Hydrophilic elastomers for microcontact printing of polar inks

A moderately hydrophilic, thermoplastic elastomer (poly(ether-ester)) was investigated as a stamp material for microcontact printing of a polar ink: pentaerythritol-tetrakis-(3-mercaptopropionate). Stamps with a relief structure were produced from this polymer by hot embossing, and a comparison was made with conventional poly(dimethylsiloxane) (PDMS) and oxygen-plasma-treated PDMS. It is shown that the hydrophilic stamps can be used for the repetitive printing (without re-inking) of at least 10 consecutive patterns, which preserve their etch resistance, and this in rather sharp contrast to conventional and oxygen plasma-treated PDMS stamps. It is argued that these enhanced printing characteristics of the hydrophilic stamps originate from an improved wetting and solubility of polar inks in the hydrophilic stamp.     

Stamping patterns of insulated gold nanowires with self-organized ultrathin polymer films

A thermal contact transfer technique is presented for the fabrication of nanoscaled to microscaled patterns of polymer-insulated metal structures on ceramic surfaces using metal-coated, thermoplastic stamps. The thermally activated formation of polymer-metal-polymer (PMP) heterostructures occurs spontaneously when a metal-coated thermoplastic stamp is compressed against a ceramic substrate and subsequently heated. The presented technique exploits the dynamics of ultrathin polymer films localized at interfaces and interfacial forces to prompt local reorganization of polymer stamp materials during processing. Intercalation of polymer stamp materials into the metal-substrate interface yields a cohesive polymer layer that binds the metal layer to the substrate. Disproportionate adhesion between the bulk polymer and the polymer layer at the stamp-metal interface leaves a capping layer upon separation of the stamp from the substrate. Here we demonstrate this technique with single use, bilevel polymer stamps which afford transfer of two distinct general products. The transfer of insulated submicrometer wide wires from the raised stamp features affords patterns of trilayered PMP structures with uniform wire dimensions. Concomitant transfer from the recessed stamp features allows fabrication of multilayered PMP architectures with sub-100 nm spacing from microstructured polymer stamps. Thus, patterns with two different insulated nanowire widths are readily fabricated in a single stamping process. A variety of ceramic substrates, thermoplastic materials, and metals can be used; e.g., inexpensive gold-coated CD or DVD media can be used as stamps, where the combination of materials dictates the relative interfacial forces and the processing parameters.     

Fabrication of hierarchical structures by unconventional two-step imprinting

We present a simple sequential imprinting lithography method to fabricate micro/nanoscale hierarchical structures. This method involves hot embossing and capillary force lithography with two stamps of different microscales, which avoids using nanoscale stamps. By varying the experimental conditions in the capillary force lithography process, the morphology of the resulting structures can be controlled. This method may provide a facile and low-cost route for fabricating large area patterns of hierarchical structures.     

Polymer microfabrication methods for microfluidic analytical applications

A growing number of microsystem technology (MST) applications, particularly in the field of microfluidics with its applications in the life sciences, have a need for novel fabrication methods which account for substrates other than silicon or glass. We present in this paper an overview of existing polymer microfabrication technologies for microfluidic applications, namely replication methods such as hot embossing, injection molding and casting, and the technologies necessary to fabricate the molding masters. In addition, techniques such as laser ablation and layering techniques are examined. Methods for bonding and dicing of polymer materials, which are necessary for complete systems, are evaluated.     

Versatile Stamps in Microcontact Printing: Transferring Inks by Molecular Recognition and from Ink Reservoirs

Microcontact printing is a heavily used surface modification method in materials and life science applications. This concept article focuses on the development of versatile stamps for microcontact printing that can be used to bind and release inks through molecular recognition or through an ink reservoir, the latter being used for the transfer of heavy inks, such as biomolecules and particles. Conceptually, such stamp properties can be introduced at the stamp surface or by changing the bulk stamp material; both lines of research will be reviewed here. Examples include supramolecular stamps with affinity properties, polymer‐layer‐grafted PDMS stamps, and porous multilayer‐grafted PDMS stamps for the first case, and hydrogel stamps and porous stamps made by phase‐separation micromolding for the second. Potential directions for future advancement of this field are also discussed.     

