Tailoring block copolymer and polymer blend morphology using nanoparticle surfactants

Combining the functionality of nanoparticles (NPs) with the processability of polymers offers great promise for designing novel materials. In particular, NPs with tailored surface properties can effectively modify the interface between two distinct fluids and/or different polymer matrices which allows them to function as efficient surfactants. The efficiency of NP surfactants is strongly affected by their size and shape, which influences their adsorption energy to the interface, and the entropic contribution to the system. In this review, the assembly of size- and shape-controlled inorganic NPs at the interface of block copolymers (BCPs) and polymer blends has been focused. First, we discuss the design of size- and shape-controlled NP surfactants and we review the examples of NP surfactant-driven BCPs and polymer blend morphologies. In addition, we review the recent investigations of the morphological transition of BCP emulsion particles induced by NP surfactants. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016, 54, 228–237     

Synthesis of water‐soluble zwitterionic polysiloxanes

A series of water‐soluble siloxane polymers with pendent phosphorylcholine (PC) and sulfobetaine (SB) zwitterions was prepared using thiol‐ene “click” chemistry. Specifically, well‐defined vinyl‐substituted siloxane homopolymers and block copolymers were functionalized with small molecule zwitterionic thiols at room temperature. Rapid and quantitative substitution of the pendent vinyl groups was achieved, and zwitterionic polysiloxanes of narrow molecular weight distribution were obtained. The PC‐ and SB‐substituted polymers were found to be readily soluble in pure, salt‐free water. Critical micelle concentrations (CMCs) of these polymers in water were measured using a pyrene fluorescence probe, with CMC values estimated to be <0.01 g/L. Polymer aggregates were studied by dynamic light scattering, and the micelles generated from the PC block copolymers were visualized, after drying, by transmission electron microscopy. Aqueous solutions of these zwitterionic polysiloxanes significantly reduced the oil‐water interfacial surface tension, functioning as polymer amphiphiles that lend stability to oil‐in‐water emulsions. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 127–134     

Zwitterionic Block Copolymers for the Synthesis and Stabilization of Perovskite Nanocrystals

Traditional hot injection methods for the preparation of cesium lead halide perovskite nanocrystals (CsPbX₃ PNCs, where X=Cl, Br, or I) rely on small molecule surfactants to produce PNCs with cube, plate, or rod-like morphologies. Here, we describe a new method whereby zwitterionic block copolymers are employed as macromolecular ligands in PNC synthesis, affording PNCs with excellent colloidal stability, high photoluminescence quantum yield, and in some cases distinctly non-cubic shapes. The block copolymers used in this study – composed of a poly(n-butyl methacrylate) hydrophobic block and zwitterionic methacrylate hydrophilic blocks – dissolve in useful solvents for PNC growth despite containing large mole percentages of zwitterionic groups. PNCs prepared with block copolymer ligands were found to disperse and retain their fluorescence in a range of polar organic solvents and were amenable to direct integration into optically transparent nanocomposite thin films with high PNC content.     

Preparation and characterization of poly(l-lactic acid)/TiO2 nanoparticle nanocomposite films with high transparency and efficient photodegradability

Poly(l-lactic acid)-TiO₂ nanoparticle nanocomposite films were prepared by incorporating surface modified TiO₂ nanoparticles into polymer matrices. In the process of preparing the nanocomposite films, severe aggregation of TiO₂ nanoparticles could be reduced by surface modification by using carboxylic acid and long-chain alkyl amine. As a result, the nanocomposite films with high transparency, similar to pure PLA films, were obtained without depending on the amount of added TiO₂ nanoparticles. A TEM micrograph of the nanocomposite films suggests that the TiO₂ nanoparticles of 3-6 nm in diameter were uniformly dispersed in polymer matrices. Photodegradation of PLA-TiO₂ nanoparticle nanocomposite films was also investigated. The results showed that nanocomposite films could be efficiently photodegraded by UV irradiation in comparison with pure PLA.     

