Precise Size-Selective Sieving of Nanoparticles Using a Highly Oriented Two-Dimensional Supramolecular Polymer

The development of size-selective membranes with well-defined nanopores towards the precise separation of nanometer-sized substances is a challenging task to achieve. Here a supramolecular membrane is presented that comprises a highly oriented, honeycomb-like, 2D supramolecular polymer on a polycarbonate filter support. It enables precise size-selective sieving of colloidal nanoparticles (NPs). Owing to the uniform parallel-aligned nanocavities within the 2D supramolecular polymers, the composite membrane shows a high size-selectivity with a sub-nanometer accuracy in the cutoff size of about 4.0 nm. In principle, the species of size-separable particles are unlimited, as demonstrated by quantum dots, noble metal, and metal oxide NPs. This supramolecular membrane combined with filtration advances the potential of NPs in terms of their monochromatic emission and size monodispersity, and also enables rapid removal of small magnetic NP adsorbents that are otherwise difficult to capture.     

A Surfactant‐Encapsulating Polyoxometalate Nanowire Assembly as a New Carrier for Nanoscale Noble‐Metal Catalysts

The loading of noble‐metal nanoparticles (NMNPs) onto various carriers to obtain stable and highly efficient catalysts is currently an important strategy in the development of noble metal (NM)‐based catalytic reactions and their applications. We herein report a nanowire supramolecular assembly constructed from the surfactant‐encapsulating polyoxometalates (SEPs) CTAB‐PW₁₂, which can act as new carriers for NMNPs. In this case, the Ag NPs are loaded onto the SEP nanowire assembly with a narrow size distribution from 5 to 20 nm in diameter; the average size is approximately 10 nm. The Ag NPs on the nanowire assemblies are well stabilized and the over agglomeration of Ag NPs is avoided owing to the existence of well‐arranged polyoxometalate (POM) units in the SEP assembly and the hydrophobic surfactant on the surface of the nanowire assembly. Furthermore, the loading amount of the Ag NPs can be adjusted by controlling the concentration of the AgNO₃ aqueous solution. The resultant Ag/CTAB‐PW₁₂ composite materials exhibit high activity and good stability for the catalytic reduction of 4‐nitrophenol (4‐NP) with NaBH₄ in isopropanol/H₂O solution. The NMNPs‐loaded SEP nanoassembly may represent a new composite catalyst system for application in NM‐based catalysis.     

Highly Selective and Active Pd‐In/three‐dimensional Graphene with Special Structure for Electroreduction CO2 to Formate

Electrocatalytic reduction of CO₂ to formate on carbon based electrodes is known to suffer from low electrochemical reaction activity and product selectivity. Pd/three‐dimensional graphene (Pd/3D‐RGO), In/3D‐RGO and Pd‐In/3D‐RGO for the electrochemical reduction of CO₂ were prepared by a mild method that combines chemical and hydrothermal. The metal/3D‐graphenes (metal/3D‐RGO) were characterized by scanning electron microscopy, X‐ray diffraction, transmission electron microscopy and X‐ray photoelectron spectroscopy (XPS). Cyclic voltammetry and the ion chromatography were performed to investigate the electrochemical performance of the metal/3D‐RGO. The morphology and dispersion of metal/3D‐RGO are 3D structure with amount of interconnected pores with metal NPs loading on the fold. And the Pd_0.5‐In_0.5/3D‐RGO show excellent surface performance with well dispersion and smallest particle size (12.8 nm). XPS reveal that binding energy of Pd (In) NPs is shifted to negative energy, for the metal lose electrons in metal and combine with C, which is demonstrated in the HNO₃ experiment. The peak potential of Pd_0.5‐In_0.5/3D‐RGO is −0.70 V (vs. Ag/AgCl), which is more positive than In_1.0/3D‐RGO (−0.73 V) and Pd_1.0/3D‐RGO (−1.2 V). The highest faradaic efficiency (85.3 %) happens in Pd_0.5‐In_0.5/3D‐RGO at −1.6 V vs. Ag/AgCl. In these experiments, the special structure that metal NPs combine with C and the bimetal NPs give a direction to convert CO₂ to formate.     

