四氟乙烯齐聚体的反应 四氟乙烯四、五聚体和芳香胺的反应

前已报道四氟乙烯四聚体(全氟-3,4-甲基己烯-3)(1)、五聚体(全氟-3,4-二甲基-4-乙基己烯-2)(2)和脂肪烷氧以及脂肪胺的亲核反应.本文报道化合物1,2和芳香胺如苯胺、β-萘胺的反应.由于烯烃1、2双键处于分子中间,因而当亲核试剂进攻时,双键容易发生重排,生成的末端基烯烃更具反应性,故导致一取代、二取代、三取代以及环化降解等复杂产物.     

Fast choice of separation conditions for analyses by capillary zone electrophoresis using an information system Xemic

An information system Xemic applicable in analytical chemistry is described and its use in capillary electrophoresis for searching suitable separation conditions is demonstrated. This system is capable to provide suitable separation conditions even for analytes for which no electrophoretic experiments have been published so far. The system works with a database of components of anionic character the analyses of which have been performed, published in reviewed scientific journals, and included into a database created by an expert. Moreover, the system learned to search also in abstracts or complete scientific articles to find articles dealing with the determination of a substance in a given sample matrix. When no experiments have been published so far for a defined substance in a specific matrix, Xemic shows the separation conditions for determination of the substance regardless of the matrix. When no response can be found for the analyte of interest at all, the system Xemic works like an expert in the field and searches chemically similar substances and offers a series of substances the physicochemical properties of which are close to the followed analyte with respect to the behavior in the electric field, and shows working conditions for their analysis. Thus, the analyst puts only the order in the form of a given analyte in a given matrix and obtains a recommendation of a separation system that should enable to perform a successful separation. The system is not rigid and enables the operator to change the importance of individual attributes used in similarity search so as to obtain a broader or narrower group of similar components. With a certain probability the analyte of interest can be successfully analyzed under separation conditions that suited for the analysis of the most similar substances in the given matrix.     

Toward amino acid typing for proteins in FFLUX

Continuing the development of the FFLUX, a multipolar polarizable force field driven by machine learning, we present a modern approach to atom‐typing and building transferable models for predicting atomic properties in proteins. Amino acid atomic charges in a peptide chain respond to the substitution of a neighboring residue and this response can be categorized in a manner similar to atom‐typing. Using a machine learning method called kriging, we are able to build predictive models for an atom that is defined, not only by its local environment, but also by its neighboring residues, for a minimal additional computational cost. We found that prediction errors were up to 11 times lower when using a model specific to the correct group of neighboring residues, with a mean prediction of ∼0.0015 au. This finding suggests that atoms in a force field should be defined by more than just their immediate atomic neighbors. When comparing an atom in a single alanine to an analogous atom in a deca‐alanine helix, the mean difference in charge is 0.026 au. Meanwhile, the same difference between a trialanine and a deca‐alanine helix is only 0.012 au. When compared to deca‐alanine models, the transferable models are up to 20 times faster to train, and require significantly less ab initio calculation, providing a practical route to modeling large biological systems. © 2016 The Authors. Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Spreading and retraction dynamics of smectic liquid crystal domains at interfaces

The spreading of a liquid drop over liquid subphase can be driven by change in interfacial tension mediated through a surfactant, volatile solvent or photoinduced reaction. In contrast to the spreading dynamics of a liquid drop, a liquid crystal drop with anisotropic structure can lead to interesting behaviour due to its viscoelasticity and anchoring at the interfaces. Recently, we have reported studies on unusual spreading and retraction dynamics of a smectic domain doped with a fluorescent dye in the collapsed state of a Langmuir monolayer. Under epifluorescence microscope, during excitation, a stack of layers of the dye-doped smectic domain gets sheared causing the domain to spread asymmetrically. Further, due to line tension, the domain transforms into a circular shape. We also find the domain size to be about twice that of the initial size. Interestingly, in the absence of excitation, the domain retracts to a smaller area. During retraction of the domain, successive generation of edge dislocation loops arising from a nucleus results in an increase in the domain thickness. The dynamics of spreading and retraction of the domain can be understood by invoking changes in the spreading coefficient due to photoinduced modification of the interfacial tension.     

