Linear polymers of allyl acrylate and allyl methacrylate

Allyl acrylate and allyl methacrylate were polymerized by anionic initiators to soluble linear polymers containing allyl groups in the pendant side chains. The pendant unpolymerized allyl groups of the resulting linear poly(allyl acrylates) were shown to be present by: (1) the disappearance of the acrylyl and methacrylyl double bond absorptions in the infrared spectra in the conversions of monomers to polymers; (2) postbromination of the allyl bonds in the linear polymer; (3) the disappearance of the allyl groups absorptions in the infrared spectra of the brominated linear polymers; and (4) the thermal- and radical-initiated crosslinking of the linear polymers through the allyl groups. Allyl acrylate and allyl methacrylate show great reluctance to copolymerize with styrene under anionic initiation, but copolymerize readily with methyl methacrylate and acrylonitrile. Block copolymers were prepared by reacting allyl methacrylate with preformed polystyrene and poly(methyl methacrylate) anions. The linear polymers and copolymers of allyl acrylate may be classified as “self-reactive” polymers which yield thermosetting polymers. Bromination of the linear polymers offers a convenient method of producing self-extinguishing polymers.     

Patterning on nonplanar substrates: flexible honeycomb films from a range of self-assembling star copolymers

The effect of glass transition temperature, Tg, on the self-assembly of "honeycomb" microstructures on nonplanar substrates was probed by the synthesis of a library of core cross-linked star polymers with different arm compositions. Star polymers based on poly(dimethyl siloxane), poly(ethyl acrylate), poly(methyl acrylate), poly(tert-butyl acrylate), and poly(methyl methacrylate) were synthesized by the "arm first" strategy using atom-transfer radical polymerization. Reaction conditions were optimized, and a series of high molecular weight star polymers were prepared in high yield. The glass transition temperature of the star polymers ranged from -123 to 100 degrees C which allowed the suitability for the formation of porous honeycomb-like films via the "breath figure" technique on nonplanar surfaces to be investigated. All star compositions successfully formed ordered films on flat surfaces. However, only star polymer compositions with a Tg below 48 degrees C could form homogeneous honeycomb coatings on the surface of nonplanar substrates.     

Resorcinarene‐based ATRP initiators for star polymers

Two novel multifunctional initiators for atom transfer radical polymerization (ATRP) were synthesized by derivatization of tetraethylresorcinarene. The derivatization induced a change in the conformation of the resorcinarene ring, which was confirmed by NMR spectroscopy. The initiators were used in ATRP of tert‐butyl acrylate and methyl methacrylate, producing star polymers with controlled molar masses and low polydispersities. Instead of the expected star polymers with eight arms, polymers with four arms were obtained. Conformational studies on the initiators by rotating‐frame nuclear Overhauser and exchange spectroscopy NMR and molecular modeling suggested that of eight initiator functional groups on tetraethylresorcinarene, four are too close to each other to be able to initiate the chain growth. Starlike poly(tert‐butyl acrylate) macroinitiators were used further in the block copolymerization of methyl methacrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4189–4201, 2004     

N‐Bromosuccinimide as a thermal iniferter for radical polymerization

N‐Bromosuccinimide (NBS) was used as a thermal iniferter for the initiation of the bulk polymerizations of methyl methacrylate, methyl acrylate, and styrene. The polymerizations showed the characteristics of a living polymerization: both the yields and the molecular weights of the resultant polymers increased linearly as the reaction time increased. The molecular weight distributions of the polymers were 1.42–1.95 under the studied conditions. The resultant polymers could be used as macroiniferters to reinitiate the polymerization of the second monomer. The copolymers poly(methyl methacrylate)‐b‐polystyrene and polystyrene‐b‐poly(methyl methacrylate) were obtained and characterized. End‐group analysis of the resultant poly(methyl methacrylate), poly(methyl acrylate), and polystyrene confirmed that NBS behaved as a thermal iniferter. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2567–2573, 2005     

Preparation and Characterization of Poly(methyl methacrylate)-functionalized Carboxyl Multi-wall Carbon Nanotubes

"An in situ polymerization process was used to prepare poly (methyl methacrylate) (PMMA)-functionalized carboxyl multi-walled carbon nanotubes using carboxylate carbon nanotubes and methyl methacrylate as reactants and benzoyl peroxide as an initiator agent. The functionalized multi-walled carbon nanotubes were characterized using transmission electron microscope, scanning electron microscope, nuclear magnetic resonance, Fourier transform infrared spectroscopy, thermogravimetric analysis and Raman. The results indicate that the PMMA chains are covalently linked with the surface of carboxylate carbon nanotubes. The surface morphology is controlled by the content of carboxylate carbon nanotubes in the reactants. The PMMA functionalized multi-walled carbon nanotubes are soluble in deuterated chloroform. The storage modulus and tanffi magnitude increase as the content of CCNTs increases up to 0.3%."     