Design of Stable β‐Sheet‐Based Cyclic Peptide Assemblies Assisted by Metal Coordination: Selective Homo‐ and Heterodimer Formation

Metal‐directed supramolecular construction represents one of the most powerful tools to prepare a large variety of structures and functions. The ability of metals to organize different numbers and types of ligands with a variety of geometries (linear, trigonal, octahedral, etc.) expands the supramolecular synthetic architecture. We describe here the precise construction of homo‐ and heterodimeric cyclic peptide entities through coordination of a metal (Pd, Au) and to β‐sheet‐type hydrogen‐bonding interactions. The selective coordination properties of the appropriate metal allow control over the cross‐strand interaction between the two‐peptide strands.     

Porosity‐Controlled Eggshell Membrane as 3D SERS‐Active Substrate

We report on the fabrication of a surface‐enhanced Raman scattering (SERS) platform, comprised of a three‐dimensional (3D) porous eggshell membrane (ESM) scaffold decorated with Ag nanoparticles (NPs). Both native and treated ESM were used, where the treated ESM pore size and fiber crossing density was controlled by timed exposure to hydrogen peroxide (H₂O₂). Ag NPs were synthesized in situ by reduction of silver nitrate with ascorbic acid. Our results demonstrate that H₂O₂‐treated Ag‐ESM provides a more densely packed 3D network of active material, which leads to consistently higher SERS enhancement than untreated Ag‐ESM substrates.     

Size‐Selective Yolk‐Shell Nanoreactors with Nanometer‐Thin Porous Polymer Shells

Yolk‐shell nanoreactors with metal nanoparticle core and ultrathin porous polymer shells are effective catalysts for heterogeneous reactions. Polymer shells provide size‐selectivity and improved reusability of catalyst. Nanocapsules with single‐nanometer porous shells are prepared by vesicle‐templated directed assembly. Metal nanoparticles are formed either by selective initiation in pre‐fabricated nanocapsules or simultaneously with the creation of a crosslinked polymer shell. In this study, we investigated the oxidation of benzyl alcohol and benzaldehyde catalyzed by gold nanoparticles and hydrogenation of cyclohexene catalyzed by platinum nanoparticles. Comparison of newly created nanoreactors with commercially available nanoparticles revealed superior reusability and size selectivity in nanoreactors while showing no negative effect on reaction kinetics.     

Oxide‐Nanotrap‐Anchored Platinum Nanoparticles with High Activity and Sintering Resistance by Area‐Selective Atomic Layer Deposition

An area‐selective atomic layer deposition (AS‐ALD) method is described to construct oxide nanotraps to anchor Pt nanoparticles (NPs) on Al₂O₃ supports. The as‐synthesized catalysts have exhibited outstanding room‐temperature CO oxidation activity, with a significantly lowered apparent activation energy (ca. 22.17 kJ mol⁻¹) that is half that of pure Pt catalyst with the same loading. Furthermore, the structure shows excellent sintering resistance with the high catalytic activity retention up to 600 °C calcination. The key feature of the oxide nanotraps lies in its ability to anchor Pt NPs via strong metal–oxide interactions while still leaving active metal facets exposed. Our reported method for forming such oxide structure with nanotraps shows great potential for the simultaneous enhancement of thermal stability and activity of precious metal NPs.     

