Early Transition Metal Catalysis for Olefin–Polar Monomer Copolymerization

Introducing polar functional groups into widely used polyolefins can enhance polymer surface, rheological, mixing, and other properties, potentially upgrading polyolefins for advanced, value-added applications. The metal catalyst-mediated copolymerization of non-polar olefins with polar comonomers represents the seemingly most straightforward, atom- and energy-efficient approach for synthesizing polar functionalized polyolefins. However, electrophilic early transition metal (groups 3 and 4)-catalyzed processes which have achieved remarkable success in conventional olefin polymerizations, encounter severe limitations here, largely associated with the Lewis basicity of the polar co-monomers. In recent years, however, new catalytic systems have been developed and successful strategies have emerged. In this Minireview, we summarize the recent progress in early transition metal polymerization catalyst development, categorized by the catalytic metal complex and polar comonomer identity. Furthermore, we discuss advances in the mechanistic understanding of these polymerizations, focusing on critical challenges and strategies that mitigate them.     

Asymmetric Cationic [P,O] Type Palladium Complexes in Olefin Homopolymerization and Copolymerization

Metal‐catalyzed ethylene homopolymerization and ethylene‐polar monomer copolymerization to produce new kinds of polyolefins with novel microstructures are of great interest. So far, there are some disadvantages for traditional transition metal catalyst systems. Therefore, it is critical to develop new catalysts or alternative strategies. In recent years, some cationic [P, O] palladium complexes have been demonstrated with the abilities to obtain oligomers and the high molecular weight polymers. Most importantly, these complexes showed high activity and generated polymers with specific microstructures when used for copolymerization of ethylene with industrially relevant polar monomers. This review summarizes several types of high performance cationic [P, O] palladium catalysts in ethylene oligomerization, ethylene homopolymerization and the copolymerization of ethylene with polar monomers. Specially, the regulation of steric and electronic effects at specific sites of the metal complexes was focused.     

Direct Synthesis of Functionalized High‐Molecular‐Weight Polyethylene by Copolymerization of Ethylene with Polar Monomers

The introduction of even a small amount of polar functional groups into polyolefins could excise great control over important material properties. As the most direct and economic strategy, the transition‐metal‐catalyzed copolymerization of olefins with polar, functionalized monomers represents one of the biggest challenges in this field. The presence of polar monomers usually dramatically reduces the catalytic activity and copolymer molecular weight (to the level of thousands or even hundreds Da), rendering the copolymerization process and the copolymer materials far from ideal for industrial applications. In this contribution, we demonstrate that these obstacles can be addressed through rational catalyst design. Copolymers with highly linear microstructures, high melting temperatures, and very high molecular weights (close to or above 1 000 000 Da) were generated. The direct synthesis of polar functionalized high‐molecular‐weight polyethylene was thus achieved.     

Recent Advances in Transition Metal-Based Catalysts for Ethylene Copolymerization with Polar Comonomer

The synthesis of polar functionalized polyolefin (PFP) offers improvement in mixing properties, polymer surface, and rheological properties with the potential of upgraded polyolefins for modern and ingenious applications. The synthesis of PFP from metal-based catalyzed olefin (non-polar in nature) copolymerization with polar comonomers embodies energy-efficient, atom-efficient, and apparently an upfront methodology. Despite their outstanding success during conventional polymerization of olefin, 3^rd and 4^th group (early transition metal)-based catalysts, owing to their electrophilic nature, face challenges mainly due to Lewis basic sites of the polar monomers. On the contrary, late transition metal-based catalysts have also made progress, in recent years, for PFP synthesis. The recent past has also witnessed several advancements in the development of dominating palladium-based catalysts while their lower resistance towards ligand functional groups has limited the practical application of abundant and cheaper nickel-based catalysts. However, the relentless efforts of the scientific community, during the past half-decade, have indicated rigorous progress in the development of nickel-based catalysts for PFP synthesis. In this review, we have abridged the recent research trends in both early as well as late transition metal-based catalyst development. Furthermore, we have highlighted the role of transition metal-based catalysts in influencing the polymer properties.     

