GEANT4 Simulation of the High-Energy Neutron Beam of the TOF Spectrometer GNEIS

Using the Geant4 software package, a numerical simulation of a neutron source of the time-offlight spectrometer GNEIS created on the basis of the SC-1000 synchrocyclotron with 1 GeV proton energy at the NRC Kurchatov Institute—PNPI (Gatchina) has been carried out. The influence of the structural features of the neutron source of the spectrometer on the spatial and energy distributions of neutrons has been studied. The intensity and spectral characteristics of the neutron flux in the range of 1–1000 MeV have been determined on the basis of the obtained information and detailed allowance for all elements of the neutron beam guide system. It is found that the best agreement between the experiment and calculation performed by means of Geant4 is observed when using the QGSP_INCLXX_HP model. In the neutron energy range of 1–200 MeV, the difference between the experimental and calculated shapes of the spectra is less than 25%.     

Test facility for nuclear planetology instruments

An experimental facility for testing and calibrating nuclear planetology instruments has been constructed in partnership between the Space Research Institute (Moscow) and the Joint Institute for Nuclear Research. A model of Martian soil with a size of 3.82 × 3.21 m² and an overall mass of about 30 t is assembled from silicate glass. Glass is chosen in order to imitate absolutely dry soil close in composition to the Martian one. The heterogeneous model allows one to imitate the average elemental composition of Martian soil in the best possible way by adding layers of the necessary materials to it. Near-surface water ice is simulated by polyethylene layers buried at different depths within the glass model. A portable neutron generator is used as the neutron source for testing active neutron and gamma spectrometers. The facility is radiation-hazardous and is thus equipped with interlock and radiation monitoring systems in accordance with the effective regulations.     

锂玻璃探测器中子探测效率的刻度

为了精确测量keV能区的中子俘获截面,中国原子能科学研究院正在建造一台4π 全吸收型γ 探测装置---GTAF,锂玻璃探测器将会作为中子束流监视器测量中子能谱。利用5SDH-2 加速器刻度了锂玻璃探测器在两个入射中子单能点(250 和565 keV) 的探测效率,并使用EANT4 和MCNP 程序模拟计算了锂玻璃探测器的相对探测效率。通过归一化实验数据和模拟结果,得到了锂玻璃探测器在10keV~1 MeV 能区的中子探测效率曲线。对于把锂玻璃探测器测量得到的飞行时间谱转化为中子束流能谱,是一项非常重要的工作,同时为探测器效率刻度提供了新方法。In order to accurately measure the neutron capture cross section in the energy range of keVMeV, 4 πgamma-ray total absorption facility (GTAF) is being constructed at China Institute of Atomic Energy (CIAE). The lithium glass detector will be used as a neutron beam monitor for GTAF. The detection efficiency of the lithium glass detector at two incident neutron energy points (250, 565 keV) was calibrated in 5SDH-2 accelerator, and the relative detection efficiency was simulated by GEANT4 and MCNP code. By the normalization of the experimental data and simulation result, the neutron detection efficiency curve of the lithium glass detector between 10 keV and 1 MeV was obtained. This work will be important to convert the Time-of-flight spectrum that be measured by Li-glass detector to the energy spectrum of neutron beam, and provide the new method for calibration of detection efficiency.     

Designing Klod detector prototypes and results of their experimental tests

The projected KLOD facility is intended for finding and investigating the ultrarare decay K _L ⁰ → π⁰ν$ \bar \nu $ \bar \nu ; its branching ratio predicted by the Standard Model is Br = (3.0 ± 0.6) × 10⁻¹¹. Designing and testing the prototype of the decay-volume veto system and beam veto calorimeter, which are the most important detectors of the facility, are considered. It is shown that the proposed beam veto calorimeter is able to detect γ rays with a high efficiency at the neutron flux of 300 MHz.     

Noise spectrum of the 140-GHz gyrotron designed for controlled thermonuclear fusion installations

A method for measurement of gyrotron amplitude noise using the Mach-Zehnder interferometer as a rejection filter, the measurement facility, and results of testing a 140-GHz industrial high-power gyrotron are discussed. The method improved the sensitivity by two orders of magnitude over that of the direct detection method. The experimental relative power spectral density in a frequency range of 50–250 MHz from the line center is 7 × 10⁻²⁰–5 × 10⁻¹⁹ 1/Hz.     

PNPI differential EDM spectrometer and latest results of measurements of the neutron electric dipole moment

In this work, the double chamber magnetic resonance spectrometer of the Petersburg Nuclear Physics Institute (PNPI) designed to measure the neutron electric dipole moment (EDM) is briefly described. A method for long storage of polarized ultracold neutrons in a resonance space with a superposed electric field collinear to the leading magnetic field is used. The results of the measurements carried out on the ILL reactor (Grenoble, France) are interpreted as the upper limit of the value of neutron EDM |d_n| < 5.5 × 10^–26 e cm at the 90% confidence level.     

