Efficient electrochemical conversion of carbon monoxide by rhodium octaethylporphyrin adsorbed on carbon black

We have found efficient electrocatalytic removal of CO by rhodium octaethylporphyrin on carbon black at a wide potential range. Using carbon-supported rhodium octaethylporphyrin, we have separated the Rh(II) state participating reaction and the Rh(III) state participating reaction with CO. We have clearly demonstrated electrocatalytic CO oxidation by rhodium(III) porphyrin. The onset potential for CO oxidation is much lower than that for CO oxidation by conventional Pt/Ru catalysts and cobalt porphyrin.     

Thermodynamics of rhodium hydride reactions with CO, aldehydes, and olefins in water: organo-rhodium porphyrin bond dissociation free energies

Tetra(p-sulfonato-phenyl) porphyrin rhodium hydride ([(TSPP)Rh-D(D2O)](-4)) (1) reacts in water (D2O) with carbon monoxide, aldehydes, and olefins to produce metallo formyl, alpha-hydroxyalkyl, and alkyl complexes, respectively. The hydride complex (1) functions as a weak acid in D2O and partially dissociates into a rhodium(I) complex ([(TSPP)Rh(I)(D2O)](-5)) and a proton (D+). Fast substrate reactions of 1 in D2O compared to reactions of rhodium porphyrin hydride ((por)Rh-H) in benzene are ascribed to aqueous media promoting formation of ions and supporting ionic reaction pathways. The regioselectivity for addition of 1 to olefins is predominantly anti-Markovnikov in acidic D2O and exclusively anti-Markovnikov in basic D2O. The range of accessible equilibrium thermodynamic measurements for rhodium hydride substrate reactions is substantially increased in water compared to that in organic media through exploiting the hydrogen ion dependence for the equilibrium distribution of species in aqueous media. Thermodynamic measurements are reported for reactions of a rhodium porphyrin hydride in water with each of the substrates, including CO, H2CO, CH3CHO, CH2=CH2, and sets of aldehydes and olefins. Reactions of rhodium porphyrin hydrides with CO and aldehydes have nearly equal free-energy changes in water and benzene, but alkene reactions that form hydrophobic alkyl groups are substantially less favorable in water than in benzene. Bond dissociation free energies in water are derived from thermodynamic results for (TSPP)Rh-organo complexes in aqueous solution for Rh-CDO, Rh-CH(R)OD, and Rh-CH2CH(D)R units and are compared with related values determined in benzene.     

Reactivity and equilibrium thermodynamic studies of rhodium tetrakis(3,5-disulfonatomesityl)porphyrin species with H2, CO, and olefins in water

Aqueous (D2O) solutions of tetrakis(3,5-disulfonatomesityl)porphyrin rhodium(III) aquo/hydroxo complexes ([(TMPS)Rh(III)(D2O)2]-7 (1), [(TMPS)Rh(III)(OD)(D2O)]-8 (2), and [(TMPS)Rh(III)(OD)2]-9 (3)) react with hydrogen (D2) to form an equilibrium distribution with a rhodium hydride ([(TMPS)Rh-D(D2O)]-8 (4)) and a rhodium(I) complex ([(TMPS)Rh(I)(D2O)]-9 (5)). Equilibrium constants (298 K) are measured that define the distribution for all five of these (TMPS)Rh species in this system as a function of the dihydrogen (D2) and hydrogen ion (D+) concentrations. The hydride complex [(TMPS)Rh-D(D2O)]-8 is a weak acid in D2O (Ka(298 K) = 4.3 x 10(-8)). Steric demands of the TMPS porphyrin ligand prohibit formation of a Rh(II)-Rh(II)-bonded complex, related rhodium(I)-rhodium(III) adducts, and intermolecular association of alkyl complexes which are prominent features of the rhodium tetra(p-sulfonatophenyl)porphyrin ((TSPP)Rh) system. The rhodium(II) complex ([(TMPS)Rh(II)(D2O)]-8) reacts with water to form hydride and hydroxide complexes and is not observed in D2O. The (TMPS)Rh-OD and (TMPS)Rh-D bond dissociation free energies (BDFE) are virtually equal and have a value of approximately 60 kcal mol(-1). Reactions of [(TMPS)Rh-D(D2O)]-8 in water with CO and olefins produce rhodium formyl and alkyl complexes which have equilibrium thermodynamic values comparable to the values for the corresponding substrate reactions of [(TSPP)Rh-D(D2O)]-4.     