Preparation of platinum nanoparticles using star-block copolymer with a carboxylic core

Well-defined star polymers containing a functionalized core supply a molecular nanocavity and may be used to control formation of inorganic nanoparticles. Herein, platinum (Pt) nanoparticles of 2-4 nm were prepared by using (poly(acrylic acid)-b-polystyrene)6 (PAA-b-PS)6 amphiphilic star block copolymer as a novel single molecular stabilizer. This PAA core functionalized star polymer was obtained by hydrolysis of (poly(tert-butyl acrylate)-b-polystyrene)6 (PtBA-b-PS)6, which was synthesized by sequential atom transfer radical polymerization (ATRP) of tert-butyl acrylate and styrene with an initiator bearing six 2-bromoisobutyloxyl groups. Pt(IV) ions were loaded by ion exchange to the core of the star polymer and Pt nanoparticle stabilized by single star polymer was produced by a reduction with NaBH4.     

Functionalization of polymers prepared by ATRP using radical addition reactions

Low molecular weight linear poly(methyl acrylate), star and hyperbranched polymers were synthesized using atom transfer radical polymerization (ATRP) and end‐functionalized using radical addition reactions. By adding allyltri‐n‐butylstannane at the end of the polymerization of poly(methyl acrylate), the polymer was terminated by allyl groups. When at high conversions of the acrylate monomer, allyl alcohol or 1,2‐epoxy‐5‐hexene, monomers which are not polymerizable by ATRP, were added, alcohol and epoxy functionalities respectively were incorporated at the polymer chain end. Functionalization by radical addition reactions was demonstrated to be applicable to multi‐functional polymers such as hyperbranched and star polymers.     

Polymerization of adsorbed monolayers. III. Preliminary structure studies in dilute solution of the insertion polymers

Insertion poly(methyl acrylate) and poly(methyl methacrylate) were prepared from monomers adsorbed in monolayers on the surface of montmorillonite clay, both in the presence and in the absence of bifunctional crosslinkers (ethylene glycol dimethacrylate and tetramethylene glycol dimethacrylate). The insertion poly(methyl acrylate) and the crosslinked insertion poly(methyl methacrylate) and dilute-solution properties quite different from conventional polymers of these monomers, the differences including high light-scattering molecular weights combined with low viscosities, low values of the second virial coefficient, unusually large variations of the Huggins' constant k′ with the time-temperature history of the solutions, and low sedimentation velocities. These properties suggest that the insertion polymers have compact structures and are consistent with the postulate of sheetlike macromolecules. The dilute-solution properties of insertion poly(methyl methacrylate) made without crosslinker, unlike those of similarly prepared poly(methyl acrylate), were similar to those of conventional poly(methyl methacrylate). This difference in behavior is attributed to the different tendencies of the two monomers to undergo branching or crosslinking during radical polymerization.     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

Synthesis and utility of ethylene (meth)acrylate copolymers prepared by a tandem ring-opening polymerization hydrogenation strategy

One new and one established functional cyclooctene were prepared and (co)polymerized using ring-opening metathesis polymerization. The resulting polymers were hydrogenated to yield the corresponding functional polyolefins that were structurally equivalent to copolymers of ethylene and either methyl methacrylate, t-butyl acrylate, or acrylic acid after deprotection. The copolymers that incorporate methyl methacrylate into the backbone were used as compatibilizers for poly(methyl methacrylate)/polyethylene blends. The copolymers that incorporate t-butyl acrylate into the backbone yielded elastomers that could be thermally crosslinked. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3117–3126     

Thermal degradation of bromine-containing polymers: Part 11—Blends of poly(2,3-dibromopropyl methacrylate) and poly(2,3-dibromopropyl acrylate) with poly(methyl methacrylate) and poly(methyl acrylate)

The products of degradation of blends of poly(2,3-dibromopropyl methacrylate) and poly(2,3-dibromopropyl acrylate) with poly(methyl methacrylate) and poly(methyl acrylate) are predominantly those to be expected from the degradation of the individual polymers. However, the appearance of methyl bromide and methanol from all four blends indicates that some interaction does occur across the phase boundary between the two constituent polymers. This is presumed to consist of the reaction of hydrogen bromide, formed by decomposition of the brominated polymers with the methyl groups of the acrylate and methacrylate polymers.     

