A Supramolecular-Based Dual-Wavelength Phototherapeutic Agent with Broad-Spectrum Antimicrobial Activity Against Drug-Resistant Bacteria

With the ever-increasing threat posed by the multi-drug resistance of bacteria, the development of non-antibiotic agents for the broad-spectrum eradication of clinically prevalent superbugs remains a global challenge. Here, we demonstrate the simple supramolecular self-assembly of structurally defined graphene nanoribbons (GNRs) with a cationic porphyrin (Pp4N) to afford unique one-dimensional wire-like GNR superstructures coated with Pp4N nanoparticles. This Pp4N/GNR nanocomposite displays excellent dual-modal properties with significant reactive-oxygen-species (ROS) production (in photodynamic therapy) and temperature elevation (in photothermal therapy) upon light irradiation at 660 and 808 nm, respectively. This combined approach proved synergistic, providing an impressive antimicrobial effect that led to the complete annihilation of a wide spectrum of Gram-positive, Gram-negative, and drug-resistant bacteria both in vitro and in vivo. The study also unveils the promise of GNRs as a new platform to develop dual-modal antimicrobial agents that are able to overcome antibiotic resistance.     

Rationally Designed α‐Helical Broad‐Spectrum Antimicrobial Peptides with Idealized Facial Amphiphilicity

A series of 12‐amino acid peptide analogs is designed using point mutation strategy based on an α‐helical peptide template. The first mutation in the series, KL12, has an idealized facial amphiphilicity. Subsequent mutations are performed to increase hydrophobic or cationic contents. Idealized facial amphiphilicity show enhanced antimicrobial activity and selectivity against most of the tested microbes. Increasing hydrophobic contents further enhance antimicrobial potency; however, selectivity of the most hydrophobic analog is impaired due to non‐specific interactions with mammalian cell membrane. This study demonstrates that facial amphiphilicity and hydrophobic content are strongly correlated with antimicrobial activity and selectivity of antimicrobial peptides.     

Reduced Graphene Oxide Functionalized with a Luminescent Rare‐Earth Complex for the Tracking and Photothermal Killing of Drug‐Resistant Bacteria

An antibacterial platform based on multifunctional reduced graphene oxide (rGO) that is responsive to near‐infrared (NIR) light has been constructed. By introducing a luminescent Eu³⁺ complex and vancomycin for bacteria tracking into one system, this platform could specifically recognize and light up bacteria. Antibacterial activity of this nanoscale construction under NIR illumination was investigated. Upon illumination with NIR light, this nanoscale architecture generates great heat locally, resulting in the death of drug‐resistant bacteria. These results indicate that the ability of this nanoscale platform to kill drug‐resistant bacteria has great potential for clinical pathogenic bacteria diagnosis and treatment.     

Elucidation of the Active Conformation of Vancomycin Dimers with Antibacterial Activity against Vancomycin‐Resistant Bacteria

Covalently linked vancomycin dimers have attracted a great deal of attention among researchers because of their enhanced antibacterial activity against vancomycin‐resistant strains. However, the lack of a clear insight into the mechanisms of action of these dimers hampers rational optimization of their antibacterial potency. Here, we describe the synthesis and antibacterial activity of novel vancomycin dimers with a constrained molecular conformation achieved by two tethers between vancomycin units. Conformational restriction is a useful strategy for studying the relationship between the molecular topology and biological activity of compounds. In this study, two vancomycin units were linked at three distinct positions of the glycopeptide (vancosamine residue (V), C terminus (C), and N terminus (N)) to form two types of novel vancomycin cyclic dimers. Active NC‐VV‐linked dimers with a stable conformation as indicated by molecular mechanics calculations selectively suppressed the peptidoglycan polymerization reaction of vancomycin‐resistant Staphylococcus aureus in vitro. In addition, double‐disk diffusion tests indicated that the antibacterial activity of these dimers against vancomycin‐resistant enterococci might arise from the inhibition of enzymes responsible for peptidoglycan polymerization. These findings provide a new insight into the biological targets of vancomycin dimers and the conformational requirements for efficient antibacterial activity against vancomycin‐resistant strains.     

A One‐Step Process for the Antimicrobial Finishing of Textiles with Crystalline TiO2 Nanoparticles

Titanium oxide (TiO₂) nanoparticles (NPs) in their two forms, anatase and rutile, were synthesized and deposited onto the surface of cotton fabrics by using ultrasonic irradiation. The structure and morphology of the nanoparticles were analyzed by using characterization methods such as XRD, TEM, STEM, and EDS. The antimicrobial activities of the TiO₂–cotton composites were tested against Escherichia coli (Gram‐negative) and Staphylococcus aureus (Gram‐positive) strains, as well as against Candida albicans. Significant antimicrobial effect was observed, mainly against Staphylococcus aureus. In addition, the combination of visible light and TiO₂ NPs showed enhanced antimicrobial activity.     

