Oxidation of dimethyl ether: Absolute rate constants for the self reaction of CH3OCH2 radicals,the reaction of CH3OCH2 radicals with O2, and the thermal decomposition of CH3OCH2 radicals

The rate constant for the reaction of CH₃OCH₂ radicals with O₂ (reaction (1)) and the self reaction of CH₃OCH₂ radicals (reaction (5)) were measured using pulse radiolysis coupled with time resolved UV absorption spectroscopy. k₁ was studied at 296K over the pressure range 0.025–1 bar and in the temperature range 296–473K at 18 bar total pressure. Reaction (1) is known to proceed through the following mechanism: CH₃OCH₂ + O₂ ↔ CH₃OCH₂O₂^# → CH₂OCH₂O₂H^# → 2HCHO + OH (k_prod) CH₃OCH₂ + O₂ ↔ CH₃OCH₂O₂^# + M → CH₃OCH₂O₂ + M (k_RO2) k = k_RO2 + k_prod, where k_RO2 is the rate constant for peroxy radical production and k_prod is the rate constant for formaldehyde production. The k₁ values obtained at 296K together with the available literature values for k₁ determined at low pressures were fitted using a modified Lindemann mechanism and the following parameters were obtained: k_RO2,0 = (9.4 ± 4.2) × 10⁻³⁰ cm⁶ molecule⁻² s⁻¹, k_RO2,∞ = (1.14 ± 0.04) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹, and k_prod,0 = (6.0 ± 0.5) × 10⁻¹² cm³ molecule⁻¹ s⁻¹, where k_RO2,0 and k_RO2,∞ are the overall termolecular and bimolecular rate constants for formation of CH₃OCH₂O₂ radicals and k_prod,0 represents the bimolecular rate constant for the reaction of CH₃OCH₂ radicals with O₂ to yield formaldehyde in the limit of low pressure. k_RO2,∞ = (1.07 ± 0.08) × 10⁻¹¹ exp(−(46 ± 27)/T) cm³ molecule⁻¹ s⁻¹ was determined at 18 bar total pressure over the temperature range 296–473K. At 1 bar total pressure and 296K, k₅ = (4.1 ± 0.5) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ and at 18 bar total pressure over the temperature range 296–523K, k₅ = (4.7 ± 0.6) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹. As a part of this study the decay rate of CH₃OCH₂ radicals was used to study the thermal decomposition of CH₃OCH₂ radicals in the temperature range 573–666K at 18 bar total pressure. The observed decay rates of CH₃OCH₂ radicals were consistent with the literature value of k₂ = 1.6 × 10¹³exp(−12800/T)s⁻¹. The results are discussed in the context of dimethyl ether as an alternative diesel fuel. © 1997 John Wiley & Sons, Inc.     

Electronic structure and normal vibrations of CH3(OCH2CH2)nOCH3-M+-CF3SO3- (n = 2-4, M = Li, Na, and K)

Electronic structure and the vibrational frequencies of CH(3)(OCH(2)CH(2))(n)OCH(3)-M(+)-CF(3)SO(3)(-) (n = 2-4, M = Li, Na, and K) complexes have been derived from ab initio Hartree-Fock calculations. The metal ion shows varying coordination from 5 to 7 in these complexes. In tetraglyme-lithium triflate, Li(+) binds to one of the oxygens of CF(3)SO(3)(-) (triflate or Tf(-)) unlike for potassium or sodium ions, which possess bidentate coordination. Structures of glyme-MTf complexes thus derived agree well with those determined from X-ray diffraction experiments. The metal ion binds more strongly to ether oxygens of tetraglyme than its di- or triglyme analogues and engenders contraction of SO (for oxygens binding to metal ion) bonds with consequent frequency upshift for the corresponding vibration in the complex relative to those in the free MTf ion pairs. Complexation of the diglyme with LiTf engenders the largest downshift (91 cm(-1)) for the SO(2) stretching vibration of the free anion, which suggests stronger binding of lithium to the diglyme than the tri- (79 cm(-1)) or tetraglyme (70 cm(-1)). A frequency shift in the opposite direction for the SO (where oxygens do not coordinate to the metal) and CF(3) stretchings, which stems from the ion-polymer and anion-ion interactions, has been noticed. These frequency shifts have been analyzed using natural bond orbital analysis and difference electron density maps coupled with molecular electron density topography.     

