Crystal-to-Crystal Synthesis of Helically Ordered Polymers of Trehalose by Topochemical Polymerization

The synthesis of crystalline helical polymers of trehalose via topochemical azide–alkyne cycloaddition (TAAC) of a trehalose-based monomer is presented. An unsymmetrical trehalose derivative having azide and alkyne crystallizes in two different forms having almost similar packing. Upon heating, both the crystals undergo TAAC reaction to form crystalline polymers. Powder X-ray diffraction (PXRD) studies revealed that the monomers in both the crystals polymerize in a crystal-to-crystal fashion; circular dichroism (CD) studies of the product crystals revealed that the formed polymer is helically ordered. This solvent-free, catalyst-free polymerization method that eliminates the tedious purification of the polymeric product exemplifies the advantage of topochemical polymerization reaction over traditional solution-phase polymerization.     

Synthesis and Reversible Hydration of a Pseudoprotein,a Fully Organic Polymeric Desiccant by Multiple Single‐Crystal‐to‐Single‐Crystal Transformations

A diphenylalanine derivative, N3‐Phe‐Phe‐NHCH2CCH, was designed for topochemical azide–alkyne cycloaddition (TAAC) polymerization. This dipeptide adopted β‐sheet arrangement as designed, in its crystals, but the azide and alkyne were not fitly aligned for their topochemical reaction. However, the voids present around these groups allowed them to attain a reactive geometry upon heating and their consequent TAAC polymerization to a pseudoprotein in a single‐crystal‐to‐single‐crystal (SCSC) fashion. This motion led to the creation of channels in the product crystal and it absorbed water from the surroundings to fill these channels as H‐bonded water wire. The pseudoprotein undergo reversible hydration/dehydration in SCSC fashion many times under mild conditions: hydration at low relative humidity and dehydration at low temperature. Vapor sorption analyses suggest that this fully organic polymer might be useful as an energy‐efficient desiccant material for controlling indoor humidity.     

Synthesis and Reversible Hydration of a Pseudoprotein,a Fully Organic Polymeric Desiccant by Multiple Single‐Crystal‐to‐Single‐Crystal Transformations

A diphenylalanine derivative, N3‐Phe‐Phe‐NHCH2CCH, was designed for topochemical azide–alkyne cycloaddition (TAAC) polymerization. This dipeptide adopted β‐sheet arrangement as designed, in its crystals, but the azide and alkyne were not fitly aligned for their topochemical reaction. However, the voids present around these groups allowed them to attain a reactive geometry upon heating and their consequent TAAC polymerization to a pseudoprotein in a single‐crystal‐to‐single‐crystal (SCSC) fashion. This motion led to the creation of channels in the product crystal and it absorbed water from the surroundings to fill these channels as H‐bonded water wire. The pseudoprotein undergo reversible hydration/dehydration in SCSC fashion many times under mild conditions: hydration at low relative humidity and dehydration at low temperature. Vapor sorption analyses suggest that this fully organic polymer might be useful as an energy‐efficient desiccant material for controlling indoor humidity.     

Single-crystal-to-single-crystal synthesis of a pseudostarch via topochemical azide–alkyne cycloaddition polymerization

There is high demand for polysaccharide-mimics as enzyme-stable substitutes for polysaccharides for various applications. Circumventing the problems associated with the solution-phase synthesis of such polymers, we report here the synthesis of a crystalline polysaccharide-mimic by topochemical polymerization. By crystal engineering, we designed a topochemically reactive crystal of a glucose-mimicking monomer decorated with azide and alkyne units. In the crystal, the monomers arrange in head-to-tail fashion with their azide and alkyne groups in a ready-to-react antiparallel geometry, suitable for their topochemical azide–alkyne cycloaddition (TAAC) reaction. On heating the crystals, these pre-organized monomer molecules undergo regiospecific TAAC polymerization, yielding 1,4-triazolyl-linked pseudopolysaccharide (pseudostarch) in a single-crystal-to-single-crystal manner. This crystalline pseudostarch shows better thermal stability than its amorphous form and many natural polysaccharides.

Prudent crystal engineering allows head-to-tail arrangement of inositol monomer molecules pre-organizing azide and alkyne units of adjacent monomers in a ready-to-react manner. On heating regiospecific SCSC polymerization yields a starch-like polymer.     

