The thermochemistry of carbonyl complexes of Cr,Mo and W with pyridine and acetonitrile

Microcalorimetric measurements at elevated temperatures of the heats of thermal decomposition and of iodination of a number of [M(CO)_nL_6-n] complexes (M = Cr, Mo, W; n = 3, 4; L = py, MeCN) have led to values for the standard enthalpies of formation of the following crystalline compounds (values given in kJ mol^?) at 25°C: fac-[Mo(CO)₃py₃](275 ± 12), fac-[Mo(CO)₃(NCCH₃)₃]  (410 ± 12), fac-[W(CO)₃py₃](250 ± 12), fac-[W(CO)₃(NCCH₃)₃](405 ± 12) and cis-[Cr(CO)₄py₂](505 ± 20). From these and other data, including estimated heats of sublimation, the bond enthalpy contributions of the various metalligand bonds in the gaseous metal complexes were evaluated as follows (values in kJ mol^?): D(Crpy) 102, D(Mopy) 146, DWPy) 173, D(Mo7z.sbnd;NCMe) 135 and D(WNCMe) 169. For a given metal the bond enthalpy contribution decreased in the order D(MCO) > D(Mpy) > D(Mz.sbnd;NCMe). This order is related to the σ- and π-bonding character of the ligand.     

Synthesis,structural studies and biological activity of dioxomolybdenum(VI), dioxotungsten(VI), thorium(IV) and dioxouranium(VI) complexes with 2-hydroxy-5-methyl and 2-hydroxy-5-chloroacetophenone benzoylhydrazone

New complexes of MoO₂(VI), WO₂(VI), Th(IV) and UO₂(VI) with aroyl hydrazones have been prepared and characterized by various physicochemical methods. Elemental analysis suggested 1 : 1 metal : ligand stoichiometry for MoO₂(VI), WO₂(VI), and UO₂(VI) complexes whereas 1 : 2 for Th(VI) complexes. The physicochemical studies showed that MoO₂(VI), Th(IV) and UO₂(VI) complexes are octahedral. The electrical conductivity of these complexes lies in the range 1.00 × 10⁻⁷−3.37 × 10⁻¹¹Ω⁻¹ cm⁻¹ at 373 K. The complexes were found to be quite stable and decomposition of the complexes ended with respective metal oxide as a final product. The thermal dehydration and decomposition of these complexes were studied kinetically using both Coats-Redfern and Horowitz-Metzger methods. It was found that the thermal decomposition of the complexes follow first order kinetics. The thermodynamic parameters of the decomposition are also reported. The biological activities of ligands and their metal complexes were tested against various microorganisms.     

Hydrothermal synthesis and crystal structure of two new modified polyoxometalates based on {PMo8V6O42} clusters

Two new polyoxometalate-based compounds, [{P^VMo ₅ ^VI Mo ₃ ^V V ₄ ^V V ₂ ^IV O₄₂}{Co^II(H₂O)(2,2′-bpy)₂}₂][Co^II(2,2′-bpy)₃]₂{P^VMo ₇ ^VI Mo^VV ₆ ^V O₄₂} · 6H₂O (2,2′-bpy = 2,2′-bipyridine) (1) and [{P^VMo ₆ ^VI Mo ₂ ^V V ₃ ^V V ₃ ^IV O₄₂}{Cu^II(2,2′-bpy)}{Cu^II(2,2′-bpy)₂}₂] · 3.5H₂O (2), were hydrothermally prepared and structurally characterized by elemental analysis, IR, TG and single crystal X-ray diffraction. The structural determination result shows that compound (1) contains two types of polyoxoanions coexisting with transition metal complex counter-cations in a single phase. In the structure of compound (2), a chain-like structure forms by means of the interconnection of the disordered transition metal-complex fragments decorated on the trisupporting polyoxoanions. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.     