Ligand Fluorination to Optimize Preferential Oxidation (PROX) of Carbon Monoxide by Water-Soluble Rhodium Porphyrins

Catalytic, low temperature preferential oxidation (PROX) of carbon monoxide by aqueous [5,10,15,20-tetrakis(4-sulfonatophenyl)-2,3,7,8,12,13,17,18-octafluoroporphyrinato]rhodium(III) tetrasodium salt, (1[Rh(III)]) and [5,10,15,20-tetrakis(3-sulfonato-2,6-difluorophenyl)-2,3,7,8,12,13,17,18-octafluoroporphyrinato]rhodium(III) tetrasodium salt, (2[Rh(III)]) is reported. The PROX reaction occurs at ambient temperature in buffered (4 ≤ pH ≤ 13) aqueous solutions. Fluorination on the porphyrin periphery is shown to increase the CO PROX reaction rate, shift the metal centered redox potentials, and acidify ligated water molecules. Most importantly, β-fluorination increases the acidity of the rhodium hydride complex (pK(a) = 2.2 ± 0.2 for 2[Rh-D]); the dramatically increased acidity of the Rh(III) hydride complex precludes proton reduction and hydrogen activation near neutral pH, thereby permitting oxidation of CO to be unaffected by the presence of H(2). This new fluorinated water-soluble rhodium porphyrin-based homogenous catalyst system permits preferential oxidation of carbon monoxide in hydrogen gas streams at 308 °K using dioxygen or a sacrificial electron acceptor (indigo carmine) as the terminal oxidant.     

Aqueous organometallic reactions of rhodium porphyrins: equilibrium thermodynamics

The reactivity and equilibrium thermodynamic studies of tetra-p-sulfonatophenyl porphyrin rhodium hydride ([(TSPP)Rh-D]-4) with CO, aldehydes and olefins that produce formyl, alpha-hydroxyalkyl and alkyl complexes have been explored in water and compared with the related reactions in non-aqueous media.     

Theoretical study of stability, structures, and aromaticity of multiply N-confused porphyrins.

The total electronic energy and nucleus-independent chemical shift (NICS) of 95 isomers of N-confused porphyrin (NCP: normal porphyrin (N(0)CP), singly N-confused porphyrin (N(1)CP), doubly N-confused porphyrin (N(2)CP), triply N-confused porphyrin (N(3)CP), and fully N-confused porphyrin (N(4)CP)) have been calculated by the density functional theory (DFT) method. The stability of NCP decreased by increasing the number of confused pyrrole rings. Namely, the relative energies of the most stable isomers in each confusion level increased in a stepwise manner approximately by +18 kcal/mol: 0 (N(0)CP1), +17.147 (N(1)CP2), +37.461 (N(2)CPb3), +54.031 (N(3)CPd6), and +65.636 kcal/mol (N(4)CPc8). In this order, the mean plane deviation of these isomers increased from 0.000 to 0.123, 0.170, 0.215, and 0.251 A, respectively. The unusual tautomeric forms of pyrrole ring with an sp(3)-carbon were found in the stable forms of N(3)CP and N(4)CP. The NICS values at the mean position of the 24 core atoms were nearly the same for the most aromatic isomers regardless of the confusion level: -15.1280 (N(0)CP1), -13.8493 (N(1)CP2), -13.7267 (N(2)CPd1), -11.7723 (N(3)CPb5), and -13.6224 ppm (N(4)CPa6). The positive correlation between aromaticity and stability was inferred from the plots of NICS and the relative energy of NCP for N(0)CP, N(1)CP, and trans-N(2)CP. On the other hand, the correlation was negative for cis-N(2)CP, N(3)CP, and N(4)CP isomers.     

High-frequency and -field EPR investigation of a manganese(III) N-confused porphyrin complex, [Mn(NCTPP)(py)2

We report the first high-frequency and -field electron paramagnetic resonance (HFEPR) study of a Mn(III) N-confused porphyrin (NCP) complex (NCP is also known as inverted porphyrin or 2-aza-21-carbaporphyrin). We have found a striking variation in the electronic properties of the S = 2 Mn(III) ion coordinated by NCP compared to other Mn(III) porphyrinoid complexes. Thus, inversion of a single pyrrole ring greatly changes the equatorial ligand field exerted and leads to large magnitudes of both the axial and rhombic zero-field splitting [respectively, D = -3.084(3) cm(-1), E = -0.608(3) cm(-1)], which are unprecedented in other Mn(III) porphyrinoids.     

