首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Many of the properties of multi-material systems and relevant devices depend on the interfaces between the different components. This review focuses on characterization of the interfaces between intrinsically conducting polymers and inorganic materials consisting of metals and metal oxides. These materials are chosen because of their importance in several analytical applications. Although use of conducting polymers and metals or metal oxides in analytical systems, specifically in sensing, is well established, the number of novel materials used for analytical purposes is continuously increasing. This further increases the possible number of effective combinations of different materials within multicomponent systems. As a consequence, innovative characterization techniques have become as important as more conventional techniques. On the other hand, sophisticated characterisation techniques are increasingly widespread and, consequently, also readily accessible. This critical review is not an exhaustive discussion of all possible analytical techniques suitable for characterization of interfaces. It is, instead, limited to an overview of the most effective, relatively widespread techniques, emphasising their most significant recent advances. Critical analysis of the individual techniques is complemented by a few selected examples.  相似文献   

2.
A review (350 references) is given to the interest of mesoporous materials for designing electrochemical sensors. After a brief summary of the implication of template‐based ordered mesoporous materials in electrochemical science, the various types of inorganic and organic‐inorganic hybrid mesostructures used to date in electroanalysis and the corresponding electrode configurations are described. The various sensor applications are then discussed on the basis of comprehensive tables and some representative illustrations. The main detection schemes developed in the field are (volt)amperometric sensing subsequent to preconcentration and electrocatalytic detection.  相似文献   

3.
等离子体金属(金、银)纳米结构因其特有的理化性能,被广泛应用于表面增强拉曼散射(Surface-enhanced Raman scattering,SERS)传感及可穿戴应力传感领域.其中,SERS是一种应用贵金属纳米材料增强拉曼散射信号的检测技术,该技术灵敏度高、特异性强,已被广泛用于生物医学、环境监测、食品药品检测...  相似文献   

4.
The works devoted to the electrodeposition of metals, alloys, and semiconductors onto the substrates through the templates of various non-conducting materials with pores of various shapes and sizes are reviewed. The composite materials, nanowires, metal foams, and the parts with nanostructured surface obtained by this method are promising materials for the electrocatalysis, electroanalysis of media, development of various sensors, modern miniature magnetic memory devices, optoelectronics, power sources, etc.  相似文献   

5.
Functionalized carbon nanoparticles (or blacks) have promise as novel active high‐surface‐area electrode materials, as conduits for electrons to enzymes or connections through lipid films, or as nano‐building blocks in electroanalysis. With previous applications of bare nanoblacks and composites mainly in electrochemical charge storage and as substrates in fuel cell devices, the full range of benefits of bare and functionalized carbon nanoparticles in assemblies and composite (bio)electrodes is still emerging. Carbon nanoparticles are readily surface‐modified, functionalized, embedded, or assembled into nanostructures, employed in bioelectrochemical systems, and incorporated into novel electrochemical sensing devices. This focus review summarizes aspects of a rapidly growing field and some of the recent developments in carbon nanoparticle functionalization with potential applications in (bio)electrochemical, photoelectrochemical, and electroanalytical processes.  相似文献   

6.
We present a simplified approach for the trace screening of toxic heavy metals utilizing bismuth oxide screen printed electrodes. The use of bismuth oxide instead of toxic mercury films facilitates the reliable sensing of lead(II), cadmium(II) and zinc(II). A linear range over 5 to 150 μg L?1 with detection limits of 2.5 and 5 μg L?1 are readily observed for cadmium and lead in 0.1 M HCl, respectively. Conducting a simultaneous multi‐elemental voltammetric detection of zinc, cadmium and lead in a higher pH medium (0.1 M sodium acetate solution) exhibited a linear range between 10 and 150 μg L?1 with detection limits of 5, 10 and 30 μg L?1 for cadmium, lead and zinc respectively. The sensor is greatly simplified over those recently reported such as bismuth nanoparticle modified electrodes and bismuth film coated screen printed electrodes. The scope of applications of this sensor with the inherent advances in electroanalysis coupled with the negliable toxicity of bismuth is extensive allowing high throughput electroanalysis.  相似文献   

7.
Although diamond electrodes are widely used in the field of electroanalysis and sensing, their application in the field of environmental engineering has yet to be fully realized. Many research studies have considered their potential application in water and wastewater treatment, where the in-situ electrochemical process can avoid the need for chemical additives by facilitating the oxidation of pollutants on the electrode surface or mediated by electrochemically synthesized oxidants in solution. Diamond-based electro-oxidation can effectively treat a number of organic micropollutants and is now being evaluated for the abatement of perfluoroalkyl and polyfluoroalkyl substances, which pose health concerns and are ubiquitous recalcitrant environmental contaminants. To move implementation of diamond-based electro-oxidation forward, the integration of modifications and codopants to yield more advanced electrode materials needs to be further developed and understood. The progress and current strategies associated with diamond electrode modifications for perfluoroalkyl and polyfluoroalkyl substances abatement as well as future considerations are discussed.  相似文献   

