Copper(I)-anilide complex [Na(phen)3][Cu(NPh2)2]: an intermediate in the copper-catalyzed N-arylation of N-phenylaniline

Complex [Na(phen)₃][Cu(NPh₂)₂] ( 2 ), containing a linear bis(N‐phenylanilide)copper(I) anion and a distorted octahedral tris(1,10‐phenanthroline)sodium counter cation, has been isolated from the catalytic C? N cross‐coupling reaction with the CuI/phen/tBuONa (phen=1,10‐phenanthroline) catalytic system. Complex 2 can react with 4‐iodotoluene to produce 4‐methyl‐N,N‐diphenylaniline ( 3 a ) with 70.6 % yield. In addition, 2 can work as an effective catalyst for C? N coupling under the same reaction conditions, thus indicating that 2 is the intermediate of the catalytic system. Both [Cu(NPh₂)₂]^? and [Cu(NPh₂)I]^? have been observed by in situ electron ionization mass spectrometry (ESI‐MS) under catalytic reaction conditions, thus confirming that they are intermediates in the reaction. A catalytic cycle has been proposed based on these observations. The molecular structure of 2 has been determined by single‐crystal X‐ray diffraction analysis.     

纳米Cu2O催化二苯甲烷二氨基甲酸苯酯无溶剂热分解制备二苯甲烷二异氰酸酯

研究了无溶剂条件下纳米Cu₂O催化二苯甲烷二氨基甲酸苯酯(MDPC)热分解制备二苯甲烷二异氰酸酯(MDI),考察了纳米Cu₂O的制备条件与反应条件对MDPC热分解反应性能的影响.结果表明,水解法制备的纳米Cu₂O在Ar中于300℃焙烧2h,其催化性能最佳;最佳的反应条件为Cu₂O用量为原料总重的0.06%,反应温度220℃,反应压力0.6kPa,反应时间12min,此时MDPC转化率达到99.8%,MDI选择性86.2%.     

Catalytic Transfer Hydrogenation with a Methandiide‐Based Carbene Complex: An Experimental and Computational Study

The transfer hydrogenation (TH) reaction of ketones with catalytic systems based on a methandiide‐derived ruthenium carbene complex was investigated and optimised. The complex itself makes use of the noninnocent behaviour of the carbene ligand (M?CR₂→MH?C(H)R₂), but showed only moderate activity, thus requiring long reaction times to achieve sufficient conversion. DFT studies on the reaction mechanism revealed high reaction barriers for both the dehydrogenation of iPrOH and the hydrogen transfer. A considerable improvement of the catalytic activity could be achieved by employing triphenylphosphine as additive. Mechanistic studies on the role of PPh₃ in the catalytic cycle revealed the formation of a cyclometalated complex upon phosphine coordination. This ruthenacycle was revealed to be the active species under the reaction conditions. The use of the isolated complex resulted in high catalytic activities in the TH of aromatic as well as aliphatic ketones. The complex was also found to be active under base‐free conditions, suggesting that the cyclometalation is crucial for the enhanced activity.     

水/二甲基亚砜体系中无机盐高效催化木糖脱水制备糠醛(英)

提出了一种高效的均相催化木糖制备糠醛的方法,探讨了水/二甲基亚砜（DMSO）均相体系中不同类型的无机盐对催化木糖制备糠醛的影响.结果表明,氯盐较硫酸盐和硝酸盐表现出较高的催化活性,其中以SnCl₄的催化效果最高.且它与LiCl复配时催化性能更高.当SnCl₄的摩尔分数为0.8时,催化效果最好,糠醛收率达56.9%.反应条件优化实验发现,当催化剂与木糖的摩尔比为0.5:1,固液比为1:20,水与DMSO体积比为5:5时,于130℃下反应6h,糠醛收率达63%.     

An efficient BINAM-copper(II) catalyzed Ullmann-type synthesis of diaryl ethers

A wide range of diaryl ethers are synthesized from the corresponding aryl iodides and phenols through Ullmann type coupling reactions in the presence of a catalytic amount of easily available BINAM-Cu(OTf)₂ complex under mild reaction conditions. Less reactive aryl bromides have also been shown to react with phenols under identical reaction conditions to give good yields of the diaryl ethers without increasing the reaction temperature and time.     