Gas-phase structure, rotational barrier, and vibrational properties of methyl methanethiosulfonate, CH3SO2SCH3: an experimental and computational study

The molecular structure of methyl methanethiosulfonate, CH3SO2SCH3, has been determined in the gas phase from electron-diffraction data supplemented by ab initio (HF, MP2) and density functional theory (DFT) calculations using 6-31G(d), 6-311++G(d,p), and 6-311G(3df,3pd) basis sets. Both experimental and theoretical data indicate that although both anti and gauche conformers are possible by rotating about the S-S bond, the preferred conformation is gauche. The barrier to internal rotation in the CSSC skeleton has been calculated using the RHF/6-31G(d), MP2/6-31G(d), and B3LYP/6-31G(d) methods as well as MP2 with a 6-31G(3df) basis set on sulfur and 6-31G(d) on C, H, and O. A 6-fold decomposition of the rotational barrier has been performed in terms of a Fourier-type expansion, enabling us to analyze the nature of the potential function, showing that the coefficients V1 and V2 are the dominant terms; V1 is associated with nonbonding interactions, and V2 is associated with hyperconjugative interactions. A natural bond orbital analysis showed that the lone pair --> sigma* hyperconjugative interactions favor the gauche conformation. Furthermore, the infrared spectra for the liquid and solid phases and the Raman spectrum for the liquid have been recorded, and the observed bands have been assigned to the vibrational normal modes. The experimental vibrational data, along with calculated theoretical force constants, were used to define a scaled quantum mechanical force field for the target system that enabled us to estimate the measured frequencies with a final root-mean-square deviation of 6 cm-1.     

Synthesis and spectroscopy of N3P3X5OCH=CH2 (X = Cl, F, OCH3, OCH2CF3, N(CH3)2) and N3P3X4(OCH=CH2)2 (X = Cl, N(CH3)2). Correlations of ultraviolet photoelectron spectroscopy and nuclear magnetic resonance data to electronic and geometrical structure

The syntheses of the vinyloxycyclotriphosphazene derivatives N3P3X5OCH=CH2 (X = OMe, OCH2CF3) and the N3P3(NMe2)4(OCH=CH2)2 isomeric mixture along with improved preparations of N3P3X5OCH=CH2 (X = F, NMe2) are reported. The interactions between the vinyloxy function and the cyclophosphazene in these and the previously reported N3P3Cl5 (OCH=CH2) and N3P3F6-n(OCH=CH2)n (n = 1-4) have been examined by ultraviolet photoelectron spectroscopy (UPS) and NMR spectroscopy. The UPS data for the chloro and fluoro derivatives show a strong electron-withdrawing effect of the phosphazene on the olefin that is mediated with decreasing halogen substitution. The 1H and 13C NMR data for N3P3X5OCH=CH2 (X = F, Cl, OMe, OCH2CF3, NMe2) show significant changes as a function of the phosphazene substituent. There is a linear correlation between the beta-carbon chemical shift on the vinyloxy unit and the phosphorus chemical shift at the vinyloxyphosphorus centers. The chemical shifts of the different phosphorus centers on each ring are also related in a linear fashion. These relationships may be understood in terms of the relative electron donor-acceptor abilities of the substituents on the phosphazene ring. The 1H NMR spectra of the N3P3(NMe2)4(OCH-CH2)2 isomeric mixture allow for assignment of the relative amounts of cis and trans isomers. A model for the observed cis preference in the formation of N3P3Cl4(OCH=CH)2 is presented.     

Methanesulfonates of high-valent metals: syntheses and structural features of MoO2(CH3SO3)2, UO2(CH3SO3)2, ReO3(CH3SO3), VO(CH3SO3)2, and V2O3(CH3SO3)4 and their thermal decomposition under N2 and O2 atmosphere