8.
Trace metals are required in the body as they play a significant role in several biochemical processes. Moreover, certain heavy metals are beneficial at appropriate levels. Copper (Cu), for example, is essential for red blood cell formation, bone strength, and infant growth. Despite these fundamental roles, Cu can become toxic at high levels. Other heavy metals such as lead (Pb), cadmium (Cd), manganese (Mn), and mercury (Hg), have been identified to cause acute and chronic health complications. For these reasons, rapid, real-time quantification of such metals in biological media is of interest to improving human health outcomes. Electrochemical methods offer numerous advantages, such as portability, capability to be miniaturized, low cost, and ease-of-use. In this review, we examine recent developments in electrochemical sensing for the detection of heavy metals in biological media. To meet the requirements for inclusion in this review, the electrochemical sensor must have been evaluated in biological media (blood, serum, sweat, saliva, urine, brain tissue/cells). Several applications are explored to examine recent advancements in electrochemical sensing within these matrices. Addressing the challenges through materials, device, and system innovations, it is expected that electrochemical sensing of heavy metals in biological media will facilitate future diagnoses and treatments in healthcare.  相似文献   

9.
The exponential growth in the research field of water pollution control demands the evolution of novel sensing materials for regulation and quantification of metals ions. Within this context, the current work reports a new strategy for the synthesis of carbon dots from the hydrothermal treatment of organic nanoparticles. The organic nanoparticles are found to be selective towards Cs(I) ions with a detection limit of 5.3 nM, whereas the highly fluorescent carbon dots are found to be selective towards Ag(I) ions with a detection limit of 4.8 nM. Both sensing systems illustrate rapid sensing with a working pH range from 4–9. The interfacial molecular restructuring of the sensing systems in the aqueous phase has been investigated in the absence and presence of targeted metal ions using a sum frequency generation vibrational spectroscopic tool. The practical applicability of the sensors was checked in environmental samples. This work opens new avenues for the exploration of temperature‐guided sensing modulation in nanomaterials.  相似文献   

10.
In the last decades, compounds with ‘Aggregation-Induced Emission’ (AIE), which are weakly or non-emissive at all in solution but exhibit a strong luminescence in aggregated states, have emerged as an extraordinary breakthrough in the field of luminescent materials, allowing to circumvent ‘Aggregation Caused Quenching’ (ACQ), which in many cases prevents the development of efficient solid-state materials for optoelectronic applications.Since the discovery of AIE, many AIE-active materials have been developed, most of them composed of organic molecules, and thus fluorescent in nature. Although a wide range of applications such as bioimaging, sensing, multi-stimuli responsive materials, and optoelectronic devices have been proposed for this new class of materials, triplet harvesting phosphorescent materials have much longer lifetimes as compared to their singlet harvesting analogues, and for this particular reason, the development of AIE-active phosphorescent materials seems to be a promising strategy from the applications point of view. In this respect, the synthesis of new AIE-active systems including heavy metals that would facilitate the population of low-lying excited triplet states via spin-orbit coupling (SOC), for which the strength increases as the fourth power of atomic number, i.e. Z4, is highly desirable. This review covers the design and synthetic strategies used to obtain the AIEgens reported in the literature that contain either d-block metals such as Cu(I), Zn(II), Re(I), Ru(II), Pd(II), Ir(III), Pt(II), Au(I), and Os(IV), describing the mechanisms proposed to explain their AIE. New emerging high-tech applications such as OLEDs, chemical sensors or bioimaging probes proposed for these materials are also discussed in a separate section.  相似文献   

11.
Wanekaya AK 《The Analyst》2011,136(21):4383-4391
This article reviews applications of nanoscale carbon-based materials in heavy metal sensing and detection. These materials, including single-walled carbon nanotubes, multi-walled carbon nanotubes and carbon nanofibers among others, have unique and tunable properties enabling applications in various fields spanning from health, electronics and the environment sector. Specifically, we highlight the unique properties of these materials that enable their applications in the sorption and preconcentration of heavy metals ions prior to detection by spectroscopic, chromatographic and electrochemical techniques. We also discuss their distinct properties that enable them to be used as novel electrode materials in sensing and detection. The fabrication and modification of these electrodes is discussed in detail and their applications in various electrochemical techniques such as voltammetric stripping analysis, potentiometric stripping analysis, field effect transistor-based devices and electrical impedance are critically reviewed. Perspectives and futures trends in the use of these materials in heavy metal sensing and detection will also be highlighted.  相似文献   

12.
Some fundamental principles involved in controlled potential electroanalysis are discussed. A potentiostat is described which automatically maintains the potential of a working electrode constant during an electrolysis. Cells for different applications of controlled potential electrolysis are described. Some typical applications are reviewed, including electrogravimetric determinations of metals, electrolytic separation of metals with mercury and platinum cathodes prior to polarographic analysis, coulometric analysis, identification of the oxidation states that correspond to polarographic waves, and electrolytic preparation of organic and inorganic compounds.  相似文献   