First experimental observations of neutron bursts under thunderstorm clouds near sea level

The connection of short-term neutron bursts near sea level with the electric and geomagnetic atmospheric fields during thunderstorms in 2009–2011 has been experimentally studied. The data from the cosmic-ray spectrograph named after Kuzmin, an electrostatic fluxmeter, and a three-component fluxgate magnetometer in Yakutsk have been analyzed. It has been shown that short-term (no longer than 4 min) neutron bursts are due to negative lightning discharges. The bursts are detected at the ground level 1–3 km below thunderstorm clouds. In this case, the neutron flux is about 4 × 10⁻³ cm⁻² s⁻¹. The minimum energy of the neutrons that are efficiently detected by the monitor is about 10 MeV. It has been found that short-term neutron bursts are detected when the electric field strength reaches a threshold value of −16 kV/m.     

Variations in the parameters of scattered signals and the ionosphere connected with plasma modification by high-power radio waves

We describe the results of using the incoherent scatter technique to observe time-altitude variations in regular parameters of the ionospheric plasma and wave disturbances, which accompanied periodic modification of the near-Earth plasma by radio waves emitted by the “Sura” facility. A distinctive feature of the experiments was that the processes in the ionosphere were diagnosed at a distance of about 1000 km from the facility. It was found that the spectrum composition of wave disturbances in the electron density was changing noticeably during the active experiment. Quasi-periodic processes in the ionosphere were observed with a delay of about 40–60 min. The relative amplitude of wave disturbances was equal to 0.02–0.10, and the periods were equal to 30, 60, 120, and 150–180 min. The observed effect can be explained by the generation and/or amplification of traveling ionospheric disturbances. The results of theoretical estimations agree well with the observational data.     

Helium-hydrogen synergistic effects on swelling in in-situ multiple-ion beams irradiated steels

The development of reliable fusion energy is one of the most important challenges in this century. The accelerated degradation of structural materials in fusion reactors caused by neutron irradiation would cause severe problems. Due to the lack of suitable fusion neutron testing facilities, we have to rely on ion irradiation experiments to test candidate materials in fusion reactors. Moreover, fusion neutron irradiation effects are accompanied by the simultaneous transmutation production of helium and hydrogen. One important method to study the He-H synergistic effects in materials is multiple simultaneous ion beams (MSIB) irradiation that has been studied for decades. To date, there is no convincing conclusion on these He-H synergistic effects among these experiments. Recently, a multiple ion beam in-situ transmission electron microscopy (TEM) analysis facility was developed in Xiamen University (XIAMEN facility), which is the first triple beam system and the only in-running in-situ irradiation facility with TEM in China. In this work, we conducted the first high-temperature triple simultaneous ion beams irradiation experiment with TEM observation using the XIAMEN facility. The responses to in-situ triple-ion beams irradiation in austenitic steel 304L SS and ferritic/martensitic steel CLF-1 were studied and compared with the results in dual- and single-ion beam(s) irradiated steels. Synergistic effects were observed in MSIB irradiated steels. Helium was found to be critical for cavity formation, while hydrogen has strong synergistic effect on increasing swelling.     

New measurements of the neutron electric dipole moment

We report a new measurement of the neutron electric dipole moment with the PNPI EDM spectrometer using the ultracold neutron source PF2 at the research reactor of the ILL. Its first results can be interpreted as a limit on the neutron electric dipole moment of |d _n | < 5.5 × 10^?26 e cm (90% confidence level).     

Radiation damage of material surfaces under prolonged irradiation with He+ and Ar+ ions with broad energy spectra

The results of studying the redistribution of Be, Al, Ti, Fe, Cu, Zr, Mo, and W atoms incorporated in polycrystalline metal samples under irradiation with He⁺, (He⁺ + Ar⁺), and Ar⁺ ion beams with a broad energy spectrum and an average energy of 10 keV at irradiation doses of 1 × 10²¹ ion/cm² are studied. It is discovered that irradiation at doses exceeding 1 × 10¹⁹ ion/cm² results in local small-crystal formations being produced in a near-surface substrate layer. Their typical dimensions are less than 1–5 μm, and their the density is up to 1–100. They contain incorporated atoms and impurity atoms with a concentration of 0.1–10 at %. Subsequent irradiation at a dose of 1 × 10²⁰ ions/cm² or more leads to disappearance of these formations, mainly because of sputtering processes.     