Photocaged pendent thiol polymer brush surfaces for postpolymerization modifications via thiol‐click chemistry

In this work, a postpolymerization surface modification approach is reported that provides pendent thiol functionality along the polymer brush backbone using the photolabile protection chemistry of both o‐nitrobenzyl and p‐methoxyphenacyl thioethers. Poly(2‐hydroxyethyl methacrylate) (pHEMA) brushes were synthesized via surface‐initiated atom transfer radical polymerization, after which the pHEMA hydroxyl groups were esterified with 3‐(2‐nitrobenzylthio)propanoic acid or 3‐(2‐(4‐methoxyphenyl)‐2‐oxoethylthio)propanoic acid to provide the photolabile protected pendent thiols. Addressing the protecting groups with light not only affords spatial control of reactive thiol functionality but enables a plethora of thiol‐mediated transformations with isocyanates and maleimides providing a modular route to create functional polymer surfaces. This concept was extended to block copolymer brush architectures enabling the modification of the chemical functionality of both the inner and outer blocks of the block copolymer surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Photovoltaic properties of the polymer solar cells comprising crosslinked maleimide polymers and fullerene‐derivative PCBM

A series of crosslinkable maleimide conjugated polymers with different vinyl group contents as side‐chain crosslinking sites have been synthesized by the Suzuki coupling reaction. Polymer solar cells (PSCs) were fabricated based on an interpenetrating network of the crosslinkable maleimide polymers as the electron donor, and a fullerene derivative, (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM), as the electron acceptor. The crosslinkable maleimide polymers underwent crosslinking reaction at the side‐chain vinyl groups upon the thermal treatment with or without the addition of initiator, azobisisobutyronitrile (AIBN). Better photovoltaic (PV) performances were obtained for the PSCs based on the polymer crosslinking without using initiator, whereas poorer PV performances were observed for the PSCs based on the polymer crosslinking with the AIBN initiator. In addition, higher operational stability was observed for the crosslinked polymer based solar cell as compared to the solar cell based on the un‐crosslinked polymer. The photo‐physical and PV properties of the cross‐linked maleimide polymers/PCBM based PSCs are discussed in detail as the morphology and crosslinking density of the polymers are taken into account. Copyright © 2010 John Wiley & Sons, Ltd.     

Aqueous processing of graphene–polymer hybrid thin film nano-composites and gels

Research into the structure, properties and applications of graphene has moved at a tremendous pace over the past few years. This review describes one aspect of this research, that of the incorporation of graphene particles with a range of polymers to create novel hybrid materials with increased functionality such as improved conductance, increased strength and introduced biocompatibility or cytotoxicity. This review focuses on dispersing graphene in polymer matrices, both insulating and conducting. Additionally, a brief discussion of carbon based platelet production methods is given in order to provide context on the subsequent use of this family of materials such as graphene, graphene oxide (GO) and reduced graphene oxide (rGO) incorporated into polymeric thin films.     

Design and evaluation of polymer matrices for the encapsulation of CdSe/ZnS quantum dots in photonic nanocomposite thin films

A systematic approach and a new scheme for the evaluation of the as–is encapsulation of CdSe/ZnS core/shell quantum dots into polymer matrices is proposed, aiming to the implementation of thin film photonic integrated structures. Work focuses on quantum dots capped by hexadecylamine and trioctylphosphine oxide with no ligand exchange or other intermediate processing steps involved. The polymers studied include poly(methyl–methacrylate) (PMMA), polystyrene and acrylic polymers incorporating long alkyl chains, which are expected to promote the compatibility of the quantum dot ligands to that of the polymer chains. In this approach, the variation of photoluminescence properties of the nanocomposite thin films is measured versus increased concentration of the quantum dots, so as to evaluate the suitability of each polymer structure as an efficient host. Furthermore, the refractive index of the quantum dots/polymer nanocomposite thin films are also estimated using white light reflectance spectroscopy data, as appropriate for the integration of photonic devices. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 552–560     

Amine containing cationic methacrylate copolymers as efficient gene delivery vehicles to retinal epithelial cells

Non‐viral gene delivery vectors have emerged as potential alternatives in the field of gene therapy by replacing the biological viral vectors. DNA–cationic polymer complexes are one of the most promising systems to target many inborn or acquired diseases without the utilization of conventional drugs. Despite the excellent binding efficiency of cationic polymers, the gene transfection seems limited to date. In this work, a series of ammonium‐based block‐copolymers with different alkyl side chains (ethyl, butyl, and hexyl) and functionality (alcohol, amine, and alkyl) have been prepared to evaluate their capacity to deliver genetic material. First, different ionic liquid monomers with different pendent functional groups were prepared and characterized. Then, polyplexes elaborated with different polymers at several polymer DNA ratios (w/w) were characterized in terms of size, zeta potential, and DNA binding, release, and protection capacity. Finally, the transfection efficiency and cell viability was evaluated in ARPE19 cells. We found that only the systems containing the amine pendent group were able to transfect ARPE19 cell and, that this amine containing polymer was less cytotoxic even at high polymer/DNA ratios (30:1). In conclusion, our studies suggested that the proper selection of the pendent group substantially impacts overall transfection efficiency of cationic polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 280–287     

