Adsorption of chlorinated organic compounds from water with cerium oxide-activated carbon composite

Adsorptive removal of dichloromethane, chloroform, and carbon tetrachloride from aqueous solutions at 25 °C by activated carbon (AC) that was loaded with cerium oxide nanoparticles (CeO₂-NP/AC) was investigated. The developed adsorbent was characterized by scanning electron microscope (SEM), FTIR spectrophotometer, X-ray diffraction (XRD), and thermal gravimetric analysis (TGA). The effect of contact time, initial concentration, and the adsorbent dosage were also studied. The equilibrium and kinetics of adsorption were studied in a batch-type adsorption system, and the equilibrium experimental data were analyzed using Langmuir, Freundlich, and Temkin isotherm models. Freundlich adsorption isotherm showed the best fit for the equilibrium adsorption data. Three adsorption kinetic models, pseudo first- and second-order, and intraparticle diffusion models were applied to test the kinetic data. Kinetic characterization of the adsorption process onto CeO₂-NP/AC is well-described by the pseudo second-order model, and the adsorption best-fit by the intraparticle diffusion model. Our study shows that at optimum conditions, 82.72%, 99.40% and 89.42% of dichloromethane, chloroform, and tetrachloride, respectively, were removed by CeO₂-NP/AC, at concentration between 0.25 and 5.00 g/L.     

Nonlinear Analysis of the Kinetics and Equilibrium for Adsorptive Removal of Cd(II) by Starch Phosphate

In the present study, the nonlinear analysis method was used to evaluate the kinetics and equilibrium for Cd(II) adsorption on crosslinked starch phosphate (SP) from aqueous solution. The pseudo-first-order, pseudo-second-order and Elovich kinetic models were applied to test the kinetics experimental data, and the pseudo-first-order kinetic model provides a best correlation of the experimental data. Adsorption equilibrium data were fit by Langmuir, Freundlich, Dubinin-Radushkevich, and Sips isotherms. The results show that the data are best described by the Sips isotherms with a maximum adsorption capacity of 2.00 mmol/g. The effects of initial pH, and SP dose on the Cd(II) adsorption were also investigated. The adsorption capacities of Cd(II) on SP increase with the pH increasing from 2.0 to 8.0.     

PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES:ADSORPTION EQUILIBRIUM OF IRON(Ⅲ)ION

The adsorption of Fe(Ⅲ)ions from aqueous solution by chitosan alpha-ketoglutaric acid(KCTS)and hydroxamated chitosan alpha-ketoglutaric acid(HKCTS)was studied in a batch adsorption system.Experiments were carried out as function of pH,temperature,agitation rate and concentration of Fe(Ⅲ)ions.The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and isotherm constants were determined.The Langmuir model agrees very well with experimental data.The pseudo-first-order and second-order kinetic models were used to describe the kinetic data and the rate constants were evaluated.The dynamical data fit well with the second-order kinetic model.The pseudo second-order kinetic model was indicated with the activation energy of 19.61 and 7.98 KJ/mol for KCTS and HKCTS,respectively.It is suggested that the overall rate of Fe(Ⅲ)adsorption is likely to be controlled by the chemical process.Results also showed that novel chitosan derivatives(KCTS and HKCTS)were favorable adsorbents.     

PREPARATION AND CHARACTERIZATION OF NOVEL CHITOSAN DERIVATIVES: ADSORPTION EQUILIBRIUM OF IRON(Ⅲ) ION

The adsorption of Fe(Ⅲ)ions from aqueous solution by chitosan alpha-ketoglutaric acid(KCTS)and hydroxamated chitosan alpha-ketoglutaric acid(HKCTS)was studied in a batch adsorption system.Experiments were carried out as function of pH,temperature,agitation rate and concentration of Fe(Ⅲ)ions.The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and isotherm constants were determined.The Langmuir model agrees very well with experimental data.The pseudo-first-order and second-order kinetic models were used to describe the kinetic data and the rate constants were evaluated.The dynamical data fit well with the second-order kinetic model.The pseudo second-order kinetic model was indicated with the activation energy of 19.61 and 7.98 kJ/mol for KCTS and HKCTS,respectively.It is suggested that the overall rate of Fe(Ⅲ)adsorption is likely to be controlled by the chemical process.Results also showed that novel chitosan derivatives(KCTS and HKCTS)were favorable adsorbents.     