Crystal structure of trans-pyH[MoBr4py2] and reactivity of Trans-pyH[MBr4py2] (M = Mo,W; py = pyridine) towards nitrogen ligands and bromine Oxidation

The crystal structure of trans-pyH[MoBr₄py₂] has been determined: orthorhombic, Pnma (No. 62), a = 16.197(3), b = 13.995(3), c = 8.615(1) Å, Z = 4, D_c = 2.23, D_o = 2.20(3) g/cm³, V = 1 953(1) ų. R₁, R_w = 0.057 and 0.053. Trans-[MoBr₄py₂]^? anions with staggered conformation of pyridine rings are located on the mirror planes. Mo? Br, Mo? N(pyridine) distances are 2.593(1), 2.573(1), 2.227(8) and 2.213(7) Å. Cations are located on the symmetry centers. The cation in trans-pyH[MBr₄py₂] can be replaced. Trans-NH₄[MBr₄py₂] · H₂O, Cs[MBr₄py₂], LH[MBr₄py₂] (M = Mo, W; L = 4-methylpyridine, 4-pic; 2,2′-bipyridyl, bipy) were prepared. The compounds of molybdenum and tungsten with the same chemical composition are isostructural. All compounds react with pyridine and 4-methylpyridine. The products are trans-MBr₃L₃, and in the case of molybdenum, also trans-MoBr₃py₂(4-pic). Bromine oxidizes trans-M^I[MBr₄py₂] to trans-MBr₄py₂.     

Metal chelates in adsorption polarography I: Mo(VI) and derivatives of oxine

The formation of complexes between Mo(VI) and 8-hydroxy-quinoline (oxine) and four oxine derivatives were investigated by multiwavelength molecular absorption spectrometry, potentiometry, and polarography. The following pK_OH- and pK_NH- values of the ligands and logK ₂₁₁-values of the complexes MoO₂(OH)₂L ^x– (x=1 or 2) were obtained at 25° C and an ionic strength of 1M(NaClO₄): 5,7-dinitro8-hydroxyquinoline 4.59, <0, 14.50; 7-nitro-8-hydroxyquinoline-5-sulfonic acid 5.34, 0.41, 15.70; 7-iodo-8-hydroxyquinoline-5-sulfonic acid 6.98, 2.62, 17.65; 8-hydroxyquinoline-5-sulfonic acid 8.33, 4.13, 18.71; and 8-hydroxyquinoline 9.62, 5.28, 19.69. A good linearity was found between logK ₂₁₁ and the sum of the pK-values of the OH- and NH⁺-groups. The dependence of the peak current of Mo(VI)-determinations by adsorption polarography of the 7-nitro-8-hydroxyquinoline-5-sulfonate complex of Mo(VI) MoO(OH)₃L^– can quantitatively be described at pH 0.8–2 using the corresponding pK-values and the log K₃₁₁ of 18.54±0.03, determined by polarography.     

X-Ray Diffraction and Raman Spectroscopic Study of Bis-(Pyridine Base) Complexes of Cadmium(II) Halogenides