High-resolution poly(ethylene terephthalate) (PET) hot embossing at low temperature: thermal, mechanical, and optical analysis of nanopatterned films

In this work we present controlled, low-damage nanotopographic surface modification of poly(ethylene terephthalate) (PET). High-resolution nanopatterning over macroscopic areas was performed by " low-temperature" hot embossing lithography (HEL). While for standard HEL the temperature is typically raised up to many tens of Celsius degrees above the polymer glass transition temperature (Tg), we demonstrate optimal results at a temperature very close to the bulk Tg of PET (72 degrees C). Nanopits and nanobarcodes were transferred onto the surface of PET commercial sheets, demonstrating reliable sub-100 nm resolution over macroscopic areas. Sample optical, mechanical, and thermal characteristics were systematically analyzed before and after embossing at low (75 degrees C) and high (150 degrees C) temperature by attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy, tensile tests, and differential scanning calorimetry (DSC). We show that, while conventional high-temperature HEL can lead to dramatic degradation of the polymer in terms of transparency, flexibility, and crystallinity content, our low-temperature process fully maintains original surface and bulk substrate properties.     

Poly(dimethylsiloxane) contamination in microcontact printing and its influence on patterning oligonucleotides

It is well-established that, during microcontact printing (muCP) using poly(dimethylsiloxane) (PDMS)-based stamps, some unexpected siloxane fragments can be transferred from the stamp to the surface of the sample. This so-called contamination effect coexists with the delivery of the molecules constituting the ink and by this way influences the printing process. The real impact of this contamination for the muCP technique is still partially unknown. In this work, we investigate the kinetics of this contamination process through the surface characterization of both the sample and the stamp after imprinting. The way both the curing conditions of the PDMS material and the contact time influence the degree of contamination of the surface is investigated on silicon and glass substrates. We propose a cleaning process of the stamp during several hours which eliminates any trace of contamination during printing. We show that hydrophobicity recovery of PDMS surfaces after hydrophilic treatment using oxygen plasma is considerably slowed down when the PDMS material is cleaned using our procedure. Finally, by comparing cleaned and uncleaned PDMS stamps, we show the influence of contamination on the quality of muCP using fluorescent DNA molecules as an ink. Surprisingly, we observe that the amount of DNA molecules transferred during muCP is higher for the uncleaned stamp, highlighting the positive impact of the presence of low molecular weight siloxane fragments on the muCP process. This result is attributed to the better adsorption of oligonucleotides on the stamp surface in presence of these contaminating molecules.     

Surface modification of elastomeric stamps for microcontact printing of polar inks

Chemical modification of the surface of a stamp used for microcontact printing (microCP) is interesting for controling the surface properties, such as the hydrophilicity. To print polar inks, plasma polymerization of allylamine (PPAA) was employed to render the surface of poly(dimethylsiloxane) (PDMS), polyolefin plastomers (POP), and Kraton elatomeric stamps hydrophilic for long periods of time. A thin PPAA film of about 5 nm was deposited on the stamps, which increased the hydrophilicity, and which remained stable for at least several months. These surface-modified stamps were used to transfer polar inks by microCP. The employed microCP schemes are as follows: (a) a second generation of dendritic ink having eight dialkyl sulfide end groups to fabricate patterns on gold substrates by positive microCP, (b) fluorescent guest molecules on beta-cyclodextrin (beta-CD) printboards on glass employing host-guest recognition, and (c) Lucifer Yellow ethylenediamine resulting in covalent patterning on an aldehyde-terminated glass surface. All experiments resulted in an excellent performance of all three PPAA-coated stamp materials to transfer the polar inks from the stamp surface to gold and glass substrates by microCP, even from aqueous solutions.     