Diffusion Mechanisms of Biosorption of Cr(VI) onto Powdered Cotton Stalk

The present study investigates biosorption diffusion mechanism for the removal of toxic hexavalent chromium from aqueous solution using powdered cotton stalk an agricultural waste biomass. The effects of pH, temperature, adsorption isotherms, adsorption kinetics, and thermodynamic on chromium biosorption were investigated. The results showed that a maximum removal efficiency of 95% was achieved at pH 2. The pH at zero point charge (pH_zpc) on biosorbent surface was 4.3. The adsorption kinetics showed that the pseudo-second order rate expression fitted well the biosrption process. The equilibrium isotherm was measured experimentally and results were analyzed by Langmuir, Freundlich, and Temkin isotherms using linearized correlation coefficients. The significant parameters for isotherms were determined. The Langmuir adsorption isotherm relative to two other isotherms was found to fit the equilibrium data best for chromium adsorption. Thermodynamic studies reveal that the biosorption of Cr(VI) on cotton stalk was endothermic, spontaneous and occurs with increase in disorder at solid-liquid interface. Adsorption diffusion kinetic was further analyzed and showed that biosorption mechanism was totally controlled by intraparticle diffusion mechanism.     

Isotherm, kinetic and thermodynamic studies of lead and copper uptake by H2SO4 modified chitosan

The kinetic and thermodynamic adsorption and adsorption isotherms of Pb(II) and Cu(II) ions onto H₂SO₄ modified chitosan were studied in a batch adsorption system. The experimental results were fitted using Freundlich, Langmuir and Dubinin–Radushkevich isotherms; the Langmuir isotherm showed the best conformity to the equilibrium data. The pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models were employed to analyze the kinetic data. The adsorption behavior of Pb(II) and Cu(II) was best described by the pseudo-second order model. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were determined; the adsorption process was found to be both spontaneous and exothermic. No physical damage to the adsorbents was observed after three cycles of adsorption/desorption using EDTA and HCl as eluents. The mechanistic pathway of the Pb(II) and Cu(II) uptake was examined by means of Fourier transform infrared (FTIR) and Energy dispersive X-ray (EDX) spectroscopy. The equilibrium parameter (R_L) indicated that chitosan–H₂SO₄ was favorable for Pb(II) and Cu(II) adsorption.     

Theoretical,Equilibrium, Kinetics and Thermodynamic Investigations of Methylene Blue Adsorption onto Lignite Coal

The interaction of methylene blue (MB) dye with natural coal (collected from coal landfills of the Kosovo Energy Corporation) in aqueous solutions was studied using adsorption, kinetics, and thermodynamic data, and Monte Carlo (MC) calculations. In a batch procedure, the effects of contact duration, initial MB concentration, pH, and solution temperature on the adsorption process were examined. The Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R) isotherms were used to examine the equilibrium adsorption data. The equilibrium data fit well to the Freundlich and Langmuir adsorption isotherm models; however, the Freundlich model suited the adsorption data to a slightly better extent than the Langmuir model. The kinetics experimental data was fitted using pseudo-first-order, first-order, pseudo-second-order, second-order, Elvoich equation, and diffusion models. The pseudo-second-order rate model manifested a superlative fit to the experimental data, while the adsorption of MB onto coal is regulated by both liquid film and intraparticle diffusions at the same time. Thermodynamic parameters, such as Gibbs free energy (ΔG⁰), enthalpy (ΔH⁰), and entropy (ΔS⁰) were calculated. The adsorption of MB was confirmed to be spontaneous and endothermic. The theoretical results were in agreement with the experimental ones.     