A Synthetic Bioinspired Carbohydrate Polymer with Mucoadhesive Properties

Mucoadhesive polymers are of significant interest to the pharmaceutical, medical device, and cosmetic industries. Polysaccharides possessing charged functional groups, such as chitosan, are known for mucoadhesive properties but suffer from poor chemical definition and solubility, while the chemical synthesis of polysaccharides is challenging with few reported examples of synthetic carbohydrate polymers with engineered‐in ionic functionality. We report the design, synthesis, and evaluation of a synthetic, cationic, enantiopure carbohydrate polymer inspired by the structure of chitosan. These water‐soluble, cytocompatible polymers are prepared via an anionic ring‐opening polymerization of a bicyclic β‐lactam sugar monomer. The synthetic method provides control over the site of amine functionalization and the length of the polymer while providing narrow dispersities. These well‐defined polymers are mucoadhesive as documented in single‐molecule scale (AFM), bulk solution phase (FRAP), and ex vivo tissue experiments. Polymer length and functionality affects bioactivity as long, charged polymers display higher mucoadhesivity than long, neutral polymers or short, charged polymers.     

Small molecule self‐assembly in polymer matrices

Using small molecules in polymer matrices is common in applications such as (i) plasticizing polymers to modify the glass transition and mechanical properties and (ii) dispersion of photoactive or electroactive small molecules in polymer matrices in organic‐electronic devices Aggregation of these small molecules and phase separation leading to crystallization often cannot be morphologically controlled. If these are designed with self‐assembling codes such as hydrogen bonding or aromatic interactions, their phase separation behavior would be distinctly different. This review summarizes the studies on morphologies in such situations, such as (i) sub‐surface assembly in polymer matrices, (ii) controlled polymerization‐induced phase separation to create polymer blends, (iii) using the polymer to direct the assembly of small molecules in liquid crystalline devices, (iv) functionalizing a polymer with self‐assembling small molecules to cause organo‐gelation which the polymer itself would not by itself, and (v) using such systems as templates to create porous polymer structures. Organic–inorganic hybrids using polymers as templates for nanostructures and imprinted porous membranes is an emerging area. Since self‐assembly is one of the dominating area of research with respect to both small molecules, polymers as well as the combination of the two, this review summarizes the studies on the aforementioned topics. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 451–478     

Synthesis of polymeric 1‐iminopyridinium ylides as photoreactive polymers

Two synthetic routes to polymeric 1‐imino pyridinium ylides as new photoreactive polymeric architectures were investigated. In the first approach, polymerization of newly synthesized 1‐imino pyridinium ylide containing monomers yielding their polymeric analogues was achieved by free radical polymerization. Alternatively, reactive precursor polymers were synthesized and converted into the respective 1‐imino pyridinium ylide polymers by polymer analogous reactions on reactive precursor polymers. Quantitative conversion of the reactive groups was achieved with pentafluorophenyl ester containing polymers and newly synthesized photoreactive amines as well as by the reaction of poly(4‐vinylbenzoyl azide) with a photoreactive alcohol. The polymers obtained by both routes were examined regarding their photoreaction products and kinetics in solution as well as in thin polymer films. Contact angle measurements of water on the polymer films before and after irradiation showed dramatic changes in the hydrophilicity of the polymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 832–844, 2010     

An ambient self‐curable latex based on colloidal dispersions in water of two functionalized polymers and the thermally reversible crosslinked films generated

