Methane dehydrogenation on Rh@Cu(111): a first-principles study of a model catalyst

The issue of tuning the relative height of the first two dehydrogenation barriers of methane (CH(4) --> CH(3) + H and CH(3) --> CH(2) + H) is addressed using density-functional theory. It is shown that the combination of a very active reaction center-such as Rh-with a more inert substrate-such as Cu(111)-may hinder the second dehydrogenation step with respect to the first, thus resulting in the reverse of the natural order of the two barriers' heights.     

Methane oxidation mechanism on Pt(111): a cluster model DFT study

The electronic energy barriers of surface reactions pertaining to the mechanism of the electrooxidation of methane on Pt (111) were estimated with density functional theory calculations on a 10-atom Pt cluster, using both the B3LYP and PW91 functionals. Optimizations of initial and transition states were performed for elementary steps that involve the conversion of CH(4) to adsorbed CO at the Pt/vacuum interface. As a first approximation we do not include electrolyte effects in our model. The reactions include the dissociative chemisorption of CH(4) on Pt, dehydrogenation reactions of adsorbed intermediates (*CH(x) --> *CH(x-1) + *H and *CH(x)O --> *CH(x-1)O + *H), and oxygenation reactions of adsorbed CH(x) species (*CH(x) + *OH --> *CH(x)OH). Many pathways were investigated and it was found that the main reaction pathway is CH(4) --> *CH(3) --> *CH(2) --> *CH --> *CHOH --> *CHO --> *CO. Frequency analysis and transition-state theory were employed to show that the methane chemisorption elementary step is rate-limiting in the above mechanism. This conclusion is in agreement with published experimental electrochemical studies of methane oxidation on platinum catalysts that have shown the absence of an organic adlayer at electrode potentials that allow the oxidation of adsorbed CO. The mechanism of the electrooxidation of methane on Pt is discussed.     

CO2 reforming of CH4 on Ni(111): a density functional theory calculation

CO(2) reforming of CH(4) on Ni(111) was investigated by using density functional theory. On the basis of thermodynamic analyses, the first step is CH(4) sequential dissociation into surface CH (CH(4) --> CH(3) --> CH(2) --> CH) and hydrogen, and CO(2) dissociation into surface CO and O (CO(2) --> CO + O). The second step is CH oxygenation into CHO (CH + O --> CHO), which is more favored than dissociation into C and hydrogen (CH --> C + H). The third step is the dissociation of CHO into surface CO and H (CHO --> CO + H). This can explain the enhanced selectivity toward the formation of CO and H(2) on Ni catalysts. It is found that surface carbon formation by the Bouduard back reaction (2CO = C((ads)) + CO(2)) is more favored than by CH(4) sequential dehydrogenation. The major problem of CO(2) reforming of CH(4) is the very strong CO adsorption on Ni(111), which results in the accumulation of CO on the surface and hinders the subsequent reactions and promotes carbon deposition. Therefore, promoting CO desorption should maintain the reactivity and stability of Ni catalysts. The computed energy barriers of the most favorable elementary reaction identify the CH(4) activation into CH(3) and H as the rate-determining step of CO(2) reforming of CH(4) on Ni(111), in agreement with the isotopic experimental results.     

General rules for predicting where a catalytic reaction should occur on metal surfaces: a density functional theory study of C-H and C-O bond breaking/making on flat,stepped, and kinked metal surfaces