Radiation of pulsed and glow discharges in CCl4

The radiation of a pulsed-periodic discharge in CCl₄ has been investigated. Its spectrum is found to differ considerably from the spectrum of the glow discharge. It is found that ‖60% of the energy from the 215–650 nm region falls in the UV spectrum. Moscow Physicotechnical Institute, 9, Institutskii Per., Dolgoprudnyi, 141701, Moscow Region, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 2, pp. 302–305, March–April, 1998.     

Recent Result of Muon Catalyzed t–t Fusion at RIKEN-RAL

We have measured X-rays and neutrons associated with the muon catalyzed t–t fusion process at the RIKEN-RAL Muon facility. In the X-ray measurement, we observed K_α and K_β X-rays originating from the muon sticking process in muon catalyzed t–t fusion, and obtained the K_α X-ray yield and the K_β/K_α intensity ratio. An average recoil energy of the (μ⁻α) atoms in a solid T₂ medium was determined from the observed Doppler broadening width of the K_α X-ray line. The obtained t–t fusion neutron has shown an exponential time spectrum with a single component and a continuous energy spectrum with a maximum energy of 9 MeV. We have determined the t–t fusion neutron yield, the t–t fusion cycling rate and the muon sticking probability from the neutron data. The obtained maximum neutron energy is a very peculiar value from the view point of the reaction Q value (11.33 MeV) with the three-particle decay mode at the exit channel: t + t → α + n + n + Q. The obtained neutron energy distribution was analyzed by a simple model with two neutron energy components; reasonable agreement has been obtained, suggesting a strong (n–α) correlation in the exit channel of the t–t muon catalyzed fusion reaction. This revised version was published online in August 2006 with corrections to the Cover Date.     

基于D-T紧凑型中子源的快中子照相准直屏蔽体设计及中子束特性模拟研究

中子照相是一种重要的无损检测技术,它能用于火工产品、毒品和核燃料元件等的检测。基于紧凑型D-T中子发生器,完成了一个用于快中子照相的准直屏蔽体系统（BSA）的物理设计。根据D-T中子源的能谱和角分布建立了中子源模型,采用MCNP4C蒙特卡罗程序,模拟了准直屏蔽体系统中中子和γ射线的输运,准直中子束相对于单位源中子的中子注量可以达到9.30×10-6 cm-2,准直中子束中主要是能量大于10 MeV的快中子;在设置的样品平面直径14 cm的照射视野范围,准直束中子注量的不均匀度为4.30%,准直束中中子注量与γ注量的比值为17.20,中子通量和中子注量比值J/Φ为0.992,说明准直中子束有好的平行性;准直屏蔽体外的泄露中子注量率与准直束中子注量率相比降低了2个量级。所设计的准直屏蔽体能满足快中子照相的要求。Neutron radiography is an important nondestructive testing technique. It can be used to detect the explosive devices, drug and the nuclear fuel element, etc. A beam-shaping-assembly (BSA) based on a compact D-T neutron generator is designed for fast neutron radiography in this paper. D-T neutron source model is constructed based on the neutron energy spectrum and angular distribution data. The transportation of neutron and γ-ray in the BSA is simulated using MCNP4C code. The neutron fluence of the collimated neutron beam with respect to the neutron source of the unit source is 9.30×10-6 cm-2. The collimated neutron beams is mainly fast neutrons with energies greater than 10 MeV. In the irradiation field range with a diameter of 14 cm, the neutron fluence uniformity of the collimated beam is 4.3%, the ratio of the neutron fluence to the gamma fluence in the collimated beam is 17.20, and the neutron flux and the neutron fluence ratio (J/Φ) is 0.992 which indicates that the collimated neutron beam has good parallelism. The leakage neutron fluence in outside of BSA is two orders of magnitude lower than that of the collimated neutron beam. The designed BSA can meet the need of fast neutron radiography.     

Wear resistance of the ion-modified surface of zirconium-alloy tubes irradiated by He+ and Ar+ ion beams with wide energy spectra

The results of investigating the wear resistance of E110 alloy samples irradiated by a He⁺ + Ar⁺ beam with a wide energy spectrum are presented. Surface modification under irradiation by an Ar⁺ beam at doses higher than 2 × 10¹⁸ ion/cm² is shown to cause substantial enhancement of the wear resistance of samples because the structural homogeneity of near surface layers increases, the surface roughness decreases, and its microhardness increases. The application of a mechanical-geometrical wear model based on the experimental wear characteristics determined during accelerated tests indicates that the thinning of an alloy cladding can reach rates of 10⁻⁶–10⁻³ mm/s, which agree satisfactorily with data obtained in other simulation experiments. The presence of an oxide film changes a wear process characterized by an abrasive component.     

