Highly Mesoporous Metal-Organic Frameworks as Synergistic Multimodal Catalytic Platforms for Divergent Cascade Reactions

Rational engineering and assimilation of diverse chemo- and biocatalytic functionalities in a single nanostructure is highly desired for efficient multistep chemical reactions but has so far remained elusive. Here, we design and synthesize multimodal catalytic nanoreactors (MCNRs) based on a mesoporous metal-organic framework (MOF). The MCNRs consist of customizable metal nanocrystals and stably anchored enzymes in the mesopores, as well as coordinatively unsaturated cationic metal MOF nodes, all within a single nanoreactor space. The highly intimate and diverse catalytic mesoporous microenvironments and facile accessibility to the active site in the MCNR enables the cooperative and synergistic participation from different chemo- and biocatalytic components. This was shown by one-pot multistep cascade reactions involving a heterogeneous catalytic nitroaldol reaction followed by a [Pd/lipase]-catalyzed chemoenzymatic dynamic kinetic resolution to yield optically pure (>99 % ee) nitroalcohol derivatives in quantitative yields.     

Chiral Metal–Organic Frameworks Bearing Free Carboxylic Acids for Organocatalyst Encapsulation

Two chiral carboxylic acid functionalized micro‐ and mesoporous metal–organic frameworks (MOFs) are constructed by the stepwise assembly of triple‐stranded heptametallic helicates with six carboxylic acid groups. The mesoporous MOF with permanent porosity functions as a host for encapsulation of an enantiopure organic amine catalyst by combining carboxylic acids and chiral amines in situ through acid–base interactions. The organocatalyst‐loaded framework is shown to be an efficient and recyclable heterogeneous catalyst for the asymmetric direct aldol reactions with significantly enhanced stereoselectivity in relative to the homogeneous organocatalyst.     

A Metal–Organic Framework Containing Unusual Eight‐Connected Zr–Oxo Secondary Building Units and Orthogonal Carboxylic Acids for Ultra‐sensitive Metal Detection

Two metal–organic frameworks (MOFs) with Zr–oxo secondary building units (SBUs) were prepared by using p,p′‐terphenyldicarboxylate (TPDC) bridging ligands pre‐functionalized with orthogonal succinic acid (MOF‐ 1 ) and maleic acid groups (MOF‐ 2 ). Single‐crystal X‐ray structure analysis of MOF‐ 1 provides the first direct evidence for eight‐connected SBUs in UiO‐type MOFs. In contrast, MOF‐ 2 contains twelve‐connected SBUs as seen in the traditional UiO MOF topology. These structural assignments were confirmed by extended X‐ray absorption fine structure (EXAFS) analysis. The highly porous MOF‐ 1 is an excellent fluorescence sensor for metal ions with the detection limit of <0.5 ppb for Mn²⁺and three to four orders of magnitude greater sensitivity for metal ions than previously reported luminescent MOFs.     

Effective and Selective Catalysts for Cinnamaldehyde Hydrogenation: Hydrophobic Hybrids of Metal–Organic Frameworks,Metal Nanoparticles,and Micro‐ and Mesoporous Polymers

Metal–organic frameworks (MOFs) as selectivity regulators for catalytic reactions have attracted much attention, especially MOFs and metal nanoparticle (NP) shelled structures, e.g., MOFs@NPs@MOFs. Nevertheless, making hydrophilic MOF shells for gathering hydrophobic reactants is challenging. Described here is a new and viable approach employing conjugated micro‐ and mesoporous polymers with iron(III) porphyrin (FeP‐CMPs) as a new shell to fabricate MIL‐101@Pt@FeP‐CMP. It is not only hydrophobic and porous for enriching reactants, but also possesses iron sites to activate C=O bonds, thereby regulating the selectivity for cinnamyl alcohol in the hydrogenation of cinnamaldehyde. Interestingly, MIL‐101@Pt@FeP‐CMP^sponge can achieve a high turnover frequency ( 1516.1 h⁻¹), with 97.3 % selectivity for cinnamyl alcohol at 97.6 % conversion.     

