DNA Binding and Oxidative Cleavage by a Water-soluble Carboxyl Manganese（Ⅲ） Corrole

The interaction of calf thymus DNA （CT DNA） and water-soluble manganese corrole, 5,10,15-tris（4-carboxyphenyl）corrolatomanganese（Ⅲ） （MnuTCPC） has been studied by absorption spectra, fluorescence spectra and CD spectra, as well as by viscosity measurements. Results revealed that this manganese corrole binds to CT DNA via an outside groove binding mode with intrinsic binding constant Ku of 4.67 × 104 Lomol L DNA cleavage activities of MnmTCPC in the presence of various oxidants were also investigated, MnmTCPC can cleave the supercoiled plas- mid pBR322 DNA to both nicked and linear form in the presence of hydrogen peroxide or tert-BuOOH, while no nuclease activity was observed by using KHSO5 as oxidant. Inhibitor tests revealed that hydroxyl radicals or singlet oxygen was not involved in MnTCPC mediated DNA oxidative cleavage. It is suggested that （oxo）manganese（V） corrole is the possibly active intermediate in this oxidative cleavage reactions.     

Mechanistic disparity in the electron transfer reactions of thiosulfate with di‐μ‐oxo‐bis(1,4,8,11‐tetraazacyclotetradecane)‐dimanganese(III,IV) and di‐μ‐oxo‐bis(1,4,7,10‐tetraazacyclododecane)‐dimanganese(III,IV) complexes

A comparative kinetic study of the reactions of two mixed valence manganese(III,IV) complexes of macrocyclic ligands, [L¹Mn^IV(O)₂Mn^IIIL¹], 1 (L¹ = 1,4,8,11‐tetraazacyclotetradecane) and [L²Mn^IV(O)₂Mn^IIIL²], 2 (L² = 1,4,7,10‐tetraazacyclododecane) with thiosulfate has been carried out by spectrophotometry in aqueous buffer at 30°C. Reaction between complex 1 and thiosulfate follows a first‐order rate saturation kinetics. The pH dependency and kinetic evidences suggest the participation of two complex species of Mn^III(μ‐O)₂Mn^IV under the experimental conditions. Detailed kinetic study shows that reduction of 2 proceeds through an autocatalytic path where the intermediate (Mn^III)₂ species has been assumed to catalyze the reaction. The difference in the reaction mechanisms is ascribed to the difference in stability of the intermediate complex species, the evidence for which comes from the electrochemical behavior of the complexes and time dependent EPR spectroscopic measurements during the reduction of 2 . © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 36: 119–128, 2004     

Electrochemistry and Spectroscopy of Sulfate Complexes of (Tetraphenylporphyrinato)manganese

The electrochemical and spectroscopic properties of [Mn₂(tpp)₂(SO₄)] (H₂tpp=tetraphenylporphyrin=5,10,15,20‐tetraphenyl‐21H,23H‐porphine) were studied to characterize the stability of this compound as a function of solvent, redox state, and sulfate concentration. In non‐coordinating solvents such as 1,2‐dichloroethane, the dimer was stable, and two cyclic voltammetric waves were observed in the region for Mn^III reduction. These waves correspond to reduction of the dimer to [Mn^II(tpp)] and [Mn^III(tpp)(OSO₃)]^?, and reduction of [Mn^III(tpp)(OSO₃)]^? to [Mn^II(tpp)(OSO₃)]^2?, respectively. In the coordinating solvent DMSO, [Mn₂(tpp)₂(SO₄)] was unstable and dissociated to form [Mn^III(tpp)(DMSO)₂]⁺. A single voltammetric wave was observed for Mn^III reduction in this solvent, corresponding to formation of [Mn^II(tpp)(DMSO)]. In non‐coordinating solvent systems, addition of sulfate (as the bis(triphenylphosphoranylidene)ammonium (PPN⁺) salt) resulted in dimer dissociation, yielding [Mn^III(tpp)(OSO₃)]^?. Reduction of this monomer produced [Mn^II(tpp)(OSO₃)]^2?. In DMSO, addition of SO led to displacement of solvent molecules forming [Mn^III(tpp)(OSO₃)]^?. Reduction of this species in DMSO led to [Mn^II(tpp)(DMSO)].     