Summary.  The molecular structures of bis-(pyridine base) complexes of cadmium(II) chloride and bromide, where the pyridine base is pyridine ( py), 3-methylpyridine (3-Me-py), 4-methylpyridine (4-Me-py), and 4-ethylpyridine (4-Et-py), were investigated by means of single-crystal X-ray diffraction and Raman spectroscopy. The crystal structures of CdCl₂ py ₂ (1), CdCl₂(3-Me-py)₂ (2), and CdCl₂(4-Me-py)₂ (3) were determined. All crystals are monoclinic; 1: a = 17.784(2), b = 8.666(1), c = 3.8252(7) ?, β = 91.54(1)°, space group: P2₁/n; 2: a = 11.89(1), b = 14.41(1), c = 3.874(6) ?, β = 92.3(1)°, space group: P2₁/a; 3: a = 21.091(2), b = 3.8884(5), c = 18.2317(3) ?, β = 113.64(1)°, space group: C2/c. The structures were refined to R/R _w values (%) of 3.2/5.5, 3.0/5.0, and 3.4/5.1 for 1–3. All cadmium atoms are octahedrally coordinated with the chloride ions forming infinite di-μ-chloro polymeric linear chains and the nitrogen atoms of the pyridine base in trans configuration. The Cd chains are oriented along the c-axis in 1 and 2 and along the b-axis in 3. The crystal structures indicate the absence of a peculiar interaction between the polymeric chains. The Raman spectra of eight complexes were measured in the range of 550–50 cm⁻¹, and the Raman peaks originating from cadmium-halogen vibrations were assigned. The Raman spectra of 1 and 2 are quite alike in the lattice mode vibration region. The resemblance of the cadmium-halogen vibration peaks indicates the same halogenide ion bridged octahedral structure for all complexes. Received March 27, 2001. Accepted (revised) June 19, 2001     

Oxomolybdenum(VI) and (IV) complexes of pyrazole derived ONO donor ligands – synthesis,crystal structure studies and spectroelectrochemical correlation

Four cis-dioxomolybdenum complexes of general formula [MoO₂(Lⁿ)EtOH] (n = 1–4) and one oxomolybdenum(IV) complex [MoO(L⁴)EtOH], with potentially tridentate Schiff bases derived from 5-methyl pyrazole-3-carbohydrazide and salicylaldehyde/substituted salicylaldehyde/o-hydroxy acetophenone have been prepared. The Mo(IV) complex is derived from the Mo(VI) dioxo complex by oxotransfer reaction with PPh₃. The complexes are characterized by elemental analysis, electronic spectra, IR, ¹H NMR, and by cyclic voltammetry. All the Mo(VI) species are crystallographically characterized. The complexes have a distorted octahedral structure in which the ligand behaves as a binegative donor one, leaving the pyrazole –N uncoordinated towards the metal center. It is also revealed from the crystal structure that the Mo(VI) center enjoys an NO₅ donor environment.     

Catalytic Spectrophotometric Determination of Molybdenum

Summary.  A highly selective, sensitive, and simple catalytic method for the determination of molybdenum in natural and waste waters was developed. It is based on the catalytic effect of Mo(VI) on the oxidation of 2-aminophenol with H₂O₂. The reaction is monitored spectrophotometrically by tracing the oxidation product at 430 nm after 10 min of mixing the reagents. Addition of 800 μg · cm⁻³ EDTA conferred high selectivity; however, interfering effects of Au(III), Cr(III), Cr(VI), and Fe(III) had to be eliminated by a reduction and co-precipitation procedure with SnCl₂ and Al(OH)₃. Mo(VI) shows a linear calibration graph up to 11.0 ng · cm⁻³; the detection limit, based on the 3S _b-criterion, is 0.10 ng · cm⁻³. The unique selectivity and sensitivity of the new method allowed its direct application to the determination of Mo(VI) in natural and waste waters. Received April 11, 2001. Accepted (revised) June 18, 2001     

Synthesis,spectroscopic and X-ray crystallographic properties of manganese compounds of keto- and enol-coordinated di-2-pyridyl ketone benzoyl hydrazone (dpkbh). Reactions of [Mn(CO)5Br] with dpkbh

