含酰胺基Gemini阳离子表面活性剂的合成及性能

以棕榈酸、N,N-二甲基丙二胺、环氧氯丙烷和脂肪胺为原料合成了一系列Gemini阳离子表面活性剂.用红外光谱、质谱对产品进行了结构分析,并对产品性能进行了测定.结果表明:所合成的Gemini阳离子表面活性剂的临界胶束浓度低于传统阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)1-2个数量级;当浓度为1×10-3mol/...     

新型含氟系列阳离子表面活性剂的合成

以六氟丙烯二聚体和N,N-二甲基丙二胺为原料,合成N,N-二甲基-N’-(2-三氟甲基-1-五氟乙基)全氟丙烯基丙二胺（I）,通过正交实验确定了I的最佳工艺条件为：反应温度为35℃,反应时间为为8h,六氟丙烯二聚体与N,N-二甲基丙二胺的摩尔比为1:1.0,并通过IR、NMR光谱分析方法对I的结构进行确定;然后利用I分别与溴乙烷、溴代正丙烷、溴代正丁烷、溴代正己烷、溴代正辛烷和溴代正十二烷等烷基化试剂反应合成了一系列季铵盐阳离子表面活性剂,并对其结构进行了表征;结果表明,所得阳离子型含氟表面活性剂具有极低的表面张力：17.8、22.9、23.8、21.5、25.和28.1mN/m;临界胶束浓度：2.03、1.98、1.93、1.83、1.74和1.58mmol/L;且其Kraff点均低于0℃,显示了优良的水溶稳定性能。     

一类含酰胺基的两性双子表面活性剂的合成与性能研究

以长链脂肪酸、N,N-二甲基丙二胺、环氧氯丙烷为主要原料,合成制备了2种两性离子型的双子表面活性剂(D-12和D-14).目标产物经红外光谱(IR)、质谱(ESI)和元素分析测试表明其结构与设计完全一致.表面张力扫描显示,D-12和D-14的临界胶束浓度分别为6.4×10-5和4.6×10-5 mol/L,对应的表面张...     

金刚烷基甜菜碱型和季铵盐阳离子型表面活性剂的合成研究

以金刚烷胺为起始反应物,首先在过量甲酸存在下,与甲醛发生埃斯韦勒-克拉克甲基化反应合成了N,N-二甲基金刚烷叔胺,在此基础上通过N,N-二甲基金刚烷叔胺与氯乙酸钠、溴代正丁烷、溴代正辛烷、溴代十二烷、溴代十六烷等一系列季铵化试剂的季铵化反应,分别合成了N,N-二甲基金刚烷甜菜碱型表面活性剂及N-(1-金刚烷基)-N,N-二甲基正丁基溴化铵、N-(1-金刚烷基)-N,N-二甲基辛基溴化铵、N-(1-金刚烷基)-N,N-二甲基十二烷基溴化铵、N-(1-金刚烷基)-N,N-二甲基十六烷基溴化铵等金刚烷季铵盐阳离子型表面活性剂,产率分别为75%,75%,61%,44%,54%.采用元素分析,IR,1H NMR等分析手段对5种产物进行了结构鉴定,测试了各种金刚烷表面活性剂水溶液的表面张力.     

二氯化-N,N-'-二(3-脱氢松香酰氧-2-羟丙基)四甲基乙二胺的合成与性能

研究了Gemini表面活性剂中疏水"尾巴"结构对性质的影响,以脱氢松香酸和环氧氯丙烷为原料合成了中间体3-脱氢松香酰氧-2-羟丙基氯,再与四甲基乙二胺反应,得到1种以脱氢松香酰基为疏水链"尾巴"的对称Gemini型双季铵盐阳离子表面活性剂二氯化-N,N'-二(3-脱氢松香酰氧-2-羟丙基)四甲基乙二胺.在合成工艺条件的基础上,采用IR光谱、MS谱和元素分析测试技术对产物进行了结构确认.结果表明,该产物可降低水的表面张力达34.9 mN/m,临界胶束浓度为1.0×10-4 mol/L.表明具有良好疏水性能的2个大"尾巴"使合成的Gemini表面活性剂更易形成胶束,大大提高了表面活性.     