Effective and Selective Catalysts for Cinnamaldehyde Hydrogenation: Hydrophobic Hybrids of Metal–Organic Frameworks,Metal Nanoparticles,and Micro‐ and Mesoporous Polymers

Metal–organic frameworks (MOFs) as selectivity regulators for catalytic reactions have attracted much attention, especially MOFs and metal nanoparticle (NP) shelled structures, e.g., MOFs@NPs@MOFs. Nevertheless, making hydrophilic MOF shells for gathering hydrophobic reactants is challenging. Described here is a new and viable approach employing conjugated micro‐ and mesoporous polymers with iron(III) porphyrin (FeP‐CMPs) as a new shell to fabricate MIL‐101@Pt@FeP‐CMP. It is not only hydrophobic and porous for enriching reactants, but also possesses iron sites to activate C=O bonds, thereby regulating the selectivity for cinnamyl alcohol in the hydrogenation of cinnamaldehyde. Interestingly, MIL‐101@Pt@FeP‐CMP^sponge can achieve a high turnover frequency ( 1516.1 h^?1), with 97.3 % selectivity for cinnamyl alcohol at 97.6 % conversion.     

Graphene‐Supported Ultrafine Metal Nanoparticles Encapsulated by Mesoporous Silica: Robust Catalysts for Oxidation and Reduction Reactions

Graphene nanosheet‐supported ultrafine metal nanoparticles encapsulated by thin mesoporous SiO₂ layers were prepared and used as robust catalysts with high catalytic activity and excellent high‐temperature stability. The catalysts can be recycled and reused in many gas‐ and solution‐phase reactions, and their high catalytic activity can be fully recovered by high‐temperature regeneration, should they be deactivated by feedstock poisoning. In addition to the large surface area provided by the graphene support, the enhanced catalytic performance is also attributed to the mesoporous SiO₂ layers, which not only stabilize the ultrafine metal nanoparticles, but also prevent the aggregation of the graphene nanosheets. The synthetic strategy can be extended to other metals, such as Pd and Ru, for preparing robust catalysts for various reactions.     

Boosting the Catalytic Performance of Metal–Organic Frameworks for Steroid Transformations by Confinement within a Mesoporous Scaffold

Solid‐state crystallization achieves selective confinement of metal–organic framework (MOF) nanocrystals within mesoporous materials, thereby rendering active sites more accessible compared to the bulk‐MOF and enhancing the chemical and mechanical stability of MOF nanocrystals. (Zr)UiO‐66(NH₂)/SiO₂ hybrid materials were tested as efficient and reusable heterogeneous catalysts for the synthesis of steroid derivatives, outperforming the bulk (Zr)UiO‐66(NH₂) MOF. A clear correlation between the catalytic activity of the dispersed Zr sites present in the confined MOF, and the loading of the mesoporous SiO₂, is demonstrated for steroid transformations.     

Flexible and Hierarchical Metal–Organic Framework Composites for High‐Performance Catalysis

The development of porous composite materials is of great significance for their potentially improved performance over those of individual components and extensive applications in separation, energy storage, and heterogeneous catalysis. Now mesoporous metal–organic frameworks (MOFs) with macroporous melamine foam (MF) have been integrated using a one‐pot process, generating a series of MOF/MF composite materials with preserved crystallinity, hierarchical porosity, and increased stability over that of melamine foam. The MOF nanocrystals were threaded by the melamine foam networks, resembling a ball‐and‐stick model overall. The resulting MOF/MF composite materials were employed as an effective heterogeneous catalyst for the epoxidation of cholesteryl esters. Combining the advantages of interpenetrative mesoporous and macroporous structures, the MOF/melamine foam composite has higher dispersibility and more accessibility of catalytic sites, exhibiting excellent catalytic performance.     