Antimicrobial Activity of Novel Tetra‐ and Penta‐azaheterocyclic Ring Systems

A novel series of substituted [1,2,4]triazolo[4′,3′:1,2]pyrimido[4,5‐c ]benzo[f ]isoquinolin‐14(10H )‐one was synthesized from the reaction of hydrazonoyl chlorides with pyrimidine thione derivative or via oxidative cyclization of 3‐(2‐substituted‐benzylidene‐hydrazinyl)‐7,8‐dihydrobenzo[f ]pyrimido[4,5‐c ]isoquinolin‐1(2H )‐one. Also, some polyhetero‐cyclic ring systems were prepared through the reaction of 2‐dimethylaminomethylene‐3,4‐dihydro‐2H‐naphthalen‐1‐one and heterocyclic amines. The biological activity of some new products was evaluated, and the results obtained revealed that compounds 10e , 13a , and 18 showed excellent activities against the most bacteria and fungi species used.     

A Cobalt Metallacrown Anion Host with Guest‐Dependent Redox Activity

Two bowl‐shaped cavities , each having three OH^? hydrogen‐bond donors at its base, are present in double‐cone‐shaped metallacrown anion host [Co₆(μ‐OH)₆(μ‐L)₆]^m+ ( 1 ^{m +} ; HL=3{5}‐(pyrid‐2‐yl)‐5{3}‐(tert‐butyl)pyrazole). Depending on its affinity for the anions present, it can be isolated in its Co^III₃Co^II₃ (m=3; e.g., 1 (ClO₄)₃) and Co^III₂Co^II₄ (m=2; e.g., 1 (BF₄)₂ ? n H₂O) oxidation states. See picture for photographs of isolated salts.

     

A Self‐Standing and Flexible Electrode of Yolk–Shell CoS2 Spheres Encapsulated with Nitrogen‐Doped Graphene for High‐Performance Lithium‐Ion Batteries

Flexible lithium‐ion batteries (LIBs) have recently attracted increasing attention with the fast development of bendable electronic systems. Herein, a facile and template‐free solvothermal method is presented for the fabrication of hybrid yolk–shell CoS₂ and nitrogen‐doped graphene (NG) sheets. The yolk–shell architecture of CoS₂ encapsulated with NG coating is designed for the dual protection of CoS₂ to address the structural and interfacial stability concerns facing the CoS₂ anode. The as‐prepared composite can be assembled into a film, which can be used as a binder‐free and flexible electrode for LIBs that does not require any carbon black conducting additives or current collectors. When evaluating lithium‐storage properties, such a flexible electrode exhibits a high specific capacity of 992 mAh g^?1 in the first reversible discharge capacity at a current rate of 100 mA g^?1 and high reversible capacity of 882 mAh g^?1 after 150 cycles with excellent capacity retention of 89.91 %. Furthermore, a reversible capacity as high as 655 mAh g^?1 is still achieved after 50 cycles even at a high rate of 5 C due to the yolk–shell structure and NG coating, which not only provide short Li‐ion and electron pathways, but also accommodate large volume variation.     

Homogeneous Electrochemical Assay for Real‐time Monitoring of Exonuclease III Activity Based on a Graphene Monolayer

A homogeneous electrochemical assay based on a graphene monolayer electrode was developed for simple, sensitive, rapid and quantitative analysis of the exonuclease III (Exo III) activity. The method utilized a methylene blue (MB) tagged DNA substrate with hairpin structure, and a graphene monolayer attached on the working electrode. Before digestion, the hairpin structure prevents the adsorption of the DNA substrate to the graphene surface. Degradation of the substrate by the 3′–5′ Exo III, however, yields single‐stranded DNA (ssDNA), resulting in its subsequent binding to the graphene surface through π‐π stacking, which produces the voltammetric current from electrochemical reduction of the MB tag anchoring at the end of ssDNA. A direct quantification of the Exo III activity can be achieved by measuring the reductive peak current of the MB tag under easily attainable potential (∼ −0.1 V vs Ag/AgCl) range comparably sensitive to the conventional methods such as a gel‐based or fluorescence‐based assays. Our approach can be applied to measure various exonucleases activity by adjusting the structure of DNA substrate suggesting a new assay method in drug screening and basic research related to the enzymes.     

