铜基非贵金属氧还原电催化剂的研究进展

面对日益严重的全球能源危机,燃料电池作为一种清洁的能源转换装置在全世界范围内得到了广泛关注。燃料电池是一种能够使氢气、甲醇、甲酸和乙醇等小分子燃料和氧气发生氧化还原反应,并将其化学能转换为电能的新型装置。在燃料电池中,由于在阴极发生的氧气还原反应动力学速率缓慢而使得燃料电池的整体转换效率过低,目前商用的燃料电池一般采用贵金属铂作为催化剂来加速其反应。但由于铂的价格高昂且在反应过程中易被反应中间产物毒化而活性下降,使得燃料电池的整体成本过高,从而阻碍了燃料电池的实际商业化。为此,人们尝试利用非贵金属催化剂来替代铂基催化剂。找到一种廉价且高效的氧还原催化剂是目前燃料电池发展急需打破的瓶颈问题之一。近年来,人们发现铁、钴、锰等地表储量丰富的金属元素具有较高的氧还原催化活性。然而,作为一种最常见的金属元素,金属铜在氧还原催化剂方面研究较少。人们发现一些生物酶,如虫漆酶、细胞色素c氧化酶等能够高效地催化氧气还原,如虫漆酶在催化氧还原过程中仅表现出约20 mV的过电位,与金属铂(约200 mV)相比基本可忽略。通过研究这些活性生物酶,人们发现其活性中心均为含Cu的物质。进一步研究这些生物酶的活性位点,然后合成不同的铜基纳米材料去模拟酶的活性位点,以期望能够实现经济、高效催化氧还原反应。
　　本文总结了基于铜的纳米材料在催化氧还原方面的研究进展,首先介绍了一些氧还原实验测试中的基本概念,主要包括不同电解质条件下氧还原的反应机理以及常用的测试手段和性能评价指标。氧还原催化剂的性能应该综合活性、稳定性、抗毒化能力以及催化剂成本等多个方面来评价与比较。随后,我们概括性地介绍了铜基氧还原催化剂的发展现状。根据铜基催化剂的不同类型,我们主要分为三个部分进行介绍：(1)铜的复合物,这部分主要从模拟虫漆酶和模拟细胞色素c氧化酶两个方面分类介绍;(2)铜的化合物,这部分主要介绍了不同价态的铜的氧化物和铜的硫化物;(3)其它铜基催化剂,这部分主要介绍基于铜的尖晶石结构、有机框架材料及载体负载的铜纳米粒子作为氧还原催化剂,以及铜作为掺杂元素在提高锰的不同氧化物催化活性中的作用。最后,通过综合分析铜基氧还原催化剂的发展历程以及目前燃料电池的研究进展,我们对基于铜的氧还原催化剂的未来发展方向做了一些展望。继续研究、探索酶的氧还原活性位点以及机理依然是重中之重,只有完全理解了酶的催化机理,才能够很好的设计并合成材料来对其活性位点进行模拟,从而制备出高性能且低成本的铜基氧还原催化剂。希望本文能够使读者认识到燃料电池氧还原催化剂的发展现况,以及铜基氧还原催化剂目前存在的问题及其未来的发展方向。     

甲醇浓度对Pt/C催化剂氧还原活性的影响

采用半池考察了Pt/C催化剂在含不同浓度甲醇的0.5mol/L硫酸中的氧还原活性(ORR).研究发现,当甲醇浓度为0.1mol/L时,Pt/C催化剂的ORR活性最高,在催化层上热压商品NafionNRE-212膜后也出现同样趋势.线性扫描伏安曲线显示,压膜前后的Pt/C催化剂的ORR活性在含0.1mol/L甲醇的0.5mol/L硫酸中几乎没有变化.电化学阻抗谱结果表明,在该溶液中,Nafion膜的电阻比在其它电解液中低,这可能是导致Pt/C催化剂ORR活性提高的主要原因.有必要关注Nafion膜的这一异常性质并通过特殊设计后用于电池堆,以提高燃料电池性能.     

应用于氧还原反应的石墨烯-无定形碳核壳结构复合材料载铂催化剂(英文)

采用氯化法制备石墨烯-无定型碳复合材料(GNS@a-C),并用作质子交换膜燃料电池(PEMFC)氧还原反应Pt催化剂的载体.结果显示,所制Pt/GNS@a-C催化剂与传统商业催化剂Pt/C相比,有较好的活性和较高的稳定性:质量活性(0.121 A/mg)几乎是Pt/C(0.064 A/mg)的两倍.更重要的是,该新型催化剂加速4000圈后其电化学活性面积保留了最初的51%,与Pt/C的33%相比,前者有更好的电化学稳定性,显示它在PEMFC中将具有较好的应用潜力.     

