Active Electron Density Modulation of Co3O4-Based Catalysts Enhances their Oxygen Evolution Performance

Despite the fact that many strategies have been developed to improve the efficiency of the oxygen evolution reaction (OER), the precise modulation of the surface electronic properties of catalysts to improve their catalytic activity is still challenging. Herein, we demonstrate that the surface active electron density of Co₃O₄ can be effectively regulated by an argon-ion irradiation method. X-ray photoelectron and synchrotron x-ray absorption spectroscopy, UV photoelectron spectrometry, and DFT calculations show that the surface active electron density band center of Co₃O₄ has been upshifted, leading to a significantly enhanced absorption capability of the oxo group. The optimized Co₃O₄-based catalysts exhibit an excellent overpotential of 260 mV at 10 mA cm⁻² and Tafel slope of 54 mV dec⁻¹, superior to the capability of the benchmark RuO₂, representing one of the best Co-based OER catalysts. This approach could guide the future rational design and discovery of ideal electrocatalysts.     

Tailoring Oxygen Vacancy on Co3O4 Nanosheets with High Surface Area for Oxygen Evolution Reaction?

Electrochemical water splitting requires efficient water oxidation catalysts to accelerate the sluggish kinetics of water oxidation reaction. Here, we designed an efficient Co₃O₄ electrocatalyst using a pyrolysis strategy for oxygen evolution reaction (OER). Morphological characterization confirmed the ultra-thin structure of nanosheet. Further, the existence of oxygen vacancies was obviously evidenced by the X-ray photoelectron spectroscopy and electron spin resonance spectroscopy. The increased surface area of Co₃O₄ ensures more exposed sites, whereas generated oxygen vacancies on Co₃O₄ surface create more active defects. The two scenarios were beneficial for accelerating the OER across the interface between the anode and electrolyte. As expected, the optimized Co₃O₄ nanosheets can catalyze the OER efficiently with a low overpotential of 310 mV at current density of 10 mA/cm² and remarkable long-term stability in 1.0 mol/L KOH.     

Pomegranate‐Inspired Design of Highly Active and Durable Bifunctional Electrocatalysts for Rechargeable Metal–Air Batteries

Rational design of highly active and durable electrocatalysts for oxygen reactions is critical for rechargeable metal–air batteries. Herein, we report the design and development of composite electrocatalysts based on transition metal oxide nanocrystals embedded in a nitrogen‐doped, partially graphitized carbon framework. Benefiting from the unique pomegranate‐like architecture, the composite catalysts possess abundant active sites, strong synergetic coupling, enhanced electron transfer, and high efficiencies in the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The Co₃O₄‐based composite electrocatalyst exhibited a high half‐wave potential of 0.842 V for ORR, and a low overpotential of only 450 mV at the current density of 10 mA cm^?2 for OER. A single‐cell zinc–air battery was also fabricated with superior durability, holding great promise in the practical implementation of rechargeable metal–air batteries.     

Plasma‐Engraved Co3O4 Nanosheets with Oxygen Vacancies and High Surface Area for the Oxygen Evolution Reaction

Co₃O₄, which is of mixed valences Co²⁺ and Co³⁺, has been extensively investigated as an efficient electrocatalyst for the oxygen evolution reaction (OER). The proper control of Co²⁺/Co³⁺ ratio in Co₃O₄ could lead to modifications on its electronic and thus catalytic properties. Herein, we designed an efficient Co₃O₄‐based OER electrocatalyst by a plasma‐engraving strategy, which not only produced higher surface area, but also generated oxygen vacancies on Co₃O₄ surface with more Co²⁺ formed. The increased surface area ensures the Co₃O₄ has more sites for OER, and generated oxygen vacancies on Co₃O₄ surface improve the electronic conductivity and create more active defects for OER. Compared to pristine Co₃O₄, the engraved Co₃O₄ exhibits a much higher current density and a lower onset potential. The specific activity of the plasma‐engraved Co₃O₄ nanosheets (0.055 mA cm^?2_BET at 1.6 V) is 10 times higher than that of pristine Co₃O₄, which is contributed by the surface oxygen vacancies.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Synthesis of a Hierarchically Porous C/Co3O4 Nanostructure with Boron Doping for Oxygen Evolution Reaction

Fabricating a low‐cost and highly efficient electrocatalyst is of importance for the development of renewable energy devices. In this work, we have synthesized an ultrafine cobalt oxide nanocatalyst (5–10 nm) doped with boron (BC/Co₃O₄) by using a metal–organic framework as a precursor, which exhibits an excellent catalytic activity for oxygen evolution reaction (OER). Owing to the improvement of accessible active sites by boron doping, the synthesized catalyst can reach a current density of 10 mA cm^?2 at 1.54 V with a low overpotential of 310 mV, superior than those of commercial RuO₂ and N‐doped C/Co₃O₄. This work provides a facile way to develop highly efficient catalysts for electrochemical reactions.     