A versatile microfabricated platform for electrophoresis of double- and single-stranded DNA

We demonstrate a versatile microfabricated electrophoresis platform, incorporating arrays of integrated on-chip electrodes, heaters, and temperature sensors. This design allows a range of different sieving gels to be used within the same device to perform separations involving both single- and double-stranded DNA over distances on the order of 1 cm. We use this device to compare linear and cross-linked polyacrylamide, agarose, and thermo-reversible Pluronic-F127 gels on the basis of gel casting ease, reusability, and overall separation performance using a 100 base pair double-stranded DNA ladder as a standard sample. While cross-linked polyacrylamide matrices provide consistently high-quality separations in our system over a wide range of DNA fragment sizes, Pluronic gels also offer compelling advantages in terms of the ability to remove and reload the gel. Agarose gels offer good separation performance, however, additional care must be exercised to ensure consistent gel properties as a consequence of the need for elevated gel loading temperatures. We also demonstrate the use of denaturing cross-linked polyacrylamide gels at concentrations up to 19% to separate single-stranded DNA fragments ranging in size from 18 to 400 bases in length. Primers differing by 4 bases at a read length of 30 bases can be separated with a resolution of 0.9-1.0 in under 20 min. This level of performance is sufficient to conduct a variety of genotyping assays including the rapid detection of single nucleotide polymorphisms (SNPs) in a microfabricated platform. The ability to use a single microelectrophoresis system to satisfy a wide range of separation applications offers molecular biologists an unprecedented level of flexibility in a portable and inexpensive format.     

The potential use of continuous-flow isotope-ratio mass spectrometry as a tool in forensic soil analysis: a preliminary report

The use of continuous-flow isotope-ratio mass spectrometry (CF-IRMS) as a tool in soil analysis has been assessed as part of a larger study using a number of geological techniques applied in a forensic context. Carbon and nitrogen isotopic ratios, delta13C and delta15N, have been analysed to investigate situations which have arisen from crime casework. Three questions have been addressed: the role of spatial variation found over the short-scale (less than 20 m), temporal variation over a period of almost 2 years, and the variation found between source soils and soil transferred to footwear soles during a simple one-stage transfer process. Results are presented for the three experiments. The use of carbon and nitrogen isotopes has been shown to be useful in discriminating between soil types and sample locations, even when sampling occurs at a different time (as might be the case with a crime scene). In cases of primary transfer (from a source soil by a one-stage transfer to another surface, in this case, shoes and boots), the combination of carbon and nitrogen isotope ratios is a valuable tool in discriminating between sites and in showing the relationship of the transferred samples to the relevant source soils. Used in combination with other analytical techniques, isotopic analysis may prove to be a useful tool in a forensic context.     

Experimental study of dielectrophoresis and liquid dielectrophoresis mechanisms for particle capture in a droplet

This work presents a microfluidic system that can transport, concentrate, and capture particles in a controllable droplet. Dielectrophoresis (DEP), a phenomenon in which a force is exerted on a dielectric particle when it is subjected to a non-uniform electric field, is used to manipulate particles. Liquid dielectrophoresis (LDEP), a phenomenon in which a liquid moves toward regions of high electric field strength under a non-uniform electric field, is used to manipulate the fluid. In this study, a mechanism of droplet creation presented in a previous work that uses DEP and LDEP is improved. A driving electrode with a DEP gap is used to prevent beads from getting stuck at the interface between air and liquid, which is actuated with an AC signal of 200 V(pp) at a frequency of 100 kHz. DEP theory is used to calculate the DEP force in the liquid, and LDEP theory is used to analyze the influence of the DEP gap. The increment of the actuation voltage due to the electrode with a DEP gap is calculated. A set of microwell electrodes is used to capture a bead using DEP force, which is actuated with an AC signal of 20 V(pp) at a frequency of 5 MHz. A simulation is carried out to investigate the dimensions of the DEP gap and microwell electrodes. Experiments are performed to demonstrate the creation of a 100-nL droplet and the capture of individual 10-μm polystyrene latex beads in the droplet.     