An ambient self‐curable latex (ASCL) was prepared by mixing colloidal dispersions in water of a chloromethylstyrene (CMS)‐functionalized polymer and a tertiary‐amine‐functionalized polymer. The two dispersions were obtained via the conventional emulsion copolymerization of CMS and 2‐(dimethylamino)ethylacrylate (DMAEA), respectively, with styrene (St), butyl acrylate (BA), or both. No visible coagulation was observed either in the blends after 6 months of storage or after the latexes were introduced into aqueous media with pHs in the range of 3–11. Continuous, transparent, crosslinked elastic films with smooth surfaces were obtained via casting and drying the ASCL at room temperature, when one or both of the two functional polymer particles contained BA monomeric units. Thermocompression cycles; swelling experiments; solubility tests; and ¹H NMR, IR, DSC, and transmission electron microscopy tests were carried out to investigate the crosslinking and morphology of the films. The following observations were made: (1) the crosslinks in the films were generated via the Menschutkin reaction (quaternization) between the  CH₂‐Cl groups of the CMS containing particles and the amine groups of the DMAEA containing particles; (2) the crosslinked films were thermally remoldable due to reversible decrosslinking (dequaternization) on heating and recrosslinking (requaternization) on cooling; and (3) phase separation in the films was observed when one of the functional polymers (for instance, the nonpolar CMS‐St copolymer) was incompatible with the other one (for instance, the polar BA‐DMAEA copolymer). The present ASCL might be useful in producing water‐borne coatings and adhesives, elastic films, and functional membranes. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 389–397, 2001     

Strategy for Good Dispersion of Well‐Defined Tetrapods in Semiconducting Polymer Matrices

The morphology or dispersion control in inorganic/organic hybrid systems is studied, which consist of monodisperse CdSe tetrapods (TPs) with grafted semiconducting block copolymers with excess polymers of the same type. Tetrapod arm‐length and amount of polymer loading are varied in order to find the ideal morphology for hybrid solar cells. Additionally, polymers without anchor groups are mixed with the TPs to study the effect of such anchor groups on the hybrid morphology. A numerical model is developed and Monte Carlo simulations to study the basis of compatibility or dispersibility of TPs in polymer matrices are performed. The simulations show that bare TPs tend to form clusters in the matrix of excess polymers. The clustering is significantly reduced after grafting polymer chains to the TPs, which is confirmed experimentally. Transmission electron microscopy reveals that the block copolymer‐TP mixtures (“hybrids”) show much better film qualities and TP distributions within the films when compared with the homopolymer‐TP mixtures (“blends”), representing massive aggregations and cracks in the films. This grafting‐to approach for the modification of TPs significantly improves the dispersion of the TPs in matrices of “excess” polymers up to the arm length of 100 nm.     

Synthesis of iron-containing polymers with azo dyes in the backbones or side chains

The synthesis of cationic cyclopentadienyliron-containing polymers with pendent azobenzene chromophores was accomplished via metal-mediated nucleophilic aromatic substitution reactions. All of the desired polymers were isolated as vibrantly coloured materials and displayed excellent solubility in polar aprotic solvents. Cationic and neutral cyclopentadienyliron polymers incorporating azo dyes in the backbone were also prepared. Reactions of azo dyes with dichlorobenzene complexes allowed for the isolation of cationic cyclopentdienyliron (CpFe₊) complexes with azo dye chromophores. These complexes were then reacted with 1,1′-ferrocenedicarbonyl chloride to produce the trimetallic monomers with terminal chloro groups. These monomers contained two pendent CpFe₊ cations and a neutral iron moiety in the backbone. Nucleophilic substitution reactions of these monomers with oxygen and sulfur containing dinucleophiles gave rise to a new class of polymeric materials. The pendent CpFe₊ moieties could also be cleaved from the polymer backbones using photolysis to afford novel ferrocene based polymers. The UV-vis spectra of the organoiron monomers and polymers display similar wavelength maxima however incorporating azobenzene chromophores with electron-withdrawing substituent into the polymer chains resulted in bathochromic shifts of the λ_max values.     

双烯化合物类单体合成支化聚合物的支化结构的研究

分别以二乙烯基苯(DVB)、双甲基丙烯酸二缩三乙二醇酯(tri-EGDMA)和1,6-双马来酰亚胺基正己烷(BMIH)为支化单体,采用原子转移自由基聚合合成支化聚苯乙烯;以先核后臂法合成的星状支化聚苯乙烯为参照对合成的支化聚合物的支化形态进行研究.采用气相色谱(GC)、核磁共振氢谱(1H-NMR)和三检测凝胶渗透色谱(TD-SEC)测定了苯乙烯的转化率,聚合物分子量及其分布,特性黏数和均方回转半径.实验结果表明3个支化聚合反应体系内悬垂双键是逐步消耗的,不存在明显的成核过程.反应前期,以形成带有悬垂双键的初级链和轻度支化聚合物为主,聚合物分子量随单体转化率逐步上升;反应后期,悬垂双键聚合导致的分子之间的偶合更加明显,使得聚合物分子量快速上升,合成得到的都是无规支化聚合物.     