Dual Role of Silver Moieties Coupled with Ordered Mesoporous Cobalt Oxide towards Electrocatalytic Oxygen Evolution Reaction

Herein, we show that the performance of mesostructured cobalt oxide electrocatalyst for oxygen evolution reaction (OER) can be significantly enhanced by coupling of silver species. Various analysis techniques including pair distribution function and Rietveld refinement, X‐ray absorption spectroscopy at synchrotron as well as advanced electron microscopy revealed that silver exists as metallic Ag particles and well‐dispersed Ag₂O nanoclusters within the mesostructure. The benefits of this synergy are twofold for OER: highly conductive metallic Ag improves the charge transfer ability of the electrocatalysts while ultra‐small Ag₂O clusters provide the centers that can uptake Fe impurities from KOH electrolyte and boost the catalytic efficiency of Co–Ag oxides. The current density of mesostructured Co₃O₄ at 1.7 V_RHE is increased from 102 to 211 mA cm^?2 with incorporation of silver spices. This work presents the dual role of silver moieties and demonstrates a simple method to increase the OER activity of Co₃O₄.     

Strong‐Coupled Cobalt Borate Nanosheets/Graphene Hybrid as Electrocatalyst for Water Oxidation Under Both Alkaline and Neutral Conditions

Developing highly active catalysts for the oxygen evolution reaction (OER) is of paramount importance for designing various renewable energy storage and conversion devices. Herein, we report the synthesis of a category of Co‐Pi analogue, namely cobalt‐based borate (Co‐B_i) ultrathin nanosheets/graphene hybrid by a room‐temperature synthesis approach. Benefiting from the high surface active sites exposure yield, enhanced electron transfer capacity, and strong synergetic coupled effect, this Co‐B_i NS/G hybrid shows high catalytic activity with current density of 10 mA cm^?2 at overpotential of 290 mV and Tafel slope of 53 mV dec^?1 in alkaline medium. Moreover, Co‐B_i NS/G electrocatalysts also exhibit promising performance under neutral conditions, with a low onset potential of 235 mV and high current density of 14.4 mA cm^?2 at 1.8 V, which is the best OER performance among well‐developed Co‐based OER electrocatalysts to date. Our finding paves a way to develop highly active OER electrocatalysts.     

HfN Nanoparticles: An Unexplored Catalyst for the Electrocatalytic Oxygen Evolution Reaction

Water electrolysis is one of the most promising methods to produce H₂ and O₂ as high potential fuels. Comparing the two half‐reactions, the oxygen evolution reaction (OER) is the more difficult to be optimized and still relies on expensive noble metal‐based catalysts such as Ru or Ir. In this paper, we prepared nanoparticles of HfN and Hf₂ON₂ and tested them for the OER for the first time. The HfN sample, in particular, showed the highest activity, requiring an overpotential of only 358 mV at 10 mA cm^?2 in Fe‐free electrolyte and, above all, exhibiting long‐term stability. This result places this system amongst one of the most promising catalysts for OER tested to date, in terms of sustainability, activity and stability. The prepared nanoparticles are small (less than 15 nm in diameter), well‐defined in shape and crystalline, and were characterised before and after electrochemical testing also via electron microscopy (EM), powder X‐ray diffraction (PXRD) and X‐ray photoelectron spectroscopy (XPS).     