β‐Sheet to Helical‐Sheet Evolution Induced by Topochemical Polymerization: Cross‐α‐Amyloid‐like Packing in a Pseudoprotein with Gly‐Phe‐Gly Repeats

Protein‐mimics are of great interest for their structure, stability, and properties. We are interested in the synthesis of protein‐mimics containing triazole linkages as peptide‐bond surrogate by topochemical azide‐alkyne cycloaddition (TAAC) polymerization of azide‐ and alkyne‐modified peptides. The rationally designed dipeptide N₃‐CH₂CO‐Phe‐NHCH₂CCH ( 1 ) crystallized in a parallel β‐sheet arrangement and are head‐to‐tail aligned in a direction perpendicular to the β‐sheet‐direction. Upon heating, crystals of 1 underwent single‐crystal‐to‐single‐crystal polymerization forming a triazole‐linked pseudoprotein with Gly‐Phe‐Gly repeats. During TAAC polymerization, the pseudoprotein evolved as helical chains. These helical chains are laterally assembled by backbone hydrogen bonding in a direction perpendicular to the helical axis to form helical sheets. This interesting helical‐sheet orientation in the crystal resembles the cross‐α‐amyloids, where α‐helices are arranged laterally as sheets.     

Designed Synthesis of a 1D Polymer in Twist‐Stacked Topology via Single‐Crystal‐to‐Single‐Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist‐stacked topology, we designed a peptide monomer HC≡CCH₂‐NH‐Ile‐Leu‐N₃, which crystallizes with its molecules H‐bonded along a six‐fold screw axis. These H‐bonded columns pack parallelly such that molecules arrange head‐to‐tail, forming linear non‐covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist‐stack along the screw axis. Crystals of this monomer, on heating, undergo single‐crystal‐to‐single‐crystal (SCSC) topochemical azide–alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4‐triazole‐linked polymer in a twist‐stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre‐decided topologies.     

Synthesis of Triazole‐linked Homonucleoside Polymers through Topochemical Azide–Alkyne Cycloaddition

There is a great deal of interest in developing stable modified nucleic acids for application in diverse fields. Phosphate‐modified DNA analogues, in which the phosphodiester group is replaced with a surrogate group, are attractive because of their high stability and resistance to nucleases. However, the scope of conventional solution or solid‐phase DNA synthesis is limited for making DNA analogues with unnatural linkages. Other limitations associated with conventional synthesis include difficulty in making larger polymers, poor yield, incomplete reaction, and difficult purification. To circumvent these problems, a single‐crystal‐to‐single‐crystal (SCSC) synthesis of a 1,5‐triazole‐linked polymeric ssDNA analogue from a modified nucleoside through topochemical azide–alkyne cycloaddition (TAAC) is reported. This is the first solvent‐free, catalyst‐free synthesis of a DNA analogue that proceeds in quantitative yield and does not require any purification.     

Spontaneous Single‐Crystal‐to‐Single‐Crystal Evolution of Two Cross‐Laminated Polymers

Two cases of spontaneous evolution of monomers to linear polymers having novel cross‐laminated topology are reported. We synthesized two peptide monomers N₃‐Gly‐Gly‐NH‐CH₂‐CCH and N₃‐Gly‐Gly‐Gly‐CH₂‐CCH and solved their crystal structures by single‐crystal X‐ray diffraction. They adopt H‐bonded crisscrossed layered packing in their crystals such that: (a) the monomers are aligned head‐to‐tail in 1D‐chain‐like arrays and parallel arrangement of such arrays forms a layer; (b) the proximally placed azide and alkyne motifs are in an orientation apt for their regiospecific cycloaddition; (c) each monomer having x peptide bonds is H‐bonded with 2x monomers disposed in intersecting arrangement, which pre‐organize 1D‐chain‐like arrays in adjacent layers in perpendicular orientation. These crystals underwent spontaneous single‐crystal‐to‐single‐crystal (SCSC) polymerization via azide–alkyne cycloaddition reaction to form triazolyl‐polyglycines, at room temperature. The crisscrossed arrangement of monomers in adjacent layers ensured the formation of cross‐laminated polymers.     

