Coverage-Controlled Superstructures of C3-Symmetric Molecules: Honeycomb versus Hexagonal Tiling

The competition between honeycomb and hexagonal tiling of molecular units can lead to large honeycomb superstructures on surfaces. Such superstructures exhibit pores that may be used as 2D templates for functional guest molecules. Honeycomb superstructures of molecules that comprise a C₃ symmetric platform on Au(111) and Ag(111) surfaces are presented. The superstructures cover nearly mesoscopic areas with unit cells containing up to 3000 molecules, more than an order of magnitude larger than previously reported. The unit cell size may be controlled by the coverage. A fairly general model was developed to describe the energetics of honeycomb superstructures built from C₃ symmetric units. Based on three parameters that characterize two competing bonding arrangements, the model is consistent with the present experimental data and also reproduces various published results. The model identifies the relevant driving force, mostly related to geometric aspects, of the pattern formation.     

Synthesis of Enantiopure C3‐Symmetric Triangular Molecules

An asymmetric synthesis of C ₃‐symmetric triangular macrocycles is reported. 1‐Methylsulfonyl‐4‐(4‐vinylphenyl)‐1,2,3‐triazole undergoes a rhodium(II)‐catalyzed cyclotrimerization to establish an enantiopure C ₃‐symmetric triangular macrocycle motif. This method can be applied to the synthesis of an enantiopure hydrocarbon, which owes its chirality to asymmetric distribution of H/D atoms on the benzene rings.     

On‐Surface Self‐Assembly of a C3‐Symmetric π‐Conjugated Molecule Family Studied by STM: Two‐Dimensional Nanoporous Frameworks

The on‐surface self‐assembled behavior of four C ₃‐symmetric π‐conjugated planar molecules ( Tp , T12 , T18 , and Ex ) has been investigated. These molecules are excellent building blocks for the construction of noncovalent organic frameworks in the bulk phase. Their hydrogen‐bonded 2D on‐surface self‐assemblies are observed under STM at the solid/liquid interface; these structures are very different to those in the bulk crystal. Upon combining the results of STM measurements and DFT calculations, the formation mechanism of different assemblies is revealed; in particular, the critical role of hydrogen bonding in the assemblies. This research provides us with not only a deep insight into the self‐assembled behavior of these novel functional molecules, but also a convenient approach toward the construction of 2D multiporous networks.     

Protecting‐Group‐Controlled Surface Chemistry—Organization and Heat‐Induced Coupling of 4,4′‐Di(tert‐butoxycarbonylamino)biphenyl on Metal Surfaces

Like pearls on a string , molecular building blocks have been preorganized and then interlinked on a surface (see STM images). In this way both the supramolecular self‐assembly of the reactants as well as the subsequent thermal activation to release the protecting group are controlled.

     

C3‐Symmetric Tricyclo[2.2.1.02,6]heptane‐3,5,7‐triol

A straightforward access to a hitherto unknown C ₃‐symmetric tricyclic triol both in racemic and enantiopure forms has been developed. Treatment of 7‐tert ‐butoxynorbornadiene with peroxycarboxylic acids provided mixtures of C ₁‐ and C ₃‐symmetric 3,5,7‐triacyloxynortricyclenes via transannular π‐cyclization and replacement of the tert ‐butoxy group. By refluxing in formic acid, the C ₁‐symmetric esters were converted to the C ₃‐symmetric formate. Hydrolysis gave diastereoisomeric triols, which were separated by recrystallization. Enantiomer resolution via diastereoisomeric tri(O ‐methylmandelates) delivered the target triols on a gram scale. The pure enantiomers are useful as core units of dopants for liquid crystals.     

Catalytic Asymmetric Reductive Condensation of N–H Imines: Synthesis of C2‐Symmetric Secondary Amines

A highly diastereoselective and enantioselective Brønsted acid catalyzed reductive condensation of N?H imines was developed. This reaction is catalyzed by a chiral disulfonimide (DSI), uses Hantzsch esters as a hydrogen source, and delivers useful C₂‐symmetric secondary amines.     