Mechanistic studies on the oxidation of glyoxylic and pyruvic acids by a {Mn3O4}4+ core in aqueous media

In aqueous media, the Mn^IV trimer [Mn^IV₃(μ‐O)₄(phen)₄(H₂O)₂]⁴⁺ ( 1 , phen = 1,10‐phenanthroline) equilibrates with its deprotonated from [Mn₃(μ‐O)₄(phen)₄(H₂O)(OH)]³⁺ ( 2 ). Among the several synthetic multinuclear oxo‐ and/or carboxylato‐bridged manganese complexes known to date containing metal‐bound water, to the best of our knowledge, 1 is one of the rare examples that deprotonates ( 1 ? 2 + H⁺; pK_a = 4.00 (±0.15) at 25.0°C, I = 1.0 mol dm^?3, maintained with NaNO₃) at physiological pH. In aqueous media (pH 2–4), 1 oxidizes both glyoxylic and pyruvic acids to formic and acetic acid, respectively, along with the formation of CO₂, the end manganese state being Mn^II. Kinetic studies suggest that the species 1 , its deprotonated form 2 , the reducing acids (HA), and their conjugate bases (A^?) all take part in the reaction. The oxidant 1 is found to be more reactive than its conjugate base 2 , and HA reacts faster than A^? in reducing 1 or 2 . The gem‐diol form of the α‐oxo acids (especially for glyoxylic acid) is the possible reducing species. The Mn^IV₃ to Mn^II transition in the present observation proceeds through the intermediate generation of the spectrally characterized mixed‐valent Mn^IIIMn^IV dimer that quickly collapses to Mn^II. The observed rates of glyoxylic or pyruvic acid oxidation do not depend on the variation of 1,10‐phenanthroline content of the solution, indicating the absence of any phen‐releasing preequilibrium of the title complex in solution. The reactions rates were found to be lowered in media enriched with D₂O in comparison to that in H₂O and a rate‐limiting one electron one proton (1e, 1H⁺) electroprotic mechanism is proposed. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 323–335, 2010     

Pulsed‐EPR Evidence of a Manganese(II) Hydroxycarbonyl Intermediate in the Electrocatalytic Reduction of Carbon Dioxide by a Manganese Bipyridyl Derivative

A key intermediate in the electroconversion of carbon dioxide to carbon monoxide, catalyzed by a manganese tris(carbonyl) complex, is characterized. Different catalytic pathways and their potential reaction mechanisms are investigated using a large range of experimental and computational techniques. Sophisticated spectroscopic methods including UV/Vis absorption and pulsed‐EPR techniques (2P‐ESEEM and HYSCORE) were combined together with DFT calculations to successfully identify a key intermediate in the catalytic cycle of CO₂ reduction. The results directly show the formation of a metal–carboxylic acid–CO₂ adduct after oxidative addition of CO₂ and H⁺ to a Mn⁰ carbonyl dimer, an unexpected intermediate.     

Photochemical Reduction of Carbon Dioxide Catalyzed by a Ruthenium‐Substituted Polyoxometalate