To predict where a catalytic reaction should occur is a fundamental issue scientifically. Technologically, it is also important because it can facilitate the catalyst's design. However, to date, the understanding of this issue is rather limited. In this work, two types of reactions, CH(4) <--> CH(3) + H and CO <--> C + O on two transition metal surfaces, were chosen as model systems aiming to address in general where a catalytic reaction should occur. The dissociations of CH(4) --> CH(3) + H and CO --> C + O and their reverse reactions on flat, stepped, and kinked Rh and Pd surfaces were studied in detail. We find the following: First, for the CH(4) <--> Ch(3) + H reaction, the dissociation barrier is reduced by approximately 0.3 eV on steps and kinks as compared to that on flat surfaces. On the other hand, there is essentially no difference in barrier for the association reaction of CH(3) + H on the flat surfaces and the defects. Second, for the CO <--> C + O reaction, the dissociation barrier decreases dramatically (more than 0.8 eV on Rh and Pd) on steps and kinks as compared to that on flat surfaces. In contrast to the CH(3) + H reaction, the C + O association reaction also preferentially occurs on steps and kinks. We also present a detailed analysis of the reaction barriers in which each barrier is decomposed quantitatively into a local electronic effect and a geometrical effect. Our DFT calculations show that surface defects such as steps and kinks can largely facilitate bond breaking, while whether the surface defects could promote bond formation depends on the individual reaction as well as the particular metal. The physical origin of these trends is identified and discussed. On the basis of our results, we arrive at some simple rules with respect to where a reaction should occur: (i) defects such as steps are always favored for dissociation reactions as compared to flat surfaces; and (ii) the reaction site of the association reactions is largely related to the magnitude of the bonding competition effect, which is determined by the reactant and metal valency. Reactions with high valency reactants are more likely to occur on defects (more structure-sensitive), as compared to reactions with low valency reactants. Moreover, the reactions on late transition metals are more likely to proceed on defects than those on the early transition metals.     

Ion/molecule reactions in the orifice-skimmer region of an atmospheric pressure Penning ionization mass spectrometer

Atmospheric pressure Penning ionization mass spectra of methanol were measured as functions of Ar or He gas pressure in the first vacuum chamber, the position of the skimmer, and the voltage applied between the orifice and the skimmer. When the orifice and the skimmer were coaxial with a distance of 4 mm, the distribution of CH3OH2+(CH3OH)n clusters was only weakly dependent on both Ar pressure (in the range of 19-220 Pa) and orifice-skimmer voltage (in the range of 1-45 V). The ion/molecule reaction CH3OH2+ + CH3OH --> CH3+(CH3OH) + H2O was observed in the free jet expansion, especially at high orifice-skimmer voltage values. When the orifice and the skimmer were off-centered and the distance between them was increased to 18 mm, the formation of large CH3OH2+(CH3OH)n clusters, as well as their dissociation, were seen. The endothermic proton transfer reaction, CH3+(CH3OH) + CH3OH --> CH3OH2+ + CH3OCH3, occurred at high orifice-skimmer voltage. The collision-induced dissociation of cluster ions by He gas in the first vacuum chamber was much more efficient than by Ar. These results demonstrated that the mass spectra are highly dependent on skimmer position and on orifice-skimmer voltage and that ions observed by mass spectrometry do not necessarily reflect the abundance of ions produced in the atmospheric pressure ion source.     

Photodissociation dynamics of pyrimidine

Photodissociation of pyrimidine at 193 and 248 nm was investigated separately using vacuum ultraviolet photoionization at 118.4 and 88.6 nm and multimass ion imaging techniques. Six dissociation channels were observed at 193 nm, including C4N2H4 --> C4N2H3 + H and five ring opening dissociation channels, C4N2H4 --> C3NH3 + HCN, C4N2H4 --> 2C2NH2, C4N2H4 --> CH3N + C3NH, C4N2H4 --> C4NH2 + NH2, and C4N2H4 --> CH2N + C3NH2. Only the first four channels were observed at 248 nm. Photofragment translational energy distributions and dissociation rates indicate that dissociation occurs in the ground electronic state after internal conversion at both wavelengths. The dissociation rates were found to be >5 x 10(7) and 1 x 10(6) s(-1) at 193 and 248 nm, respectively. Comparison with the potential energies from ab initio calculations have been made.     