Delivery of Highly Active Noble‐Metal Nanoparticles into Microspherical Supports by an Aerosol‐Spray Method

Noble metal nanoparticles (NPs) with 1–5 nm diameter obtained from NaHB₄ reduction possess high catalytic activity. However, they are rarely used directly. This work presents a facile, versatile, and efficient aerosol‐spray approach to deliver noble‐metal NPs into metal oxide supports, while maintaining the size of the NPs and the ability to easily adjust the loading amount. In comparison with the conventional spray approach, the size of the loaded noble‐metal nanoparticles can be significantly decreased. An investigation of the 4‐nitrophenol hydrogenation reaction catalyzed by these materials suggests that the NPs/oxides catalysts have high activity and good endurance. For 1 % Au/CeO₂ and Pd/Al₂O₃ catalysts, the rate constants reach 2.03 and 1.46 min^?1, which is much higher than many other reports with the same noble‐metal loading scale. Besides, the thermal stability of catalysts can be significantly enhanced by modifying the supports. Therefore, this work contributes an efficient method as well as some guidance on how to produce highly active and stable supported noble‐metal catalysts.     

Region‐Selective Deposition of Core–Shell Nanoparticles for 3 D Hierarchical Assemblies by the Huisgen 1,3‐Dipolar Cycloaddition

A method for the region‐selective deposition of nanoparticles (NPs) by the Huisgen 1,3‐dipolar cycloaddition is presented. The approach enables defined stacking of various oxide NPs in any order with control over layer thickness. Thereby the reaction is performed between a substrate, functionalized with a self‐assembled monolayer of an azide‐bearing phosphonic acid (PA) and aluminum oxide (AlO_x) NPs functionalized with an alkyne bearing PA. The layer of alkyne functionalized AlO_x NPs is then used as substrate for the deposition of azide‐functionalized indium tin oxide (ITO) NPs to provide a binary stack. This progression is then conducted with alkyne‐functionalized CeO₂ NPs, yielding a ternary stack of NPs with three different NP cores. The stacks are characterized by AFM and SEM, defining the region‐selectivity of the deposition technique. Finally, these assemblies have been tested in devices as a dielectric to form a capacitor resulting in a dramatic increase in the measured capacitance.     

Metal–Organic Framework Membrane Nanopores as Biomimetic Photoresponsive Ion Channels and Photodriven Ion Pumps

Biological ion channels and ion pumps with sub‐nanometer sizes modulate ion transport in response to external stimuli. Realizing such functions with sub‐nanometer solid‐state nanopores has been an important topic with wide practical applications. Herein, we demonstrate a biomimetic photoresponsive ion channel and photodriven ion pump using a porphyrin‐based metal–organic framework membrane with pore sizes comparable to hydrated ions. We show that the molecular‐size pores enable precise and robust optoelectronic ion transport modulation in a broad range of concentrations, unparalleled with conventional solid‐state nanopores. Upon decoration with platinum nanoparticles to form a Schottky barrier photodiode, photovoltage across the membrane is generated with “uphill” ion transport from low concentration to high concentration. These results may spark applications in energy conversion, ion sieving, and artificial photosynthesis.     

Visible‐Light‐Induced Electron Transport from Small to Large Nanoparticles in Bimodal Gold Nanoparticle‐Loaded Titanium(IV) Oxide

A key to realizing the sustainable society is to develop highly active photocatalysts for selective organic synthesis effectively using sunlight as the energy source. Recently, metal‐oxide‐supported gold nanoparticles (NPs) have emerged as a new type of visible‐light photocatalysts driven by the excitation of localized surface plasmon resonance of Au NPs. Here we show that visible‐light irradiation (λ>430 nm) of TiO₂‐supported Au NPs with a bimodal size distribution (BM‐Au/TiO₂) gives rise to the long‐range (>40 nm) electron transport from about 14 small (ca. 2 nm) Au NPs to one large (ca. 9 nm) Au NP through the conduction band of TiO₂. As a result of the enhancement of charge separation, BM‐Au/TiO₂ exhibits a high level of visible‐light activity for the one‐step synthesis of azobenzenes from nitrobenzenes at 25 °C with a yield greater than 95 % and a selectivity greater than 99 %, whereas unimodal Au/TiO₂ (UM‐Au/TiO₂) is photocatalytically inactive.     