A polyoxometalate of the Keggin structure substituted with Ru^III, ⁶Q₅[Ru^III(H₂O)SiW₁₁O₃₉] in which ⁶Q=(C₆H₁₃)₄N⁺, catalyzed the photoreduction of CO₂ to CO with tertiary amines, preferentially Et₃N, as reducing agents. A study of the coordination of CO₂ to ⁶Q₅[Ru^III(H₂O)SiW₁₁O₃₉] showed that 1) upon addition of CO₂ the UV/Vis spectrum changed, 2) a rhombic signal was obtained in the EPR spectrum (g_x=2.146, g_y=2.100, and g_z=1.935), and 3) the ¹³C NMR spectrum had a broadened peak of bound CO₂ at 105.78 ppm (Δ_1/2=122 Hz). It was concluded that CO₂ coordinates to the Ru^III active site in both the presence and absence of Et₃N to yield ⁶Q₅[Ru^III(CO₂)SiW₁₁O₃₉]. Electrochemical measurements showed the reduction of Ru^III to Ru^II in ⁶Q₅[Ru^III(CO₂)SiW₁₁O₃₉] at ?0.31 V versus SCE, but no such reduction was observed for ⁶Q₅[Ru^III(H₂O)SiW₁₁O₃₉]. DFT‐calculated geometries optimized at the M06/PC1//PBE/AUG‐PC1//PBE/PC1‐DF level of theory showed that CO₂ is preferably coordinated in a side‐on manner to Ru^III in the polyoxometalate through formation of a Ru? O bond, further stabilized by the interaction of the electrophilic carbon atom of CO₂ to an oxygen atom of the polyoxometalate. The end‐on CO₂ bonding to Ru^III is energetically less favorable but CO₂ is considerably bent, thus favoring nucleophilic attack at the carbon atom and thereby stabilizing the carbon sp² hybridization state. Formation of a O₂C–NMe₃ zwitterion, in turn, causes bending of CO₂ and enhances the carbon sp² hybridization. The synergetic effect of these two interactions stabilizes both Ru–O and C–N interactions and probably determines the promotional effect of an amine on the activation of CO₂ by [Ru^III(H₂O)SiW₁₁O₃₉]^5?. Electronic structure analysis showed that the polyoxometalate takes part in the activation of both CO₂ and Et₃N. A mechanistic pathway for photoreduction of CO₂ is suggested based on the experimental and computed results.     

Electronic Structure of Copper Corroles

The ground state electronic structure of copper corroles has been a topic of debate and revision since the advent of corrole chemistry. Computational studies formulate neutral Cu corroles with an antiferromagnetically coupled Cu^II corrole radical cation ground state. X‐ray photoelectron spectroscopy, EPR, and magnetometry support this assignment. For comparison, Cu^II isocorrole and [TBA][Cu(CF₃)₄] were studied as authentic Cu^II and Cu^III samples, respectively. In addition, the one‐electron reduction and one‐electron oxidation processes are both ligand‐based, demonstrating that the Cu^II centre is retained in these derivatives. These observations underscore ligand non‐innocence in copper corrole complexes.     

Kinetics and mechanism of oxidation of 2‐mercaptosuccinic acid by bis(μ‐oxo)‐ manganese(III,IV)‐cyclam complex in aqueous medium: Influence of externally added copper(II)

Kinetic studies on the oxidation of 2‐mercaptosuccinic acid by dinuclear [Mn₂^III/IV(μ‐O)₂(cyclam)₂](ClO₄)₃] ( 1 ) (abbreviated as Mn^III–Mn^IV) (cyclam = 1,4,8,11‐tetraaza‐cyclotetradecane) have been carried out in aqueous medium in the pH range of 4.0–6.0, in the presence of acetate buffer at 30°C by UV–vis spectrophotometry. In the pH region, two species of complex 1 (Mn^III–Mn^IV and Mn^III–Mn^IVH, the later being μ‐O protonated form) were found to be kinetically significant. The first‐order dependence of the rate of the reactions on [Thiol] both in presence and absence of externally added copper(II) ions, first‐order dependence on [Cu²⁺] and a decrease of rate of the reactions with increase in pH have been rationalized by suitable sequence of reactions. Protonation of μ‐O bridge of 1 is evidenced by the perchloric acid catalyzed decomposition of 1 to mononuclear Mn(III) and Mn(IV) complex observed by UV–vis and EPR spectroscopy. The kinetic features have been rationalized considering Cu(RSH) as the reactive intermediate. EPR spectroscopy lends support for this. The formation of a hydrogen bonded outer‐sphere adduct between the reductant and the complex in the lower pH range prior to electron transfer reactions is most likely to occur. © 2004 Wiley Periodicals, Inc. Int J Chem Kinet 36: 170–177 2004     