Reactions between [Mn(CO)₅Br] and dpkbh in low boiling solvents in air gave fac-[Mn^I(CO)₃(κ²-N_py,N_im-dpkbh)Br]·H₂O, [Mn^IIBr₂(κ³-N_py,N_im,O-dpkbh)], and [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂]·0.5H₂O (N_im = imine nitrogen and N_py = pyridyl nitrogen). Crystallization of fac-[Mn^I(CO)₃(κ²-N_py,N_im-dpkbh)Br]·H₂O from dmso or CH₃CN produced dark red crystals of [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂]·nX (X = dmso, n = 1 and X = H₂O, n = 0.22). This is in contrast to the reaction of [Re(CO)₅Cl] with dpkbh in refluxing toluene to form fac-[Re^I(CO)₃(κ²-,N_py,N_py-dpkbh)Cl] which can be crystallized from CH₃CN, dmso or dmf to form fac-[Re^I(CO)₃(κ²-,N_py,N_py-dpkbh)Cl]·nX (X = CH₃CN, n = 0 and solvate = dmso or dmf, n = 1). Infrared spectral measurements are consistent with keto coordination of dpkbh to Mn(I) in fac-[Mn^I(CO)₃(κ²-N_py,N_im-dpkbh)Br]·H₂O and Mn(II) in [Mn^IIBr₂(κ³-N_py,N_im,O-dpkbh)] plus enol coordination of the amide-deprotonated dpkbh, to the Mn(II) center in [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂]·0.5H₂O. Electronic absorption spectral measurements in non-aqueous solvents indicate sensitivity of fac-[Mn^I(CO)₃(κ²-N_py,N_im-dpkbh)Br]·H₂O and [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂]·0.5H₂O to changes in their outer-shell environments. X-ray crystallographic analyses elucidated the identities of [Mn^IIBr₂(κ³-N_py,N_im,O-dpkbh)] and [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂]·nX and divulged weaker coordination of [dpkbh] to Mn(II) in [Mn^IIBr₂(κ³-N_py,N_im,O-dpkbh)] and stronger coordination of [dpkbh-H]^? to Mn(II) in [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂]·0.22H₂O. Low-temperature X-ray structural analyses were employed to account for the disorder in the structure of [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂] and the short NH bond distance observed in the structure of [Mn^IIBr₂(κ³-N_py,N_im,O-dpkbh)]. A PLATON Squeeze treatment was invoked to account for the fractional occupancy of lattice water in the structure of [Mn^II(κ³-N_py,N_im,O-dpkbh-H)₂].     

Kinetics of Complexation of Uranium with 2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino) Phenol (Br-PADAP) in a 1:1 Water-Ethanol Medium

2-(5-Bromo-2-pyridylazo)-5-(diethylamino) phenol (Br-PADAP) forms a 1:1 complex with the uranyl ion in the presence of sulphosalicylic acid, which acts as stabilizer for this complex in the triethanol amine/perchloric acid buffer system. A change in the stoichiometry of the complex was seen at pH<5. Kinetic measurements were carried out using stopped-flow spectrophotometer in the presence of an excess concentration of U(VI) in the pH range 6.5 to 8. The dependence of the pseudo-first-order rate constant, k(obs), on the concentrations of U(VI), ligand and hydrogen ion showed that Br-PADAP reacts with UO₂(OH)⁺ to form an intermediate species (equilibrium constant = 1.28×10⁴mol.dm⁻³) that then rearranges (rate constant = 5.6×10⁻²s⁻¹) to form the product species. UO₂(OH)⁺ is present in equilibrium with the unreactive species UO₂(OH)₂, as well as with the unreactive sulfosalicylic acid complex.     

The application of the spectroelectrochemical method in the studies of molybdenum,tungsten, and uranium in chloride melts

The behavior of molybdenum(III), tungsten(IV), and uranium(VI) ions in NaCl-2CsCl-eutectic-mixture-based melt at 550°C is studied by spectroelectrochemical method. Anodic oxidation of MoCl₆³⁻ and WCl₆²⁻ yields melt-soluble chloride compounds MoCl₆²⁻ and WCl₆⁻ respectively. It is shown that the electrochemical recharging in the Mo(III)/Mo(IV) system is reversible; the formal standard potential E*_{Mo(IV)/Mo(III)}and the Gibbs energy $ \Delta G_{MoCl_4 (melt)}^* $ \Delta G_{MoCl_4 (melt)}^* are evaluated. The cathodic reduction of U(VI) yields U(V) ions. The cathodic reduction of W(IV) ion does not yield melt-soluble tungsten compounds of lower oxidation state.     