Tuning the High‐Temperature Wetting Behavior of Metals toward Ultrafine Nanoparticles

The interaction between metal nanoparticles (NPs) and their substrate plays a critical role in determining the particle morphology, distribution, and properties. The pronounced impact of a thin oxide coating on the dispersion of metal NPs on a carbon substrate is presented. Al₂O₃‐supported Pt NPs are compared to the direct synthesis of Pt NPs on bare carbon surfaces. Pt NPs with an average size of about 2 nm and a size distribution ranging between 0.5 nm and 4.0 nm are synthesized on the Al₂O₃ coated carbon nanofiber, a significant improvement compared to those directly synthesized on a bare carbon surface. First‐principles modeling verifies the stronger adsorption of Pt clusters on Al₂O₃ than on carbon, which attributes the formation of ultrafine Pt NPs. This strategy paves the way towards the rational design of NPs with enhanced dispersion and controlled particle size, which are promising in energy storage and electrocatalysis.     

Single Crystal‐to‐Single Crystal Site‐Selective Postsynthetic Metal Exchange in a Zn–MOF Based on Semi‐Rigid Tricarboxylic Acid and Access to Bimetallic MOFs

The metal ions in a neutral Zn–MOF constructed from tritopic triacid H₃L with inherent concave features, rigid core, and peripheral flexibility are found to exist in two distinct SBUs, that is, 0D and 1D. This has allowed site‐selective postsynthetic metal exchange (PSME) to be investigated and reactivities of the metal ions in two different environments in coordination polymers to be contrasted for the first time. Site‐selective transmetalation of Zn ions in the discrete environment is shown to occur in a single crystal‐to‐single crystal (SCSC) fashion, with metal ions such as Fe³⁺, Ru³⁺, Cu²⁺, Co²⁺, etc., whereas those that are part of 1D SBU sustain structural integrity, leading to novel bimetallic MOFs, which are inaccessible by conventional approaches. To the best of our knowledge, site‐selective postsynthetic exchange of an intraframework metal ion in a MOF that contains metal ions in discrete as well as polymeric SBUs is heretofore unprecedented.     

Preparation of few‐layer two‐dimensional polymers by self‐assembly of bola‐amphiphilic small molecules

Two bola‐amphiphilic small molecules, based on the diphenylanthracene skeleton structure, namely, BASM‐1 and its functionalized small molecule BASM‐2 , were designed and synthesized. The self‐assembly behavior and mechanism of these two molecules in aqueous solution were studied. The supramolecular two‐dimensional (2D) layer and the covalent 2D polymers were, respectively, prepared by these two molecules. What is more, the transverse size of the covalent 2D polymer laminates increased with the extension of the polymerization time. Atomic force microscopy results showed that both free‐standing single‐layer 2D polymers and few layer laminates with two to three molecular layers were obtained. So our work provides a simple and efficient method for directly preparing independent both supramolecular 2D polymers and covalent 2D polymers in liquid phase which is of great significance. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1748–1755     

Combining Electrodeposition and Optical Microscopy for Probing Size‐Dependent Single‐Nanoparticle Electrochemistry

Electrodeposition of nanoparticles (NPs) is a promising route for the preparation of highly electroactive nanostructured electrodes. By taking advantage of progressive electrodeposition, disordered arrays with a wide size distribution of Ag NPs are produced. Combined with surface‐reaction monitoring by using highly sensitive backside absorbing‐layer optical microscopy (BALM), such arrays offer a platform for screening size‐dependent electrochemistry at the single NP level. In particular, this strategy allows rationalizing the electrodeposition dynamics at the single‐NP level (>10 nm), up to the point of quantifying the presence of metal nanoclusters (<2 nm), and probing easier NP oxidation with size decrease, either through electrochemical or galvanic reactions.     