稀土催化极性单体配位均聚及与非极性单体共聚合的研究

将极性基团引入大分子链中可改善非极性聚烯烃材料的表面性能,扩展其应用范围甚至带来不可预见的新功能,是市场需求并由企业驱动.与聚合后功能化改性和物理共混方法相比,极性与非极性单体配位共聚合是最直接和简便的方法,适用范围广,并可保持聚烯烃的立构规整度,一直以来,相关研究备受企业和科研工作者瞩目.然而,极性基团通常具有Lewis碱性,容易与Lewis酸性的聚合催化剂强烈螯合而致其毒化,因此,这又是极具挑战性的课题.目前,该领域的研究取得了很大的进展,已经实现了乙烯与很多极性单体的共聚合.今后,将集中解决如何实现极性单体均聚合,提高共聚合活性,特别是极性单体插入率和分布可调节性,保持立体选择性,以及获得高分子量、具有实际应用意义的共聚产物等问题.本文旨在将课题组近年来在极性功能化苯乙烯和共轭双烯烃单体的均聚合及与苯乙烯、乙烯和共轭双烯烃等非极性单体共聚合方面的最新研究成果以及国内外该领域的相关报道进行综合阐述,为读者提供解决上述关键问题采用的研究路线、实施方法和创新性思维.     

Emerging Palladium and Nickel Catalysts for Copolymerization of Olefins with Polar Monomers

Transition‐metal‐catalyzed copolymerization of olefins with polar monomers represents a challenge because of the large variety of substrate‐induced side reactions. However, this approach also holds the potential for the direct synthesis of polar functionalized polyolefins with unique properties. After decades of research, only a few catalyst systems have been found to be suitable for this reaction. Some major advances in catalyst development have been made in the past five years. This Minireview summarizes some of the recent progress in the extensively studied Brookhart and Drent catalyst systems, as well as emerging alternative palladium and nickel catalysts.     

Direct and Tandem Routes for the Copolymerization of Ethylene with Polar Functionalized Internal Olefins

Transition metal catalyzed ethylene copolymerization with polar monomers is a highly challenging reaction. After decades of research, the scope of suitable comonomer substrates has expanded from special to fundamental polar monomers and, recently, to 1,1‐disubstituted ethylenes. Described in this contribution is a direct and tandem strategy to realize ethylene copolymerization with various 1,2‐disubstituted ethylenes. The direct route is sensitive to sterics of both the comonomers and the catalyst. In the tandem route, ruthenium‐catalyzed ethenolysis can convert 1,2‐disubstituted ethylenes into terminal olefins, which can be subsequently copolymerized with ethylene to afford polar functionalized polyolefins. The one‐pot, two‐step tandem route is highly versatile and efficient in dealing with challenging substrates. This work is a step forward in terms of expanding the substrate scope for transition metal catalyzed ethylene copolymerization with polar‐functionalized comonomers.     

Aqueous Catalytic Polymerization of Olefins

Catalytic conversions in aqueous environments by transition metal complexes have become a well‐established field over the past two decades. However, the vast majority of investigations have focussed on small‐molecule synthesis. This may appear somewhat surprising as water is a particularly attractive reaction medium, especially for polymerization reactions. For example, aqueous emulsion and suspension polymerization is carried out today on a large scale by noncatalytic free‐radical routes. Polymer latices can be obtained as a product, that is, stable aqueous dispersions of polymer particles in the size range of 50 to 1000 nm. Such latices possess a unique property profile. Amongst other advantages, the use of water as a dispersing medium is particularly environmentally friendly. In comparison to these free‐radical reactions, aqueous catalytic polymerizations of olefinic monomers have received less attention. However, considerable advances and an increased awareness of this field have emerged during the past few years. A variety of high molecular weight polymers ranging from amorphous or semicrystalline polyolefins to polar‐substituted hydrophilic materials have now been prepared by catalytic polymerization of olefinic monomers in water. Polymer latices based on a number of readily available monomers are accessible and catalytic activities as high as 10⁵ turnovers per hour have already been reported. As another example, materials prepared by aqueous catalytic polymerization have been investigated as protein inhibitors. A versatile field spanning colloids, polymer, and coordination chemistry has emerged.     

Regioselective C−H Xanthylation as a Platform for Polyolefin Functionalization

Polyolefins that contain polar functional groups are important materials for next‐generation lightweight engineering thermoplastics. Post‐polymerization modification is an ideal method for the incorporation of polar groups into branched polyolefins; however, it typically results in chain scission events, which have deleterious effects on polymer properties. Herein, we report a metal‐free method for radical‐mediated C?H xanthylation that results in the regioselective functionalization of branched polyolefins without coincident polymer‐chain scission. This method enables a tunable degree of polymer functionalization and capitalizes on the versatility of the xanthate functional group to unlock a wide variety of C?H transformations previously inaccessible on branched polyolefins.     