A Simple Method for Fabricating Patterned Curvilinear Microstructures in Poly(dimethylsiloxane) by Selective Wetting

The fabrication of patterned microstructures in poly(dimethylsiloxane) (PDMS) is a prerequisite for soft lithography. Herein, curvilinear surface relief microstructures in PDMS are fabricated through a simple three‐stage approach combining microcontact printing (μCP), selective surface wetting/dewetting and replica molding (REM). First, using an original PDMS stamp (first‐generation stamp) with linear relief features, a chemical pattern on gold substrate is generated by μCP using hexadecanethiol (HDT) as an ink. Then, by a dip‐coating process, an ordered polyethylene glycol (PEG) polymer‐dot array forms on the HDT‐patterned gold substrate. Finally, based on a REM process, the PEG‐dot array on gold substrate is used to fabricate a second‐generation PDMS stamp with microcavity array, and the second‐generation PDMS stamp is used to generate third‐generation PDMS stamp with microbump array. These fabricated new‐generation stamps are utilized in μCP and in micromolding in capillaries (MIMIC), allowing the generation of surface micropatterns which cannot be obtained using the original PDMS stamp. The method will be useful in producing new‐generation PDMS stamps, especially for those who want to use soft lithography in their studies but have no access to the microfabrication facilities.     

A method of printing uniform protein lines by using flat PDMS stamps

In this paper, we report a method of printing uniform protein lines on glass slides by using UV-treated flat PDMS stamps. Unlike traditional microcontact printing (μCP) which requires microstructured PDMS stamps, this μCP method only requires a flat PDMS stamp, an UV lamp and a number of straight needles. Our results show that lines of bovine serum albumin (BSA), immunoglobin (IgG), anti-biotin, anti-human IgG and anti-mouse IgG can be printed evenly on glass slides by using this μCP method. We also demonstrate that the printed protein lines are suitable for applications such as microfluidic immunoassays.     

Monte Carlo simulations of the polymer glass transition: From the test of theories to material modeling

We present results on the glass transition in polymer melts using Monte Carlo simulations of the bond fluctuation lattice model. There are two questions we address in this work. What is the temperature dependence of the entropy density in such a model polymer melt and how well is it described by theories like the Gibbs-DiMarzio theory of the glass transition? And to what degree is one able to map the Hamiltonian of such an abstract lattice model onto a specific polymer material and use it to model the large scale and long time properties of a realistic polymer melt?     

Effect of fluorine plasma treatment on PMMA and their application to passive optical waveguides

Poly(methylmethacrylate) (PMMA) has been a good prospect for the development of fully amorphous and highly transparent microphotonic devices. The possibilities of a hot embossing technique for the polymeric fabrication of optical waveguides were investigated in this work. A new technique based on radiofrequency plasma treatment was studied for thermal and optical properties, including glass transition temperature, thermal stability, refractive index, and optical transmission loss of PMMA. It is shown that the plasma treatment is effective in altering the functional groups of polymer surfaces without affecting the bulk properties, resulting in effective control of refractive indices and optical transmission losses for photonic applications.     

Chemically patterned flat stamps for microcontact printing

Locally oxidized patterns on flat poly(dimethylsiloxane) stamps for microcontact printing were used as a platform for the transfer of a hydrophilic fluorescent ink to a glass substrate. The contrast was found to be limited. These locally oxidized patterns were conversely used as barriers for the transfer of hydrophobic n-octadecanethiol. In this case a good contrast was obtained, but the pattern was found to be susceptible to defects (cracks) in the barrier layer. Local stamp surface oxidation and subsequent modification with 1H,1H,2H,2H-perfluorodecyltrichlorosilane, for use as a barrier in the transfer of n-octadecanethiol, 16-mercaptohexadecanoic acid, and octanethiol, resulted in remarkably good contrast and stable patterns. The improved ink transfer control is ascribed to the reduction of undesired surface spreading and a superior mechanical stability of the stamp pattern. This new approach substantially expands the applicability of microcontact printing and provides a tool for the faithful reproduction of even extremely low filling ratio patterns.     

