Hollow microstructures of polypyrrole doped by poly(styrene sulfonic acid)

Microstructures with hollow interiors, such as microspheres, microcrocks, microbowls, and micropumpkins, were prepared through the direct electrochemical oxidation of pyrrole in an aqueous solution of poly(styrene sulfonic acid) (PSSA). Scanning electron microscopy demonstrated that the microstructures possessed hollow interiors. The addition of polymeric doping ions made the skins of the microstructures very smooth, and several novel structures were observed. The morphology of the microstructures was simply modulated through changes in the electrochemical conditions. Raman and Fourier transform infrared characterizations indicated that the microstructures were made of conductive polypyrrole (PPy) doped by polymeric anions of poly(styrene sulfonate), and X‐ray diffraction showed that the microstructures were amorphous. Thermogravimetric analysis indicated that PPy–PSSA composite films with microstructures had higher thermal stability than pure PPy, PPy‐coated PSSA microspheres, and naphthalene sulfonic acid doped PPy microstructures. Furthermore, PPy–PSSA composite films with microstructures showed cation‐exchange behavior during the redox process in aqueous solutions of sodium dodecyl benzenesulfonate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3170–3177, 2004     

Electrochemistry and electrocatalytic activity of polypyrrole/ferrocyanide films on a glassy carbon electrode

Functionalized polypyrrole films were prepared by incorporation of Fe(CN)₆ ³⁻ as doping anion during the electropolymerization of pyrrole at a glassy carbon electrode from aqueous solution. The electrochemical behavior of the Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry. An obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole film with ferrocyanide incorporated was demonstrated by oxidation of ascorbic acid at the optimized pH of 4 in a glycine buffer. The catalytic effect for mediated oxidation of ascorbic acid was 300 mV and the bimolecular rate constant determined for surface coverage of 4.5 × 10⁻⁸ M cm⁻² using rotating disk electrode voltammetry was 86 M⁻¹ s⁻¹. Furthermore, the catalytic oxidation current was linearly dependent on ascorbic acid concentration in the range 5 × 10⁻⁴–1.6 × 10⁻² M with a correlation coefficient of 0.996. The plot of i _p versus v ^1/2 confirms the diffusion nature of the peak current i _p. Received: 12 April 1999 / Accepted: 25 May 1999     

Electropolymerization of polypyrrole, modified with germanium, on a passivated titanium electrode in aqueous nitrate solution: new results on catalytic reduction of protons and dissolved oxygen

Conductive polypyrrole (PPy) films and PPy films containing Ge microparticles were synthesized by anodic oxidation of pyrrole in acidic nitrate solutions using a bare passivated titanium electrode. Well-adhering black PPy films were obtained both under galvanostatic and potentiodynamic polarization. After the formation of the PPy film, during the first anodic cycle, an increase of the anodic deposition current with the number of cycles was observed, revealing the increase of conductivity of the growing film. The variations of the electrode surface area were estimated by impedance spectroscopy measurements. The kinetics of the PPy film formation is controlled by diffusion of the Py monomer in the solution. The diffusion coefficient, estimated by two different methods, was ca. 2×10^–6 cm² s^–1. The reduction rate of oxygen and protons at the Ti/PPy/Ge electrodes depends on how the Ge microparticles are incorporated in the PPy film. Optimum conditions for this incorporation are realized with thin PPy films and high Ge loading. Thermogravimetric analysis shows that the PPy film containing Ge microparticles is more thermally stable than the blank PPy film. Electronic Publication     

Spectroelectrochemistry of conducting polypyrrole and poly(pyrrole–cyclodextrin) prepared in aqueous and nonaqueous solvents