Potential energy surface for activation of methane by Pt(+): a combined guided ion beam and DFT study

A guided-ion beam tandem mass spectrometer is used to study the reactions of Pt(+) with methane, PtCH(2)(+) with H(2) and D(2), and collision-induced dissociation of PtCH(4)(+) and PtCH(2)(+) with Xe. These studies experimentally probe the potential energy surface for the activation of methane by Pt(+). For the reaction of Pt(+) with methane, dehydrogenation to form PtCH(2)(+) + H(2) is exothermic, efficient, and the only process observed at low energies. PtH(+), formed in a simple C-H bond cleavage, dominates the product spectrum at high energies. The observation of a PtH(2)(+) product provides evidence that methane activation proceeds via a (H)(2)PtCH(2)(+) intermediate. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies in eV (kJ/mol) of D(0)(Pt(+)-H) = 2.81 +/- 0.05 (271 +/- 5), D(0)(Pt(+)-2H) = 6.00 +/- 0.12 (579 +/- 12), D(0)(Pt(+)-C) = 5.43 +/- 0.05 (524 +/- 5), D(0)(Pt(+)-CH) = 5.56 +/- 0.10 (536 +/- 10), and D(0)(Pt(+)-CH(3)) = 2.67 +/- 0.08 (258 +/- 8). D(0)(Pt(+)-CH(2)) = 4.80 +/- 0.03 eV (463 +/- 3 kJ/mol) is determined by measuring the forward and reverse reaction rates for Pt(+) + CH(4) right harpoon over left harpoon PtCH(2)(+) + H(2) at thermal energy. We find extensive hydrogen scrambling in the reaction of PtCH(2)(+) with D(2). Collision-induced dissociation (CID) of PtCH(4)(+), identified as the H-Pt(+)-CH(3) intermediate, with Xe reveals a bond energy of 1.77 +/- 0.08 eV (171 +/- 8 kJ/mol) relative to Pt(+) + CH(4). The experimental thermochemistry is favorably compared with density functional theory calculations (B3LYP using several basis sets), which also establish the electronic structures of these species and provide insight into the reaction mechanism. Results for the reaction of Pt(+) with methane are compared with those for the analogous palladium system and the differences in reactivity and mechanism are discussed.     

Methane activation on Pt and Pt4: a density functional theory study

The activation mechanisms of a methane molecule on a Pt atom (CH4-Pt) and on a Pt tetramer (CH4-Pt4) were investigated using density functional theory (B3LYP and PW91) calculations. The results from these two functionals are different mostly in predicting the reaction barrier, in particular for the CH4-Pt system. A new lower energy pathway was identified for the CH4 dehydrogenation on a Pt atom. In the new pathway, the PtCH2 + H2 products were formed via a transition state, in which the Pt atom forms a complex with carbene and both dissociated hydrogen atoms. We report here the first theoretical study of methane activation on a Pt4 cluster. Among the five single steps toward dehydrogenation, our results show that the rate-limiting step is the third step, that is, breaking the second C-H bond, which requires overcoming an energy barrier of 28 kcal/mol. On the other hand, the cleavage of the first C-H bond, that is, the first reaction step, requires overcoming an energy barrier of 4 kcal/mol.     

Photodissociation and photoisomerization of alpha-fluorotoluene and 4-fluorotoluene in a molecular beam