Enantioselective Dearomatization of Naphthol Derivatives with Allylic Alcohols by Cooperative Iridium and Brønsted Acid Catalysis

The combination of a transition‐metal catalyst and organocatalyst was designed to achieve a highly enantioselective system for the allylic dearomatization reaction of naphthols with racemic secondary allylic alcohols. The desired β‐naphthalenones, bearing an all‐carbon quaternary center, were obtained in good yields with high chemo‐ and enantioselectivities. The cooperative catalytic system, involving a chiral iridium complex and phosphoric acid, provided measurable improvements in yields, and chemo‐ and enantioselectivities relative to single‐catalyst systems. Control experiments indicated that the chiral iridium complex functions as a key species in the control of the absolute configuration, thus enabling the formation of both β‐naphthalenone enantiomers by simply employing opposite enantiomeric ligands.     

Hydrolytic Transformation of Microporous Metal–Organic Frameworks to Hierarchical Micro‐ and Mesoporous MOFs

A new approach to the synthesis of hierarchical micro‐ and mesoporous MOFs from microporous MOFs involves a simple hydrolytic post‐synthetic procedure. As a proof of concept, a new microporous MOF, POST‐66(Y), was synthesized and its transformation into a hierarchical micro‐ and mesoporous MOF by water treatment was studied. This method produced mesopores in the range of 3 to 20 nm in the MOF while maintaining the original microporous structure, at least in part. The degree of micro‐ and mesoporosity can be controlled by adjusting the time and temperature of hydrolysis. The resulting hierarchical porous MOF, POST‐66(Y)‐wt, can be utilized to encapsulate nanometer‐sized guests such as proteins, and the enhanced stability and recyclability of an encapsulated enzyme is demonstrated.     

Fabrication of carboxymethylated cellulose fibers supporting Ag NPs@MOF‐199s nanocatalysts for catalytic reduction of 4‐nitrophenol

In this work, we prepared high‐performance and recyclable nanocatalysts that consist of small and well‐dispersed silver nanoparticles (Ag NPs) immobilized onto Cu‐ based metal–organic framework (MOF‐199 s) supported by carboxymethylated cellulose fibers (CCFs). The as‐prepared green nanohybrid catalysts, namely Ag NPs@ MOF‐199 s/CCFs, were characterized using SEM, TEM, XRD and FT‐IR techniques. The catalytic performances showed that Ag NPs@ MOF‐199 s/CCFs catalysts exhibited a very high catalytic efficiency towards the reduction of 4‐nitrophenol to 4‐aminophenol. The enhanced catalytic performances are attributed to the improved dispersity, small particles of Ag NPs stabilized by the MOF‐199 s, and the porous catalyst structures. The introduction of cellulose fiber further facilitates the reuse and sustainability of the nanohybrid catalysts, showing a stable and high reusability (more than 91% of catalytic activity) even after five runs.     

Potential Utilization of Metal–Organic Frameworks in Heterogeneous Catalysis: A Case Study of Hydrogen‐Bond Donating and Single‐Site Catalysis

Crystalline solid materials are platforms for the development of effective catalysts and have shown vast benefits at the frontiers between homogeneous and heterogeneous catalysts. Typically, these crystalline solid catalysts outperformed their homogeneous analogs due to their high stability, selectivity, better catalytic activity, reusability and recyclability in catalysis applications. This point of view, comprising significant features of a new class of porous crystalline materials termed as metal‐organic frameworks (MOFs) engendered the attractive pathway to synthesize functionalized heterogeneous MOF catalysts. The present review includes the recent research progress in developing both hydrogen‐bond donating (HBD) MOF catalysts and MOF‐supported single‐site catalysts (MSSCs). The first part deals with the novel designs of urea‐, thiourea‐ and squaramide‐containing MOF catalysts and study of their crucial role in HBD catalysis. In the second part, we discuss the important classification of MSSCs with existing examples and their use in desired catalytic reactions. In addition, we describe the relative catalytic efficiency of these MSSCs with their homogeneous and similarly reported analogs. The precise knowledge of discussed heterogeneous MOF catalysts in this review may open the door for new research advances in the field of MOF catalysis.     