Investigation of the Effect of Thermal Annealing on Poly(3‐hexylthiophene) Nanofibers by Scanning Probe Microscopy: From Single‐Chain Conformation and Assembly Behavior to the Interfacial Interactions with Graphene Oxide

Poly(3‐hexylthiophene) (P3HT) has been widely used in devices owing to its excellent properties and structural features. However, devices based on pure P3HT have not exhibited high performance. Strategies, such as thermal annealing and surface doping, have been used to improve the electrical properties of P3HT. In this work, different from previous studies, the effect of thermal annealing on P3HT nanofibers are examined, ranging from the single polymer chain conformation to chain packing, and the interfacial interactions with graphene oxide (GO) at nanoscale dimensions, by using scanning tunneling microscopy (STM), atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM). High‐resolution STM images directly show the conformational changes of single polymer chains after thermal annealing. The morphology of P3HT nanofibers and the surface potential changes of the P3HT nanofibers and GO is further investigated by AFM and KPFM at the nanoscale, which demonstrate that the surface potentials of P3HT decrease, whereas that of GO increases after thermal annealing. All of the results demonstrate the stronger interfacial interactions between P3HT and GO occur after thermal treatments due to the changes in P3HT chain conformation and packing order.     

Synthesis of π‐Functional Molecules through Oxidation of Aromatic Amines

In this review, we focus on the synthesis of π‐conjugated functional molecules by the oxidation of aromatic amines, which is one of the most effective methods for the construction of C?C, C?N, and N?N bonds between two π‐conjugated molecular units, and consider their characteristics and applications. Polyanilines are the most common products of the oxidation of aromatic amines; however, azobenzenes, phenazines, and 1,1′‐binaphthyl‐2,2′‐diamines may be produced in this manner also, depending on the reaction conditions. Recent advances in the methodology of aniline oxidation have led to the development of high‐regioselectivity industrial‐scale syntheses of optically or electroactive π‐functional dyes containing nitrogen atoms. In particular, the regioselective fusion of π‐extended aromatic amines can be used to prepare distorted π‐conjugated molecules under mild reaction conditions, allowing the construction of unprecedented curved nitrogen‐containing π‐conjugated molecules.     

Chain Architecture Dependent 3‐Dimensional Supramolecular Assembly of Rod‐Coil Molecules with a Conjugated Hexa‐p‐phenylene Rod

Summary: We have prepared hexa‐p‐phenylene based rod‐coil molecules with identical coil volume fractions, but different poly(propylene oxide) (PPO) coil architectures (linear versus dibranched), and investigated their self‐assembling behavior in the solid state by small angle X‐ray scattering (SAXS) and transmission electron microscopy (TEM) techniques. Rod‐coil molecules with a linear PPO coil showed a honeycomb‐like lamellar assembly of rod segments with hexagonally arrayed PPO coil perforations. In contrast, the rod‐coil molecules with dibranched PPO coils self‐organized into rod bundles with a body centered tetragonal symmetry surrounded by a PPO coil matrix. These results demonstrate that the steric hindrance at the rod/coil interface arising from coil architectural variation is a dominant parameter governing supramolecular rod assembly in the rod‐coil system.

TEM images and schematic illustrations of the self‐assembled structures of rod‐coil molecules with linear (left) and dibranched (right) PPO coils, respectively.     

Synthesis of Fan‐Shaped C3 Molecule with Three Glycyrrhetinic Acid Units and Self‐Assembly Properties

A novel fan‐shaped C₃ molecule with three glycyrrhetinic acid units was synthesized via "click chemistry" in high yield and the self‐assembly characteristics were studied in different mixed solvents.     

Multilayer Films with Nanocontainers: Redox‐Controlled Reversible Encapsulation of Guest Molecules

Stable multilayer films with cucurbit[8]uril have been fabricated on the basis of the alternating layer‐by‐layer assembly of a novel side‐chain pseudopolyrotaxane and a photoreactive polyanion. The as‐prepared multilayer films exhibit good properties as surface‐imprinted multilayers, because cucurbit[8]uril molecules that are locked inside the multilayers can act as nanocontainers with specific binding to certain guest molecules, and the loading and release of the guest is redox‐controllable and reversible.     

Formation of Fluorinated Amido Esters through Unexpected C3−C4 Bond Fission in 4‐Trifluoromethyl‐3‐oxo‐β‐lactams

4‐Trifluoromethyl‐3‐oxo‐β‐lactams were unexpectedly transformed into 2‐[(2,2‐difluorovinyl)amino]‐2‐oxoacetates as major products, accompanied by minor amounts of 2‐oxo‐2‐[(2,2,2‐trifluoroethyl)amino]acetates, upon treatment with alkyl halides and triethylamine in DMSO. This peculiar C3?C4 bond fission reactivity was investigated in‐depth, from both an experimental and a computational point of view, in order to shed light on the underlying reaction mechanism.     