Fe,Cu-codoped metal-nitrogen-carbon catalysts with high selectivity and stability for the oxygen reduction reaction

Metal-nitrogen-carbon materials(M-N-C) are non-noble-metal-based alternatives to platinum-based catalysts and have attracted tremendous attention due to their low-cost,high abundance,and efficient catalytic performance towards the oxygen reduction reaction(ORR).Among them,Fe-based materials show remarkable ORR activity,but they are limited by low selectivity and low stability.To address these issues,herein,we have synthesized FeCu-based M-N-C catalysts,inspired by the bimetal center of cytochrome c oxidase(CcO).In acidic media,the selectivity was notably improved compared with Febased materials,with peroxide yields less than 1.2%(<1/3 of the hydrogen peroxide yields of Fe-N-C catalysts).In addition to Cu-N-C catalysts which can catalytically reduce hydrogen peroxide,the reduction current of hydrogen peroxide using FeCu-N-C-20 exceeded that of Fe-N-C by about 6% when the potential was greater than 0.4 V.Furthermore,FeCu-based M-N-C catalysts suffered from only a15 mV attenuation in their half-wave potentials after 10,000 cycles of accelerated degradation tests(ADT),while there was a 30 mV negative shift for Fe-N-C.Therefore,we propose that the H₂O₂ released from Fe-Nx sites or N-doped carbon sites would be reduced by adjacent Cu-Nx sites,re sulting in low H₂O₂ yields and high stability.     

Facile synthesis of Zr-and Ta-based catalysts for the oxygen reduction reaction

Cathode catalysts for direct alcohol fuel cells (DAFCs) must have high catalytic activity for the oxy‐gen reduction reaction (ORR), low cost, and high tolerance to the presence of methanol or ethanol. Pt is the benchmark catalyst for this application owing to its excellent electrocatalytic activity, but its high cost and low tolerance to the organic fuel permeating through the membrane have hindered the commercialization of DAFCs. Herein we present a facile synthesis route to obtain organic fuel‐tolerant Zr‐ and Ta‐based catalysts supported on carbon. This method consists of a simple precipitation of metal precursors followed by a heat treatment. X‐ray diffraction analyses confirmed that the obtained samples were crystalline ZrO2?x and Na2Ta8O21?x having crystallite sizes of 26 and 32 nm, respectively. The thermal treatment effectively increased the activity of the catalysts to‐wards the ORR, although further optimization is necessary. Both catalysts exhibited a high tolerance to the presence of methanol with only a moderate reduction in ORR activity even at high methanol concentration (0.5 mol/L).     

Influence of selenium on the catalytic properties of ruthenium-based cluster catalysts for oxygen reduction

The favourable influence of selenium on the catalytic properties of Ru-based catalysts for the oxygen reduction reaction in acid electrolytes has been investigated by rotating disk electrode measurements. Compared to the oxygen reduction of selenium-free Ru-based catalysts, the overpotential at low current densities (ca. 10 μA cm⁻²) is not affected by the presence of selenium whereas selenium-containing catalysts show higher current densities under fuel cell relevant conditions. The kinetically controlled current density at 0.6 V versus SHE increases 4–5 fold with increasing selenium content. A maximum value is obtained at about 15 mol% Se. This effect is tentatively explained by a modification of the catalytic active centre, which is assumed to consist of Ru---C---CO complexes. IR spectroscopic investigations indicate a reaction of selenium with these complexes. This model is also supported by the study of the electrooxidation of CO. In contrast to the selenium-free catalyst, no CO oxidation is observed on the selenium-containing catalyst. Additional effects of selenium are an enhanced stability towards electrochemical oxidation and a lower amount of Ru oxides formed during synthesis, as evidenced from XRD investigations. Direct four electron oxygen reduction to water is efficient and H₂O₂ production of these catalysts is small (about 5% at potentials <0.3 V vs. SHE ).     