Selective Photoelectrochemical Reduction of Aqueous CO2 to CO by Solvated Electrons

Reduction of CO₂ by direct one‐electron activation is extraordinarily difficult because of the ?1.9 V reduction potential of CO₂. Demonstrated herein is reduction of aqueous CO₂ to CO with greater than 90 % product selectivity by direct one‐electron reduction to CO₂^.? by solvated electrons. Illumination of inexpensive diamond substrates with UV light leads to the emission of electrons directly into water, where they form solvated electrons and induce reduction of CO₂ to CO₂^.?. Studies using diamond were supported by studies using aqueous iodide ion (I^?), a chemical source of solvated electrons. Both sources produced CO with high selectivity and minimal formation of H₂. The ability to initiate reduction reactions by emitting electrons directly into solution without surface adsorption enables new pathways which are not accessible using conventional electrochemical or photochemical processes.     

Large Hexadecametallic {MnIII–LnIII} Wheels: Synthesis,Structural, Magnetic,and Theoretical Characterization

The synthesis, gas sorption studies, magnetic properties, and theoretical studies of new molecular wheels of core type {Mn^III₈Ln^III₈} (Ln=Dy, Ho, Er, Y and Yb), using the ligand mdeaH₂, in the presence of ortho‐toluic or benzoic acid are reported. From the seven wheels studied the {Mn₈Dy₈} and {Mn₈Y₈} analogues exhibit SMM behavior as determined from ac susceptibility experiments in a zero static magnetic field. From DFT calculations a S=16 ground state was determined for the {Mn₈Y₈} complex due to weak ferromagnetic Mn^III–Mn^III interactions. Ab initio CASSCF+RASSI‐SO calculations on the {Mn₈Dy₈} wheel estimated the Mn^III–Dy^III exchange interaction as ?0.1 cm^?1. This weak exchange along with unfavorable single‐ion anisotropy of Dy^III/Mn^III ions, however, led to the observation of SMM behavior with fast magnetic relaxation. The orientation of the g‐anisotropy of the Dy^III ions is found to be perpendicular to the plane of the wheel and this suggests the possibility of toroidal magnetic moments in the cluster. The {Mn₈Ln₈} clusters reported here are the largest heterometallic Mn^IIILn^III wheels and the largest {3d–4f} wheels to exhibit SMM behavior reported to date.     

Über die Umsetzung von Mangan(III) mit Acetylchlorid und die Fällung von Chloromanganaten in Essigsäure

In accordance with spectrophotometric measurements, manganese(III) acetate dihydrate reacts with dilute solutions of acetyl chloride in acetic acid through a 1:1 complex to a red-violet 1:4 compound which is unstable due to the oxidation potential of Mn^III ions. The action of potassium acetate on solutions of Mn^III in acetic acid in presence of a large excess of acetyl chloride leads to a dismutation of managanese(III) and initial precipitation of potassium chloromanganate(IV), K₂MnCl₆. During the reaction of potassium acetate with solutions of manganese(II)/acetic acid/acetyl chloride, under particular conditions, first nonsolvated potassium trichloromanganate(II), KMnCl₃, is formed, which transforms during further addition of potassium ions to tetrapotassium hexachloromanganate(II), K₄MnCl₆.     