Effect of neutron irradiation on the IR absorption spectra of cupric oxide single crystals

A strong increase of the absorption coefficient with photon energy increasing from 0.1 to 1.0 eV is observed in the spectra of CuO single crystals irradiated with neutrons to a fluence of 5×10¹⁸ cm⁻². The difference of the absorption coefficients before and after irradiation depends on the wavelength as λ⁻². The effect of neutron irradiation on CuO is qualitatively similar to that of neutrons on other semiconductors (for example, GaAs) and differs from that obtained by irradiating CuO with charged particles. Zh. Tekh. Fiz. 69, 98–99 (December 1999)     

Direct patterning of gold oxide thin films by focused ion-beam irradiation

For direct writing of electrically conducting connections and areas into insulating gold oxide thin films a scanning Ar⁺ laser beam and a 30 keV Ga⁺ focused ion beam (FIB) have been used. The gold oxide films are prepared by magnetron sputtering under argon/oxygen plasma. The patterning of larger areas (dimension 10–100 μm) has been carried out with the laser beam by local heating of the selected area above the decomposition temperature of AuO_x (130–150 °C). For smaller dimensions (100 nm to 10 μm) the FIB irradiation could be used. With both complementary methods a reduction of the sheet resistance by 6–7 orders of magnitude has been achieved in the irradiated regions (e.g. with FIB irradiation from 1.5×10⁷ Ω/□ to approximately 6 Ω/□). The energy-dispersive X-ray analysis (EDX) show a considerably reduced oxygen content in the irradiated areas, and scanning electron microscopy (SEM), as well as atomic force microscopy (AFM) investigations, indicate that the FIB patterning in the low-dose region (10¹⁴ Ga⁺/cm²) is combined with a volume reduction, which is caused by oxygen escape rather than by sputtering. Received: 30 May 2000 / Accepted: 31 May 2000 / Published online: 13 July 2000     

Hadrons with energies higher than 50 MeV in EASes with <Emphasis Type="Italic">N</Emphasis><Subscript><Emphasis Type="Italic">e</Emphasis></Subscript> = 10<Superscript>5</Superscript>–10<Superscript>7</Superscript>

Characteristics of the hadronic component of EASes with hadron energies E _h > 50 MeV were measured on the CARPET-2 complex shower array at the Baksan Neutrino Observatory of the Institute for Nuclear Research, Russian Academy of Sciences. Hadrons were registered using a 6-NM-64 neutron monitor; the data collection system of this array enables us to register the time intervals between pulses of neutron monitor counters with an error of up to 1 μs. For EASes with N _e = 10⁵–10⁷ whose axes are located in CARPET, we obtain the dependence of the mean neutron multiplicity in the neutron monitor on the total number of charged particles in the EAS.     

Beam experiments with a non-intercepting beam induced f luorescence profile monitor for the ADS LINAC

An accelerator-driven subcritical system(ADS) project was launched in China in 2011, aiming to design and build an ADS demonstration facility with the capability of more than 1000 MW thermal power. The driver linac is defined to be a 10 m A current of high energy protons at 1.5 Ge V in continuous wave operation mode. To meet the extremely high power and intense beam accelerator requirements, non-interceptive monitors for the beam transverse profile are required for this proton linac. Taking advantage of the residual gas as active material, the Beam Induced Fluorescence(BIF) monitor exploits gas-excited fluorescence in the visible spectrum region for transverse profile measurements. The advantages of this non-intercepting method are that nothing is installed in the vacuum pipe,component design is compact and there is no need for expensive signal processing electronics. Beam experiments have been performed under constant beam conditions. The helium spectrum has been verified with different optical filters, showing that a proper optical band-pass filter covering 400–500 nm is necessary for fluorescence experiments with helium. By changing gas pressure, it is shown that gas pressure is proportional to the signal amplitude but has no influence on detected profile width. Finally, a comparison experiment between the BIF monitor and a wire scanner shows that the detected profile width results of both methods agree well.     

基于北京大学4.5 MV静电加速器的核技术应用

北京大学4.5 MV静电加速器是20世纪80年代我国自主研发的静电加速器。该器端电压在0.7~3.8 MV连续可调,主要加速氢/氦同位素离子,并可通过打靶产生准单能直流/脉冲中子场,具有多条束线及多个实验终端。该器作为开放仪器多年来为国内外从事核技术研究的团队提供了实验平台。近年来,针对我国在能源、航天和国防等领域材料研究的重要需求,该器进行了多次升级改造。一方面通过产生7 MeV以下和14~19 MeV的准单能中子场,应用于(n, a)核反应截面的测量和聚变堆中子谱仪刻度;另一方面,通过温控辐照、核反应分析等实验终端,实现了材料辐照损伤及聚变堆材料元素定量分析等研究方向的功能拓展。此外,设计新增用于半导体材料电学性能测试的原位在线辐照终端和用于研究材料微观尺度元素分布的离子束综合分析实验终端。目前部分新终端已设计组装完成,相关搭建和调试工作正在进行中。