Polymerization of Substituted Acetylenes Carrying Non‐Polar and Polar Groups with Transition Metal Acetylide Catalysts

A new series of single‐component air‐stable transition metal acetylide catalysts for the polymerization of substituted acetylenes carrying non‐polar and polar groups was developed. The catalytic properties of transition metal acetylides are related to transition metals, phosphines and acetylenic ligands. Nickel acetylides show higher catalytic activity towards the polymerization of substituted acetylenes containing non‐polar groups, while palladium acetylides show higher catalytic activity towards the polymerization of substituted acetylenes carrying polar groups. Palladium acetylides with PPh₃ ligand are efficient catalysts for the polymerization of substituted acetylenes bearing both non‐polar and polar groups.     

Influence of Polyethylene Glycol Unit on Palladium‐ and Nickel‐Catalyzed Ethylene Polymerization and Copolymerization

The transition‐metal‐catalyzed copolymerization of olefins with polar functionalized co‐monomers represents a major challenge in the field of olefin polymerization. It is extremely difficult to simultaneously achieve improvements in catalytic activity, polar monomer incorporation, and copolymer molecular weight through ligand modifications. Herein we introduce a polyethylene glycol unit to some phosphine‐sulfonate palladium and nickel catalysts, and its influence on ethylene polymerization and copolymerization is investigated. In ethylene polymerization, this strategy leads to enhanced activity, catalyst stability, and increased polyethylene molecular weight. In ethylene copolymerization with polar monomers, improvements in all copolymerization parameters are realized. This effect is most significant for polar monomers with hydrogen‐bond‐donating abilities.     

Catalytic regioselective introduction of allyl alcohol into the nonpolar polyolefins: development of one-pot synthesis of hydroxyl-capped polyolefins mediated by a new metallocene IF catalyst

A new catalytic regioselective one-pot synthesis of hydroxyl-capped polyolefins is reported. This synthesis employs a new stereorigid bridged metallocene having an indenyl and a fluorenyl ligand named IF catalyst 1, exhibiting high catalytic performances. Here, we report on (1) the first example of allyl alcohol incorporation into the nonpolar polymer backbone using IF catalyst 1 and methylaluminoxane with high activity, high molecular weight, and high polar monomer uptake at high temperature, and (2) the first example of predominant end-site-selective introduction of an alcohol group into the polyolefins. Moreover, we observed the mixed regioselectivity by the type of alkylaluminum.     

Catalytic Cleavage of Amide C−N Bond: Scandium,Manganese, and Zinc Catalysts for Esterification of Amides

Amide C?N bonds are thermodynamically stable and their fission, such as by hydrolysis and alcoholysis, is considered a long‐challenging organic reaction. In general, stoichiometric chemical transformations of amides into the corresponding esters and acids require harsh conditions, such as strong acids/bases at a high reaction temperature. Accordingly, the development of catalytic reactions that cleave not only primary and secondary amides, but also tertiary amides in mild conditions, is in high demand. Herein, we surveyed typical stoichiometric transformations of amides, and highlight our recent achievements in the catalytic esterification of amides using scandium, manganese, and zinc catalysts, together with some recent catalyst systems using late‐transition metal reported by other groups.     

Transition‐metal‐catalyzed Chelation‐assisted C–H Functionalization of Aromatic Substrates

In the past decade, transition‐metal‐catalyzed C–H activations have been very popular in the research field of organometallic chemistry, and have been considered as efficient and convenient strategies to afford complex natural products, functional advanced materials, fluorescent compounds, and pharmaceutical compounds. In this account, we begin with a brief introduction to the development of transition‐metal‐catalyzed C–H activation, especially the development of transition‐metal‐catalyzed chelation‐assisted C–H activation. Then, a more detailed discussion is directed towards our recent studies on the transition‐metal‐catalyzed chelation‐assisted oxidative C–H/C–H functionalization of aromatic substrates bearing directing functional groups.     

Surface‐Passivated SBA‐15‐Supported Gold Nanoparticles: Highly Improved Catalytic Activity and Selectivity toward Hydrophobic Substrates

Silanol groups on a silica surface affect the activity of immobilized catalysts because they can influence the hydrophilicity/hydrophobicity, matter transfer, or even transition state in a catalytic reaction. Previously, these silanol groups have usually been passivated by using surface‐passivation reagents, such as alkoxysilanes, bis‐silylamine reagents, chlorosilanes, etc., and surface passivation has typically been found in mesoporous‐silicas‐supported molecular catalysts and heteroatomic catalysts. However, this property has rarely been reported in mesoporous‐silicas‐supported metal‐nanoparticle catalysts. Herein, we prepared an almost‐superhydrophobic SBA‐15‐supported gold‐nanoparticle catalyst by using surface passivation, in which the catalytic activity increased more than 14 times for the reduction of nitrobenzene compared with non‐passivated SBA‐15. In addition, this catalyst can selectively catalyze hydrophobic molecules under our experimental conditions, owing to its high (almost superhydrophobic) hydrophobic properties.     