Mechanistic Study of the Reactions of l-ascorbic Acid and Oxalic Acid with an Octahedral Manganese(IV) Complex of 1,8-bis(2-hydroxybenzamido)-3,6-diazaoctane

The Mn^IV complex of 1,8-bis(2-hydroxybenzamido)-3,6-diazaoctane (Mn^IVL) with phenolate-amido-amine coordination is reduced by l-ascorbic acid and oxalic acid obeying overall 1:1 stoichiometry. The reactions are biphasic and Mn^IIIL⁻ is the reactive intermediate. The product of oxidation of ascorbic acid (H₂Asc) is dehydroascorbic acid and that of oxalic acid (H₂OX) is CO₂, while Mn^II is the end product from Mn^IV. Both Mn^IVL and Mn^IIIL⁻ form outer sphere adducts with H₂Asc and H₂OX with high values of equilibrium constants of formation (Q>10² dm³ mol⁻¹, I = 0.5 mol dm⁻³, 25.8 °C, 1.5% v/v MeOH+H₂O). The adduct formation is diffusion controlled and is attributed to hydrogen bonding interactions between the reactants. The rate constants for the electron transfer in (Mn^IV/^IIIL, H₂A), (Mn^IV/^IIIL, HA⁻) (H₂A = H₂Asc, H₂OX) and for (Mn^IVL, H₂Asc)+H₂Asc, (Mn^IIIL⁻, HAsc⁻)+HAsc⁻ are reported. There was no evidence of direct coordination of the reductants to the Mn^IV/III center indicating an outer sphere (ET) mechanism.     

Mononuclear Manganese–Peroxo and Bis(μ‐oxo)dimanganese Complexes Bearing a Common N‐Methylated Macrocyclic Ligand

Mononuclear Mn^III–peroxo and dinuclear bis(μ‐oxo)Mn^III₂ complexes that bear a common macrocyclic ligand were synthesized by controlling the concentration of the starting Mn^II complex in the reaction of H₂O₂ (i.e., a Mn^III–peroxo complex at a low concentration (≤1 mM ) and a bis(μ‐oxo)Mn^III₂ complex at a high concentration (≥30 mM )). These intermediates were successfully characterized by various physicochemical methods such as UV–visible spectroscopy, ESI‐MS, resonance Raman, and X‐ray analysis. The structural and spectroscopic characterization combined with density functional theory (DFT) calculations demonstrated unambiguously that the peroxo ligand is bound in a side‐on fashion in the Mn^III–peroxo complex and the Mn₂O₂ diamond core is in the bis(μ‐oxo)Mn^III₂ complex. The reactivity of these intermediates was investigated in electrophilic and nucleophilic reactions, in which only the Mn^III–peroxo complex showed a nucleophilic reactivity in the deformylation of aldehydes.     

Cyano‐Bridged MnIII?MIII Single‐Chain Magnets with MIII=CoIII,FeIII, MnIII,and CrIII

A series of isostructural cyano‐bridged Mn^III(h.s.)–M^III(l.s.) alternating chains, [Mn^III(5‐TMAMsalen)M^III(CN)₆] ? 4H₂O (5‐TMAMsalen^2?=N,N′‐ethylenebis(5‐trimethylammoniomethylsalicylideneiminate), Mn^III(h.s.)=high‐spin Mn^III, M^III(l.s.)=low‐spin Co^III, Mn? Co ; Fe^III, Mn? Fe ; Mn^III, Mn? Mn ; Cr^III, Mn? Cr ) was synthesized by assembling [Mn^III(5‐TMAMsalen)]³⁺ and [M^III(CN)₆]^3?. The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [‐Mn^III‐NC‐M^III‐CN‐] repeating motif, for which the ‐NC‐M^III‐CN‐ motif is provided by the [M^III(CN)₆]^3? moiety adopting a trans bridging mode between [Mn^III(5‐TMAMsalen)]³⁺ cations. The Mn^III and M^III ions occupy special crystallographic positions: a C₂ axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn–Teller axis of the Mn^III(h.s.) ion is perpendicular to the N₂O₂ plane formed by the 5‐TMAMsalen tetradentate ligand. These Jahn–Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn‐N_axis‐C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter‐chain M???M distance being relatively large at 9 Å due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5‐TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn? Fe and Mn? Mn display intra‐chain ferromagnetic interactions, whereas Mn? Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single‐chain magnet (SCM) behavior of these three systems, whereas Mn? Co is merely paramagnetic with S_Mn=2 and D/k_B=?5.3 K (D being a zero‐field splitting parameter). At low temperatures, the Mn? M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite‐chain and finite‐chain regimes for the SCM behavior. These isostructural hetero‐spin SCMs offer a unique series of alternating [‐Mn‐NC‐M‐CN‐] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