Superiority of a new gradient system utilizing a critical threshold for the adsorption capacity of polypeptides to column packing when compared with a standard gradient system for the simultaneous and quantitative analysis of polypeptides

Compared with a standard gradient system, the new gradient system which we developed has a major advantage because it permits a wide range of acetonitrile content, e.g. more than the critical threshold, in the polypeptide solution and allows the quantitative analysis of the polypeptide with satisfactory analytical precision. Additionally, this new gradient system allows the enhancement of the sensitivity of the polypeptide analysis proportionate to the increased volume of solution loaded with the same levels of precision. In contrast, when using a standard gradient system it is difficult to analyze a polypeptide quantitatively with good precision due to either adsorption to various materials or to irregular change in the ratio between a retained and a passed peak of the polypeptide. Additionally, the appearance of a passed peak results in a loss in the sensitivity of the polypeptide analysis, although no adsorption of a polypeptide to various materials occurs in a solution with acetonitrile content more than the critical threshold. Consequently, the new gradient system is effective for the simultaneous and quantitative analysis of different polypeptides with good precision and without any loss of sensitivity due to either adsorption to various materials or the appearance of a passed peak.     

A SENSITIVE METHOD FOR DETERMINING CHLOROPHYLL b IN PLANT EXTRACTS

Abstract— A new method of using hydroxylamine as the reagent was developed to determine the concentrations of chlorophylls a and b in plant extracts accurately and sensitively. The method is based on the principle that hydroxylamine reacts in a short time with the aldehyde group of chlorophyll b in 95 per cent methanol at pH 5.8 to afford a derivative having a red band similar in position to the red band of chlorophyll a , while the spectrum of chlorophyll a is unaffected by the treatment with hydroxylamine. The method includes the measurements of absorbanlce for the mixture of a plant extract with hydroxylamine and for the reagent blank at a single wavelength, 666 mμ, and the concentrations of chlorophylls a and b are calculated from the absorbance value for the reagent blank and the increment of absorbance due to the reaction. By measuring this increment directly by difference photometry, one can determine a low concentration of chlorophyll b relative to chlorophyll a . The contents of chlorophylls in matured and etiolated leaves were determined by the method, and the errors included in this method were shown to be smaller than those in a commonly used technique including the measurements at two different wavelengths.     

Characterization of porphyrins, chlorins, and bacteriochlorins formed via allomerization of bacteriochlorophyll a. Synthesis of highly stable bacteriopurpurinimides and their metal complexes

Allomerization of bacteriochlorophyll a (Bchl a) was studied under various reaction conditions. Bchl a on stirring with KOH/propanol produced an "unstable bacteriochlorin", which decomposed in acidic conditions to give a complex mixture containing bacteriopurpurin a as a principal component. The yields of other compounds varied and were found to be dependent on reaction condition. The structures of the isolated porphyrins, chlorins, and bacteriochlorins, related to Bchl a, were assigned on the basis of 1D, 2D NMR (ROESY), and mass spectroscopy analyses. The presence of fused anhydride rings in porphyrin, chlorin, and bacterichlorin systems showed a significant influence on their optical properties. Compared to bacteriochlorophyll a and bacteriopheophytin, the related structurally modified analogues, e.g., the bacteriopurpurin a, 13(1)/15(1)-N-alkyl isoimide, and the imide analogues were found to be more stable with a significant difference in spectroscopic properties. Bacteriochlorins containing anhydride, imide, or isoimide cyclic rings demonstrated a significant bathochromic shift of their Q bands in their electronic absorption spectra. Under basic conditions the formation of the 12-hydroxymethyl, 12-formyl, and 12-methylene analogues as byproducts from the 12-methyl-bacteriopurpurin-N-hexylimide could be due to subsequent oxidation of the vinylogous enolate intermediates. To investigate the effect of the central metal in the electronic spectra, the stable bacteriopurpurin-18-N-hexylimide was converted to a series of metal complexes [Zn(II), Cd(II), and Pd(II)] by following the direct or transmetalation approaches. Compared to the free-base analogue, these complexes showed a remarkable shift in their electronic absorption spectra.     