Oxide methanesulfonates of Mo, U, Re, and V have been prepared by reaction of MoO(3), UO(2)(CH(3)COO)(2)·2H(2)O, Re(2)O(7)(H(2)O)(2), and V(2)O(5) with CH(3)SO(3)H or mixtures thereof with its anhydride. These compounds are the first examples of solvent-free oxide methanesulfonates of these elements. MoO(2)(CH(3)SO(3))(2) (Pbca, a=1487.05(4), b=752.55(2), c=1549.61(5) pm, V=1.73414(9) nm(3), Z=8) contains [MoO(2)] moieties connected by [CH(3)SO(3)] ions to form layers parallel to (100). UO(2)(CH(3)SO(3))(2) (P2(1)/c, a=1320.4(1), b=1014.41(6), c=1533.7(1) pm, β=112.80(1)°, V=1.8937(3) nm(3), Z=8) consists of linear UO(2)(2+) ions coordinated by five [CH(3)SO(3)] ions, forming a layer structure. VO(CH(3)SO(3))(2) (P2(1)/c, a=1136.5(1), b=869.87(7), c=915.5(1) pm, β=113.66(1)°, V=0.8290(2) nm(3), Z=4) contains [VO] units connected by methanesulfonate anions to form corrugated layers parallel to (100). In ReO(3)(CH(3)SO(3)) (P1, a=574.0(1), b=1279.6(3), c=1641.9(3) pm, α=102.08(2), β=96.11(2), γ=99.04(2)°, V=1.1523(4) nm(3), Z=8) a chain structure exhibiting infinite O-[ReO(2)]-O-[ReO(2)]-O chains is formed. Each [ReO(2)]-O-[ReO(2)] unit is coordinated by two bidentate [CH(3)SO(3)] ions. V(2)O(3)(CH(3)SO(3))(4) (I2/a, a=1645.2(3), b=583.1(1), c=1670.2(3) pm, β=102.58(3), V=1.5637(5) pm(3), Z=4) adopts a chain structure, too, but contains discrete [VO]-O-[VO] moieties, each coordinated by two bidentate [CH(3)SO(3)] ligands. Additional methanesulfonate ions connect the [V(2)O(3)] groups along [001]. Thermal decomposition of the compounds was monitored under N(2) and O(2) atmosphere by thermogravimetric/differential thermal analysis and XRD measurements. Under N(2) the decomposition proceeds with reduction of the metal leading to the oxides MoO(2), U(3)O(7), V(4)O(7), and VO(2); for MoO(2)(CH(3)SO(3))(2), a small amount of MoS(2) is formed. If the thermal decomposition is carried out in a atmosphere of O(2) the oxides MoO(3) and V(2)O(5) are formed.     

Shock tube investigation of CH3 + CH3OCH3

The title reaction has been investigated in a diaphragmless shock tube by laser schlieren densitometry over the temperature range 1163-1629 K and pressures of 60, 120, and 240 Torr. Methyl radicals were produced by dissociation of 2,3-butanedione in the presence of an excess of dimethyl ether. Rate coefficients for CH(3) + CH(3)OCH(3) were obtained from simulations of the experimental data yielding the following expression which is valid over the range 1100-1700 K: k = (10.19 ± 3.0)T(3.78)?exp((-4878/T)) cm(3) mol(-1)s(-1). The experimental results are in good agreement with estimates by Curran and co-workers [Fischer, S. L.; Dryer, F. L.; Curran, H. J. Int. J. Chem. Kinet.2000, 32 (12), 713-740. Curran, H. J.; Fischer, S. L.; Dryer, F. L. Int. J. Chem. Kinet.2000, 32 (12), 741-759] but about a factor of 2.6 lower than those of Zhao et al. [Zhao, Z.; Chaos, M.; Kazakov, A.; Dryer, F. L. Int. J. Chem. Kinet.2008, 40 (1), 1-18].     

Theoretical investigations on structure, electrostatics potentials and vibrational frequencies of Li+ - CH3- O- (CH2- CH2- O)n- CH3 (n=3-7) conformers

Electronic structure, charge distributions and vibrational characteristics of CH₃ O(CH₂ CH₂ O) _n CH₃ (n=3-7) have been derived using the ab initio Hartree Fock and density functional calculations. For tri- to hexaglymes the lowest energy conformers have trans- conformation around the C-C and C-O bonds of the backbone. For heptaglyme (n=7 in the series), however, gauche-conformation around the C-C bonds renders more stability to the conformer and turns out to be 10.1 kJ mol ⁻¹ lower in energy relative to the conformer having trans-orientation around the C-C and C-O bonds. The molecular electrostatic potential topographical investigations reveal deeper minima for the ether oxygen in conformers having the gauche conformation around the C-C bonds over those for the trans- conformers. A change from trans- to gauche-conformation around the C-C bonds of the lowest energy conformer of heptaglyme engenders a triplet of intense bands ∼1,150 cm ⁻¹ in the vibrational spectra. Theoretical calculations predict that Li ⁺ binds strongly to the heptaglyme conformer in the above series. The frequency shifts in the vibrational spectra of CH₃O(CH₂CH₂O) _n CH₃- Li⁺ (n=3-7) conformers have been discussed     