壳聚糖对酸性艳橙GS的吸附平衡与动力学研究

研究了壳聚糖(CS)对水溶液中的酸性艳橙GS(ABO)染料的吸附性能,考察了温度、pH值、壳聚糖分子量对吸附性能的影响.不同温度下的动力学数据分别采用拟一级、拟二级、内扩散方程进行关联;不同温度下壳聚糖对酸性艳橙GS的吸附平衡数据分别用1angmuir、Freundlich、Tempkin模型拟合.结果表明:该吸附过程...     

Surface-bound humic acid increased rhodamine B adsorption on nanosized hydroxyapatite

In this study, humic acid-bound nanosized hydroxyapatite (HA-nHAP) was developed as a novel adsorbent, and the potential of using HA-nHAP for the adsorption of rhodamine B (RhB) from aqueous solution as functions of pH, adsorbent dosage, contact time, ionic strength, and temperature was investigated. The results indicated that the HA binding significantly increased the adsorption of RhB due to the introduction of abundant negatively charged functional groups. The adsorption capacity of HA-nHAP for RhB was found to be pH-dependent, and the optimal pH value was found to be 6.0. The adsorption equilibrium data obeyed Sips and Freundlich isotherms and the kinetic data were well described by the Elovich kinetic model. According to the Sips equation, the maximum adsorption capacity for RhB was 24.12 mg/g. The temperature and ionic strength experiment showed that they both had an effect on the adsorption capacity of HA-nHAP. Thermodynamic study confirmed that the adsorption was a spontaneous, endothermic, and more random arrangement process. The present investigation showed that HA-nHAP is a promising adsorbent for the removal of RhB from aqueous solution.     

Adsorption of Phenolic Compounds from Water on Activated Carbon: Prediction of Multicomponent Equilibrium Isotherms using Single-Component Data

Batch-type experiments were carried out to obtain equilibrium isotherms for the adsorption of phenol and m-cresol in aqueous solutions on activated carbon. Single solute systems, at 20 and 40^∘C, were tested for Langmuir, Freundlich and Sips adsorption isotherms in the range of concentrations up to 200 mg/L. Equilibrium data were more closely followed by the Freundlich and Sips equations for all cases. Adsorption isotherms for bisolute systems at 20^∘C, with two different initial concentrations of phenol and m-cresol, were predicted solely on the basis of single solute equilibrium parameters by using the equations of Butler and Ockrent and the IAS theory. The best agreement with the experimental loading values was afforded with the IAS theory based on Sips isotherm for pure compounds. However, this theory is found to be not able to predict with success the binary isotherms in this work where significant displacement of one solute by the other is observed. Chemical interactions in the adsorbed phase, estimated by a modified Butler–Ockrent model, can be responsible for this lack of success of the conventional IAS theory. The predictions based on the IAS theory are compared with the results of some empirical models.     

Adsorption of Methylene Blue from Aqueous Solution on High Lime Fly Ash: Kinetic,Equilibrium, and Thermodynamic Studies

Kinetic, equilibrium, and thermodynamic studies were performed for the batch adsorption of methylene blue (MB) on the high lime fly ash as a low cost adsorbent material. The studied operating variables were adsorbent amount, contact time, dye concentration, and temperature. The kinetic data were analyzed using the pseudo-first order and pseudo-second order kinetic models and the adsorption kinetic was followed well by the pseudo-second order kinetic model. The equilibrium data were fitted with the Freundlich, Langmuir, and Dubinin Radushkevich (D–R) isotherms and the equilibrium data were found to be well represented by the Freundlich and D–R isotherms. Based on these two isotherms MB is taken by chemical ion exchange and active sites on the high lime fly ash have different affinities to MB molecules. Various thermodynamic parameters such as enthalpy of adsorption (ΔH°), free energy change (ΔG°), and entropy change (ΔS°) were investigated. The positive value of ΔH° and negative value of ΔG° indicate that the adsorption is endothermic and spontaneous. The positive value of ΔS° shows the increased randomness at the solid–liquid interface during the adsorption. A single-stage batch adsorber was also designed based on the Freundlich isotherm for the removal of MB by the high lime fly ash.     