Azide–Alkyne Interactions: A Crucial Attractive Force for Their Preorganization for Topochemical Cycloaddition Reaction

A new class of attractive intermolecular interaction between azide and ethynyl structural entities in a wide range of molecular crystals is reported. This interaction was systematically evaluated by using 11 geometrically different structural motifs that are preorganized to direct a solid-state topochemical azide–alkyne cycloaddition (TAAC) reaction. The supramolecular features of the azide–alkyne interaction were mapped by various crystallographic and quantum chemical approaches. Topological analysis shows the noticeable participation of electron density in the azide⋅⋅⋅alkyne interactions. Interestingly, reorientation of the atomic polarizabilities in vicinal azide and alkyne groups upon interaction in crystals favors soft orbital-guided TAAC reactions. Moreover, various solid-state and gas-phase energy decomposition methods of individual azide⋅⋅⋅alkyne interactions summarize that the strength (varies from −5.7 to −30.1 kJ mol⁻¹) is primarily guided by the dispersion forces with a influencing contribution from the electrostatics.     

Topochemical Polymerization of 1,3‐Diene Monomers and Features of Polymer Crystals as Organic Intercalation Materials

From the viewpoint of controlled polymer synthesis, topochemical polymerization based on crystal engineering is very useful for controlling not only the primary chain structures but also the higher‐order structures of the crystalline polymers. We found a new type of topochemical polymerization of muconic and sorbic acid derivatives to give stereoregular and high‐molecular weight polymers under photo‐, X‐ray, and γ‐ray irradiation of the monomer crystals. In this article, we describe detailed features and the mechanism of the topochemical polymerization of diethyl‐(Z,Z)‐muconate as well as of various alkylammonium derivatives of muconic and sorbic acids, which are 1,3‐diene mono‐ and dicarboxylic acid derivatives, to control the stereochemical structures of the polymers. The polymerization reactivity of these monomers in the crystalline state and the stereochemical structure of the polymers produced are discussed based on the concept of crystal engineering, which is a useful method to design and control the reactivity, structure, and properties of organic solids. The reactivity of the topochemical polymerization is determined by the monomer crystal structure, i.e. the monomer molecular arrangement in the crystals. Polymer crystals derived from topochemical polymerization have a high potential as new organic crystalline materials for various applications. Organic intercalation using the polymer crystals prepared from alkylammonium muconates and sorbates is also described.     

Preparation of side‐chain liquid crystalline Azopolymers by CuAAC postfunctionalization using bifunctional azides: Induction of chirality using circularly polarized light

Well‐defined side‐chain liquid crystal azopolymers have been synthesized by click chemistry of poly(propargyl methacrylate) with bifunctional liquid crystalline azides to produce materials with large degrees of functionalization. A polymeric scaffold having pendant alkyne groups was prepared by atom transfer radical polymerization (ATRP) and postfunctionalized by copper(I)‐catalyzed azide‐alkyne cycloaddition (CuAAC) using homo‐ and heterobifunctional azides. The azides are derivatives of 2,2‐bis(hydroxymethyl)propanoic acid (bis‐MPA) containing photoresponsive azobenzene and/or liquid crystalline biphenyl moieties. The approach is a convenient alternative to increase the density of functional units in side‐chain polymers having moderate polymerization degrees and to modulate the properties of the final material. The article describes the synthesis, characterization, and liquid crystalline properties of the obtained polymers. The effect of the chemical structure and the possible cooperative effects between functional units in the photo‐induction of chirality are also evaluated. A switchable photo‐transference of chirality from the circularly polarized light (CPL) to material has been achieved. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Chain‐Growth Click Polymerization of AB2 Monomers for the Formation of Hyperbranched Polymers with Low Polydispersities in a One‐Pot Process

Hyperbranched polymers are important soft nanomaterials but robust synthetic methods with which the polymer structures can be easily controlled have rarely been reported. For the first time, we present a one‐pot one‐batch synthesis of polytriazole‐based hyperbranched polymers with both low polydispersity and a high degree of branching (DB) using a copper‐catalyzed azide–alkyne cycloaddition (CuAAC) polymerization. The use of a trifunctional AB₂ monomer that contains one alkyne and two azide groups ensures that all Cu catalysts are bound to polytriazole polymers at low monomer conversion. Subsequent CuAAC polymerization displayed the features of a “living” chain‐growth mechanism with a linear increase in molecular weight with conversion and clean chain extension for repeated monomer additions. Furthermore, the triazole group in a linear (L) monomer unit complexed Cu^I, which catalyzed a faster reaction of the second azide group to quickly convert the L unit into a dendritic unit, producing hyperbranched polymers with DB=0.83.     