Thermoresponsive nanostructures by self-assembly of a poly(N-isopropylacrylamide)-lipid conjugate

The synthesis and purification of a poly(N-isopropylacrylamide)-lipid conjugate and its use in the preparation of a thermoresponsive lipid mesophase is described. Specifically, poly(N-isopropylacrylamide) with a single carboxyl group at one end was activated with dicyclohexylcarbodiimide/N-hydroxysuccinimide to form an active ester. This N-hydroxysuccinimide ester was then used to form a dimyristoyl-sn-glycero-3-phosphoethanolamine conjugate with poly(N-isopropylacrylamide) via an amide bond, rendering the conjugate amphiphilic. Quaternary phases comprising the conjugate, a phosopholipid, dimyristoylphosphatidylcholine, and a cosurfactant, N,N-dimethyldodecylamine-N-oxide, dispersed in water were found to self-assemble at room temperature to form liquid crystalline gels, adopting an expanded lamellar structure. A modest increase in temperature triggered the reversible conversion of the aggregate to a collapsed lamellar structure, while a modest reduction in temperature resulted in its conversion to a nonlamellar phase. The phases were characterized by polarized optical microscopy and small-angle X-ray scattering (SAXS).     

Tracking traces of transition metals present in concrete mixtures by inductively-coupled plasma mass spectrometry studies

Transition metals can have a significant impact in research related to the dosage optimization of superplasticizers. It is known that the presence of transition metals can influence such doses, and the application of a contemporary instrumental method to obtain the profiles of subsisting transition elements in concrete mixtures would be useful. In this work, inductively-coupled plasma mass spectrometry (ICP-MS) is investigated as a possible tool to track traces of transition metals in concrete mixtures. Depth profiling using ICP-MS on proofed and unproofed concrete shows the presence of Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu and Zn at trace intensities in the bulk of the samples under investigation. The study demonstrates that the transition metals present in the concrete sample are largely a part of the cement composition and, to a minor degree, a result of exposure to the seawater after curing. The coated concrete samples have a metal distribution pattern similar to the uncoated samples, but slight differences in intensity bear testimony to the very low levels that originate from the exposure to seawater. While X-ray diffraction fails to detect these traces of metals, ICP-MS is successful in detecting ultra-trace intensities to parts per trillion. This method is not only a useful application to track traces of transition metals in concrete, but also provides information to estimate the pore size distribution in a given sample by very simple means.     

Terminal trifluoromethyl-alkoxy and-alkenyloxy nematic liquid crystals for LCDs with active matrix addressing

We have synthesized a new class of compounds suitable for LCD applications, incorporating a trifluoromethyl group in the terminal alkoxy- or alkenyloxy-chain. These compounds appear to fulfil many of the requirements for use in TN-LCDs. Core units containing a cyclohexyl ring, which tend to induce a lower viscosity than that of the analogous aromatic materials, were synthesized. Systems containing several aromatic rings were also prepared with a view to producing compounds of high birefringence. Compounds containing a lateral fluorosubstituent as well as a polar substituent in a terminal position were synthesized in order to generate a high positive value of the dielectric anisotropy. Molecules incorporating a bicyclo[2.2.2]octane ring were also synthesized in order to produce a high nematic clearing point and to influence the elastic constants. Compounds with three 1,4-disubstituted rings were synthesized with a view to producing materials with a high nematic clearing point and as low a melting point as possible. A series of compounds with a carbon-carbon double bond in the terminal chain was prepared in an attempt to produce compounds with appropriate values and ratios of the elastic constants.     