Conducting polypyrrole (PPy) and poly(pyrrole-2,6-dimethyl-β-cyclodextrin) [poly(Py-β-DMCD)] films were prepared by electrode potential cycling on a gold electrode in aqueous and nonaqueous (acetonitrile) electrolyte solutions containing lithium perchlorate. The resulting products were characterized with cyclic voltammetry, in situ UV–Vis spectroscopy, and in situ conductivity measurements. For the electrosynthesis of poly(Py-β-DMCD), a (1:1) (mole–mole) (Py-β-DMCD) supramolecular cyclodextrin complex of pyrrole previously characterized with proton NMR spectroscopy was used as starting material. A different cyclic voltammetric behavior was observed for pyrrole and the poly(Py-β-DMCD) complex in aqueous and nonaqueous solutions during electrosynthesis. The results show that in both solutions in the presence of cyclodextrin, the oxidation potential of pyrrole monomers increases. However, the difference of oxidation potentials for films prepared in aqueous solution is larger than for the films prepared in nonaqueous solution. In situ conductivity measurements of the films show that films prepared in acetonitrile solution are more conductive than those synthesized in aqueous solutions. Maximum conductivity can be observed for PPy and poly(Py-β-DMCD) films prepared in nonaqueous solution in the range of 0.10 < E _Ag/AgCl < 0.90 V and 0.30 < E _Ag/AgCl < 0.90 V, respectively. In situ UV–Vis spectroelectrochemical data for both films prepared potentiodynamically by cycling the potentials from −0.40 < E _Ag/AgCl < 0.90 V in nonaqueous solutions are reported. This paper is dedicated to Prof. Alan Bond on the occasion of his 65th birthday in recognition of his numerous contributions toward electrochemistry.     

用磷钨杂多酸-聚吡咯-氧化铝薄膜修饰玻碳电极测定废水中的对苯二酚

利用草酸电解液一步阳极氧化法在高纯铝表面制得纳米孔阳极氧化铝(AAO)薄膜;随后通过纳米孔阳极氧化铝模板电聚合,将磷钨杂多酸(PW12)掺杂吡咯(Py)溶液修饰到玻碳电极(GCE)表面,制得高灵敏的纳米微粒修饰电极(PW12-PPy/AGCE);研究了PW12-PPy/AGCE的伏安行为,考察了其影响因素;并将该电极应用于废水中对苯二酚的测定.结果表明,所制备的PW12-PPy/AGCE可以用于测定废水中的对苯二酚.     

Preparation and characterization of wet poly(vinyl chloride)-polypyrolle composite film

Wet poly(vinyl chloride) (wPVC) coated glassy carbon (GC) electrode was prepared by casting a DMF solution of poly(vinyl chloride) on glassy carbon and immersing it in methanol, and then in water. The wPVC coated GC (wPVC/GC) electrode showed electrochemical activity in aqueous solution; therefore, it was possible to obtain a wPVC/polypyrolle (PPy) composite by electropolymerization from aqueous solution of pyrolle (Py) into the wPVC matrix on the electrode. PPy segregated in wPVC matrix and the mechanical properties of PPy was improved by forming a composite without changing the electrochemical properties of PPy. The PPy/wPVC ratio can be controlled by controlling the concentration of PVC in DMF solution.     

Semiconducting properties of polypyrrole films in aqueous solution

The influence of the nature of the anions on the conductivity of polypyrrole films in aqueous solution was investigated by photocurrent spectroscopy combined with electrochemical impedance spectroscopy in dependence on the potential. As demonstrated, the conductivity of polypyrrole films at negative potentials can vary from a semiconducting to an ionic conducting state, depending on the size of the charge-compensating counter-anion incorporated during the electropolymerization. The reduced polypyrrole shows semiconducting properties when small anions are inserted, releasing the polymer matrix during the reduction process. The polymer can than be considered as a two-layer system, consisting of a semiconducting layer and a porous layer. Measurements at different thickness of polypyrrole films have shown that the position of the semiconducting layer is in the electrode/polymer interface. The ohmic resistance of the semiconducting layer is in the range 1–5 kΩ, the capacitance approaches a value of 100–500 nF and the flatband potential is −0.62 V_SCE. If large anions are incorporated, cation insertion takes place during reduction, the electrolyte content in the polymer then is relatively high and the polymer's behaviour is similar to that of an ionic conductor. The results are presented and discussed together with the example of methylsulfonate as a relatively small anion and polystyrenesulfonate as a large anion. Received: 28 July 1998 / Accepted: 22 February 1999     

聚血红素修饰电极对儿茶酚类化合物和抗坏血酸氧化的电催化作用研究

电催化是化学修饰电极研究的中心课题之一,血红素是一种重要的铁卟啉化合物,其中的铁原子能够以两种价态存在．我们采用循环伏安法将血红素修饰于电极表面,得到了氧化还原体（ｒｅｄｏｘ）型化学修饰电极,并用于儿茶酚类化合物和抗坏血酸的电催化氧化研究．采用伏安法...     