Assembly of Mesoporous Metal–Organic Framework Templated by an Ionic Liquid/Ethylene Glycol Interface

We propose a facile room‐temperature synthesis of a metal–organic framework (MOF) with a bimodal mesoporous structure (3.9 and 17‐28 nm) in an ionic liquid (IL)/ethylene glycol (EG) mixture. The X‐ray diffraction analysis reveals that MOF formation can be efficiently promoted by the presence of the EG/IL interface at room temperature. The MOFs with mesoporous networks are characterized by SEM and TEM. The formation mechanism of the mesoporous MOF in EG/IL mixture is investigated. It is proposed that the EG nanodroplets in the IL work as templates for the formation of the large mesopores. The as‐synthesized mesoporous metal–organic framework is an effective and reusable heterogeneous catalyst to catalyze the aerobic oxidation of benzylic alcohols.     

Catalyst‐Controlled Switch in Chemo‐ and Diastereoselectivities: Annulations of Morita–Baylis–Hillman Carbonates from Isatins

Regulating both the chemo‐ and diastereoselectivity, divergently, of a reaction is highly attractive but extremely challenging. Presented herein is a catalyst‐controlled switch in the chemo‐ and diastereodivergent annulation reactions of Morita–Baylis–Hillman carbonates, derived from isatins and 2‐alkylidene‐1H‐indene‐1,3(2H)‐diones, in exclusive α‐regioselectivity. α‐Isocupreine efficiently catalyzed [2+1] reactions to access cyclopropane derivatives, and the diastereodivergent [3+2] annulations were accomplished by employing either a chiral phosphine or a DMAP‐type molecule. All reactions exhibited excellent chemoselectivities, and good to remarkable stereoselectivities were furnished, thus leading to a collection of compounds with skeletal and stereogenic diversity. Moreover, DFT computational calculations elucidated the catalyst‐based switch in mechanism.     

Total Syntheses of (−)‐Minovincine and (−)‐Aspidofractinine through a Sequence of Cascade Reactions

We report 8‐step syntheses of (?)‐minovincine and (?)‐aspidofractinine using easily available and inexpensive reagents and catalyst. A key element of the strategy was the utilization of a sequence of cascade reactions to rapidly construct the penta‐ and hexacyclic frameworks. These cascade transformations included organocatalytic Michael‐aldol condensation, a multistep anionic Michael‐S_N2 cascade reaction, and Mannich reaction interrupted Fischer indolization. To streamline the synthetic routes, we also investigated the deliberate use of steric effect to secure various chemo‐ and regioselective transformations.     

H2S Sensors: Fumarate‐Based fcu‐MOF Thin Film Grown on a Capacitive Interdigitated Electrode

Herein we report the fabrication of an advanced sensor for the detection of hydrogen sulfide (H₂S) at room temperature, using thin films of rare‐earth metal (RE)‐based metal–organic framework (MOF) with underlying fcu topology. This unique MOF‐based sensor is made via the in situ growth of fumarate‐based fcu ‐MOF (fum‐ fcu ‐MOF) thin film on a capacitive interdigitated electrode. The sensor showed a remarkable detection sensitivity for H₂S at concentrations down to 100 ppb, with the lower detection limit around 5 ppb. The fum‐ fcu ‐MOF sensor exhibits a highly desirable detection selectivity towards H₂S vs. CH₄, NO₂, H₂, and C₇H₈ as well as an outstanding H₂S sensing stability as compared to other reported MOFs.     