Controllable 1D and 2D Cobalt Oxide and Cobalt Selenide Nanostructures as Highly Efficient Electrocatalysts for the Oxygen Evolution Reaction

The relationship between controllable morphology and electrocatalytic activity of Co₃O₄ and CoSe₂ for the oxygen evolution reaction (OER) was explored in alkaline medium. Based on the time‐dependent growth process of cobalt precursors, 1D Co₃O₄ nanorods and 2D Co₃O₄ nanosheets were successfully synthesized through a facile hydrothermal process at 180 °C under different reaction times, followed by calcination at 300 °C for 2 h. Subsequently, 1D and 2D CoSe₂ nanostructures were derived by selenization of Co₃O₄, which achieved the controllable synthesis of CoSe₂ without templating agents. By comparing the electrocatalytic behavior of these cobalt‐based catalysts in 1 m KOH electrolyte toward the OER, both 2D Co₃O₄ and 2D CoSe₂ nanocrystals have lower overpotentials and better electrocatalytic stability than that of 1D nanostructures. The 2D CoSe₂ nanosheets require overpotentials of 372 mV to reach a current density of 50 mA cm⁻² with a small Tafel slope of 74 mV dec⁻¹. A systematic contrast of the electrocatalytic performances for the OER increase in the order: 1D Co₃O₄<2D Co₃O₄<1D CoSe₂<2D CoSe₂. This work provides fundamental insights into the morphology–performance relationships of both Co₃O₄ and CoSe₂, which were synthesized through the same approach, providing a solid guide for designing OER catalysts.     

Synthesis of 2D/2D Structured Mesoporous Co3O4 Nanosheet/N‐Doped Reduced Graphene Oxide Composites as a Highly Stable Negative Electrode for Lithium Battery Applications

Mesoporous Co₃O₄ nanosheets (Co₃O₄‐NS) and nitrogen‐doped reduced graphene oxide (N‐rGO) are synthesized by a facile hydrothermal approach, and the N‐rGO/Co₃O₄‐NS composite is formulated through an infiltration procedure. Eventually, the obtained composites are subjected to various characterization techniques, such as XRD, Raman spectroscopy, surface area analysis, X‐ray photoelectron spectroscopy (XPS), and TEM. The lithium‐storage properties of N‐rGO/Co₃O₄‐NS composites are evaluated in a half‐cell assembly to ascertain their suitability as a negative electrode for lithium‐ion battery applications. The 2D/2D nanostructured mesoporous N‐rGO/Co₃O₄‐NS composite delivered a reversible capacity of about 1305 and 1501 mAh g^?1 at a current density of 80 mA g^?1 for the 1st and 50th cycles, respectively. Furthermore, excellent cyclability, rate capability, and capacity retention characteristics are noted for the N‐rGO/Co₃O₄‐NS composite. This improved performance is mainly related to the existence of mesoporosity and a sheet‐like 2D hierarchical morphology, which translates into extra space for lithium storage and a reduced electron pathway. Also, the presence of N‐rGO and carbon shells in Co₃O₄‐NS should not be excluded from such exceptional performance, which serves as a reliable conductive channel for electrons and act as synergistically to accommodate volume expansion upon redox reactions. Ex‐situ TEM, impedance spectroscopy, and XPS, are also conducted to corroborate the significance of the 2D morphology towards sustained lithium storage.     

A Surface‐Oxide‐Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton‐coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm^?2 at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface‐oxide‐rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen‐containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

Metallic Co4N Porous Nanowire Arrays Activated by Surface Oxidation as Electrocatalysts for the Oxygen Evolution Reaction

Designing highly efficient electrocatalysts for oxygen evolution reaction (OER) plays a key role in the development of various renewable energy storage and conversion devices. In this work, we developed metallic Co₄N porous nanowire arrays directly grown on flexible substrates as highly active OER electrocatalysts for the first time. Benefiting from the collaborative advantages of metallic character, 1D porous nanowire arrays, and unique 3D electrode configuration, surface oxidation activated Co₄N porous nanowire arrays/carbon cloth achieved an extremely small overpotential of 257 mV at a current density of 10 mA cm⁻², and a low Tafel slope of 44 mV dec⁻¹ in an alkaline medium, which is the best OER performance among reported Co‐based electrocatalysts to date. Moreover, in‐depth mechanistic investigations demonstrate the active phases are the metallic Co₄N core inside with a thin cobalt oxides/hydroxides shell during the OER process. Our finding introduces a new concept to explore the design of high‐efficiency OER electrocatalysts.     