Calculation of free energy through successive umbrella sampling

We consider an implementation of umbrella sampling in which the pertinent range of states is subdivided into small windows that are sampled consecutively and linked together. This allows us to simulate without a weight function or to extrapolate the results to the neighboring window in order to estimate a weight function. Additionally, we present a detailed error analysis in which we demonstrate that the error in umbrella sampling is controlled and, in the absence of sampling difficulties, independent of the window sizes. In this case, the efficiency of our implementation is comparable to a multicanonical simulation with a very good weight function, which in our scheme does not need to be known ahead of time. The analysis also allows us to detect sampling difficulties such as correlations between adjacent windows and provides a test of equilibration. We exemplify the scheme by simulating the liquid-vapor coexistence in a Lennard-Jones system.     

Pierre Maurice Marie Duhem: A Polemical Scientist

Pierre Duhem was a multifaceted and prolific scientist active in thermodynamics, physics, history, and philosophy. His rigid and noncompromising attitude, together with deep religious feelings at a time when France was riding a very strong wave of anticlericalism, led to his being unable to teach in Paris and to academic exile in the provinces. He was a prolific writer and he left his name on many equations such as the Gibbs-Duhem and Duhem-Margules equations. We present here a general picture of his life and activities against the political climate in France as well as a discussion of some of his most important contributions to thermodynamics.     

Quantification of the effect of nonphotochemical quenching on the determination of in vivo chl a from phytoplankton along the water column of a freshwater reservoir

Nonphotochemical quenching (NPQ) is a well-known collection of different photoprotective mechanisms of plants and algae to avoid photodamage under an excess of light energy. In order to evaluate the overall effect of NPQ processes on the fluorometric determination of in vivo Chl a from a phytoplankton community dominated by diatoms, we compared the results obtained by two different fluorometric field devices with the total concentration of extracted Chl a measured by HPLC ( in vitro Chl a ). A different set of measurements were made to assess the performance of these fluorometers at high, moderate and low irradiance conditions. The Fbbe fluorometer, which is capable of distinguishing different algal groups according to their pigment content, allowed a better determination of in vivo Chl a under high irradiance conditions, with only a 10% mean difference from the in vitro Chl a concentration. In turn, the FMII fluorometer underestimated by as much as 50% the in vitro Chl a concentration under the same light conditions. As data from both fluorometers were in accordance with the in vitro Chl a values at moderate irradiance levels, the differences observed at high irradiances were attributed to the decrease in the yield of Chl a fluorescence caused by photoprotective NPQ processes. Accordingly, we estimated the effect of NPQ processes on the in vivo Chl a determination and the results allow us to provide an equation to correct this effect when in situ fluorometric measurements are carried out under high irradiance regimes. Our results demonstrate that under certain circumstances NPQ seriously compromises the results obtained by in situ fluorometric probes and highlight the need for a cautious interpretation of field data under such environmental conditions.     

Hepatocyte Targeting and Intracellular Copper Chelation by a Thiol-Containing Glycocyclopeptide

Metal overload plays an important role in several diseases or intoxications, like in Wilson's disease, a major genetic disorder of copper metabolism in humans. To efficiently and selectively decrease copper concentration in the liver that is highly damaged, chelators should be targeted at the hepatocytes. In the present work, we synthesized a molecule able to both lower intracellular copper, namely Cu(I), and target hepatocytes, combining within the same structure a chelating unit and a carbohydrate recognition element. A cyclodecapeptide scaffold displaying a controlled conformation with two independent faces was chosen to introduce both units. One face displays a cluster of carbohydrates to ensure an efficient recognition of the asialoglycoprotein receptors, expressed on the surface of hepatocytes. The second face is devoted to metal ion complexation thanks to the thiolate functions of two cysteine side-chains. To obtain a chelator that is active only once inside the cells, the two thiol functions were oxidized in a disulfide bridge to afford the glycopeptide P(3). Two simple cyclodecapeptides modeling the reduced and complexing form of P(3) in cells proved a high affinity for Cu(I) and a high selectivity with respect to Zn(II). As expected, P(3) becomes an efficient Cu(I) chelator in the presence of glutathione that mimics the intracellular reducing environment. Finally, cellular uptake and ability to lower intracellular copper were demonstrated in hepatic cell lines, in particular in WIF-B9, making P(3) a good candidate to fight copper overload in the liver.     