A simple and efficient hydrogenation of benzyl alcohols to methylene compounds using triethylsilane and a palladium catalyst

Hydrogenolysis of benzyl alcohols using triethylsilane (Et₃SiH) and a catalytic amount of palladium(II) chloride (PdCl₂) is described. The reaction takes place under mild conditions affording high yields of the corresponding methylene compounds in short reaction times.     

Selective reduction of aromatic nitro compounds affording aromatic amines under CO/H2O conditions catalyzed by phosphine-added rhodium and ruthenium carbonyl complexes

High catalytic activities for the selective reduction of aromatic nitro compounds to the corresponding amines under the mild reaction conditions of room temperature and 1 atm of CO were found to be exhibited by chelatephosphine (dppe, dppm, etc.; dppe: 1,2-bis(diphenylphosphino)ethane, dppm: bis(diphenylphosphino)methane)-added rhodium and ruthenium carbonyl complexes in a 5 N NAOH aqueous solution. The reduction proceeded not only with high catalytic activities, but also with remarkably high nitro group selectivities; for example, 1-nitroanthraquinone afforded 1-aminoanthraquinone without other unsaturated groups (such as CO) being reduced. PR₃-added Rh(CO)₂(acac) complexes (PR₃: PEtPh₂, PEt₂Ph, PEt₃, etc.; acac: acetylacetonato) in diglyme in a 5 N NaOH aqueous solution were also found to show significant catalytic activities for the reduction of aromatic nitro compounds under mild CO/H₂O conditions. Both electronic and steric factors of phosphine ligands are important in making this reaction proceed at such remarkable rates.     

Synergistic Ag(I)/nBu4NBr-catalyzed fixation of CO2 to β-oxopropyl carbonates via propargylic alcohols and monohydric alcohols

Chemical fixation of carbon dioxide under mild reaction conditions e.g. atmospheric pressure and low temperature depends upon the ability of catalyst. Herein, a synergistic catalytic scheme of silver sulfadiazine/ⁿBu₄NBr was described for the three-component reaction of propargylic alcohols, CO₂, and monohydric alcohols. This catalytic system was demonstrated effectively to provide β-oxopropyl carbonates in excellent yields (up to 99% yield with 5?mol% catalyst). The method tolerated a wide scope of propargylic alcohols and monohydric alcohols under atmospheric CO₂ pressure and solvent-free conditions. The excellent catalytic performance was attributed to the synergistic catalysis confirmed by the careful experiments.     

Hydroformylation of olefins catalyzed by rhodium complex anchored on clay matrices

Investigations on the catalytic activity of a transient Rh(I) triphenylphosphine complex1 anchored on montmorillonite clay have been carried out with respect to hydroformylation of olefins at 70°C and 60 atm of CO+H₂ (1:1). The analysis has shown that aldehydes and hydrocarbons of the corresponding olefins result under hydroformylation conditions. In limonene, reaction proceeds with double hydroformylation and hydrogenation to give the respective oxo products. The catalytic activities of1 are compared with Wilkinson's Rh^I (H) (CO) (PPh₃)₂ (6) complex in solution under the same hydroformylation conditions.     

(Cyclopentadienyl)trioxorhenium(VII) – no Match for Methyltrioxorhenium (MTO)

Together with a further improvement of the synthesis of (cyclopentadienyl)trioxorhenium(VII), CpReO₃, its reaction chemistry and catalytic activity is also revisited in greater detail. However, in spite of the high catalytic activity of the homologous methyltrioxorhenium(VII) (MTO) and the related CpMo(O₂)X, (X = R, Hal, etc.) it is seen that CpReO₃ suffers greatly from the lability of the Cp‐Re bond under oxidative conditions and in the presence of electron donor ligands. (Cyclopentadienyl)trioxorhenium(VII) although accessible very conveniently, neither matches the rich reaction chemistry of its pentamethylcyclopentadienyl derivative, Cp*ReO₃ nor the catalytic versatility of MTO.     