Properties of a nanocomposite polymer electrolyte from an amorphous comb-branch polymer and nanoparticles

Three fully amorphous comb-branch polymers based on poly(styrene-co-maleic anhydride) as a backbone and poly(ethylene glycol) methyl ether of different molecular weights as side chains were synthesized. SiO₂ nanoparticles of various contents and the salt LiCF₃SO₃ were added to these comb-branch polymers to obtain nanocomposite polymer electrolytes. The thermal and transport properties of the samples have been characterized. The maximum conductivity of 2.8×10^–4 S cm^–1 is obtained at 28 °C. In the system the longer side chain of the comb-branch polymer electrolyte increases in ionic conductivity after the addition of nanoparticles. To account for the role of the ceramic fillers in the nanocomposite polymer electrolyte, a model based on a fully amorphous comb-branch polymer matrix in enhancing transport properties of Li⁺ ions is proposed.     

Single-step process to produce surface-functionalized polymeric nanoparticles

Nanoparticles (NPs) are a versatile medium for the localization of therapeutics to tumors and for cellular and tissue imaging. The ability to impart targeting capability or enhance cellular uptake is dependent in part on the presentation of relevant surface functionality, among other design parameters. Currently, the production of functionalized polymeric NPs requires the a priori synthesis of polymers bearing such functionality. Here we describe a process to produce functionalized polymeric NPs derived from nonfunctional polymers in a single step. This was achieved by tailoring the solvation of the polymer using a binary solvent system such that the addition of an aqueous phase rich in water-soluble polymer or polyelectrolytes results in the formation of NPs with the concomitant functionalization of NP surfaces with the polymeric moieties introduced into the aqueous phase. This strategy also allows for easy control over NP size independent of surface functionality. We have demonstrated that poly(lactic-co-glycolic acid) (PLGA) NPs bearing surface functionality as diverse as biological polysaccharides such as heparin, water-soluble ionic polymers, and poly(ethylene glycol) can be prepared under identical conditions in a single step, with surface coverage (mass %) ranging from 3 to >70%. We expect this novel process to enable complex surface engineering of NP chemistry that hitherto was impossible using existing approaches.     

Synthesis and comparative solution properties of single‐, twin‐, and triple‐tailed associating ionic polymers based on diallylammonium salts

The cycloterpolymerizations of single‐, twin‐, and triple‐tailed hydrophobes with hydrophilic monomer N,N‐diallyl‐N‐carboethoxymethylammonium chloride and sulfur dioxide afforded a series of cationic polyelectrolytes (CPEs) in excellent yields. These CPEs, upon the acidic hydrolysis of the pendent ester groups, gave the corresponding pH‐responsive cationic acid salts, which, upon a treatment with sodium hydroxide, were converted to polybetaines (PBs), anionic polyelectrolytes (APEs), and PB/APE polymers containing various proportions of zwitterionic (PB) and anionic fractions (APE) in the polymer chain. At a shear rate of 0.36 s⁻¹ at 30 °C, salt‐free water solutions of the CPEs (2 g/dL) containing 8, 4, and 2.67 mol % of the single‐, twin‐, and triple‐tailed hydrophobes (all having 8 mol % octyloxy tails) had apparent viscosity values of 70, 2800, and 396,000 cps, respectively. The PB/APE polymer with a ratio of 33:67 for the zwitterionic and anionic fractions in the polymer chain gave the highest viscosity value. The superior viscosity behavior of the polymers containing the triple‐tailed hydrophobe was attributed to the blocky nature of the comonomer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5480–5494, 2006     

Recent progress in EPR study of spin labeled polymers and spin probed polymer systems

The EPR technique is commonly used for the detection and characterization of paramagnetic centers in chemical science. This method can provides a lot of information, such as identity, structure, dynamics, interaction, orientation, glass transition temperature, adsorption behavior, functionality, phase behavior, nano-inhomogeneities, and conformation of the free-radical portion of the polymer chain. Most polymers intrinsically possess diamagnetic properties, so in order to study polymers with EPR, paramagnetic centers need to be incorporated into the polymer systems. Spin labeling and spin probing are main methods of covalently attaching paramagnetic centers to polymer chains or embedding them in polymer matrices through non-covalent interactions, respectively. Spin labeling and spin probing techniques for polymers and polymer systems (especially with nitroxide radicals) have also been studied, which have a profound impact on polymer science. This review focuses on the continuous wave EPR technique and introduces the recent advances in spin labeled polymers and spin probed polymer systems in EPR research.