Immobilization of Lecitase® ultra on recyclable polymer support: application in resolution of trans-methyl (4-methoxyphenyl)glycidate in organic solvents

Lecitase® Ultra was immobilized on epoxy-activated polymer (DILBEAD-VWR) functionalized with polyethyleneimine via adsorption and crosslinking with glutaraldehyde. The resolution of methyl trans-(±)-3-(4-methoxyphenyl) glycidate was carried out in xylene (e.e. >99%, conversion 50%). The enzyme is not inhibited by the 4-methoxy phenyl acetaldehyde produced during hydrolysis and the immobilized enzyme with 7% moisture content works efficiently in an organic phase. While the immobilized enzyme can be recycled several times, the polymer support can also be recycled after removing the immobilized enzyme by washing with 1?M HCl.     

Adsorption of uranium(VI) from aqueous solution by diethylenetriamine-functionalized magnetic chitosan

In this paper, the modified magnetic chitosan resin containing diethylenetriamine functional groups (DETA-MCS) was used for the adsorption of uranium ions from aqueous solutions. The influence of experimental conditions such as contact time, pH value and initial uranium(VI) concentration was studied. The Langmuir, Freundlich, Sips and Dubinin–Radushkevich equations were used to check the fitting of adsorption data to the equilibrium isotherm. The best fit for U(VI) was obtained with the Sips model. Adsorption kinetics data were tested using pseudo-first-order and pseudo-second-order models. Kinetic studies showed that the adsorption followed the pseudo-second-order kinetic model, indicating that the chemical adsorption was the rate-limiting step. The present results suggest that DETA-MCS is an adsorbent for the efficient removal of uranium(VI) from aqueous solution.     

A concise enantioselective synthesis of 1,4-dideoxy-1,4-imino-d-arabinitol using Co(III)(salen)-catalyzed hydrolytic kinetic resolution of a two-stereocentered anti-azido epoxide

A concise enantioselective synthesis of 1,4-dideoxy-1,4-imino-d-arabinitol, (+)-DAB-1, has been described in good overall yield (18.1%) and with high enantiomeric purity (up to 98% ee) starting from a simple raw material, cis-2-butene-1,4-diol. The Co-catalyzed hydrolytic kinetic resolution of a two-stereocentered racemic azido epoxide followed by asymmetric dihydroxylation of the alkene and ‘one pot’ reductive cyclisation of the azido diol are key reactions in the synthetic sequence.     

Stearate as a green corrosion inhibitor of magnesium alloy ZE41 in sulfate medium

The efficiency of stearate as a corrosion inhibitor for magnesium alloy ZE41 has been studied in sodium sulfate medium, employing electrochemical techniques like potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results of polarization study imply that stearate functions as a mixed-type corrosion inhibitor with a predominant anodic control. The adsorption of stearate on alloy surface is found to obey the Langmuir adsorption isotherm. The proposed inhibition mechanism involved adsorption of stearate onto metal surface, followed by precipitation of magnesium stearate within the microdefects of Mg(OH)₂ surface film which enhanced the barrier effect of an otherwise porous partially protective film.     

Adsorption of direct dyes from aqueous solutions by carbon nanotubes: determination of equilibrium, kinetics and thermodynamics parameters