Bifunctional, chemically patterned flat stamps for microcontact printing of polar inks

Different methods to create chemically patterned, flat PDMS stamps with two different chemical functionalities were compared. The best method for making such stamps, functionalized with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFDTS) and 3-(aminopropyl)triethoxysilane (APTS), appeared to be full functionalization of a freshly oxidized flat PDMS stamp with either adsorbate, followed by renewed oxidation through a mask and attachment of the other adsorbate. These stamps were used to transfer polar inks (a thioether-functionalized dendrimer and a fluorescent dye) by microcontact printing. The PFDTS monolayer was used as a barrier against ink transfer, while the APTS SAM areas functioned as an ink reservoir for polar inks. The printing results confirmed the excellent transfer of hydrophilic inks with these stamps to gold and glass substrates, even from aqueous solutions. Attachment of a fluorescent dye on the amino-functionalized regions shows the possibility of the further modification of the chemically patterned stamps for tailoring of the stamps' properties.     

Disposable roll-to-roll hot embossed electrophoresis chip for detection of antibiotic resistance gene mecA in bacteria

We present a high-throughput roll-to-roll (R2R) manufacturing process for foil-based polymethyl methacrylate (PMMA) chips of excellent optical quality. These disposable, R2R hot embossed microfluidic chips are used for the identification of the antibiotic resistance gene mecA in Staphylococcus epidermidis. R2R hot embossing is an emerging manufacturing technology for polymer microfluidic devices. It is based on continuous feeding of a thermoplastic foil through a pressurized area between a heated embossing cylinder and a blank counter cylinder. Although mass fabrication of foil-based microfluidic chips and their use for biological applications were foreseen already some years ago, no such studies have been published previously.     

A benchtop method for the fabrication and patterning of nanoscale structures on polymers

A benchtop method for the facile production of nanoscale metal structures on polymers is demonstrated. This approach allows for the design and patterning of a wide range of metallic structures on inexpensive polymer surfaces, affording the fabrication of nanoscaled platforms for use in the design of sensors, actuators, and disposable electronic and photonic devices. Numerous structures, from simple nanowires to multilayered metallic gratings, are demonstrated, with sizes ranging from microns to the nanoscale. The process involves molding a malleable metal film deposited on a rigid substrate such as mica, by the compression of a plastic polymer stamp with the desired pattern against the metal film. While under compression, an etchant is then used to modify the metal. Upon separation of the stamp from the support, micro- to nanoscaled metallic structures are found on the stamp and/or on the substrate. The sizes of the structures formed depend on the sizes of the features on the stamp but can be fine-tuned by about 4-fold through variations in both pressure and duration of etching. Also, depending on the processing, multiple dimension metallic structures can be obtained simultaneously in a single stamping procedure. The metallic structures formed on the stamp can also be subsequently transferred to another surface allowing for the construction of multilayered materials such as band gap gratings or the application of electrical contacts. Using this approach, fabrication of both simple and complex micro- to nanoscaled structures can be accomplished by most any researcher as even the grating structure of commercial compact disks may be used as stamps, eliminating the requirement of expensive lithographic processes to form simple structures.     

Micro fabrication of microlens arrays by micro dispensing

In this study, master of the microlens arrays is fabricated using micro dispensing technology, and then electroforming technology is employed to replicate the Ni mold insert of the microlens arrays. Finally, micro hot embossing is performed to replicate the molded microlens arrays from the Ni mold insert. The resin material is used as the dispensing material, which is dropped on a glass substrate. The resin is exposed to a 380 W halogen light. It becomes convex under surface tension on the glass substrate. A master for the microlens arrays is then obtained. A 150‐nm‐thick copper layer is sputtered on the master as an electrically conducting layer. The electroforming method replicates the Ni mold insert from the master of the microlens arrays. Finally, micro hot embossing is adopted to replicate the molded microlens arrays. The micro hot embossing experiment employs optical films of polymethylmethacrylate (PMMA) and polycarbonate (PC). The processing parameters of micro hot embossing are processing temperature, embossing pressure, embossing time, and de‐molding temperature. Taguchi's method is applied to optimize the processing parameters of micro hot embossing for molded microlens arrays. An optical microscope and a surface profiler are utilized to measure the surface profile of the master, the Ni mold insert and the molded microlens arrays. AFM is employed to measure the surface roughness of the master, the Ni mold insert and the molded microlens arrays. The sag height and focal length are determined to elucidate the optical characteristics of the molded microlens arrays. Copyright © 2009 John & Sons, Ltd.     