二氯化-N,N-′-二(3-脱氢松香酰氧-2-羟丙基)四甲基乙二胺的合成与性能

研究了Gemini表面活性剂中疏水"尾巴"结构对性质的影响,以脱氢松香酸和环氧氯丙烷为原料合成了中间体3-脱氢松香酰氧-2-羟丙基氯,再与四甲基乙二胺反应,得到1种以脱氢松香酰基为疏水链"尾巴"的对称Gemini型双季铵盐阳离子表面活性剂:二氯化-N,N′-二(3-脱氢松香酰氧-2-羟丙基)四甲基乙二胺。在合成工艺条件的基础上,采用IR光谱、MS谱和元素分析测试技术对产物进行了结构确认。结果表明,该产物可降低水的表面张力达34.9 mN/m,临界胶束浓度为1.0×10-4mol/L。表明具有良好疏水性能的2个大"尾巴"使合成的Gemini表面活性剂更易形成胶束,大大提高了表面活性。     

二硅烷表面活性剂的合成与表面性能测定

合成了一种新型有机硅表面活性剂--聚醚改性二硅烷。 首先以(CH3)3SiCl和(CH3)2HSiCl为原料,金属钠作还原偶合剂,二甲苯作溶剂,用Wurtz偶合法合成了含氢二硅烷,对其结构进行了红外光谱、紫外吸收光谱和气相色谱表征,并确定了合成最佳反应条件：n((CH3)3SiCl)∶n((CH3)2HSiCl)=1.2∶1,反应物浓度为1.8 mol/L,助剂15-冠醚-5用量为总反应原料质量的2%,反应温度为80 ℃,反应时间为11 h。 再以合成的含氢二硅烷和甲基封端烯丙基聚醚（Mr=400）为原料,在Karstedt铂催化剂作用下进行硅氢加成反应,合成了聚醚改性二硅烷表面活性剂,确定的合成反应最佳温度为95 ℃,时间为4 h;该表面活性剂的表面张力为22.49 mN/m,临界胶束浓度为0.9 g/L,在pH值为6.94和4.12的水溶液中,具有良好的水解稳定性。     

新型易降解的季铵盐型Gemini表面活性剂的合成

N,N-二甲基丙二胺与脂肪酸(癸酸、月桂酸或肉豆蔻酸)反应制得长链酰胺(3a ～ 3c);3与1,4-二溴丁烷反应合成了新型易降解的季铵盐型Gemini表面活性剂(1a ～1c),其结构经1H NMR和IR表征.测试结果表明,1具有极低的临界胶团浓度、较强的乳化和增溶能力.     

Al2O3负载Pt催化剂的合成及其甲醇低温催化燃烧性能研究

采用一步合成法制备了Al₂O₃负载Pt催化剂Pt/Al₂O₃,以甲醇催化燃烧作为目标反应研究了其催化性能,考察了还原剂浓度、表面活性剂用量、表面活性剂浓度和煅烧温度对Pt/Al₂O₃甲醇低温催化燃烧性能的影响。结果表明,当还原剂浓度为0.1 mol/L、表面活性剂(CTAB)用量为8.53 g/g_cat.、表面活性剂浓度为0.1 mol/L、煅烧温度为600℃时,所得催化剂的活性最高,25℃下甲醇催化燃烧的转化率达到52%。而改进一步合成法制备的负载型催化剂Pt/Al₂O₃具有更高的甲醇催化燃烧活性,25℃下甲醇催化燃烧的转化率为84%。     

N,N-二羟乙基十二烷基胺的合成及性能

以二乙醇胺和溴代十二烷为原料,在无水乙醇介质中合成了脱模剂用新型原材料N,N-二羟乙基十二烷基胺.通过正交试验法对合成工艺进行了优化,研究了各种因素对合成产率的影响,确定了在无水乙醇介质中合成该化合物的最佳工艺条件;表征了合成产物的结构,并测定了其理化性能和表面化学性能.结果表明:在无水乙醇介质中合成N,N-二羟乙基十二烷基胺简单易行,产率为85.37%.合成产物在水溶液中的临界胶束浓度为2.92×10-3mol/L,所对应的液体表面张力为20.875 mN/m.以合成产物为原材料制备的固化薄膜的表面能为14.57 mN/m,小于聚氨酯塑料的表面能29 mN/m,是聚氨酯塑料和弹性体脱模剂的理想原材料.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.