Post-lactonization of vinyl polymers containing pendent ester and hydroxymethyl groups

Copolymers of methyl methacrylate with methyl and ethyl α-hydroxymethylacrylate and with α-hydroxymethylstyrene have been prepared with free-radical initiators at temperatures below 80°C. At higher reaction temperatures or under extrusion conditions, alcohol was eliminated and the free hydroxyl content was greatly decreased. All evidence indicates the formation of six-membered lactone groups in this post-polymerization reaction: direct evidence for their formation is lacking, however, since neither infrared nor nuclear magnetic resonance spectra could be used to detect lactonization in this system. The loss of activity from ¹⁴C ester-labeled methyl methacrylate copolymer on heating could be correlated with the extent of lactonization. The degree of lactonization is relatively less with copolymers containing higher amounts of hydroxymethyl groups. The resulting polymers exhibit higher heat distortion temperatures and decreased impact resistance when compared to poly(methyl methacrylate). Attempts were made to incorporate similar lactone structures by cyclocopolymerization with methyl methacrylate of α-methacryloxymethylstyrene or ethyl α-methacryloxymethylacrylate, but only crosslinked polymers or polymers with pendent unsaturation were found.     

Polymerization of 2-(substituted methyl)acrylate bearing ω-methoxyoligoethyleneoxy groups as side chains to new low Tg polymer

The polymerization of methyl 2-(ω-methoxyoligoethleneoxymethyl)acrylates, which were synthesized from reactions of methyl 2-bromomethylacrylate with ω-methoxyoligoethylene glycol, was investigated. All these monomers polymerized readily to high molecular weight despite expectation of the considerable steric hindrance against propagation. No influence of ceiling temperature was observed. The 2-(2-methoxyethyleneoxymethyl)acrylate exhibited similar reactivities to methyl 2-alkoxymethylacrylate reported previously in copolymerization with styrene and methyl methacrylate. The homopolymers synthesized, except for those from methyl 2-methoxymethyl- and 2-(2-methoxyethyleneoxymethyl)acrylates, were soluble in water, and all were soluble in benzene. These polymers were thermally less stable than poly(methyl methacrylate) as confirmed by thermogravimetric analysis, and all showed glass transition temperatures below 0°C. © 1993 John Wiley & Sons, Inc.     

丙烯酸三苯甲酯及其衍生物的不对称聚合反应

含有大位阻基团的1,1-双取代α,β-不饱和酯,诸如甲基丙烯酸三苯甲酯(TrMA)、甲基丙烯酸邻甲苯基二苯基甲酯(DPIMA),在不对称聚合反应中,能够形成具有单手螺旋构象的旋光性聚合物。这类聚合物因具有独特的手性识别能力而一直为人们所瞩目。现有的研究结果表明,在这类单体的不对称聚合反应中,手性配体如鹰爪豆碱[(—)-Sp]决定着聚合产物     

Synthesis of thiol functionalized poly(meth)acrylates through enzymatic catalysis and a subsequent one pot reaction process

The synthesis and modification of thiol functionalized poly(meth)acrylates using a straightforward reaction concept that consists of an enzymatically catalyzed monomer synthesis, free radical polymerization and post-polymerization modification is presented. The well-known enzymatic transacylation of methyl acrylate and methyl methacrylate that runs under mild and environmentally friendly conditions was used to synthesize thiol protected acrylic and methacrylic monomers. Upon free radical polymerization and subsequent removal of protection groups, polymers with pendant thiol groups are obtained, which, in turn, can react in situ with Michael acceptors to form thiol-ene reaction products. The exceptional advantage of the proposed method is that upon removal of the enzyme from the monomer mixture, the polymerization, deprotection of thiols and subsequent Thio-Michael-type addition reaction can be conducted in one pot without purification of the intermediate products. Furthermore, the different reactivities of acetyl and benzoyl protection groups in lipase catalyzed reactions are discussed.     