The photodissociation of jet-cooled alpha-fluorotoluene and 4-fluorotoluene at 193 and 248 nm was studied using vacuum ultraviolet (vuv) photoionization/multimass ion imaging techniques as well as electron impact ionization/photofragment translational spectroscopy. Four dissociation channels were observed for alpha-fluorotoluene at both 193 and 248 nm, including two major channels C6H5CH2F-->C6H5CH2 (or C7H7)+F and C6H5CH2F-->C6H5CH (or C7H6)+HF and two minor channels C6H5CH2F-->C6H5CHF+H and C6H5CH2F-->C6H5+CH2F. The vuv wavelength dependence of the C7H7 fragment photoionization spectra indicates that at least part of the F atom elimination channel results from the isomerization of alpha-fluorotoluene to a seven-membered ring prior to dissociation. Dissociation channels of 4-fluorotoluene at 193 nm include two major channels C6H4FCH3-->C6H4FCH2+H and C6H4FCH3-->C6H4F+CH3 and two minor channels C6H4FCH3-->C6H5CH2 (or C7H7)+F and C6H4FCH3-->C6H5CH (or C7H6)+HF. The dissociation rates for alpha-fluorotoluene at 193 and 248 nm are 3.3 x 10(7) and 5.6 x 10(5) s(-1), respectively. The dissociation rate for 4-fluorotoluene at 193 nm is 1.0 x 10(6) s(-1). An ab initio calculation demonstrates that the barrier height for isomerization from alpha-fluorotoluene to a seven-membered ring isomer is much lower than that from 4-fluorotoluene to a seven-membered ring isomer. The experimental observed differences of dissociation rates and relative branching ratios between alpha-fluorotoluene and 4-fluorotoluene may be explained by the differences in the six-membered ring to seven-membered ring isomerization barrier heights, F atom elimination threshold, and HF elimination threshold between alpha-fluorotoluene and 4-fluorotoluene.     

Photodissociation dynamics of vinyl fluoride (CH2CHF) at 157 and 193 nm: Distributions of kinetic energy and branching ratios

Using photofragment translational spectroscopy and tunable vacuum-ultraviolet ionization, we measured the time-of-flight spectra of fragments upon photodissociation of vinyl fluoride (CH2CHF) at 157 and 193 nm. Four primary dissociation pathways--elimination of atomic F, atomic H, molecular HF, and molecular H2--are identified at 157 nm. Dissociation to C2H3 + F is first observed in the present work. Decomposition of internally hot C2H3 and C2H2F occurs spontaneously. The barrier heights of CH2CH --> CHCH + H and cis-CHCHF --> CHCH + F are evaluated to be 40+/-2 and 44+/-2 kcal mol(-1), respectively. The photoionization yield spectra indicate that the C2H3 and C2H2F radicals have ionization energies of 8.4+/-0.1 and 8.8+/-0.1 eV, respectively. Universal detection of photoproducts allowed us to determine the total branching ratios, distributions of kinetic energy, average kinetic energies, and fractions of translational energy release for all dissociation pathways of vinyl fluoride. In contrast, on optical excitation at 193 nm the C2H2 + HF channel dominates whereas the C2H3 + F channel is inactive. This reaction C2H3F --> C2H2 + HF occurs on the ground surface of potential energy after excitation at both wavelengths of 193 and 157 nm, indicating that internal conversion from the photoexcited state to the electronic ground state of vinyl fluoride is efficient. We computed the electronic energies of products and the ionization energies of fluorovinyl radicals.     

Ni/Al2O3催化剂上甲烷部分氧化制合成气反应机理

用变应答／质谱在线检测技术研究了Ｎｉ／Ａｌ２Ｏ３催化剂上甲烷部分氧化制合成气的反应要理，研究结果指出，在常压９７３Ｋ条件下，Ｎｉ／Ａｌ２Ｏ３催化剂上甲烷部分氧化制合成气按直接氧化机理进行，Ｈ２和Ｃ烛甲烷部分氧化的一次产物，其主要反应可表示如下：１．ＣＨ４＋ｘＮｉ－ＮｉｘＣ＋２Ｈ２，２．Ｏ２＋２Ｎｉ－２ＮｉＯ，３．ＮｉｘＣ＋ＮｉＯ－ＣＯ＋（ｘ＋１）Ｎｉ。     

Mutual sensitization of the oxidation of nitric oxide and a natural gas blend in a JSR at elevated pressure: experimental and detailed kinetic modeling study