Controlled Synthesis of Cr‐Co0.85Se Nanoarrays for Water Splitting at an Ultralow Cell Voltage of 1.43 V

Water splitting has attracted more and more attention as a promising strategy for the production of clean hydrogen fuel. In this work, a new synthesis strategy was proposed, and Co_0.85Se was synthesized on nickel foam as the main matrix. The doping of appropriate Cr amount into the target of Co_0.85Se and the Cr‐Co_0.85Se resulted in an excellent electrochemical performance. The doping of Cr introduces Cr³⁺ ions which substitute Co²⁺ and Co³⁺ ions in Co_0.85Se, so that the lattice parameters of the main matrix were changed. It is worth noting that the Cr0.15‐Co_0.85Se/NF material exhibits an excellent performance in the oxygen evolution reaction (OER) test. When the current density reaches 50 mA cm^?2 for OER, the overpotential is only 240 mV. For the hydrogen evolution reaction (HER) tests, the overpotential is only 117 mV to drive 10 mA cm^?2 of current density. Moreover, when the Cr0.15‐Co_0.85Se/NF material is used as a two‐electrode device for whole water splitting, the required cell voltage is only 1.43 V to reach a current density of 10 mA cm^?2, which is among the lowest values of the published catalysts up to now. In addition, the Cr0.15‐Co_0.85Se/NF catalyst also exhibits excellent stability during a long period of water splitting. The experimental result demonstrates that the change of the lattice structure has an obvious influence on the electrocatalytic activity of the material. When an external electric field is applied, it facilitates the rapid electron transfer rate and enhances the electrocatalytic performance and stability of the material.     

Electrodeposited Cobalt‐Phosphorous‐Derived Films as Competent Bifunctional Catalysts for Overall Water Splitting

One of the challenges to realize large‐scale water splitting is the lack of active and low‐cost electrocatalysts for its two half reactions: H₂ and O₂ evolution reactions (HER and OER). Herein, we report that cobalt‐phosphorous‐derived films (Co‐P) can act as bifunctional catalysts for overall water splitting. The as‐prepared Co‐P films exhibited remarkable catalytic performance for both HER and OER in alkaline media, with a current density of 10 mA cm^?2 at overpotentials of ?94 mV for HER and 345 mV for OER and Tafel slopes of 42 and 47 mV/dec, respectively. They can be employed as catalysts on both anode and cathode for overall water splitting with 100 % Faradaic efficiency, rivalling the integrated performance of Pt and IrO₂. The major composition of the as‐prepared and post‐HER films are metallic cobalt and cobalt phosphide, which partially evolved to cobalt oxide during OER.     

Hermetically Coated and Well‐Separated Co3O4 Nanophase within Porous Graphitic Carbon Nanosheets: Synthesis,Confinement Effect,and Improved Lithium‐Storage Capacity and Durability

Considerable lithium‐driven volume changes and loss of crystallinity on cycling have impeded the sustainable use of transition metal oxides (MOs) as attractive anode materials for advanced lithium‐ion batteries that have almost six times the capacity of carbon per unit volume. Herein, Co₃O₄ was used as a model MO in a facile process involving two pyrolysis steps for in situ encapsulation of nanosized MO in porous two‐dimensional graphitic carbon nanosheets (2D‐GCNs) with high surface areas and abundant active sites to overcome the above‐mentioned problems. The proposed method is inexpensive, industrially scalable, and easy to operate with a high yield. TEM revealed that the encaged Co₃O₄ is well separated and uniformly dispersed with surrounding onionlike graphitic layers. By taking advantage of the high electronic conductivity and confinement effect of the surrounding 2D‐GCNs, a hierarchical GCNs‐coated Co₃O₄ (Co₃O₄@GCNs) anode with 43.5 wt % entrapped active nanoparticles delivered a remarkable initial specific capacity of 1816 mAh g^?1 at a current density of 100 mA g^?1. After 50 cycles, the retained capacity is as high as 987 mAh g^?1. When the current density was increased to 1000 mA g^?1, the anode showed a capacity retention of 416 mAh g^?1. Enhanced reversible rate capability and prolonged cycling stability were found for Co₃O₄@GCN compared to pure GCNs and Co₃O₄. The Co₃O₄@GCNs hybrid holds promise as an efficient candidate material for anodes due to its low cost, environmentally friendly nature, high capacity, and stability.     