Oxygen plasma-treatment effects on Si transfer

Oxygen plasma-treatment is commonly used to increase the hydrophilicity of poly(dimethylsiloxane) (PDMS) stamps used for microcontact printing (muCP) aqueous-based inks. Review of the literature reveals that a wide range of plasma parameters are currently employed to modify stamp surfaces. However, little is known about the effect of these parameters (e.g., power, chamber pressure, duration) on the undesirable transfer of low-molecular-weight silicon-containing fragments from the stamps that commonly occurs during muCP. To study the effect of oxygen plasma-treatment on Si transfer, unpatterned PDMS stamps were treated with oxygen plasma under various conditions and used to stamp deionized water on plasma-activated poly(methyl methacrylate) (PMMA) substrates. Once stamped, the PMMA substrates were analyzed with X-ray photoelectron spectroscopy (XPS) to quantify and characterize silicon present on the substrate surface. In addition, used PDMS stamps were analyzed with scanning electron microscopy (SEM) to observe topographical changes that occur during oxygen plasma-treatment. XPS results show that all plasma treatments studied significantly reduced the amount of Si transfer from the treated stamps during muCP as compared to untreated PDMS stamps and that the source of transfer is residual PDMS fragments not removed by oxygen plasma. SEM results show that, although the treated stamps undergo a variety of topographical changes, no correlation exists between stamp topography and extent of Si transfer from the stamps.     

Thermal properties of Nafion–TiO<Subscript>2</Subscript> composite electrolytes for PEM fuel cell

Thermal analysis has been used to evaluate the stability, glass transition, and water retention of Nafion based polymer–ceramic electrolytes. These electrolytes are envisioned as promising replacement of Nafion in fuel cells operating above 100 °C. The polymeric matrix prepared by casting exhibits lower crystallinity than the extruded Nafion, a feature that affects the water absorption properties. The addition of titania-based nanotubes and nanoparticles to the polymer has enhanced the water retention at high temperatures (~130 °C) and the glass transition temperature, respectively. Such results are important for the design of composite electrolytes for the operation of fuel cells at high temperatures.     

New family of fluorinated polymer chips for droplet and organic solvent microfluidics

We present a new family of microfluidic chips hot embossed from a commercial fluorinated thermoplastic polymer (Dyneon THV). This material shares most of the properties of fluoro polymers (very low surface energy and resistance to chemicals), but is easier to process due to its relatively low melting point. Finally, as an elastic material it also allows easy world to chip connections. Fluoropolymer films can be imprinted by hot embossing from PDMS molds prepared by soft lithography. Chips are then sealed by an original technique (termed Monolithic-Adhesive-Bonding), using two different grades of fluoropolymer to obtain uniform mechanical, chemical and surface properties. This fabrication process is well adapted to rapid prototyping, but it also has potential for low cost industrial production, since it does not require any curing or etching step. We prepared microfluidic devices with micrometre resolution features, that are optically transparent, and that provide good resistance to pressure (up to 50 kPa). We demonstrated the transport of water droplets in fluorinated oil, and fluorescence detection of DNA within the droplets. No measurable interaction of the droplets with the channels wall was observed, alleviating the need for surface treatment previously necessary for droplet applications in microfluidic chips. These chips can also handle harsh organic solvents. For instance, we demonstrated the formation of chloroform droplets in fluorinated oil, expanding the potential for on chip microchemistry.