Binuclear Homoleptic Manganese(III,III) and Manganese(IV,III) Complexes with Deprotonated D-Mannose from Aqueous Solution

Just a “reducing” sugar —namely, D -mannose—is a starting material in the synthesis of a mixed-valence complex of manganese in the oxidation states +III and +IV . Ba₂[Mn^IIIMn^IV(β-D -ManfH₋₅)₂]Cl⋅14 H₂O (Manf=mannofuranose; the structure of the anion is shown on the right) is prepared in aqueous solution by oxidation of an analogous Mn₂^III complex with oxygen. In neutral solutions the Mn^IIIMn^IV binuclear complex is formed by disproportionation of the Mn₂^III precursor.     

Stability of Residual Oxides in Oxide‐Derived Copper Catalysts for Electrochemical CO2 Reduction Investigated with 18O Labeling

Oxide‐derived (OD) Cu catalysts have high selectivity towards the formation of multi‐carbon products (C₂/C₃) for aqueous electrochemical CO₂ reduction (CO₂R). It has been proposed that a large fraction of the initial oxide can be surprisingly resistant to reduction, and these residual oxides play a crucial catalytic role. The stability of residual oxides was investigated by synthesizing ¹⁸O‐enriched OD Cu catalysts and testing them for CO₂R. These catalysts maintain a high selectivity towards C₂/C₃ products (ca. 60 %) for up to 5 h in 0.1 m KHCO₃ at ?1.0 V vs. RHE. However, secondary‐ion mass spectrometry measurements show that only a small fraction (<1 %) of the original ¹⁸O content remains, showing that residual oxides are not present in significant amounts during CO₂R. Furthermore, we show that OD Cu can reoxidize rapidly, which could compromise the accuracy of ex situ methods for determining the true oxygen content.     

Diverse Ligand‐Functionalized Mixed‐Valent Hexamanganese Sandwiched Silicotungstates with Single‐Molecule Magnet Behavior

Under hydrothermal conditions, replacement of the water molecules in the [Mn^III₄Mn^II₂O₄(H₂O)₄]⁸⁺ cluster of mixed‐valent Mn₆ sandwiched silicotungstate [(B‐α‐SiW₉O₃₄)₂Mn^III₄Mn^II₂O₄(H₂O)₄]^12? ( 1 a ) with organic N ligands led to the isolation of five organic–inorganic hybrid, Mn₆‐substituted polyoxometalates (POMs) 2 – 6 . They were all structurally characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis, diffuse‐reflectance spectroscopy, and powder and single‐crystal X‐ray diffraction. Compounds 2 – 6 represent the first series of mixed‐valent {Mn^III₄Mn^II₂O₄(H₂O)_4?n(L)_n} sandwiched POMs covalently functionalized by organic ligands. The preparation of 1 – 6 not only indicates that the double‐cubane {Mn^III₄Mn^II₂O₄(H₂O)_4?n(L)_n} clusters are very stable fragments in both conventional aqueous solution and hydrothermal systems and that organic functionalization of the [Mn^III₄Mn^II₂O₄(H₂O)₄]⁸⁺ cluster by substitution reactions is feasible, but also demonstrates that hydrothermal environments can promote and facilitate the occurrence of this substitution reaction. This work confirms that hydrothermal synthesis is effective for making novel mixed‐valent POMs substituted with transition‐metal (TM) clusters by combining lacunary Keggin precursors with TM cations and tunable organic ligands. Furthermore, magnetic measurements reveal that 3 and 6 exhibit single‐molecule magnet behavior.     