Triangular ruthenium acetate clusters containing the bis(pyridyl)propane ligand and their inclusion chemistry with β-cyclodextrin

The triruthenium carboxylate cluster [Ru₃O(OAc)₆(py)₂(bpp)]⁺ (OAc = acetate) containing the bridging 1,3-bis(4-pyridyl)propane (bpp) ligand, and its dimeric species [{Ru₃O(OAc)₆(py₂)}₂(μ-bpp)]²⁺ were synthesized in order to investigate their inclusion compounds with β-cyclodextrin (β-CD). Characterization of the complexes was carried out based on spectroscopic, electrochemical and spectroelectrochemical techniques, while the formation of inclusion complexes was evaluated using ¹H NMR/NOESY spectroscopy. Since bpp is a flexible ligand, a DFT study was carried out in order to characterize its conformational isomers and their possible role in the host–guest chemistry with β-CD. Instead of observing the formation of inclusion compounds with different stoichiometries, we observed the formation of 1:1 bpp/β-CD compounds in which the bpp ligand assumes different conformations. The assembly of polymetallic rotaxane species was successfully demonstrated by monitoring the ¹H NMR spectra of the monomeric cluster species in the presence of aquapentacyanoferrate(II) ions and β-CD.     

Electrochemistry and electrocatalytic activity of polypyrrole/ferrocyanide films on a glassy carbon electrode

Functionalized polypyrrole films were prepared by incorporation of Fe(CN)₆ ³⁻ as doping anion during the electropolymerization of pyrrole at a glassy carbon electrode from aqueous solution. The electrochemical behavior of the Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry. An obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole film with ferrocyanide incorporated was demonstrated by oxidation of ascorbic acid at the optimized pH of 4 in a glycine buffer. The catalytic effect for mediated oxidation of ascorbic acid was 300 mV and the bimolecular rate constant determined for surface coverage of 4.5 × 10⁻⁸ M cm⁻² using rotating disk electrode voltammetry was 86 M⁻¹ s⁻¹. Furthermore, the catalytic oxidation current was linearly dependent on ascorbic acid concentration in the range 5 × 10⁻⁴–1.6 × 10⁻² M with a correlation coefficient of 0.996. The plot of i _p versus v ^1/2 confirms the diffusion nature of the peak current i _p. Received: 12 April 1999 / Accepted: 25 May 1999     

Possibility of Mo<Subscript>2</Subscript>O<Subscript>6</Subscript> formation at high temperatures in the range of pressures from 1 to 1 × 10<Superscript>−5</Superscript> bar

Gibbs free energy minimization was used to consider the formation of complex molybdenum oxide (Mo₂O₆) at 2400 K in the range of pressures from 1 to 1 to 1 × 10⁻⁵ bar for the basic component ratio Mo: O₂ = 1: 1. Several ways are shown to lead to Mo₂O₆ formation: when P = 1 bar, a synthesis reaction involving simple molybdenum oxides (MoO, MoO₂, MoO₃) is the main way; when P = 1 × 10⁻³ bar or lower, reactions of (MoO₃) _n (n = 3−5) complex oxides with metallic molybdenum and molybdenum monoxide (MoO) are.     