Linear poly(amide triazole)s derived from d‐glucose

The click reaction between azides and alkynes is been increasingly employed in the preparation of polymers. In this article, we describe the synthesis and click polyaddition reaction of a new A‐B‐type amide monomer—prepared from d ‐glucose as renewable resource—containing the alkyne and azide functions. Both Cu(I)‐catalyzed and metal‐free click polymerization methods were used to prepare glucose‐derived poly(amide triazole)s. The resulting polymers had weight‐average molecular weights in the 45,000–129,000 range and were characterized by GPC, IR, and NMR spectroscopies. Thermal and X‐ray diffraction studies revealed them to be amorphous. Their qualitative solubilities in various solvents and their water sorption have been studied. The poly(amide triazole)s having the alcohol functions protected as methyl ether were water‐soluble. The presence of the amide functions along the polymer chain made these polytriazoles degradable in the presence of sodium deuteroxide. The degradation was monitored by NMR analysis, and the degradation product was characterized by HRMS. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 629–638     

Designed Synthesis of a 1D Polymer in Twist-Stacked Topology via Single-Crystal-to-Single-Crystal Polymerization

To synthesize a fully organic 1D polymer in a novel twist-stacked topology, we designed a peptide monomer HC≡CCH₂-NH-Ile-Leu-N₃, which crystallizes with its molecules H-bonded along a six-fold screw axis. These H-bonded columns pack parallelly such that molecules arrange head-to-tail, forming linear non-covalent chains in planes perpendicular to the screw axis. The chains arrange parallelly to form molecular layers which twist-stack along the screw axis. Crystals of this monomer, on heating, undergo single-crystal-to-single-crystal (SCSC) topochemical azide–alkyne cycloaddition (TAAC) polymerization to yield an exclusively 1,4-triazole-linked polymer in a twist-stacked layered topology. This topologically defined polymer shows better mechanical strength and thermal stability than its unordered form, as evidenced by nanoindentation studies and thermogravimetric analysis, respectively. This work illustrates the scope of topochemical polymerizations for synthesizing polymers in pre-decided topologies.     

Tunable Mechanical Response from a Crystal Undergoing Topochemical Dimerization: Instant Explosion at a Faster Rate and Chemical Storage of a Harvestable Explosion at a Slower Rate

Strain developed in crystals in response to stimuli causes mechanical response. Methods to tune such mechanical response is important for practical applications. Crystals of a monomer having azide and alkyne units pre‐organized in a ready‐to‐react orientation, undergo thermal topochemical dimerization and show rate‐dependent mechanical response. When the reaction rate is fast, the crystals explode violently. When the reaction rate is slow, the crystals absorb water from the surroundings contemporaneously with the reaction to form the dimer‐hydrate in a single‐crystal‐to‐single‐crystal (SCSC) manner. Crystals of the dimer‐hydrate upon dehydration also undergo explosion. Thus, at slow reaction rate, the strain gets stored in crystals by hydration and the explosion can be harvested, at will, by dehydration. Use of this rate‐dependent explosion in the automatic activation of a remedial electrical circuit in case of a sudden rise in temperature has been demonstrated.     

Cyclic alkoxyamine‐initiator tethered by azide/alkyne‐“click”‐chemistry enabling ring‐expansion vinyl polymerization providing macrocyclic polymers

A cyclic initiator for the nitroxide‐mediated controlled radical polymerization (NMP) is a powerful tool for the preparation of macrocyclic polymers via a ring‐expansion vinyl polymerization mechanism. For this purpose, we prepared a Hawker‐type NMP‐initiator that includes an azide and a terminal alkyne as an acyclic precursor, which is subsequently tethered via an intramolecular azide/alkyne‐“click”‐reaction, producing the final cyclic NMP‐initiator. The polymerization reactions of styrene with cyclic initiator were demonstrated and the resultant polymers were characterized by the gel permeation chromatography (GPC) and the matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). These results prove that the ring‐expansion polymerization of styrene occurred together with the radical ring‐crossover reactions originating from the exchange of the inherent nitroxides generating macrocyclic polystyrenes with higher expanded rings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3402–3416, 2010     

Star polymers by photoinduced copper‐catalyzed azide–alkyne cycloaddition click chemistry