The mutual sensitization of the oxidation of NO and a natural gas blend (methane-ethane 10:1) was studied experimentally in a fused silica jet-stirred reactor operating at 10 atm, over the temperature range 800-1160 K, from fuel-lean to fuel-rich conditions. Sonic quartz probe sampling followed by on-line FTIR analyses and off-line GC-TCD/FID analyses were used to measure the concentration profiles of the reactants, the stable intermediates, and the final products. A detailed chemical kinetic modeling of the present experiments was performed yielding an overall good agreement between the present data and this modeling. According to the proposed kinetic scheme, the mutual sensitization of the oxidation of this natural gas blend and NO proceeds through the NO to NO2 conversion by HO2, CH3O2, and C2H5O2. The detailed kinetic modeling showed that the conversion of NO to NO2 by CH3O2 and C2H5O2 is more important at low temperatures (ca. 820 K) than at higher temperatures where the reaction of NO with HO2 controls the NO to NO2 conversion. The production of OH resulting from the oxidation of NO by HO2, and the production of alkoxy radicals via RO2 + NO reactions promotes the oxidation of the fuel. A simplified reaction scheme was delineated: NO + HO2 --> NO2 + OH followed by OH + CH4 --> CH3 + H2O and OH + C2H6 --> C2H5 + H2O. At low-temperature, the reaction also proceeds via CH3 + O2 (+ M) --> CH3O2 (+ M); CH3O2 + NO --> CH3O + NO2 and C2H5 + O2 --> C2H5O2; C2H5O2 + NO --> C2H5O + NO2. At higher temperature, methoxy radicals are produced via the following mechanism: CH3 + NO2 --> CH3O + NO. The further reactions CH3O --> CH2O + H; CH2O + OH --> HCO + H2O; HCO + O2 --> HO2 + CO; and H + O2 + M --> HO2 + M complete the sequence. The proposed model indicates that the well-recognized difference of reactivity between methane and a natural gas blend is significantly reduced by addition of NO. The kinetic analyses indicate that in the NO-seeded conditions, the main production of OH proceeds via the same route, NO + HO2 --> NO2 + OH. Therefore, a significant reduction of the impact of the fuel composition on the kinetics of oxidation occurs.     

Theoretical study of the reaction mechanism of HCN+ and CH4 of relevance to Titan's ion chemistry

Titan is the largest satellite of Saturn. In its atmosphere, CH4 is the most abundant neutral after nitrogen. In this paper, the complex doublet potential-energy surface related to the reaction between HCN+ and CH4 is investigated at the B3LYP/6-311G(d,p), CCSD(T)/6-311G++(3df,2pd)(single-point), and QCISD/6-311G(d,p) computational levels. A total of seven products are located on the PES. The initial association of HCN+ with CH4 is found to be a prereaction complex 1 (HCNHCH3(+)) without barrier. Starting from 1, the most feasible pathway is the direct H-abstraction process (the internal C-H bond dissociation) leading to the product P1 (HCNH++CH3). By C-C addition, prereaction complex 1 can form intermediate 2 (HNCHCH3(+)) and then lead to the product P2 (CH3CNH++H). The rate-controlling step of this process is only 25.6 kcal/mol. It makes the Path P2 (1) R --> 1 --> TS1/2 --> 2 --> TS2/P2 --> P2 another possible way for the reaction. P3 (HCNCH3(+) + H), P5 (cNCHCH2(+) + H2), and P6 (NCCH3(+) + H2) are exothermic products, but they have higher barriers (more than 40.0 kcal/mol); P4 (H + HCN + CH3(+)) and P7 (H + H2 + HCCNH+) are endothermic products. They should be discovered under different experimental or interstellar conditions. The present study may be helpful for investigating the analogous ion-molecule reaction in Titan's atmosphere.     