Two Rhodium(III) Ions Confined in a [18]Porphyrin Frame: 5,10,15,20-Tetraaryl-21,23-Dirhodaporphyrin

Tetraaryl-21,23-dirhodaporphyrin and a series of related monorhodaporphyrins have been obtained by tellurium-to-rhodium exchange in a reaction of tetraaryl-21,23-ditelluraporphyrin with [RhCl(CO)₂]₂. These organometallic metallaporphyrins contain rhodium(III) centers embedded in rhodacyclopentadiene rings, incorporated within the porphyrin frames. The skeletons of 21,23-dirhodaporphyrin and 21-rhoda-23-telluraporphyrin are strongly deformed in-plane from the rectangular shape typical for porphyrins, due to rhodium(III) coordination preferences, the large size of the two core atoms, and the porphyrin skeleton constrains. These two metallaporphyrins exhibit fluxional behavior, as studied by ¹H NMR and DFT, involving the in-plane motion and the switch of the rhodium center(s) between two nitrogen donors. A side product detected in the reaction mixture, 21-oxa-23-rhodaporphyrin, results from tellurium-to-oxygen exchange, occurring in parallel to the tellurium-to-rhodium exchange. The reaction paths and mechanisms have been analyzed. The title 21,23-dirhodaporphyrin contains a bridged bimetallic unit, Rh₂Cl₂, in the center of the macrocycle, with two rhodium(III) ions lying approximately in the plane of the porphyrinoid skeleton. The geometry of the implanted Rh₂Cl₂ unit is affected by macrocyclic constrains.     

Activation of aliphatic carbon-carbon bonds of esters and amides by rhodium(II) porphyrin

Aliphatic carbon-carbon bonds of esters and amides were activated successfully with rhodium(II) porphyrin radical to give rhodium(III) porphyrin alkyls in moderate yields.     

State of supported rhodium nanoparticles for methane catalytic partial oxidation (CPO): FT-IR studies

The effect of pretreatments as well as of rhodium precursor and of the support over the morphology of Rh nanoparticles were investigated by Fourier transform infrared (FT-IR) spectroscopy of adsorbed CO. Over a Rh/alumina catalyst, both metallic Rh particles, characterized by IR bands in the range 2070-2060 cm-1 and 1820-1850 cm-1, and highly dispersed rhodium species, characterized by symmetric and asymmetric stretching bands of RhI(CO)2 gem-dicarbonyl species, are present. Their relative amount changes following pretreatments with gaseous mixtures, representative of the catalytic partial oxidation (CPO) reaction process. The Rh metal particle fraction decreases with respect to the Rh highly dispersed fraction in the order CO approximately CO/H2 > CH4/H2O, CH4/O2 > CH4 > H2. The metal particle dimensions decrease in the order CH4/O2 > H2 > CH4/H2O > CO > CO/H2. Grafting from a carbonyl rhodium complex also increases the amount and the dimensions of Rh0 particles at the catalyst surface. Increasing the ratio (extended rhodium metal particles/highly dispersed Rh species) allows a shorter conditioning process. The surface reconstruction phenomena going on during catalytic activity are related to this effect.     

Carbon-nitrogen bond activation of amines by rhodium(III) porphyrin complexes

Carbon-nitrogen bond activation of amines by rhodium porphyrin chloride has been achieved to give rhodium porphyrin alkyl complexes. Rhodium porphyrin hydride and rhodium porphyrin dimer were proposed as the intermediates in cleaving the C-N bond.     

Reactions of nitroxides with metalloporphyrin alkyls bearing beta hydrogens: Aliphatic carbon-carbon bond activation by metal centered radicals

Nitroxide-induced beta-hydrogen atom abstraction and beta-elimination of rhodium porphyrin alkyls have been observed. Rhodium(II) porphyrin radical were proposed intermediates to form first and subsequently reacted via aliphatic carbon-carbon bond activation with alkyl substituted nitroxides to yield rhodium porphyrin alkyl complexes.     