Ceramic Carbon/Polypyrrole Materials for the Construction of Bienzymatic Amperometric Biosensor for Glucose

Amperometric enzymatic biosensors have high selectivity and simplicity in use. It has advantages over other analytical methods in biochemistry, pharmacology, so it evokes strong interests1,2. Generally, the detection mode involved in oxidase based biosensors is often based on the electrochemical detection of hydrogen peroxide directly3,4. However the direct oxidation of hydrogen peroxide requires a relative high working potential (exceeding ca. 0.6 V vs. SCE), at which many biological sub…     

导电聚合物的电化学制备和电化学性质研究——中国科学院有机固体重点实验室导电聚合物电化学研究工作简介(I)

简要介绍本研究组自上世纪80年代以来在导电聚合物的电化学制备和电化学性质研究中取得的一些主要成果,包括吡咯电化学聚合条件的影响、电化学聚合反应机理及其反应动力学、导电聚吡咯的两种掺杂结构及其两步电化学氧化还原过程和电化学过氧化的机理、导电聚苯胺的电化学性质、导电聚合物稳定性的电化学解释等等.     

Paper-like free-standing polypyrrole and polypyrrole–LiFePO4 composite films for flexible and bendable rechargeable battery

Highly flexible, paper-like, free-standing polypyrrole and polypyrrole–LiFePO₄ composite films were prepared using the electropolymerization method. The films are soft, lightweight, mechanically robust and highly electrically conductivity. The electrochemical behavior of the free-standing films was examined against lithium counter electrode. The electrochemical performance of the free-standing pure PPy electrode was improved by incorporating the most promising cathode material, LiFePO₄, into the PPy films. The cell with PPy–LiFePO₄ composite film had a higher discharge capacity beyond 50 cycles (80 mA h/g) than that of the cell with pure PPy (60 mA h/g). The free-standing films can be used as electrode materials to satisfy the new market demand for flexible and bendable batteries that are suitable for the various types of design and power needs of soft portable electronic equipment.     

Electropolymerization of iron tetra(<Emphasis Type="Italic">o</Emphasis>-aminophenyl)porphyrin from aqueous solution and the electrocatalytic behavior of modified electrode

Stable electroactive iron tetra(o-aminophenyl)porphyrin (FeTAPP) films are prepared by electropolymerization from aqueous solution by cycling the electrode potential between −0.4 and 1.0 V vs Ag/AgCl at 0.1 V s⁻¹. The cyclic voltammetric response indicates that polymerization takes place after the oxidation of amino groups, and the films could be produced on glassy carbon (GC) and gold electrodes. The film growth of poly(FeTAPP) was monitored by using cyclic voltammetry and electrochemical quartz crystal microbalance. The cyclic voltammetric features of Fe(III)/Fe(II) redox couple in the film resembles that of surface confined redox species. The electrochemical response of the modified electrode was found to be dependent on the pH of the contacting solution with a negative shift of 57 mV/pH. The electrocatalytic behavior of poly(FeTAPP) film-modified electrode was investigated towards reduction of hydrogen peroxide, molecular oxygen, and chloroacetic acids (mono-, di-, and tri-). The reduction of hydrogen peroxide, molecular oxygen, and dichloroacetic acid occurred at less negative potential on poly(FeTAPP) film compared to bare GC electrode. Particularly, the overpotential of hydrogen peroxide was reduced substantially. The O₂ reduction proceeds through direct four-electron reduction mechanism.     