Well‐defined star polymers consisting of tri‐, tetra‐, or octa‐arms have been prepared via coupling‐onto strategy using photoinduced copper(I)‐catalyzed 1,3‐dipolar cycloaddition click reaction. An azide end‐functionalized polystyrene and poly(methyl methacrylate), and an alkyne end‐functionalized poly(ε‐caprolactone) as the integrating arms of the star polymers are prepared by the combination of controlled polymerization and nucleophilic substitution reactions; whereas, multifunctional cores containing either azide or alkyne functionalities were synthesized in quantitatively via etherification and ring‐opening reactions. By using photoinduced copper‐catalyzed azide–alkyne cycloaddition (CuAAC) click reaction, reactive linear polymers are simply attached onto multifunctional cores to form corresponding star polymers via coupling‐onto methodology. The chromatographic, spectroscopic, and thermal analyses have clearly demonstrated that successful star formations can be obtained via photoinduced CuAAC click reaction. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1687–1695     

Solid‐State Synthesis of Two Different Polymers in a Single Crystal: A Miscible Polymer Blend from a Topochemical Reaction

The topochemical synthesis of a miscible polymer blend is described. The azide‐ and alkyne‐decorated tetrol 1 crystallizes as two different conformers. Both conformers exhibit self‐sorted head‐to‐tail alignment with proximally placed reacting groups such that topochemical polymerization yields two types of polymer chains, each containing only one type of conformer. The orientation of complementary reactive groups in one of the head‐to‐tail‐arranged conformers favors the formation of cis‐triazole linkages, and the other favors the trans‐triazole linkages. Crystals of 1 on heating gave a perfect polymer blend containing equal amounts of cis‐triazole‐linked and trans‐triazole‐linked polymers. As each conformer is H‐bonded to four conformers of the other kind, the polymerization yields a perfect polymer blend wherein each polymer chain is surrounded by chains of the other type. Thus, the molecular ordering in the prepolymerized state in a crystal is utilized to create a polymer blend.     

Single-Crystal-to-Single-Crystal Topochemical Synthesis of a Collagen-inspired Covalent Helical Polymer

There is much demand for crystalline covalent helical polymers. Inspired by the helical structure of collagen, we synthesized a covalent helical polymer wherein the repeating dipeptide Gly-Pro units are connected by triazole linkages. We synthesized an azide and alkyne-modified dipeptide monomer made up of the repeating amino acid sequence of collagen. In its crystals, the monomer molecules aligned in head-to-tail fashion with proximally placed azide and alkyne forming supramolecular helices. At 60 °C, the monomer underwent single-crystal-to-single-crystal (SCSC) topochemical azide-alkyne cycloaddition polymerization, yielding a covalent helical polymer as confirmed by single-crystal X-ray diffraction (SCXRD) analysis. Compared to the monomer crystals, the polymer single-crystals were very strong and showed three-fold increase in Young's modulus, which is higher than collagen, many synthetic polymers and other materials. The crystals of this covalent helical polymer could bear loads as high as 1.5 million times of their own weight without deformation. These crystals could also withstand high compression force and did not disintegrate even at an applied force of 98 kN. Such light-weight strong materials are in demand for various technological applications.     

Living cationic polymerization of a vinyl ether with an unprotected pendant alkynyl group and their use for the protecting group‐free synthesis of macromonomer‐type glycopolymers via CuAAC with maltosyl azides

An asymmetric bifunctional monomer having both an unprotected alkynyl group and a vinyl ether (VE) group (3‐[2‐(2‐vinyloxyethoxy)‐ethoxy]‐propyne [VEEP]) was newly designed and found that the polymerization of VEEP smoothly proceeded in a controlled manner under a living cationic polymerization condition to give alkyne‐substituted polyVE (polyVEEP) without any protection of the pendant alkynyl function. Next, the use of an initiator with a methacryloyl moiety for the living cationic polymerization of VEEP afforded macromonomer‐type polyVE (MA‐PVEEP) carrying pendant alkynyl groups. The potential ability of the resultant macromonomer as an alkyne‐substituted polymer for the copper(I)‐catalyzed alkyne‐azide cycloaddition (CuAAC) was also confirmed. A novel macromonomer‐type glycopolymer [MA‐P(VE‐Mal)] having pendant maltose residues and a terminal methacryloyl group was successfully synthesized by CuAAC of MA‐PVEEP with maltosyl azide. Thus, a new pathway to the controlled synthesis of macromonomer‐type glycopolymers of free from any protecting/deprotecting processes was demonstrated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 681–688