Significant Polar Comonomer Enchainment in Zirconium‐Catalyzed,Masking Reagent‐Free,Ethylene Copolymerizations

In principal, the direct copolymerization of ethylene with polar comonomers should be the most efficient means to introduce functional groups into conventional polyolefins but remains a formidable challenge. Despite the tremendous advances in group 4‐centered catalysis for olefin polymerization, successful examples of ethylene + polar monomer copolymerization are rare, especially without Lewis acidic masking reagents. Here we report that certain group 4 catalysts are very effective for ethylene + CH₂=CH(CH₂)_nNR₂ copolymerizations with activities up to 3400 Kg copolymer mol^?1‐Zr h^‐1 atm^‐1, and with comonomer enchainment up to 5.5 mol % in the absence of masking reagents. Group 4 catalyst‐amino‐olefin structure–activity‐selectivity relationships reflect the preference of olefin activation over free amine coordination, which is supported by mechanistic experiments and DFT analysis. These results illuminate poorly understood facets of d⁰ metal‐catalyzed polar olefin monomer copolymerization processes.     

Significant Polar Comonomer Enchainment in Zirconium‐Catalyzed,Masking Reagent‐Free,Ethylene Copolymerizations

In principal, the direct copolymerization of ethylene with polar comonomers should be the most efficient means to introduce functional groups into conventional polyolefins but remains a formidable challenge. Despite the tremendous advances in group 4‐centered catalysis for olefin polymerization, successful examples of ethylene + polar monomer copolymerization are rare, especially without Lewis acidic masking reagents. Here we report that certain group 4 catalysts are very effective for ethylene + CH₂=CH(CH₂)_nNR₂ copolymerizations with activities up to 3400 Kg copolymer mol^?1‐Zr h^‐1 atm^‐1, and with comonomer enchainment up to 5.5 mol % in the absence of masking reagents. Group 4 catalyst‐amino‐olefin structure–activity‐selectivity relationships reflect the preference of olefin activation over free amine coordination, which is supported by mechanistic experiments and DFT analysis. These results illuminate poorly understood facets of d⁰ metal‐catalyzed polar olefin monomer copolymerization processes.     

Olefins and Vinyl Polar Monomers: Bridging the Gap for Next Generation Materials

The inherent differences in reactivity between activated and non‐activated alkenes prevents copolymerization using established polymer synthesis techniques. Research over the past 20 years has greatly advanced the copolymerization of polar vinyl monomers and olefins. This Review highlights the challenges associated with conventional polymerization systems and evaluates the most relevant methods which have been developed to “bridge the gap” between polar vinyl monomers and olefins. We discuss advancements in heteroatom tolerant coordination–insertion polymerizations, methods of controlling radical polymerizations to incorporate olefinic monomers, as well as combined approaches employing sequential polymerizations. Finally, we discuss state‐of‐the‐art stimuli‐responsive systems capable of facile switching between catalytic pathways and provide an outlook towards applications in which tailored copolymers are ideally suited.     

An Update on Formic Acid Dehydrogenation by Homogeneous Catalysis

Formic acid (FA) has been extensively studied as one of the most promising hydrogen energy carriers today. The catalytic decarboxylation of FA ideally leads to the formation of CO₂ and H₂ that can be applied in fuel cells. A large number of transition‐metal based homogeneous catalysts with high activity and selectivity have been reported for the selective FA dehydrogentaion. In this review, we discussed the recent development of C,N/N,N‐ligand and pincer ligand‐based homogeneous catalysts for the FA dehydrogenation reaction. Some representative catalysts are further evaluated by the CON/COF assessment (catalyst on‐cost number)/(catalyst on‐cost frequency). Conclusive remarks are provided with future challenges and opportunities.     

Activation of Carboxylic Acids in Asymmetric Organocatalysis

Organocatalysis, catalysis using small organic molecules, has recently evolved into a general approach for asymmetric synthesis, complementing both metal catalysis and biocatalysis. 1 Its success relies to a large extent upon the introduction of novel and generic activation modes. 2 Remarkably though, while carboxylic acids have been used as catalyst directing groups in supramolecular transition‐metal catalysis, 3 a general and well‐defined activation mode for this useful and abundant substance class is still lacking. Herein we propose the heterodimeric association of carboxylic acids with chiral phosphoric acid catalysts as a new activation principle for organocatalysis. This self‐assembly increases both the acidity of the phosphoric acid catalyst and the reactivity of the carboxylic acid. To illustrate this principle, we apply our concept in a general and highly enantioselective catalytic aziridine‐opening reaction with carboxylic acids as nucleophiles.