Vinyl polymerization initiated by reducing compounds of transition metals—5. Graft copolymerization of chlorine containing polymers by vanadium(III) chloride

Graft copolymerization of methyl methacrylate (MMA) on chlorine containing polymers [e.g. trichloroacetates of poly(vinyl alcohol), microcrystalline cellulose or starch and chlorinated atactic polypropylene] in the presence of vanadium(III) chloride (VCl₃) was carried out in dimethylformamide at 70°. The grafting n-butyl methacrylate or ethyl acrylate on poly(vinyl trichloroacetate) displayed high efficiency; in the first system, however, crosslinked polymer fractions were formed. The number-average molecular weight of grafted branches was determined. Chromium(II) acetate and titanium(III) chloride are less efficient initiators for polymerization of methacrylates in the presence of trichloroacetates.     

Synthesis and study of photochromic properties of copolymers based on functionalized chromenes

Chromenes functionalized with methacryl groups were synthesized and involved into the radical polymerization to obtain copolymers with ethyl acrylate. Comparison of spectral kinetic characteristics of poly(methyl methacrylate) glasses containing chromenes and photochromic copolymers as additives led to a conclusion that incorporation of a photochromic compound as a part of a copolymer into the polymeric glass increases efficiency of photocoloration of photochromic compounds in the polymeric layer.     

Polymerization of (meth)acrylates with aluminum-based initiators

<正>A simple and effective way to prepare poly(acrylate)s,such as poly(methacrylate),poly(butyl acrylate) and poly(butyl methacrylate),has been achieved by using the single component aluminum-based compounds,such as modified methylaluminoxane(MMAO),triisobutylaluminium(TIBA) and triethylaluminium(TEA) as initiators.Effective initiations and high molecular weight polymers with unimodal molecular weight distributions could be easily obtained by varying the reaction parameters of systems under mild conditions.Although these aluminum compounds were inefficient initiators for methyl methacrylate(MMA) polymerization,they exhibited remarkable catalytic activity for butyl methacrylate(BMA) polymerization,affording high molecular weight poly(BMA)s.     

Effect of ligand on the synthesis of star polymers by resorcinarene‐based ATRP initiators

The effect of the steric hindrance on the initiating properties of two multifunctional resorcinarene‐based initiators in atom transfer radical polymerization (ATRP) was studied by using Cu(I)‐complexes of three multidentate amine ligands in the polymerization of tert‐butyl acrylate and methyl methacrylate. These ligands are less sterically hindered and have higher activities in the catalysis of ATRP of (meth)acrylates than 2,2′‐bipyridine. The polymerizations were faster and more controlled than with the 2,2′‐bipyridyl catalyst, but the tendency for bimolecular coupling increased. Even though the initiator was octafunctional, the resulting star polymers had only four arms. This indicates that the steric hindrance arising from the conformations of the initiators determines the structure of the polymer, but the ligand noticeably affects the controllability of the polymerization © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3349–3358, 2005     

Preparation and characterization of optically active polymers containing pendent and terminal chiral units via atom transfer radical polymerization

Optically active homopolymers and copolymers, bearing chiral units at the side chain and end chain, were prepared via atom transfer radical polymerization (ATRP) techniques. The well‐defined optically active polymers were obtained via the ATRP of pregnenolone methacrylate (PR‐MA), β‐cholestanol acrylate (CH‐A), and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one acrylate (HPD‐A) with ethyl 2‐bromopropionate as the initiator and CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as the catalytic system. The experimental results showed that the polymerizations of PR‐MA, CH‐A, and HPD‐A proceeded in a living fashion, providing pendent chiral group polymers with low molecular weight distributions and predetermined molecular weights that increased linearly with the monomer conversion. Furthermore, the copolymers poly(pregnenolone methacrylate)‐b‐poly[(dimethylamino)ethyl methacrylate] and poly(pregnenolone methacrylate‐co‐methyl methacrylate) were synthesized and characterized with ¹H NMR, transmission electron microscopy, and polarimetric analysis. In addition, when optically active initiators estrone 2‐bromopropionate and 20‐(hydroxymethyl)‐pregna‐1,4‐dien‐3‐one 2‐bromopropionate were used for ATRPs of methyl methacrylate and styrene, terminal optically active poly(methyl methacrylate) and polystyrene were obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1502–1513, 2006