Novel PEI–AuNPs–MnIIIPPIX nanocomposite with enhanced peroxidase-like catalytic activity in aqueous media

Mn porphyrin provides a possibility to constitute the novel mimic catalyst with peroxidase-like activity. A simple method for preparing a novel catalyst PEI–AuNPs–Mn^IIIPPIX, used in aqueous media, was presented in this paper. The covalent anchoring of Mn^IIIPPIX and PEI were verified, meanwhile gold nanoparticles with the diameter less than 10 nm were dispersed uniformly and stably. The remarkable peroxidase-like catalytic activity of PEI–AuNPs–Mn^IIIPPIX was displayed in the oxidative degradation of azo dye acid orange 7 (AO7) as the model reaction in the presence of trace of H₂O₂. The synergistic effects of PEI–AuNPs and Mn^IIIPPIX on the enhancement of catalytic activity were observed at pH 2.0. Possible pathways involving in the formation of active radicals are proposed. The construction of PEI–AuNPs–Mn^IIIPPIX nanocomposite offers a new insight into the application of Mn porphyrin upon activation of H₂O₂, which have potential applications in many fields.     

Ag@Au Core‐Shell Nanowires for Nearly 100 % CO2‐to‐CO Electroreduction

Electrochemical reduction of carbon dioxide (CO₂) to CO is regarded as an efficient method to utilize the greenhouse gas CO₂, because the CO product can be further converted into high value‐added chemicals via the Fisher–Tropsch process. Among all electrocatalysts used for CO₂‐to‐CO reduction, Au‐based catalysts have been demonstrated to possess high selectivity, but their precious price limits their future large‐scale applications. Thus, simultaneously achieving high selectivity and reasonable price is of great importance for the development of Au‐based catalysts. Here, we report Ag@Au core–shell nanowires as electrocatalyst for CO₂ reduction, in which a nanometer‐thick Au film is uniformly deposited on the core Ag nanowire. Importantly, the Ag@Au catalyst with a relative low Au content can drive CO generation with nearly 100 % Faraday efficiency in 0.1 m KCl electrolyte at an overpotential of ca. ?1.0 V. This high selectivity of CO₂ reduction could be attributed to a suitable adsorption strength for the key intermediate on Au film together with the synergistic effects between the Au shell and Ag core and the strong interaction between CO₂ and Cl^? ions in the electrolyte, which may further pave the way for the development of high‐efficiency electrocatalysts for CO₂ reduction.     

A Porphyrin‐Based Porous rtl Metal–Organic Framework as an Efficient Catalyst for the Cycloaddition of CO2 to Epoxides

A porous rtl metal–organic framework (MOF) [Mn₅L(H₂O)₆?(DMA)₂]?5DMA?4C₂H₅OH ( 1? Mn) (H₁₀L=5,10,15,20‐tetra(4‐(3,5‐dicarboxylphenoxy)phenyl)porphyrin; DMA=N,N′‐dimethylacetamide) was synthesized by employing a new porphyrin‐based octacarboxylic acid ligand. 1? Mn exhibits high Mn^II density in the porous framework, providing it great Lewis‐acid heterogeneous catalytic capability for the cycloaddition of CO₂ with epoxides. Strikingly, 1? Mn features excellent catalytic activity to the cycloaddition of CO₂ to epoxides, with a remarkable initial turnover frequency 400 per mole of catalyst per hour at 20 atm. As‐synthesized 1? Mn also exhibits size selectivity to different epoxide substrates on account of their steric hindrance. The high catalytic activity, size selectivity, and stability toward the epoxides on catalytic cycloaddition of CO₂ make 1? Mn a promising heterogeneous catalyst for fixation and utilization of CO₂.