Stable conformations of CH3CH2OCH2CH2OH: A comparison of theoretical methods

This article presents the results of an extensive examination of the stable conformations of CH₃CH₂OCH₂CH₂OH at various levels of theory. In particular, 41 initial conformations are optimized using the MM2 force field in BIGSTRN-3; the MINDO/3, MNDO, and AM1 Hamiltonians in AMPAC 2.2; the PM3 Hamiltonian in MOPAC 7.0; and at the HF/STO-3G and HF/3-21G levels using Gaussian 92. The optimized HF/3-21G structures are reoptimized at the HF/6-31G(d) level, and the unique structures are optimized again at the MP2 = FULL/6-31G(d) level. In addition, single-point MP2/6-31G(d) calculations are performed using the HF/6-31G(d) geometries. The goal is to determine the relative accuracy of each method and discuss their strengths and weaknesses. © 1994 by John Wiley & Sons, Inc.     

Theoretical investigation on stability and isomerizations of CH3SO isomers

The stability and isomerizations of CH3SO isomers have been investigated at B3LYP/6-311G(d,p), MP2/6-311G(d,p), QCISD/6-311G(d,p), and CCSD(T)/6-311G(d,p) levels. Geometries of isomers and transition states (TS) have been optimized at the B3LYP/6-311G(d, p) level. Vibration analysis and the intrinsic reaction coordinate (IRC) calculated at the same level have been applied to validate the connection of the stationary points. The four different methods give similar results: 11 isomers and 9 isomerization channels were found. CH3SO and CH2(S)OH are the most stable species among the 11 isomers. Furthermore, the breakage and formation of the chemical bonds in isomerization reactions have been discussed by the topological analysis method of electronic density. The "energy transition state (ETS)" and the "structure transition state (STS)" of all the isomerizations have been found. The topological analysis shows that the relative positions of ETS and STS are determined by reaction energy. The nonplanar four-member ring structure transition state (STS), which was first found in this paper, extended the concept of ring STS.     

Theoretical study of the structure and unimolecular decomposition pathways of ethyloxonium, [CH3CH2OH2]+

Ab initio molecular orbital calculations with split-valence plus polarization basis sets and incorporating valence-electron correlation have been performed to determine the equilibrium structure of ethyloxonium ([CH₃CH₂OH₂]⁺) and examine its modes of unimolecular dissociation. An asymmetric structure (1) is predicted to be the most stable form of ethyloxonium, but a second conformational isomer of C_s symmetry lies only 1.4 kJ mol^?1 higher in energy than 1. Four unimolecular decomposition pathways for 1 have been examined involving loss of H₂, CH₄, H₂O or C₂H₄. The most stable fragmentation products, lying 65 kJ mol^?1 above 1, are associated with the H₂ elimination reaction. However, large barriers of 257 and 223 kJ mol^?1 have to be surmounted for H₂ and CH₄ loss, respectively. On the other hand, elimination of either C₂H₄ or H₂O from ethyloxonium can proceed without a barrier to the reverse associations and, with total endothermicities of 130 and 160 kJ mol^?1, respectively, these reactions are expected to dominate at lower energies. A second important equilibrium structure on the surface is a hydrogen-bridged complex, lying 53 kJ mol^?1 above 1. This complex is involved in the C₂H₄ elimination reaction, acts as an intermediate in the proton-transfer reaction connecting [C₂H₅]⁺ +H₂O and C₂H₄ + [H₃O]⁺ and plays an important role in the isotopic scrambling that has been observed experimentally in the elimination of either H₂O or C₂H₄ from ethyloxonium. The proton affinity of ethanol was calculated as 799 kJ mol^?1, in close agreement with the experimental value of 794 kJ mol^?1.     

Theoretical investigation of the stability,equilibrium geometry,and electronic structure of the (CH3)2SiH+ and+CH2CH3SiH2 cations

Institute of Chemistry of Silicates, Russian Academy of Sciences. Translated from Zhurnal Strukturnoi Khimii, Vol. 33, No. 1, pp. 156–159, January–February, 1992.     