Photodissociation of S atom containing amino acid chromophores

Photodissociation of 3-(methylthio)propylamine and cysteamine, the chromophores of S atom containing amino acid methionine and cysteine, respectively, was studied separately in a molecular beam at 193 nm using multimass ion imaging techniques. Four dissociation channels were observed for 3-(methylthio)propylamine, including (1) CH(3)SCH(2)CH(2)CH(2)NH(2)-->CH(3)SCH(2)CH(2)CH(2)NH+H, (2) CH(3)SCH(2)CH(2)CH(2)NH(2)-->CH(3)+SCH(2)CH(2)CH(2)NH(2), (3) CH(3)SCH(2)CH(2)CH(2)NH(2)-->CH(3)S+CH(2)CH(2)CH(2)NH(2), and (4) CH(3)SCH(2)CH(2)CH(2)NH(2)-->CH(3)SCH(2)+CH(2)CH(2)NH(2). Two dissociation channels were observed from cysteamine, including (5) HSCH(2)CH(2)NH(2)-->HS+CH(2)CH(2)NH(2) and (6) HSCH(2)CH(2)NH(2)-->HSCH(2)+CH(2)NH(2). The photofragment translational energy distributions suggest that reaction (1) and parts of the reactions (2), (3), (5) occur on the repulsive excited states. However, reaction (4), (6) occur only after the internal conversion to the electronic ground state. Since the dissociation from an excited state with a repulsive potential energy surface is very fast, it would not be quenched completely even in the condensed phase. Our results indicate that reactions following dissociation may play an important role in the UV photochemistry of S atom containing amino acid chromophores in the condensed phase. A comparison with the potential energy surface from ab initio calculations and branching ratios from RRKM calculations was made.     

Kinetics of the reaction of methyl radical with hydroxyl radical and methanol decomposition

The CH3 + OH bimolecular reaction and the dissociation of methanol are studied theoretically at conditions relevant to combustion chemistry. Kinetics for the CH3 + OH barrierless association reaction and for the H + CH2OH and H + CH3O product channels are determined in the high-pressure limit using variable reaction coordinate transition state theory and multireference electronic structure calculations to evaluate the fragment interaction energies. The CH3 + OH --> 3CH2 + H2O abstraction reaction and the H2 + HCOH and H2 + H2CO product channels feature localized dynamical bottlenecks and are treated using variational transition state theory and QCISD(T) energies extrapolated to the complete basis set limit. The 1CH2 + H2O product channel has two dynamical regimes, featuring both an inner saddle point and an outer barrierless region, and it is shown that a microcanonical two-state model is necessary to properly describe the association rate for this reaction over a broad temperature range. Experimental channel energies for the methanol system are reevaluated using the Active Thermochemical Tables (ATcT) approach. Pressure dependent, phenomenological rate coefficients for the CH3 + OH bimolecular reaction and for methanol decomposition are determined via master equation simulations. The predicted results agree well with experimental results, including those from a companion high-temperature shock tube determination for the decomposition of methanol.     

Theoretical study of the dynamics of the H+CH4 and H+C2H6 reactions using a specific-reaction-parameter semiempirical Hamiltonian

We present a theoretical study of the reactions of hydrogen atoms with methane and ethane molecules and isotopomers. High-accuracy electronic-structure calculations have been carried out to characterize representative regions of the potential-energy surface (PES) of various reaction pathways, including H abstraction and H exchange. These ab initio calculations have been subsequently employed to derive an improved set of parameters for the modified symmetrically-orthogonalized intermediate neglect of differential overlap (MSINDO) semiempirical Hamiltonian, which are specific to the H+alkane family of reactions. The specific-reaction-parameter (SRP) Hamiltonian has then been used to perform a quasiclassical-trajectory study of both the H+CH4 and H+C2H6 reactions. The calculated values of dynamics properties of the H+CH4-->H2+CH3 reaction and isotopologues, including alkyl product speed distributions, diatomic product internal-state distributions, and cross sections, are generally in good agreement with experiment and with the results provided by the ZBB3 PES [Z. Xie et al., J. Chem. Phys. 125, 133120 (2006)]. The results of trajectories propagated with the SRP Hamiltonian for the H+C2H6-->H2+C2H5 reaction also agree with experiment. The level of agreement between the results calculated with the SRP Hamiltonian and experiment in both the H+methane and H+ethane reactions indicates that semiempirical Hamiltonians can be improved for not only a specific reaction but also a family of reactions.     