Enhanced Electrocatalytic Activity of Dual Template Based Pt/Cu‐zeolite A/Graphene for Methanol Electrooxidation

A novel Pt/Cu‐zeolite A/graphene based electrocatalyst was successfully prepared by chemical reduction method for methanol electrooxidation. Graphite oxide and Cu functionalized zeolite A were simultaneously reduced by NaBH₄ to prepare Cu‐zeolite A/graphene support which was used to deposit Pt nanoparticles. The nanostructure and composition of as‐prepared Pt/Cu‐zeolite A/graphene composites were characterized by X‐ray diffractometer, X‐ray fluorescence, Fourier transform infrared spectrometer and scanning electron microscopy. The electrocatalytic properties of Pt/Cu‐zeolite A/graphene modified electrode for methanol oxidation were investigated by cyclic voltammetry and chronoamperometry in 0.10 mol/L H₂SO₄ + 0.50 mol/L CH₃OH solution. Compared with Pt/zeolite A/graphene electrode and Pt/graphene electrode, Pt/Cu‐zeolite A/graphene based electrode exhibited obviously enhanced current and higher electrocatalytic activity for methanol electrooxidation. The increased electrocatalytic activity was attributed to the presence of zeolite A and reduced graphene oxide based dual template, which significantly increased the effective electrode surface and facilitated the diffusion of analytes into the electroactive catalyst.     

Synthetic Mimics of Antimicrobial Peptides—A Versatile Ring‐Opening Metathesis Polymerization Based Platform for the Synthesis of Selective Antibacterial and Cell‐Penetrating Polymers

Natural macromolecules exhibit an extensive arsenal of properties, many of which have proven difficult to recapitulate in simpler synthetic systems. Over the last couple of years, foldamers have emerged as one important step toward increased functionality in synthetic systems. While the great majority of work in this area has focused on folded structures, hence the name, more recent progress has centered on polymers that mimic protein function. These efforts have resulted in the design of relatively simple macromolecules; one example are the synthetic mimics of antimicrobial peptides (SMAMPs) that capture the central physicochemical features of their natural archetypes irrespective of the specific folded form. Here we present our recent efforts to create polymers which display biological activity similar to natural proteins, including antimicrobial and cell‐penetrating peptides.     

A Ternary Composite Based on Graphene,Hemin, and Gold Nanorods with High Catalytic Activity for the Detection of Cell‐Surface Glycan Expression

A novel graphene‐family ternary composite with high catalytic activity has been developed by using simple synthetic methods. The graphene‐based ternary composite has abundant positively charged Au NRs, which greatly improved the catalytic properties of the graphene‐family of peroxidase mimetics, because of the high electron‐transfer rate of graphene and the synergistic interaction of three components. Sensitive detection of glycan expression on K562 cell surface can be achieved with a low detection limit of 10 cells. This finding constitutes a novel graphene‐family hybrid nanomaterials‐based peroxidase mimetic that is expected to be applied widely in the construction of simple, sensitive, and selective biosensors for nucleic acids and proteins both inside and outside of cells through catalytic reaction of H₂O₂.     

CeO2‐Based Pd(Pt) Nanoparticles Grafted onto Fe3O4/Graphene: A General Self‐Assembly Approach To Fabricate Highly Efficient Catalysts with Magnetic Recyclable Capability

New Pd(Pt) catalysts have been fabricated by assembling multicomponents of Fe₃O₄ and CeO₂/Pd(Pt) on the surface of reduced graphene oxide (RGO) nanosheets in layers. The as‐obtained Pd(Pt) catalysts exhibit extremely high catalytic activity in the selective hydrogenation reaction of nitrobenzene. Owing to the presence of Fe₃O₄, the catalysts can be easily recycled from the catalytic system through magnetic separation. Their high activity, stability, and magnetic recyclability make the as‐obtained hybrids very promising as catalysts in catalytic applications. Compared to other traditional multishell magnetic catalysts that were prepared by means of layer‐by‐layer technology, our process is much more facile and more easily controlled.     

Sensitive Voltammetric Determination of Bisphenol A Based on a Glassy Carbon Electrode Modified with Copper Oxide‐Zinc Oxide Decorated on Graphene Oxide

A highly sensitive and selective chemical sensor was prepared based on metallic copper‐copper oxides and zinc oxide decorated graphene oxide modified glassy carbon electrode (Cu?Zn/GO/GCE) through an easily electrochemical method for the quantification of bisphenol A (BPA). The composite electrode was characterized via scanning electron microscopy (SEM), X‐Ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). The electrochemical behavior of BPA in Britton‐Robinson (BR) buffer solution (pH 7.1) was examined using cyclic voltammetry (CV). Under optimized conditions, the square wave voltammetry (SWV) response of Cu?Zn/GO/GCE towards BPA indicates two linear relationships within concentrations (3.0 nmol L^?1?0.1 μmol L^?1 and 0.35 μmol L^?1?20.0 μmol L^?) and has a low detection limit (0.88 nmol L^?1). The proposed electrochemical sensor based on Cu?Zn/GO/GCE is both time and cost effective, has good reproducibility, high selectivity as well as stability for BPA determination. The developed composite electrode was used to detect BPA in various samples including baby feeding bottle, pacifier, water bottle and food storage container and satisfactory results were obtained with high recoveries.