碳基无金属氧还原电催化剂研究的新进展

以替代铂为目标的高性能廉价氧还原电催化剂的研究为当今科学前沿. 近年来人们发现, 掺杂的碳基纳米结构具有催化活性高、稳定性好、资源丰富、抗CO和抗甲醇能力强等优点, 是一种新型无金属氧还原电催化剂, 具有替代铂基催化剂的潜力. 本文结合作者课题组的最新研究成果, 简要综述了碳基无金属氧还原电催化剂研究的主要进展, 重点关注了富电子氮和缺电子硼单/共掺杂的碳纳米结构的氧还原催化性能及其与电子结构的关系, 展望了碳基无金属氧还原催化剂的发展策略与前景.     

以金属有机骨架为前驱体的高活性氧还原非贵金属催化剂制备

The development of a non‐precious metal electrocatalyst (NPME) with a performance superior to commercial Pt/C for the oxygen reduction reaction (ORR) is important for the commercialization of fuel cells. We report the synthesis of a NPME by heat‐treating Co‐based metal organic frameworks (ZIF‐67) with a small average size of 44 nm. The electrocatalyst pyrolyzed at 600 °C showed the best performance and the performance was enhanced when it was supported on BP 2000. The resulting electrocatalyst was composed of 10 nm Co nanoparticles coated by 3–12 layers of N doped graphite layers which as a whole was embedded in a carbon matrix. The ORR performance of the electrocatalyst was tested by rotating disk electrode tests in O2‐saturated 0.1 mol/L KOH under ambient conditions. The electrocatalyst (1.0 mg/cm2) showed an onset potential of 1.017 V (vs. RHE) and a half‐wave potential of 0.857 V (vs. RHE), which showed it was as good as the commer‐cial Pt/C (20μgPt/cm2). Furthermore, the electrocatalyst possessed much better stability and re‐sistance to methanol crossover than Pt/C.     

Recent advances in energy chemistry of precious-metal-free catalysts for oxygen electrocatalysis

The rational design and effective construction of precious-metal-free materials for OER and ORR, respectively, are reviewed in the respects of electronic structure regulation, nanostructure tailor, and freestanding electrode fabrication. This affords fresh concepts for oxygen electrocatalysis and is also enlightening for other energy catalysis with targeted optimization.     

Ruthenium-based electrocatalysts for oxygen reduction reaction—a review

A major impediment to the commercialization of fuel cells is the low activity of electrocatalysts for the oxygen reduction reaction that involves multiple electron transfer steps. Platinum is considered the best cathode catalyst toward oxygen reduction to water; however, Pt remains an expensive metal of low abundance, and it is of great importance to find Pt-free metal alternatives. Among various Pt-free catalysts under development, ruthenium-based compounds show significant catalytic activity and selectivity for four-electron reduction of oxygen to water in acidic environments. This article provides a short review on the different classes of Ru-based catalysts focusing on the catalytically active reaction sites and the oxygen reduction mechanism in acidic media. After a brief discussion of the oxygen reduction kinetics on a pure Ru metal, the paper reviews the catalytic properties of the selected Ru compounds, including crystalline Chevrel-phase chalcogenides, nanostructured Ru and Ru–Se clusters, and Ru–N chelate compounds. This paper is dedicated to Professor Su-Il Pyun, who has pioneered advances in interfacial electrochemistry in the field of corrosion and materials science in South Korea, on the occasion of his 65th birthday.     