Sensitive and selective chromogenic sensing of carbon monoxide via reversible axial CO coordination in binuclear rhodium complexes

The study of probes for CO sensing of a family of binuclear rhodium(II) compounds of general formula [Rh(2){(XC(6)H(3))P(XC(6)H(4))}(n)(O(2)CR)(4-n)]·L(2) containing one or two metalated phosphines (in a head-to-tail arrangement) and different axial ligands has been conducted. Chloroform solutions of these complexes underwent rapid color change, from purple to yellow, when air samples containing CO were bubbled through them. The binuclear rhodium complexes were also adsorbed on silica and used as colorimetric probes for "naked eye" CO detection in the gas phase. When the gray-purple colored silica solids containing the rhodium probes were exposed to air containing increasing concentrations of CO, two colors were observed, in agreement with the formation of two different products. The results are consistent with an axial coordination of the CO molecule in one axial position (pink-orange) or in both (yellow). The crystal structure of 3·(CO) ([Rh(2){(C(6)H(4))P(C(6)H(5))(2)}(2)(O(2)CCF(3))(2)]·CO) was solved by single X-ray diffraction techniques. In all cases, the binuclear rhodium complexes studied showed a high selective response to CO with a remarkable low detection limit. For instance, compound 5·(CH(3)CO(2)H)(2) ([Rh(2){(m-CH(3)C(6)H(3))P(m-CH(3)C(6)H(4))(2)}(2)(O(2)CCH(3))(2)]·(CH(3)CO(2)H)(2)) is capable of detection of CO to the "naked eye" at concentrations as low as 0.2 ppm in air. Furthermore, the binding of CO in these rhodium complexes was found to be fully reversible, and release studies of carbon monoxide via thermogravimetric measurements have also been carried out. The importance of the silica support for the maintenance of the CO-displaced L ligands in the vicinity of the probes in a noninnocent manner has been also proved.     

Rhodium cluster complexes containing bridging phenylgermanium ligands

The reaction of Rh(4)(CO)(12) with Ph(3)GeH at 97 degrees C has yielded the first rhodium cluster complexes containing bridging germylene and germylyne ligands: Rh(8)(CO)(12)(mu(4)-GePh)(6), 9, and Rh(3)(CO)(5)(GePh(3))(mu-GePh(2))(3)(mu(3)-GePh)(mu-H), 10. When the reaction is performed under hydrogen, the yield of 9 is increased to 42% and no 10 is formed. Compound 9 contains a cluster of eight rhodium atoms arranged in the form of a distorted cube. There are six mu(4)-GePh groups bridging each face of this distorted cube. Four of the rhodium atoms have two terminal carbonyl ligands, while the remaining four rhodium atoms have only one carbonyl ligand. Compound 10 contains a triangular cluster of three rhodium atoms with one terminal GePh(3) ligand, three bridging GePh(2) ligands, and one triply bridging GePh ligand. There is also one hydrido ligand that is believed to bridge one of the Rh-Ge bonds. Compound 9 reacted with PPhMe(2) at 25 degrees C to give the tetraphosphine derivative Rh(8)(CO)(8)(PPhMe(2))(4)(mu(4)-GePh)(6), 11. The structure of 11 is similar to 9 except that a PPhMe(2) ligand has replaced a carbonyl ligand on each the four Rh(CO)(2) groups. Compound 10 reacted with CO at 68 degrees C to give the complex Rh(3)(CO)(6)(mu-GePh(2))(3)(mu(3)-GePh), 12. Compound 12 is formed by the loss of the hydrido ligand and the terminal GePh(3) ligand from 10 and the addition of one carbonyl ligand. All compounds were fully characterized by IR, NMR, elemental, and single-crystal X-ray diffraction analyses.     

Carbonyl complexes of rhodium(I) and rhodium(III) with 2,2′-biquinoline

Novel carbonyl complexes of rhodium(I) and rhodium(III) containing the bidenate nitrogen donor ligand 2,2′-biquinoline (biq) have been prepared; they are of the types RhX(CO)₂ biq and RhX(CO)biq (X = Cl, Br, I). Cationic carbonyl and substituted carbonyl complexes of the types [Rh(CO)₂biq]ClO₄ and [Rh(CO)biqL₂]ClO₄, where L is tertiary phosphine or arsine have also been isolated. In spite of considerable steric crowding around the nitrogen atoms, 2,2′-biquinoline behaves much like 2,2′-bipyridine in forming carbonyl complexes of rhodium.     