Infrared absorption of CH3SO2 observed upon irradiation of a p-H2 matrix containing CH3I and SO2

Irradiation with a mercury lamp at 254 nm of a p-H(2) matrix containing CH(3)I and SO(2) at 3.3 K, followed by annealing of the matrix, produced prominent features at 633.8, 917.5, 1071.1 (1072.2), 1272.5 (1273.0, 1273.6), and 1416.0 cm(-1), attributable to ν(11) (C-S stretching), ν(10) (CH(3) wagging), ν(8) (SO(2) symmetric stretching), ν(7) (SO(2) antisymmetric stretching), and ν(4) (CH(2) scissoring) modes of methylsulfonyl radical (CH(3)SO(2)), respectively; lines listed in parentheses are weaker lines likely associated with species in a different matrix environment. Further irradiation at 365 nm diminishes these features and produced SO(2) and CH(3). Additional features at 1150.1 and 1353.1 (1352.7) cm(-1) are tentatively assigned to the SO(2) symmetric and antisymmetric stretching modes of ISO(2). These assignments are based on comparison of observed vibrational wavenumbers and (18)O- and (34)S-isotopic shifts with those predicted with the B3P86 method. Our results agree with the previous report of transient IR absorption bands of gaseous CH(3)SO(2) at 1280 and 1076 cm(-1). These results demonstrate that the cage effect of solid p-H(2) is diminished so that CH(3) radicals, produced via UV photodissociation of CH(3)I in situ, might react with SO(2) to form CH(3)SO(2) during irradiation and upon annealing. Observation of CH(3)SO(2) but not CH(3)OSO is consistent with the theoretical predictions that only the former reactions proceed via a barrierless path.     

Theoretical Studies on Reaction Mechanism of CH3SO with NO

The potential energy surface （PES） of CH3SO radical with NO reaction has been studied at MP2/6-311G（2df, p） and QCISD/6-311G（2df, p） levels. Geometries of the reactants, transition states （TS） and products were optimized at B3LYP/6-311G （d,p） level. The geometries of the transition states were found for the first time. The calculated results show that the reaction can proceed via singlet-state or triplet-state PES. Because of the high energy barrier of triplet surface, the singlet surface reactions are dominant. The topological analysis of electron density shows that there are two kinds of structaral transition states （the bifurcation-type ring structure transition state and the T-shaped conflict structure transition state） in the titled reaction. The total electronic density of the reactants, TS and products and the spin electronic density on the triplet surface were also discussed in this paper.     

Gas phase structure and vibrational spectra of dimethoxysulfane (CH3O)2S

The vapor phase structure of (CH₃O)₂S [1] has been investigated by electron diffraction and ab initio MO calculations, which both result in a C₂ symmetry for the most stable geometry, the C_s conformer being less stable by about 12 kJ/mol. The torsional barrier for rotation about one SO bond was calculated as 37 kJ/mol (trans barrier). The geometrical parameters (electron diffraction) of the C₂ conformer are: d_SO = 162.5(2), d_CO = 142.6(3), d_CH = 110.5(7) pm angles OSO = 103(1)°, SOC = 115.9(4)°, HCH = 109(1)°, torsional angle COSO = 84(3)°. Geometrical data calculated with 6-31G^* basis set agree well with the diffraction data; calculated dipole moments 1.1 D (C₂) and 3.3 D (C_s). The infrared spectrum of gaseous (CH₃O)₂S and the Raman spectra of liquid and solid (CH₃O)₂S are reported and have been almost fully assigned to the 27 fundamental vibrations.     

Infrared spectrum of the CH3OCH2 radical in solid argon

The methoxymethyl radical, CH(3)OCH(2), is prepared via hydrogen photodissociation from dimethyl ether during codeposition of CH(3)OCH(3) in excess argon at 4 K with laser-excited metal plume radiation. The spectrum of this radical is characterized by four infrared absorptions at 1468.1, 1253.9, 1226.6, and 944.4 cm(-1), which are assigned by deuterium substitution as well as frequency and intensity calculations using density functional theory. The O-CH(2) bond length is calculated to be 0.07 ? shorter than the CH(3)-O bond due to additional π bonding interactions. In the matrix near-UV irradiation destroys the CH(3)OCH(2) radical with the formation of HCO radical and CH(4), which is different from the decomposition mechanism of CH(3)OCH(2) radical to H(2)CO and CH(3) radical proposed for the gas phase process.