Phototropism: a "simple" physiological response modulated by multiple interacting photosensory-response pathways

Phototropism is the process by which plants reorient growth of various organs, most notably stems, in response to lateral differences in light quantity and/or quality. The ubiquitous nature of the phototropic response in the plant kingdom implies that it provides some adaptive evolutionary advantage. Upon visual inspection it is tempting to surmise that phototropic curvatures result from a relatively simple growth response to a directional stimulus. However, detailed photophysiological, and more recently genetic and molecular, studies have demonstrated that phototropism is in fact regulated by complex interactions among several photosensory systems. At least two receptors, phototropin and a presently unidentified receptor, appear to mediate the primary photoreception of directional blue light cues in dark-grown plants. PhyB may also function as a primary receptor to detect lateral increases in far-red light in neighbor-avoidance responses of light-grown plants. Phytochromes (phyA and phyB at a minimum) also appear to function as secondary receptors to regulate adaptation processes that ultimately modulate the magnitude of curvature induced by primary photoperception. As a result of the interactions of these multiple photosensory systems plants are able to maximize the adaptive advantage of the phototropic response in ever changing light environments.     

An optimized sampling and GC-MS analysis method for benzene in exhaled breath, as a biomarker for occupational exposure

Benzene is known to be toxic and carcinogenic: therefore, in case of exposure to benzene vapours, a reliable biological monitoring procedure is needed, particularly in the field of occupational hygiene. The determination of the concentration of benzene in the exhaled air 8 h after the exposure has been demonstrated to be a significant biomarker, even for low concentrations of airborne benzene vapours. This work presents a sampling and analysis method that optimizes previously described procedures: in the sampling phase, a double-step sample collection in Tedlar bags is used, in order to remove the breath moisture and to standardise the sample volumes. The analytical phase uses a cryogenic trap for the concentration of the air samples to be injected in the GC-MS, without the need for trapping materials, significantly reducing time and costs of the analysis and improving sensitivity. The presented method has been successfully applied to the biological monitoring of a mixed population (occupationally exposed and not exposed subjects, smokers and non-smokers), with a lower detection limit of 1.5 ng of benzene per litre of exhaled air, that is 1/200 of the biological exposure index recommended by the American Conference of Governmental Hygienists.     

A fresh look at dense hydrogen under pressure. IV. Two structural models on the road from paired to monatomic hydrogen, via a possible non-crystalline phase

In this paper, we examine the transition from a molecular to monatomic solid in hydrogen over a wide pressure range. This is achieved by setting up two models in which a single parameter δ allows the evolution from a molecular structure to a monatomic one of high coordination. Both models are based on a cubic Bravais lattice with eight atoms in the unit cell; one belongs to space group Pa3, the other to space group R3m. In Pa3 one moves from effective 1-coordination, a molecule, to a simple cubic 6-coordinated structure but through a very special point (the golden mean is involved) of 7-coordination. In R3m, the evolution is from 1 to 4 and then to 3 to 6-coordinate. If one studies the enthalpy as a function of pressure as these two structures evolve (δ increases), one sees the expected stabilization of minima with increased coordination (moving from 1 to 6 to 7 in the Pa3 structure, for instance). Interestingly, at some specific pressures, there are in both structures relatively large regions of phase space where the enthalpy remains roughly the same. Although the structures studied are always higher in enthalpy than the computationally best structures for solid hydrogen - those emerging from the Pickard and Needs or McMahon and Ceperley numerical laboratories - this result is suggestive of the possibility of a microscopically non-crystalline or "soft" phase of hydrogen at elevated pressures, one in which there is a substantial range of roughly equi-enthalpic geometries available to the system. A scaling argument for potential dynamic stabilization of such a phase is presented.