ZnCl2辅助制备FeNC催化剂:增加活性位点密度以提高氧还原活性

Fe、N掺杂的碳材料(FeNC)是最有希望取代贵金属用作氧还原反应的催化剂之一.然而,传统FeNC材料制备过程中所采用的高温碳化-蚀刻步骤会造成相邻Fe原子随温度升高而逐渐团聚,形成较大尺寸金属铁单质、铁氧化物或碳化物的聚集颗粒,并在后续酸刻蚀处理中被移出,铁元素损失严重,无法形成有效活性位点.同时高温下含N小分子物质也容易分解并从产物中逸出,导致N元素掺杂量较低.直接焙烧还加重了碳的团聚,造成材料内部孔道有限,比表面积低,活性位难以暴露于三相界面.因此,焙烧处理过程中如何形成Fe、N元素的高含量、均匀分散掺杂,同时构建大量内部联通孔道,是形成高活性Fe NC催化剂的关键.本文采用ZnCl2辅助焙烧方法制备出具有高活性位点密度和大材料孔隙率的Fe NC催化剂;通过TEM、N2吸附和XPS等一系列物理手段对所制备样品进行了形貌、结构及组成表征,提出了ZnCl2辅助催化剂合成机理;结合CV和LSV等电化学测试结果详细探讨了ZnCl2辅助方法对催化剂结构和催化性能的影响.普通共价盐ZnCl2在283–732°C的较宽温度范围内呈现熔融态,同卟啉铁(Fe Pc)碳化温度区间恰好匹配,可以辅助Fe NC催化剂进行元素掺杂和多级孔结构的构建.首先,在熔融状态下,过量的ZnCl2形成分支结构,阻止相邻Fe物种直接接触和聚集,有利于形成高度分散的FeNx活性位点.其次,熔融的ZnCl2像盖子一样包封住催化剂前驱体,避免了挥发性含N小分子的快速逸出,使得N原子在高温下有可能重新在碳骨架中形成掺杂,有助于在材料中保留更高比例的活性N物质.在ZnCl2的辅助下碳化Fe Pc得到的Sphere-FeNC样品具有高达4.37%的总N含量,并且Fe-Nx含量也高达0.71%,分别是不使用ZnCl2制备的对比催化剂FeNC-none的3.2和13倍.同时, ZnCl2辅助合成方法将Fe NC材料的比表面积增加4.5倍,总孔体积增加7倍.三电极氧还原反应性能测试表明, Sphere-Fe NC在碱性和酸性介质的初始电位分别为1.080和1.015 V(vsRHE),半波电位分别为0.906和0.799 V (vs RHE),活性优异.以Sphere-FeNC为阴极催化剂组装的单电池功率达到0.72 W mg–1,高于已报道的Fe NC和Pt/C催化剂.因此, ZnCl2辅助焙烧碳化的方法可以作为一种普适手段用于构建具有高密度活性元素掺杂和大量微孔介孔分布的碳基催化材料,并应用于各类催化反应.     

First principles calculations of oxygen reduction reaction at fuel cell cathodes

The efficiency of solid oxide fuel cells (SOFC) depends critically on materials, in particular for the cathode where the oxygen reduction reaction (ORR) occurs. Typically, mixed conducting perovskite ABO₃-type materials are used for this purpose. The dominating surface terminations are (001) AO and BO₂, with the relative fractions depending on materials composition and ambient conditions.Here, results of recent large-scale first principles (ab initio) calculations for the two alternative polar (La,Sr)O and MnO₂ (001) terminations of (La,Sr)MnO₃ cathode materials are discussed. The surface oxygen vacancy concentration for the (La,Sr)O termination is more than 5 orders of magnitude smaller compared to MnO₂, which leads to drastically decreased estimated ORR rates. Thus, it is predicted for prototypical SOFC cathode materials that the BO₂ termination largely determines the ORR kinetics, although with Sr surface segregation (long-term degradation) its fraction of the total surface area decreases, which slows down cathode kinetics.     

Improved oxygen reduction reaction via a partially oxidized Co-CoO catalyst on N-doped carbon synthesized by a facile sand-bath method

Partially oxidized Co-CoO on N-doped carbon was synthesized via a facile sand-bath route. Co-CoO_x/N-C (SBM) exhibited much O_latt sites and catalytic activity of oxygen reduction action.     

聚苯胺衍生Fe-N-C催化剂在碱性电解质中对氧还原反应的催化性能

经过热解聚苯胺、碳和FeCl₃的混合物制备的Fe-N-C材料在酸性电解质中对氧还原反应表现出高的催化活性;由于材料中不存在任何贵金属, 因而被认为是一类新型非贵金属氧还原催化剂. 然而这类催化剂在碱性电解质中催化氧还原反应的性能如何尚不清楚. 本文使用旋转圆盘电极技术考察了制备的两个Fe-N-C催化剂在KOH水溶液中催化氧还原反应性能, 发现这两个催化剂表现出比无金属的N掺杂碳材料更高的活性. 与商业Pt/C催化剂相比, 它们催化氧还原反应的起始电势和半波电势分别仅低60和40 mV左右, 计时电流测试表明, 它们比Pt/C催化剂显示出更好的稳定性. 此外, 在这两个Fe-N-C催化剂上的氧还原反应主要遵循四电子途径. 本工作显示, Fe-N-C材料有望用于碱性燃料电池氧还原反应催化剂.     

Recent advances in carbon-based electrocatalysts for oxygen reduction reaction

Fuel cells are one of the most promising clean energy devices to substitute for fossil fuel in the future to alleviate energy crisis and environmental pollution.As the key reaction on the cathode in the fuel cells,oxygen reduction reaction(ORR) still requires efficient noble metal catalysts such as the comme rcial Pt/C to boost the reaction for its sluggish kinetics.Therefore,it is critical to design earth-abundant carbonbased catalysts with high efficiency and long-term stability to replace the...     