Effect of preparation conditions on the formation of the active phase of carbon fiber catalytic systems for the low-temperature oxidation of carbon monoxide

We studied the effects of the composition of impregnating solution and heat treatment conditions on the activity of catalytic systems for the low-temperature oxidation of CO obtained by the impregnation of Busofit carbon-fiber cloth with aqueous solutions of palladium, copper, and iron salts. The formation of an active phase in the synthesized catalysts at different stages of their preparation was examined with the use of differential thermal and thermogravimetric analyses, X-ray diffraction analysis, X-ray photoelectron spectroscopy, and elemental spectral analysis. The catalytic system prepared by the impregnation of electrochemically treated Busofit with the solutions of PdCl₂, FeCl₃, CuBr₂, and Cu(NO₃)₂ and activated under optimum conditions ensured 100% CO conversion under a respiratory regime at both low (0.03%) and high (0.5%) carbon monoxide contents of air. It was found that the activation of a catalytic system at elevated temperatures (170–180°C) leads to the conversion of Pd(II) into Pd(I), which was predominantly localized in a near-surface layer. The promoting action of copper nitrate consists in the formation of a crystalline phase of the rhombic atacamite Cu₂Cl(OH)₃. The catalyst surface is finally formed under the conditions of a catalytic reaction, when a joint Pd(I)-Cu(I) active site is formed.     

CeO2/Pd Nanoparticles Incorporated Fly Ash Zeolite: An Efficient and Recyclable Catalyst for Csp2-Csp2 Bond Formation Reactions

The catalytic activity of CeO₂ and palladium nanoparticles supported fly ash zeolite (CeO₂/Pd@FAZ) for C_sp²-C_sp² bond formation was studied. CeO₂/Pd@FAZ was characterized by FTIR, XRD, EDAX and TEM studies. In the Suzuki-Miyauracross-coupling reaction, biphenyl derivatives with excellent yields were obtained, and the reaction conditions were optimized. The catalytic activity was explored using a wide variety of diversely substituted aryl bromides and chlorides with aryl boronic acid under optimized reaction conditions. The recyclability of the catalyst was established for three cycles, with the conversion rate from 99 to 40%, which gained the advantage of heterogeneous catalysis.     

Cellulose stabilized Fe3O4 and carboxylate-imidazole and Co-based MOF growth as an exceptional catalyst for the Knoevenagel reaction

In this study, Fe₃O₄ nanoparticles were functionalized with cellulose, and then hybridized with cobalt (II)-based metal-organic framework (Co-MOF) containing carboxylate and imidazole functionalities. FTIR, XRD, FE-SEM, TEM, BET, EDX, VSM and STA analyses were used to characterize the synthesized samples. The resultant Fe₃O₄/cellulose/Co-MOF nanocomposite was applied efficiently as a powerful and economic heterogeneous catalyst in the condensation of a variety of different aromatic aldehydes with malononitrile under solvent-free conditions at room temperature for 10 min and offered the corresponding coupling products in high yields. The catalyst could be straightforwardly separated by a magnet from the reaction mixture and reused without a noteworthy drop in catalytic activity at least five times. The use of Fe₃O₄/cellulose/Co-MOF catalyst outcomes under mild reaction conditions in very short reaction time, outstanding catalytic activity, high recyclability and an easy work-up process for Knoevenagel condensation.     

Nanosized cobalt-based catalyst prepared by supercritical phase condition for Fischer-Tropsch synthesis

A series of nanosized Co/Zn/Mn/K composite catalysts for Fischer-Tropsch synthesis (FTS) were prepared by supercritical fluid drying (SCFD) method and common drying (CD) method. The nanosized cobalt-based catalysts were characterized by XRD, TEM and BET techniques. Their catalytic performances were tested in a slurry-bed reactor under FTS reaction conditions. The drying and crystallization were carried out simultaneously during SCFD, therefore, the catalysts prepared by SCFD method have ideal structure and show the FTS performance superior to the others prepared by CD method. The FTS activity and selectivity were improved via adding Zn, Mn and K promoters, and less CH₄ and CO₂ as well as higher yield of C₅₊ products were achieved. The optimal performance of a 92% CO conversion and a 65% C₅₊ product yield was obtained over a catalyst with the component of Co/Zn/Mn/K = 100/50/10/7. Furthermore, the catalytic performance was studied under the conditions of liquid-phase and supercritical phase slurry-bed, and C₅₊ product yield were 57.4% and 65.4%, respectively. In summary, better catalytic performance was obtained using the nanosized catalyst prepared by SCFD method under supercritical reaction conditions, resulting in higher conversion of CO, less CO₂ byproduct, and higher yield of C₅₊ products.     