Magnetite tethered mesoionic carbene‐palladium (II): An efficient and reusable nanomagnetic catalyst for Suzuki‐Miyaura and Mizoroki‐Heck cross‐coupling reactions in aqueous medium

In this paper, a highly active, air‐ and moisture‐stable and easily recoverable magnetic nanoparticles tethered mesoionic carbene palladium (II) complex (MNPs‐MIC‐Pd) as nanomagnetic catalyst was successfully synthesized by a simplistic multistep synthesis under aerobic conditions using commercially available inexpensive chemicals for the first time. The synthesized MNPs‐MIC‐Pd nanomagnetic catalyst was in‐depth characterized by numerous physicochemical techniques such as FT‐IR, ICP‐AES, FESEM, EDS, TEM, p‐XRD, XPS, TGA and BET surface area analysis. The prepared MNPs‐MIC‐Pd nanomagnetic catalyst was used to catalyze the Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions and exhibited excellent catalytic activity for various substrates under mild reaction conditions. Moreover, MNPs‐MIC‐Pd nanomagnetic catalyst could be easily and rapidly recovered by applying an external magnet. The recovered MNPs‐MIC‐Pd nanomagnetic catalyst exhibited very good catalytic activity up to ten times in Suzuki–Miyaura and five times in Mizoroki–Heck cross‐coupling reactions without considerable loss of its catalytic activity. However, MNPs‐MIC‐Pd nanomagnetic catalyst shows notable advantages such as heterogeneous nature, efficient catalytic activity, mild reaction conditions, easy magnetic work up and recyclability.     

Enzymatic and Chemoenzymatic Three‐Step Cascades for the Synthesis of Stereochemically Complementary Trisubstituted Tetrahydroisoquinolines

Chemoenzymatic and enzymatic cascade reactions enable the synthesis of complex stereocomplementary 1,3,4‐trisubstituted tetrahydroisoquinolines (THIQs) with three chiral centers in a step‐efficient and selective manner without intermediate purification. The cascade employs inexpensive substrates (3‐hydroxybenzaldehyde and pyruvate), and involves a carboligation step, a subsequent transamination, and finally a Pictet–Spengler reaction with a carbonyl cosubstrate. Appropriate selection of the carboligase and transaminase enzymes enabled the biocatalytic formation of (1R ,2S )‐metaraminol. Subsequent cyclization catalyzed either enzymatically by a norcoclaurine synthase or chemically by phosphate resulted in opposite stereoselectivities in the products at the C1 position, thus providing access to both orientations of the THIQ C1 substituent. This highlights the importance of selecting from both chemo‐ and biocatalysts for optimal results.     

Highly Chemo‐, Regio‐, and Stereoselective Cobalt‐Catalyzed Markovnikov Hydrosilylation of Alkynes

A highly chemo‐, regio‐ and stereoselective cobalt‐catalyzed Markovnikov hydrosilylation of alkynes was developed. Various functionalized groups, such as halides, free alcohols, free aniline, ketones, esters, amides, and nitriles are tolerated, which may lead to further applications and late‐stage derivatizations. To date, this is the most efficient cobalt catalytic system (TOF=65 520 h^?1; TOF=turnover frequency) for hydrosilylation of alkynes. The Hiyama–Denmark cross‐coupling reactions of vinylsilanes with aryl iodides underwent smoothly to afford 1,1‐diarylethenes. A unique regioselectivity‐controllable hydrosilylation/hydroboration reaction of alkynes was also described.     

Preparation of multi metal–carbon nanoreactors for adsorption and catalysis

Metal–incorporated composite carbon materials have engendered great progress in the fields of catalysis, energy storage and material science because of their size and chemical and physical properties. In this study, a modern technique was applied for the development of multi metal–carbon nanoreactors (MCNRs) from a pristine carbon cage (CC) using template method with nano silica ball (NSB), pyrolysis fuel oil (PFO) and metal nanocrystals such as gold, copper, nickel, potassium and manganese. The newly prepared Au, Cu, Ni, K and Mn deposited carbon nanoreactors were fully characterized by various analytical techniques. Due to their easy fabrication protocols and broad potential applications, the MCNRs were used successfully for the chemisorptions of hydrogen and ethylene gases alongside the solvent–free heterogeneous catalytic oxidation of a secondary alcohol. The MCNRs have exhibited dynamic adsorption performance and excellent catalytic activity.