Photometric determination of aqueous cobalt (II), nickel (II), copper (II) and iron (III) with 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt in gelatin films

Photometric determination of aqueous Co(II), Cu(II), Ni(II) and Fe(III) was performed using indicator films prepared by immobilization of 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt (NRS) into hardened photographic film. Immobilization was based on electrostatic interaction of reagent and metal complexes with the gelatin. The isoelectric point pH of hardened gelatin (4.46±0.04) was evaluated by viscometry. Co(II), Fe(III), Ni(II) form 1:3 complexes with NRS in gelatin at pH 2 and Cu(II) forms 1:2 complexes. Their log β′ values were: Co-6.7, Fe-8.6, Cu-8.0, and Ni-6.4. The absorption maxima were: 370nm for NRS, and 430nm, 470nm, 495nm and 720nm for complexes of Co(II), Ni(II), Cu(II) and Fe(III). An algorithm for their simultaneous determination using the indicator films was developed. The detection limits were: c_lim(Co²⁺) = 0.45×10⁻⁵ M, c_lim(Fe³⁺) = 0.50×10⁻⁵ M, c_lim(Cu²⁺) = 0.67×10⁻⁵ M, c_lim(Ni²⁺) = 0.75×10⁻⁵ M,; and their sum c_lim(ΣMn⁺) = 0.82×10⁻⁵ M.      

Mechanism of activation of glassy carbon electrodes by cathodic pretreatment

The performance of carbon electrodes depends on the surface pretreatment methods. An exclusively cathodically pretreated glassy carbon electrode (GCE) shows very good activity towards monomeric molybdate(VI) ion adsorption and its reduction. X-ray photoelectron spectroscopy studies reveal the creation of >C–O– surface groups on cathodisation. A strong interaction between the Mo(VI) ion and these >C–O– surface groups with the formation of Mo(V) is responsible for the activation of the cathodically pretreated GCE surface. Received: 5 January 1998 / Accepted: 10 January 1999     

Einführung eines terminalen Halogenoliganden in diorgano-verbrücke Dirhenium- und Molybdän-Rhenium-Komplexanionen in Gegenwart eines Amidinkations

Insertion of a Terminal Halogeno Ligand into Diorgano-bridged Dirhenium and Rhenium-Molybdenum Complex Anions in the Presence of an Amidin Cation and the Isomerization Processes The equimolar reaction of in situ generated anion Anions Re₂(μ-PCy₂)(CO)₈^? (Re? Re) in the presence of a steric expansive amidine cation DBUH⁺ with bromine and iodine in tetrahydrofuran solution gave the two isomers Re₂(PCy₂)(CO)₈X (Re? Re) and Re₂(μ-PCy₂)(μ-X)(CO)₈ (X = Br, I), of which the isomer with a terminal X ligand as major product was formed under maintenance of the Re? Re bond. The monotropic isomerization process of Re₂(μ-PCy₂)(CO)₈I runs thermically relative slowly, but more rapid in photochemical and electrochemical processes. The analogeous reaction of the heterometallic anion ReMo(η⁵-C₅H₅)(μ-PPh₂)(CO)₆^? with iodine delivers opposite to the former reaction mainly the bridged isomer ReMo(η⁵-C₅H₅)(μ-PPh₂μ-I)(CO)₆ besides ReMo(η⁵-C₅H₅)(μ-PPh₂)(CO)₆I. The obtained complexes were characterized by means of v(CO) and ³¹P NMR spectroscopic measurements. Single-crystal analyses led to the subsequent metal—metal bond lengths: Re? Re of 308.0(1) pm in Re₂(μ-PCy₂)(CO)₈Br and Re? Mo of 313.6(1) pm in ReMo(η⁵-C₅H₅)(μ-PPh₂)(CO)₆I.     

Synthesis of cis-Tetrabromobispyridinemolybdates(III) and the crystal structure of cis-(NH4)[MoBr4py2] · ⅓3 H2O (py = pyridine)