The catalytic olefination reaction of aldehydes and ketones with CBr3CF3

The new approach of catalytic olefination reaction (COR) has been used to convert aromatic and aliphatic aldehydes and ketones to 2-bromo-3,3,3-trifluoroprop-1-enes by the treatment of corresponding hydrazones with CBr₃CF₃ under copper(I) catalysis conditions. The reaction proceeds stereoselectively, the target alkenes were obtained in good yields.     

Synthesis of short straight-chain alkylamine based hyperbranched nickel complexes and their catalytic performance of ethylene oligomerization

Short straight-chain alkylamine based hyperbranched molecules and their corresponding salicylaldimine nickel complexes have been synthesized in high yield and characterized by FTIR, ¹H-NMR and mass spectrometry. The optimal reaction parameters were determined under the catalytic system of methylaluminoxane (MAO) as co-catalyst and toluene as solvent. Under these conditions, the effect of catalyst structure, solvent and co-catalyst were determined. Upon activation of MAO in toluene, ethylene oligomerization products were homogeneous distribution of butene, hexene and octene with trace higher olefin. The same catalytic system under cyclohexane and methyl cyclohexane as solvent, however, produced majority of butene. Under the activation of EtAlCl₂, Et₂AlCl and EASC as co-catalyst in toluene, ethylene oligomerization reaction was tandem with Friedel-Crafts reaction in catalytic system.     

Décomposition de l'isopropanol sur les apatites mixtes calcium-argent

Decomposition of isopropanol on mixed calcium-silver apatites. A new family of apatite materials Ca_10-xAg_x(PO₄)₆(OH)_2-x□_x were synthesized, then studied using the decomposition reaction of isopropanol. The catalytic activity of the mixed apatites was observed to correspond mainly to dehydrogenation reaction features (the formation of acetone). This phenomenon has been tentatively related to the migration of Ag⁺ ions towards the surface and to their reduction to metallic silver under catalytic reaction conditions. The catalytic tests for the isopropanol decomposition reaction show that silver substituted hydroxyapatites were more actives than pure hydroxyapatite.     

Small Cobalt Nanoparticles Favor Reverse Water-Gas Shift Reaction Over Methanation Under CO2 Hydrogenation Conditions**

Cobalt-based catalysts are well-known to convert syngas into a variety of Fischer–Tropsch (FTS) products depending on the various reaction parameters, in particular particle size. In contrast, the reactivity of these particles has been much less investigated in the context of CO₂ hydrogenation. In that context, Surface organometallic chemistry (SOMC) was employed to synthesize highly dispersed cobalt nanoparticles (Co-NPs) with particle sizes ranging from 1.6 to 3.0 nm. These SOMC-derived Co-NPs display significantly different catalytic performances under CO₂ hydrogenation conditions: while the smallest cobalt nanoparticles (1.6 nm) catalyze mainly the reverse water-gas shift (rWGS) reaction, the larger nanoparticles (2.1–3.0 nm) favor the expected methanation activity. Operando X-ray absorption spectroscopy shows that the smaller cobalt particles are fully oxidized under CO₂ hydrogenation conditions, while the larger ones remain mostly metallic, paralleling the observed difference of catalytic performances. This fundamental shift of selectivity, away from methanation to reverse water-gas shift for the smaller nanoparticles is noteworthy and correlates with the formation of CoO under CO₂ hydrogenation conditions.     

Nickel‐Catalyzed Methylation of Aryl Halides with Deuterated Methyl Iodide

A nickel‐catalyzed methylation of aryl halides with cheap and readily available CH₃I or CD₃I is described. The reaction is applicable to a wide range of substrates and allows installation of a CD₃ group under mild reaction conditions without deuterium scrambling to other carbon atoms. Initial mechanistic studies on the stoichiometric and catalytic reactions of the isolated [(dppp)Ni(C₆H₄‐4‐CO₂Et)Br] [dppp=1,3‐bis(diphenylphosphanyl)propane] suggest that a Ni⁰/Ni^II catalytic cycle is favored.     

Efficient and ligand free palladium catalyst for Suzuki and Heck cross-coupling reactions

A simple and efficient system for Suzuki cross-coupling reactions was developed using a ligandless catalyst of Pd nanoclusters generated in situ from Pd(acac)₂. The cross-coupling reactions proceeded under mild reaction conditions with a high reaction rate (5 min) to give various biaryls in high yields. The system also exhibited catalytic potential for Heck reaction between aryl bromides and styrene.