抗坏血酸在PPy-HEImTfa/Pt电极上的电催化氧化及其机理

以铂为基底电极,在1-乙基咪唑三氟乙酸盐(HEImTfa)离子液体中电化学合成导电聚吡咯(PPy),制得PPy-HEImTfa/Pt电极;采用循环伏安法研究了PPy-HEImTfa/Pt电极对抗坏血酸的电催化氧化性能.结果表明:PPy-HEImTfa/Pt电极对0.1mo·lL-1抗坏血酸具有较高的电催化氧化活性,与相同条件下硫酸溶液中在铂表面修饰的聚吡咯(PPy-H2SO4/Pt)电极和裸铂电极相比,其氧化峰电位分别降低了0.10和0.19V,氧化峰电流分别增加了3.0和3.6mA.同时采用原位傅里叶变换红外(insitu FTIR)光谱技术对抗坏血酸在PPy-HEImTfa/Pt电极上的电氧化机理进行了研究,结果表明:抗坏血酸在PPy-HEImTfa/Pt电极上首先被氧化为脱氢抗坏血酸,在水溶液中脱氢抗坏血酸迅速发生水合作用形成水合脱氢抗坏血酸,它进一步水解并发生内酯开环反应生成2,3-二酮古洛糖酸;在较高电位下,部分抗坏血酸最终被氧化成CO2.     

不同状态下聚吡咯膜的电化学阻抗

用恒电流法分别聚合了掺杂对甲苯磺酸根(pTS-)和十二烷基磺酸根(DS-)的聚吡咯膜(PPy/pTS和PPy/DS),通过循环伏安法(CV)和电化学阻抗法(EIS)测试了聚吡咯膜在NaCl溶液中‘过电位’电化学过程前后及不同电位下聚吡咯膜的电化学性能.同时,通过嵌入和脱出Na+和Cl-离子的聚吡咯膜在特定溶液中电化学阻抗图谱,研究了离子的嵌入对聚吡咯膜电化学性能的影响.结果表明‘过电位’现象可以提高聚吡咯膜的离子电导率和膜电容,Cl-离子的嵌入能提高PPy/pTS的电导率,而Na+离子的嵌入对聚吡咯膜的电导率影响不大.另外,嵌入离子对聚吡咯膜形貌的改变会对聚吡咯膜的离子传导率有一定影响,从而导致膜的电化学阻抗的变化.     

Photocatalytic polypyrrole-TiO2-nanoparticles composite thin film generated at the air-water interface

Herein, we report a new method of generation of TiO(2) nanoparticles (NPs) incorporated thin films of polypyrrole (PPy) at the air-water interface. Aqueous TiO(2) NPs when treated with H(2)O(2) and left in a chamber of pyrrole vapor resulted in the formation of a film at the interface, in addition to bulk precipitate. Spectroscopic, X-ray diffraction, and electron microscopic measurements establish the formation of a thin film of PPy with the incorporation of TiO(2) NPs. The TiO(2)-containing PPy films when transferred onto glass substrates were able to photo catalyze the decomposition of aqueous organic dyes: methyl orange and methylene blue. Further, these films could also photo catalyze the oxidation of iodide to triiodide ions in aqueous potassium iodide solution. We find that the PPy-TiO(2) composite films catalyze the reactions in the presence of light more efficiently than a suspension of TiO(2) NPs.     

Nanoscale degradation of polypyrrole films under oxidative stress: An atomic force microscopy study and review

Atomic force microscopy (AFM) is employed to monitor the surface morphology of polypyrrole (PPy) films grown on vitreous carbon substrates during the catalytic reduction of Cr(VI) to Cr(III). The morphology of freshly-prepared films depends on substrate characteristics. Upon reaction, uniform nodules of aggregated PPy clusters appear. No significant differences in surface morphology are found between its oxidized and reduced forms. Loss of catalytic activity after 8-9 oxidation/reduction cycles of exposure to the chromate solution (oxidation) and electrochemical recharging of the film at negative potentials (reduction) correlates well with the observed polymer film dissolution/detachment from the carbon substrate. Formation of well-defined circular features (PPy rings) at different stages leads to a model for the film degradation process that includes formation of Cl₂ gas inside the polymer matrix. In the final stages, the bulk of the film typically fractures and detaches from the electrode. A catalytically inactive, ultrathin PPy layer remains on the substrate even after prolonged exposure to the target solution. A review of techniques for the study of PPy aging/degradation is given.     