The reaction between (NH₄)[MoBr₅ · H₂O] and pyridine in acetonitrile (CH₃CN) at room temperature results in the mixture of cis- and trans-(pyH)[MoBr₄py₂] which can be separated on the basis of solubility. cis-M[MoBr₄py₂] · ? H₂O (M = NH₄⁺, Rb⁺, Cs⁺), cis-(bipyH)[MoBr₄py₂] (bipy = 2,2′-bipyridil) and cis-(PPh₄)[MoBr₄py₂], were prepared from cis-(pyH)[MoBr₄py₂]. At the temperature of boiling acetonitrile irreversible cis to trans isomerisation takes place. Bromine oxydizes cis isomers at room temperature to trans-MoBr₄py₂. The compounds were characterised by chemical analysis, infrared, UV-VIS spectroscopy, conductivity measurements and powder diffraction. The crystal structure of cis-(NH₄)[MoBr₄py₂] · ? H₂O has been determined: rhombohedral, R3c, (No. 161), a = 15.809(3) Å, β = 112.79(2)°, Z = 6, D_C = 2.29, D_O = 2.27(3) g/cm³, V = 2 601(1) ų, R₁ = 0.046, R_w = 0.068. Average Mo? Br and Mo? N(pyridine) distances within the anion are 2.58(2) and 2.20(2) Å. cis-Rb[MoBr₄py₂] · ? H₂O and cis-Cs[MoBr₄py₂] · ? H₂O are isostructural with cis-(NH₄)[MoBr₄py₂] · ? H₂O.     

[CpR(OC)Mo(μ‐η2:2‐P2)2FeCpR′] als Edukt für heterobimetallische Zweikerncluster mit P2‐ und CnRnP4‐n‐Liganden (n = 1, 2)

[Cp^R(OC)Mo(μ‐η^2:2‐P₂)₂FeCp^R′] as Educt for Heterobimetallic Dinuclear Clusters with P₂ and C_nR_nP_4‐n Ligands (n = 1, 2) The cothermolysis of [Cp^R(OC)Mo(μ‐η^2:2‐P₂)₂FeCp^R′] ( 1 ) and tBuC≡P ( 2 ) as well as PhC≡CPh ( 3 ) affords the heterobimetallic triple‐decker like dinuclear clusters [(Cp'''Mo)(Cp*′Fe)(P₃CtBu)(P₂)] ( 4 ), Cp''' = C₅H₂tBu₃‐1,2,4, Cp*′ = C₅Me₄Et, and [(Cp*Mo)(Cp*Fe)(P₂C₂Ph₂)(P₂)] ( 5 ) with a bridging tri‐ and diphosphabutadiendiyl ligand. 4 and 5 have been characterized additionally by X‐ray crystallography.     

Synthesis of a trinuclear ruthenium cluster containing pyridine and 4-acetylpyridine ligands and its immobilization on functionalized silica

Summary The trinuclear cluster [Ru₃O(Ac)₆(py)₂(acpy)]PF₆ (py: pyridine;acpy: 4-acetylpyridine) has been synthesized and anchored on functionalized silica. Five successive redox couples exhibitingE°=–1.4, –0.98, 0.21, 1.23, and 2.2 Vvs. SHE have been characterized in acetonitrile solutions based on cyclic voltammetry and spectroelectrochemical measurements. The redox and spectroscopic properties are maintained in the immobilized species, allowing its use in optodes and in electron transfer processes.

---

Synthese eines dreikernigen Rutheniumclusters mit Pyridin- und 4-Acetylpyridinliganden sowie seine Fixierung auf funktionalisiertem Kieselgel

Zusammenfassung Der dreikernige Cluster [Ru₃O(Ac)₆(py)₂(acpy)]PF₆(py: Pyridin;acpy: 4-Acetylpyridin) wurde hergestellt und an funktionalisiertem Kieselgel verankert. Mit Hilfe cyclischer Voltammetrie und spektroelektrochemischer Messungen konnten fünf aufeinanderfolgende Redoxpaare beobachtet werden (E ⁰=–1.4, –0.98, 0.21, 1.23 und 2.2 V bezüglich SHE). Die elektrochemischen und spektroskopischen Eigenschaften bleiben in den fixierten Clustern erhalten und erlauben deren Verwendung in Optoden und bei Elektronenübertragungsprozessen.