This study examined the feasibility of removing direct dyes C.I. Direct Yellow 86 (DY86) and C.I. Direct Red 224 (DR224) from aqueous solutions using carbon nanotubes (CNTs). The effects of dye concentration, CNT dosage, ionic strength and temperature on adsorption of direct dyes by CNTs were also evaluated. Pseudo second-order, intraparticle diffusion and Bangham models were adopted to evaluate experimental data and thereby elucidate the kinetic adsorption process. Additionally, this study used the Langmuir, Freundlich, Dubinin and Radushkevich (D-R) and Temkin isotherms to describe equilibrium adsorption. The adsorption percentage of direct dyes increased as CNTs dosage, NaCl addition and temperature increased. Conversely, the adsorption percentage of direct dyes decreased as dye concentration increased. The pseudo second-order model best represented adsorption kinetics. Based on the regressions of intraparticle diffusion and Bangham models, experimental data suggest that the adsorption of direct dyes onto CNTs involved intraparticle diffusion, but that was not the only rate-controlling step. The equilibrium adsorption of DR86 is best fitted in the Freundlich isotherm and that of DR224 was best fitted in the D-R isotherm. The capacity of CNTs to adsorb DY86 and DR224 was 56.2 and 61.3 mg/g, respectively. For DY86, enthalpy (DeltaH(0)) and entropy (DeltaS(0)) were 13.69 kJ/mol and 139.51 J/mol K, respectively, and those for DR224 were 24.29 kJ/mol and 172.06 J/mol K, respectively. The values of DeltaH(0), DeltaG(0) and E all indicate that the adsorption of direct dyes onto CNTs was a physisorption process.     

Chiral benzimidazoles and their applications in stereodiscrimination processes

Chiral aspects of benzimidazoles have been over-shadowed for a long time due to the large number of reports on benzimidazoles in the medical field in numerous categories of therapeutic agents. The vigorous research activity in chiral applications of benzimidazole derivatives started after bifunctional benzimidazoles made their appearance especially in the last 2–3 decades. Thus, chiral benzimidazoles form a comparatively young branch of chiral chemistry. The presence of pyridine and pyrrole type of nitrogens along with the fused benzene ring confer on this class of molecules, special properties including useful nucleophilicity, hydrogen bonding ability and a rigid backbone, all of which play decisive roles in proven chiral applications. The present review aims to cover the synthetic routes to access chiral benzimidazoles and their applications in a plethora of chiral fields including enantioselective organocatalysis, metal-based catalysis, asymmetric transformations involving benzimidazole-N-heterocyclic carbenes, kinetic resolution, benzimidazole-based macrocyclic hosts in chiral supramolecular chemistry and other miscellaneous chiral applications.     

Manganese Biosorption from Aqueous Solution by Penicillium camemberti Biomass in the Batch and Fix Bed Reactors: A Kinetic Study

Biosorption of manganese(II) using suspended and immobilized cells of fungal Penicillium camemberti (biomass) and nano-P. camemberti (nano-biomass) was studied by evaluating the physicochemical parameters of the solution such as initial manganese ion concentration, pH, temperature, dosage, and contact time in both batch system and fixed bed column. The maximum biosorption obtained from the batch process was 91.54 and 71.08 % for nano-biomass and biomass in initial concentration of 5 ppm, respectively. The Langmuir, Freundlich, Temkin, and BET isotherms isotherm models were used in the equilibrium modeling. The correlation coefficient of more than 0.90 turned out that the adsorption process of Mn(II) on biomass and nano-biomass were in accordance with both Langmuir and Freundlich isotherms. The sorption process followed a second-order rate kinetics indicating the process to be diffusion controlled. The results also demonstrate that an intra-particle diffusion mechanism plays a significant role in the sorption process. The structure of P. camemberti was characterized by FT-IR spectrums.     

Adsorption of acid dyes from aqueous solutions onto acid-activated bentonite

The adsorption of two dyes, namely, Acid Red 57 (AR57) and Acid Blue 294 (AB294), onto acid-activated bentonite in aqueous solution was studied in a batch system with respect to contact time, pH, and temperature. Acidic pH was favorable for the adsorption of these dyes. The surface characterization of acid-activated bentonite was performed using the FTIR technique. The pseudo-first-order and pseudo-second-order kinetic models and the intraparticle diffusion model were used to describe the kinetic data and the rate constants were evaluated. The dynamic data fitted the pseudo-second-order kinetic model well and also followed the intraparticle diffusion model up to 90 min, but diffusion is not the only rate controlling step. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms and the isotherm constants were determined. The Freundlich model agrees very well with experimental data. The activation energies of adsorption were also evaluated for the adsorption of AR57 and AB294 onto activated bentonite.