N‐Confused Porphyrin‐aza‐Dipyrrin Chimera: A Versatile Metal Coordination Ligand Using its Unique NH Tautomerism

A novel N‐confused porphyrin (NCP) analogue bearing an external aza‐dipyrrin‐like coordination site was synthesized by a Schiff‐base forming reaction of N‐confused oxoporphyrin and 2‐aminopyridine derivatives. The chimera molecule enhances the intrinsic NH tautomerism of NCP to enable four possible tautomeric structures, three of which were identified by metal coordination.     

Halide Anion Mediated Dimerization of a meso‐Unsubstituted N‐Confused Porphyrin

The new N‐confused porphyrin (NCP) derivatives, meso‐unsubstituted β‐alkyl‐3‐oxo N‐confused porphyrin (3‐oxo‐NCP) and related macrocycles, were synthesized from appropriate pyrrolic precursors by a [3+1]‐type condensation reaction. 3‐Oxo‐NCP forms a self‐assembled dimer in dichloromethane that is stabilized by complementary hydrogen‐bonding interactions arising from the peripheral amide‐like moieties. The protonated form of 3‐oxo‐NCP was observed to bind halide anions (F^?, Cl^?) through the outer NH and the inner pyrrolic NH groups, thus affording a dimer in dichloromethane. The structure of the chloride‐bridged dimer in the solid state was determined by X‐ray diffraction analysis.     

Synthesis and properties of rhodium(III) porphyrin cyclic tetramer and cofacial dimer

Rhodium(III) porphyrin complexes, [Rh(4-PyT(3)P)Cl](4) (1) and [Rh(2-PytB(3)P)Cl](2) (2) (4-PyT(3)P = 5-(4-pyridyl)-10,15,20-tritolylporphyrinato dianion, 2-PytB(3)P = 5-(2-pyridyl)-10,15,20-tri(4-tert-butyl)phenylporphyrinato dianion), were self-assembled and characterized by (1)H nuclear magnetic resonance spectroscopy, infrared spectroscopy, and electron spray ionization-mass spectroscopy methods. The spectroscopic results certified that the rhodium porphyrin complexes 1 and 2 have a cyclic tetrameric structure and a cofacial dimeric structure, respectively. The X-ray structure analysis of 1 confirmed the cyclic structure of the complex. The Soret bands of both oligomers were significantly broadened by excitonic interactions between the porphyrin units, compared to those observed for a corresponding analogue of Rh(TTP)(Py)Cl (TTP = 5,10,15,20-tetratolylporphyrinato dianion, Py = pyridine). Stepwise oxidation of the porphyrin rings in the oligomers was observed by cyclic voltammetry. The oligomers 1 and 2 are very stable in solution, and they slowly undergo reactions with pyridine to give corresponding monomer complexes only at high temperatures (approximately 80 degrees C).     

Catalytic reactions on neutral Rh oxide clusters more efficient than on neutral Rh clusters

Gas phase catalytic reactions involving the reduction of N(2)O and oxidation of CO were observed at the molecular level on isolated neutral rhodium clusters, Rh(n) (n = 10-28), using mass spectrometry. Sequential oxygen transfer reactions, Rh(n)O(m-1) + N(2)O → Rh(n)O(m) + N(2) (m = 1, 2, 3,…), were monitored and the rate constant for each reaction step was determined as a function of the cluster size. Oxygen extraction reactions by a CO molecule, Rh(n)O(m) + CO → Rh(n)O(m-1) + CO(2) (m = 1, 2, 3,…), were also observed when a small amount of CO was mixed with the reactant N(2)O gas. The rate constants of the oxygen extraction reactions by CO for m ≥ 4 were found to be two or three orders of magnitude higher than the rate constants for m ≤ 3, which indicates that the catalytic reaction proceeds more efficiently when the reaction cycles turn over around Rh(n)O(m) (m ≥ 4) than around bare Rh(n). Rhodium clusters operate as more efficient catalysts when they are oxidized than non- or less-oxidized rhodium clusters, which is consistent with theoretical and experimental studies on the catalytic CO oxidation reaction on a rhodium surface.     

Oxidation of the [Rh(CO)2Cl2] anion in aqueous solution

The reaction of rhodium(I) carbonyl chloride, [Rh(CO)₂Cl]₂, with dichromate, cerium(IV) sulfate, hexachloroplatinic acid or p-benzoquinone in aqueous hydrochloric acid proceeds by consumption of 4 equivalents of oxidizing agent per mole or rhodium(I) in accordance with the equation Rh^I(CO)₂  4e + H₂O → Rh^III(CO) + 2H⁺ + CO₂A “cyclic” oxidation mechanism is suggested.