Self‐Assembled Fluorescent Nanoparticles from π‐Conjugated Small Molecules: En Route to Biological Applications

Since the development of supramolecular chemical biology, self‐organised nano‐architectures have been widely explored in a variety of biomedical applications. Functionalized synthetic molecules with the ability of non‐covalent assembly in an aqueous environment are typically able to interact with biological systems and are therefore especially interesting for their use in theranostics. Nanostructures based on π‐conjugated oligomers are particularly promising as theranostic platforms as they bear outstanding photophysical properties as well as drug loading capabilities. This Feature Article provides an overview on the recent advances in the self‐assembly of intrinsically fluorescent nanoparticles from π‐conjugated small molecules such as fluorene or perylene based chromophores for biomedical applications.

     

Hierarchical Self‐Assembly of Supramolecular Helical Fibres from Amphiphilic C3‐Symmetrical Functional Tris(tetrathiafulvalenes)

The preparation and self‐assembly of the enantiomers of a series of C₃‐symmetric compounds incorporating three tetrathiafulvalene (TTF) residues is reported. The chiral citronellyl and dihydrocitronellyl alkyl chains lead to helical one dimensional stacks in solution. Molecular mechanics and dynamics simulations combined with experimental and theoretical circular dichroism support the observed helicity in solution. These stacks self‐assemble to give fibres that have morphologies that depend on the nature of the chiral alkyl group and the medium in which the compounds aggregate. An inversion of macroscopic helical morphology of the citronellyl compound is observed when compared to analogous 2‐methylbutyl chains, which is presumably a result of the stereogenic centre being further away from the core of the molecule. This composition still allows both morphologies to be observed, whereas an achiral compound shows no helicity. The morphology of the fibres also depends on the flexibility at the chain ends of the amphiphilic components, as there is not such an apparently persistent helical morphology for the dihydrocitronellyl derivative as for that prepared from citronellyl chains.     

Bridgehead Substitution via Putative Norborn‐1‐en‐3‐ones: Application in the Synthesis of Complex Molecules

The base‐mediated formation of a bridgehead double bond in a bicyclo[2.2.1]heptane system (anit‐Bredt molecules) is described. The synthesis of exocyclic norbornyl enones by Wittig reaction of α‐diketones is reported. These enones and their Michael adducts are used as substrates for the generation of transient bridgehead enones and their trapping with MeOH and H₂O. Bridgehead alcohols are easily synthesized from norbornyl enones and are exploited for the diversity oriented synthesis of frameworks of natural and unnatural products.     

Investigation on the Surface‐Confined Self‐Assembly Stabilized by Hydrogen Bonds of Urea and Amide Groups: Quantitative Analysis of Concentration Dependence of Surface Coverage

Formation of a hydrogen‐bond network via an amide group is a key driving force for the nucleation–elongation‐type self‐assembly that is often seen in biomolecules and artificial supramolecular assemblies. In this work, rod‐coil‐like aromatic compounds bearing an amide ( 1 a – 3 a ) or urea group ( 1 u – 3 u ) were synthesized, and their self‐assemblies on a 2‐D surface were investigated by scanning tunneling microscopy (STM). According to the quantitative analysis of the concentration dependence of the surface coverage, it was revealed that the strength of the hydrogen bond (i.e., amide or urea) and the number of non‐hydrogen atoms in a molecular component (i.e., size of core and length of alkyl side chain) play a primary role in determining the stabilization energy during nucleation and elongation processes of molecular ordering on the HOPG surface.     

Design of Aromatic Helical Polymers for STM Visualization: Imaging of Single and Double Helices with a Pattern of π–π Stacking

From scanning tunneling microscopy (STM) images of rationally designed helical polymers with a pattern of π–π stacking, we successfully identified the single‐ and double‐helical superstructures. The STM images of the helical structures revealed the smallest helical architecture (diameter ca. 1.3 nm) that has been seen so far. Furthermore, the interconversion of single and double helices was further underpinned by experimental analyses. Significantly, the formation of double helices induced different supramolecular chirality to that observed for the single helices.