13.
Principles and practical application of combinatorial electrochemistry in search for new electroactive materials in electroanalysis have been explored. Nanoparticles of three different metals: silver, gold and palladium have been independently synthesized on the glassy carbon spherical powder surface by electroless deposition process and characterized using both spectroscopic and electrochemical techniques. These three materials were then combined together onto basal plane pyrolytic graphite electrode surface and the application of the combinatorial approach to find the electrode material for bromide detection as model target analyte was demonstrated. The component electroactive for bromide detection was next identified and it was found that silver nanoparticles were the active ones. A composite electrode based on silver nanoparticle modified glassy carbon powder and epoxy resin was then fabricated and it was found to allow accurate determination of bromide. The electroactivity for the bromide determination of the composite electrode was compared with that of a bulk silver electrode and it was shown that the composite electrode is very efficient with a comparable electroactivity with only a portion of precious metals being used for its construction.  相似文献   

14.
The recent development, behavior and scope of edge plane pyrolytic graphite electrodes in electroanalysis are overviewed. Similarities to, and advantages, over multi-walled CNT modified electrodes are noted and the wide scope of applications, ranging through gas sensing, stripping voltammetry and biosensing, illustrated.  相似文献   

15.
16.
爆炸物检测是当前国际安全中迫切关注的问题之一。在过去的几十年中,大量的荧光传感材料用于荧光传感检测气态、液态和固态爆炸物见诸于报道。近年来,为了实现爆炸物的快速响应、高灵敏和高选择性的检测,研究工作者大力开发了各种新型荧光材料。这篇综述总结了近年来用于爆炸物检测的先进荧光材料,详尽、系统、重点地介绍了共轭聚合物、荧光小分子、超分子体系、具有聚集诱导发光效应的活性材料及静电纺丝纳米材料等各种荧光材料在爆炸物检测中的应用,展望了荧光传感方法在爆炸物检测领域的应用前景。  相似文献   

17.
Highly toxic metals (Hg2+, Pb2+, Cd2+ and Cr6+) in environment waters greatly threaten the health of human beings and ecosystem. Photoluminescent sensing has been considered as an effective technology for metals monitoring in environment medium. In this paper, photoluminescent materials for the sensing of highly toxic metal ions (HTMs) were reviewed. These materials were categorized as downconversion materials and upconversion nanomaterials, according to the mechanism of photon conversion. Downconversion materials generally include organic probes, quantum dots, and Au or Ag nanomaterials. Together with upconversion nanomaterials, they are introduced in terms of textures and modification methods. The working mechanisms were introduced emphatically as well as their advantages and disadvantages for HTMs sensing. In Section 4, the conclusion and perspectives of photoluminescent sensing materials are summarized, and it is expected that this review will be helpful for the understanding and fundamental studies of photoluminescent materials for the detection of HTMs.  相似文献   

18.
This review focuses on the research progress of non-noble-metal materials with nanostructures for plasmonic biosensing. Firstly, the physical and sensing principles of localized surface plasmon resonance (LSPR) sensors are briefly introduced; then non-noble-metal materials, such as copper, aluminum, semiconductor, graphene and other materials, for plasmonic sensing are categorized and presented. Finally, a rational discussion about the future prospective of novel materials for plasmonic sensing is given.  相似文献   

19.
The survival of living beings, including humanity, depends on a continuous supply of clean water. However, due to the development of industry, agriculture, and population growth, an increasing number of wastewaters is discarded, and the negative effects of such actions are clear. The first step in solving this situation is the collection and monitoring of pollutants in water bodies to subsequently facilitate their treatment. Nonetheless, traditional sensing techniques are typically laboratory-based, leading to potential diminishment in analysis quality. In this paper, the most recent developments in micro- and nano-electrochemical devices for pollutant detection in wastewater are reviewed. The devices reviewed are based on a variety of electrodes and the sensing of three different categories of pollutants: nutrients and phenolic compounds, heavy metals, and organic matter. From these electrodes, Cu, Co, and Bi showed promise as versatile materials to detect a grand variety of contaminants. Also, the most commonly used material is glassy carbon, present in the detection of all reviewed analytes.  相似文献   

20.
The article aims at giving a critical overview of the passage from bare to modified electrode systems, proposed for amperometric sensing. An introduction is made with reference to the development of modified electrodes since the beginning, i.e. from the 1970s. A subsequent time border is arbitrarily identified around the middle of 1990s. Since those years, many novelties, coming in part from chemistry and in big part from physics and engineering, induced deep changes in the approach to the electroanalytical research; they are tentatively outlined. The term ??research?? is intentionally used to underline that wide room is still available to applications, waiting for efforts by electrochemists. It is also emphasised that the nature of the modifying systems has been only occasionally tailor-made, i.e. designed and developed on purpose. A strict enough connection between the electrochemists and the chemists expert in synthesis has been and still is often scarce. This notwithstanding, the number of novel potentially interesting materials suitable to develop electroanalytical systems highly effective in applications is so high that the next future of electroanalysis seems definitely promising. A brief critical analysis of electrode systems based on similar materials is made.   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号