Fabrication of gold nanoparticles/polypyrrole composite-modified electrode for sensitive hydroxylamine sensor design

A highly sensitive hydroxylamine (HA) electrochemical sensor is developed based on electrodeposition of gold nanoparticles with diameter of 8 nm on the pre-synthesized polypyrrole matrix and formed gold nanoparticles/polypyrrole (GNPs/PPy) composite on glassy carbon electrode. The electrochemical behavior and electrocatalytic activity of the composite-modified electrode are investigated. The GNPs/PPy composite exhibits a distinctly higher electrocatalytic activity for the oxidation of HA than GNPs with twofold enhancement of peak current. The enhanced electrocatalytic activity is attributed to the synergic effect of the highly dispersed gold metal particles and PPy matrix. The overall numbers of electrons involved in HA oxidation, the electron transfer coefficient, catalytic rate constant, and diffusion coefficient are investigated by chronoamperometry. The sensor presents two wide linear ranges of 4.5 × 10⁻⁷–1.2 × 10⁻³ M and 1.2 × 10⁻³–19 × 10⁻³ M with the detection limit of 4.5 × 10⁻⁸ M (s/n = 3). In addition, the proposed electrode shows excellent sensitivity, selectivity, reproducibility, and stability properties.     

A comparison of redox processes for polypyrrole/dodecylsulfate films in aqueous and non-aqueous media

Polypyrrole/dodecylsulfate (PPy/DDS) films were synthesized in aqueous and ethanolic solutions and investigated in aqueous, ethanolic, methanolic and acetonitrile solutions by cyclic voltammetry (CV). The amounts of anions and cations in the films before and after electrochemical treatment were determined by electron probe microanalysis (EPMA); the film morphology was studied by scanning electron microscopy (SEM). The results prove that the mobility of bulky DDS^– ions in PPy increases in the order: water<acetonitrile<ethanol<methanol. It was found that dopant DDS^– ions can be easily removed from PPy matrix swollen in alcohols or acetonitrile by electrochemical reduction or by soaking in electrolyte solutions of these solvents. The influence of electrochemical treatment on the change of doping level in aqueous solution is essentially less and depends on the cations in the test solution. Although the electroneutrality of PPy/DDS films during redox cycling is realized mainly by movement of the cations in aqueous solution and by movement of the anions in organic solvents, nevertheless the participation of anions in aqueous and cations in organic solvents is also established. The redox properties of PPy/DDS are more dependent on the solvent of the test solutions than of the synthesis solutions. Electronic Publication     

Metallic and non-metallic redox response of conducting polymers

The potentiometric response of electrodes coated with polypyrrole or poly(N-methylpyrrole) films with different doping anions was studied in solutions containing the redox couples: Fe(CN)₆^3−/4−, Ru(NH₃)₆^3+/2+ and Fe(Ill)/Fe(II). The stable potential measured with the electrodes was the potential of the redox couple. The response time was instant for polypyrrole doped with dodecylsulphate ions, PPy(DS) and slow for the polymers doped with mobile anions. On the basis of electrochemical measurements and chemical analysis by EDAX spectroscopy it was found that with the PPy(DS) electrode the potentiometric response was of the ‘metallic’ type, with no change in the oxidation state of the bulk polymer. With the other polymer systems studied reduction or oxidation of the polymer bulk took place when it was in contact with a redox couple in the solution.     

Preparation and Properties of Composite Polypyrrole/Pt Catalyst Systems

Three different methods for the preparation and modification of conducting polymer/noble metal catalyst systems consisting of polypyrrole (PPy) and platinum (Pt) are described for the anodic oxidation of methanol. The first method consists of the electrochemical deposition of a thin PPy film on glassy carbon substrate, which is modified with Pt either by electroreduction of hexachloroplatinate, codeposition from a nanodispersed Pt solution, or incorporation of tetrachloroplatinate as counterion followed by cathodic reduction. A second method is based on the preparation of nanoscale PPy(PSS) particles by chemical polymerization with polystyrenesulfonate PSS^– as the counterion. This material is a favorable catalyst support for nanodispersed Pt due to its mixed electronic and cationic conductivity. To study the electrochemical properties, the particulate system PPy(PSS)/Pt is fixed in a carbon fiber electrode. A third method was developed which brings the polypyrrole in close contact to a proton exchanger membrane (Nafion) using a special chemical deposition procedure. This method is useful for preparing a membrane electrode assembly (MEA) consisting of Nafion/PPy/Pt. The structural, morphological, and electrocatalytic properties for methanol oxidation were studied depending on the preparation method applied using surface analytical techniques (TEM, SEM, and EDX) and electrochemical measurements (cyclic voltammetry and transient techniques).