Photoinduced adsorption of hydrogen and methane on gamma-alumina. the photoinduced chesorluminescence (PhICL) effect

Adsorption of hydrogen and methane on a preirradiated surface of gamma-Al2O3 produces an afterglow, which has been described as a photoinduced chesorluminescence (PhICL), whose spectral features identify with the intrinsic photoluminescence of alumina. The emission spectrum consists of at least four overlapping single emission bands. For methane adsorption, the PhICL phenomenon is seen only if the solid is preirradiated in the presence of oxygen. Emission decay kinetics of the PhICL effect for gamma-Al2O3 reveal two wavelength regimes: a short wavelength regime at lambda = 300-370 nm (decay time tau = 1.1 +/- 0.2 s; signal width = 2.8 s), and a longer wavelength regime at lambda = 380-700 nm (decay time tau = 2.1 +/- 0.1 s; signal width = 4.3 s). A model is proposed in which there exist two different emission centers and, thus, two different pathways for emission decay. In the first, emission originates with electron trapping by such deep energy traps as anion vacancies {e- + Va --> F+ + hv1} to yield electron F-type color centers, whereas in the second, emission originates from electron/trapped hole recombination {e- + Os*- --> Os2- + hv2}. The first common step of the pathways is homolytic dissociative chemisorption of hydrogen and methane upon interaction with surface-active hole centers Os*-, produced upon preirradiation of alumina, to give atomic hydrogen H* and methyl radicals CH3*. Thermoprogrammed desorption spectra of photoadsorbed or postsorbed oxygen show that adsorbed oxygen interacts with atomic hydrogen and methyl radicals. The products of thermodesorption were H2O for hydrogen and H2O, CO2, and CH3CH3 for methane. The Solonitsyn memory effect coefficient was also evaluated for oxygen photoadsorption.     

CH4 dissociation on Co（0001）: A density functional theory study

CH4 dissociation on Co(0001) surfaces is an important step, which has been investigated at the level of density functional theory. It is found that CH4 is unfavorable to adsorb on Co(0001), while CH4 favores to dissociate to CH3, CH2 and CH on Co(0001) surface by sequential dehydrogenation. In the whole process of CH4 dehydrogenation, CH4 dissociate to CH3 and H is the rate-determining step. The calculated results show that CH2 and CH exist mainly on Co(0001) surface, while the dehydrogenation of CH into C and H is difficult.     

Applied reaction dynamics: efficient synthesis gas production via single collision partial oxidation of methane to CO on Rh111

Supersonic molecular beams have been used to determine the yield of CO from the partial oxidation of CH4 on a Rh111 catalytic substrate, CH4+12O2-->CO+2H2, as a function of beam kinetic energy. These experiments were done under ultrahigh vacuum conditions with concurrent molecular beams of O2 and CH4, ensuring that there was only a single collision for the CH4 to react with the surface. The fraction of CH4 converted is strongly dependent on the normal component of the incident beam's translational energy, and approaches unity for energies greater than approximately 1.3 eV. Comparison with a simplified model of the methane-Rh111 reactive potential gives insight into the barrier for methane dissociation. These results demonstrate the efficient conversion of methane to synthesis gas, CO+2H2, are of interest in hydrogen generation, and have the optimal stoichiometry for subsequent utilization in synthetic fuel production (Fischer-Tropsch or methanol synthesis). Moreover, under the reaction conditions explored, no CO2 was detected, i.e., the reaction proceeded with the production of very little, if any, unwanted greenhouse gas by-products. These findings demonstrate the efficacy of overcoming the limitations of purely thermal reaction mechanisms by coupling nonthermal mechanistic steps, leading to efficient C-H bond activation with subsequent thermal heterogeneous reactions.