route starting from 3‐quinuclidone was applied. The six novel analogues were examined as organocatalysts in four asymmetric conjugate addition reactions and the results compared with those of known cinchona alkaloid catalysts. This study shows that modification of the quinuclidine ring can have a substantial influence on catalyst activity and enantioselectivity. To acquire more insight into the characteristics of the new catalysts, the pK_aH values were determined by means of fluorescence spectroscopy. Furthermore, relative reaction rates of conjugate thiol additions reactions catalyzed by these quinidine analogues were measured through polarimetry.     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Base‐Selective Five‐ versus Six‐Membered Ring Annulation in Palladium‐Catalyzed C–C Coupling Cascade Reactions: New Access to Electron‐Poor Polycyclic Aromatic Dicarboximides

Palladium‐catalyzed base‐selective annulation of dibromonaphthalimide to different aryl boronate esters by combined Suzuki–Miyaura cross‐coupling and direct C−H arylation afforded a series of new five‐ and six‐membered ring annulated electron‐poor polycyclic aromatic hydrocarbons. Cesium carbonate (Cs₂CO₃) as auxiliary base in these C−C coupling cascade reactions led exclusively to six‐membered ring annulation, while the use of organic base diazabicycloundecene (DBU) afforded the corresponding five‐membered ring annulated products. This base‐dependent selective mode of annulation is attributed to different mechanistic pathways directed by the applied base. The selective annulation was revealed by single crystal X‐ray analysis of the respective five‐ and six‐membered ring annulated products. The optical and redox properties of the new polycyclic aromatic dicarboximides were characterized by UV/Vis absorption and fluorescence spectroscopy and cyclic voltammetry.     

Medium‐Sized‐Ring Analogues of Dibenzodiazepines by a Conformationally Induced Smiles Ring Expansion

Analogues of dibenzodiazepines, in which the seven‐membered nitrogen heterocycle is replaced by a 9–12‐membered ring, were made by an unactivated Smiles rearrangement of five‐ to eight‐membered heterocyclic anthranilamides. The conformational preference of the tertiary amide in the starting material leads to intramolecular migration of a range of aryl rings, even those lacking electron‐withdrawing activating groups, and provides a method for n →n +4 ring expansion. The medium‐ring products adopt a chiral ground state with an intramolecular, transannular hydrogen bond. The rate of interconversion of their enantiomeric conformers depends on solvent polarity. Ring size and adjacent steric hindrance modulate this hidden hydrophilicity, thus making this scaffold a good candidate for drug development.