Two‐Dimensional Membranes: New Paradigms for High‐Performance Separation Membranes

Two‐dimensional (2D) materials with atomic thicknesses have aroused great interest as promising building blocks for the preparation of ultrathin 2D membranes. These 2D membranes can exhibit unprecedentedly high separation permeance owing to their ultrasmall membrane thicknesses and superior selectivity because of their size‐selective nanopores and/or nanochannels. Until now, a large number of 2D membranes with good performance have been reported, highlighting the potential of these novel membranes for efficient liquid and gas separations. Summarized in this review are the latest advances in 2D membranes, with a special focus on industrially attractive separation processes, fabrication methods of laminar membranes, choices of membrane materials, designs of membrane structures, and unique membrane transport properties. Opportunities and challenges of 2D membranes for commercial applications are also briefly discussed.     

Strong,Self‐Healable,and Recyclable Visible‐Light‐Responsive Hydrogel Actuators

The most pressing challenges for light‐driven hydrogel actuators include reliance on UV light, slow response, poor mechanical properties, and limited functionalities. Now, a supramolecular design strategy is used to address these issues. Key is the use of a benzylimine‐functionalized anthracene group, which red‐shifts the absorption into the visible region and also stabilizes the supramolecular network through π–π interactions. Acid–ether hydrogen bonds are incorporated for energy dissipation under mechanical deformation and maintaining hydrophilicity of the network. This double‐crosslinked supramolecular hydrogel developed via a simple synthesis exhibits a unique combination of high strength, rapid self‐healing, and fast visible‐light‐driven shape morphing both in the wet and dry state. As all of the interactions are dynamic, the design enables the structures to be recycled and reprogrammed into different 3D objects.     

Ion‐Pair‐Based Assemblies Comprising Pyrrole–Pyrazole Hybrids

Modified 3,5‐dipyrrolylpyrazole (DPP) derivatives in their protonated form produce planar [2+2]‐type complexes with trifluoroacetate (TFA) ions. These complexes serve as constituent components of ion‐pair‐based assemblies. An essential strategy for the construction of dimension‐controlled organized structures based on these [2+2]‐type complexes is the introduction of aryl rings bearing long alkyl chains, which enables the formation of 2D patterns at interfaces, supramolecular gels, and mesophases.     

Development of Poor Cell Adhesive Immersion Precipitation Membranes Based on Supramolecular Bis‐Urea Polymers

A variety of biomedical applications requires tailored membranes; fabrication through a mix‐and‐match approach is simple and desired. Polymers based on supramolecular bis‐urea (BU) moieties are capable of modular integration through directed non‐covalent stacking. Here, it is proposed that non‐cell adhesive properties can be introduced in polycaprolactone‐BU‐based membranes by the addition of poly(ethylene glycol) (PEG)‐BU during immersion precipitation membrane fabrication, while unmodified PEG is not retained in the membrane. PEG‐BU addition results in denser membranes with a similar pore size compared to pristine membranes, while PEG addition induces defect formation. Infrared spectroscopy and surface hydrophobicity measurements indicate that PEG‐BU is retained during membrane processing. Additionally, PEG‐BU incorporation successfully leads to poor cell adhesive surfaces. No evidence is observed to indicate PEG retention. The results obtained indicate that the BU system enables intimate mixing of BU‐modified polymers after processing. Collectively, the results provide the first steps toward BU‐based immersion precipitated supramolecular membranes for biomedical applications.     

A Double Cation–π‐Driven Strategy Enabling Two‐Dimensional Supramolecular Polymers as Efficient Catalyst Carriers

The cation–π interaction is a strong non‐covalent interaction that can be used to prepare high‐strength, stable supramolecular materials. However, because the molecular plane of a cation‐containing group and that of aromatic structure are usually perpendicular when forming a cation–π complex, it is difficult to exploit the cation–π interaction to prepare a 2D self‐assembly in which the molecular plane of all the building blocks are parallel. Herein, a double cation–π‐driven strategy is proposed to overcome this difficulty and have prepared 2D self‐assemblies with long‐range ordered molecular hollow hexagons. The double cation–π interaction makes the 2D self‐assemblies stable. The 2D self‐assemblies are to be an effective carrier that can eliminate metal‐nanoparticle aggregation. Such 2D assembly/palladium nanoparticle hybrids are shown to exhibit recyclability and superior catalytic activity for a model reaction.