Grafting Molecular Cobalt‐oxo Cubane Catalyst on Polymeric Carbon Nitride for Efficient Photocatalytic Water Oxidation

In this work, we have successfully constructed a cobalt–oxo (Co^III₄O₄) cubane complex on polymeric carbon nitride (PCN) through pyridine linkage. The covalently grafted Co^III₄O₄ cubane units were uniformly distributed on the PCN surface. The product exhibited greatly enhanced photocatalytic activities for water oxidation under visible‐light irradiation. Further characterizations and spectroscopic analyses revealed that the grafted Co^III₄O₄ cubane units could effectively capture the photogenerated holes from excited PCN, lower the overpotential of oxygen evolution reaction (OER), and serve as efficient catalysts to promote the multi‐electron water oxidation process. This work provides new insight into the future development of efficient photocatalysts by grafting molecular catalysts for artificial photosynthesis.     

Bimetallic Metal‐Organic Framework‐Derived Nanosheet‐Assembled Nanoflower Electrocatalysts for Efficient Oxygen Evolution Reaction

Non‐noble metal‐based metal–organic framework (MOF)‐derived electrocatalysts have recently attracted great interest in the oxygen evolution reaction (OER). Here we report a facile synthesis of nickel‐based bimetallic electrocatalysts derived from 2D nanosheet‐assembled nanoflower‐like MOFs. The optimized morphologies and large Brunauer–Emmett–Teller (BET) surface area endow FeNi@CNF with efficient OER performance, where the aligned nanosheets can expose abundant active sites and benefit electron transfer. The complex nanoflower morphologies together with the synergistic effects between two metals attributed to the OER activity of the Ni‐based bimetallic catalysts. The optimized FeNi@CNF afforded an overpotential of 356 mV at a current density of 10 mA cm^?2 with a Tafel slope of 62.6 mV dec^?1, and also exhibited superior durability with only slightly degradation after 24 hours of continuous operation. The results may inspire the use of complex nanosheet‐assembled nanostructures to explore highly active catalysts for various applications.     

Coupling Magnetic Single‐Crystal Co2Mo3O8 with Ultrathin Nitrogen‐Rich Carbon Layer for Oxygen Evolution Reaction

Transition‐metal oxides as electrocatalysts for the oxygen evolution reaction (OER) provide a promising route to face the energy and environmental crisis issues. Although palmeirite oxide A₂Mo₃O₈ as OER catalyst has been explored, the correlation between its active sites (tetrahedral or octahedral) and OER performance has been elusive. Now, magnetic Co₂Mo₃O₈@NC‐800 composed of highly crystallized Co₂Mo₃O₈ nanosheets and ultrathin N‐rich carbon layer is shown to be an efficient OER catalyst. The catalyst exhibits favorable performance with an overpotential of 331 mV@10 mA cm^?2 and 422 mV@40 mA cm^?2, and a full water‐splitting electrolyzer with it as anode catalyst shows a cell voltage of 1.67 V@10 mA cm^?2 in alkaline. Combined HAADFSTEM, magnetic, and computational results show that factors influencing the OER performance can be attributed to the tetrahedral Co sites (high spin, t₂³e⁴), which improve the OER kinetics of rate‐determining step to form *OOH.     

Environment friendly hydrothermal synthesis of carbon–Co_3O_4 nanorods composite as an efficient catalyst for oxygen evolution reaction

The design of cost-effective, highly active catalysts for hydrogen energy production is a vital element in the societal pursuit of sustainable energy. Water electrolysis is one of the most convenient processes to produce high purity hydrogen. Cobalt-based catalysts are well-known electrocatalysts for oxygen evolution reaction(OER). In this article, all these merits indicate that the present cobalt nanocomposite is a promising electrocatalyst for OER. C–Co_3O_4-nanorods catalyst with nanorod structure was synthesized by hydrothermal treatment of CoCl_2·6H_2O/dextrose/urea mixture at 180 °C for 18 h and then calcined at400 °C for 3.5 h. The role of dextrose percentage in solution to achieve the uniform coating of carbon on the surface of Co_3O_4-nanorods has been demonstrated. The prepared materials were characterized by X-ray diffraction(XRD), X-ray photoelectron spectrum(XPS), field emission scanning electron microscopy(FE-SEM), high-resolution transmission electron microscopy(HR-TEM), and Brunauer–Emmett–Teller instrument(BET). Due to its unique morphology, the C–Co_3O_4-nanorods catalyst exhibited better activity than Co_3O_4-microplates catalyst for OER in 1 M KOH aqueous solution. The results showed a highly efficient, scalable, and low-cost method for developing highly active and stable OER electrocatalysts in alkaline solution.