含氮前驱体对氮杂有序介孔炭材料及其氧还原电催化性能的影响

燃料电池中贵金属铂的大量使用是阻碍其发展的关键因素,亟需探索高效廉价的替代型电催化剂.在目前的替代型非贵金属催化剂研究中,氮杂炭材料是一类氧还原反应催化活性最好、成本最低廉的催化剂,被认为是最有可能取代Pt催化剂而获得实际应用的催化剂.氮杂有序介孔炭材料因具有极高的比表面积和规整的孔道结构,可实现活性位点的密集组装与反应物料的快速传输,受到研究者的广泛关注.本文分别以苯胺、吡咯和邻菲罗啉为含氮前驱体,介孔分子筛SBA-15为硬模板,采用纳米浇铸法成功制备了具有高比表面积的氮杂有序介孔炭材料,系统研究了不同含氮前驱体对氮杂有序介孔炭材料的影响.采用氮气吸附-脱附等温线、透射电子显微镜(TEM)、X射线衍射(XRD)和X射线光电子能谱(XPS)等方法研究了氮杂有序介孔炭的组成与结构,采用循环伏安法(CV)以及线性扫描伏安法(LSV)等手段考察了其电化学行为与氧还原反应极化性能.氮气吸附-脱附等温线结果表明,采用三种不同含氮前驱体制备的氮杂炭材料都对应Ⅳ型吸脱附等温线以及H4型滞后环,表明所制备的氮杂炭材料具有介孔结构.由TEM可以清楚地观察到氮杂炭材料已经成功地反转了SBA-15模板的孔道结构.同时发现,含氮前驱体对氮杂炭材料的比表面积和孔结构产生较大影响:以吡咯和邻菲罗啉为前驱体制备的炭材料C-PY-900和C-Phen-900的比表面积较高,分别为765和746 m2/g,而以苯胺为前驱体制备的炭材料C-PA-900比表面积较小(569 m2/g);三种炭材料平均孔径大小顺序为C-Phen-900 (3.7 nm)＜ C-PY-900 (5.0 nm)＜ C-PA-900 (5.9 nm),这是由于不同含氮前驱体在高温焙烧过程中热分解行为不同所致.XRD结果发现,含氮前驱体对氮杂炭材料的晶型基本没有影响,均为无定形碳.XPS结果表明,采用苯胺、吡咯以及林菲啰啉为前驱体制备的氮杂炭材料中氮含量基本相同,分别为3.13 at％,3.32 at％和3.33 at％,说明在相同热解条件下材料中的氮含量基本不受前驱体的影响,但不同配位环境的氮含量以及氮活化碳原子的含量却有较大差异,其氮活化碳原子的相对含量分别为15.60％,19.87％和23.04％.电化学测试结果表明,三种氮杂介孔炭材料的氧还原反应电催化活性顺序为C-PA-900＜C-PY-900＜C-Phen-900,其H2O2产率低于30％,说明氧还原反应经历4电子转移路径.在碱性条件下,所制氮杂有序介孔炭材料C-PY-900和C-Phen-900表现出较商品Pt/C催化剂更加优异的氧还原反应电催化性能.综上可见,通过改变含氮前驱体的类型可以有效调变氮杂炭材料的比表面积、孔道结构以及N 1s与C 1s化学态,从而调控氧还原反应活性,本文不仅制备出高活性的非贵金属氧还原电催化剂,同时也为高活性炭基电催化剂的可控制备提供了思路.     

Spin polarisation in dual catalysts for the oxygen evolution and reduction reactions

Strongly correlated catalysts can be understood from precise quantum approximations. Incorporating properly electronic correlations thus let’s define Spin rules in catalysis, opening a new door towards optimum compositions for the most important reactions for a sustainable future.     

高质量和深度凹陷的PtPdNi纳米立方体作为高效氧还原反应的催化剂

聚合物电解质燃料电池阴极上的氧还原反应需要使用铂基催化剂,铂是地球上的贵金属之一.采用将不同的金属优化到核心中等多种策略可提高铂基催化剂的活性,从而降低铂的负载量.通过致力于高催化活性Pt2.7Pd0.3Ni凹面立方结构与高指数晶面的复合,表明凹面结构可以提供更多的活性位和高水平的催化活性,如果与其他金属复合,可以降低...