Development and validation of a methodology for uranium radiochronometry reference material preparation

The paper describes a methodology for a reference material preparation to be used for the determination of the production date (i.e. the time elapsed since the last chemical processing) of uranium materials based on the ²³⁰Th/²³⁴U radiochronometer. The reference material was prepared from highly enriched uranium by a complete separation of thorium decay products, thus zeroing the initial daughter nuclide concentration at known time. The complete elimination of thorium from the starting material was verified by gamma spectrometric measurements and by addition of a ²³²Th tracer to the material and its re-measurement in the final product after the separation. The validation of the methodology was carried out subsequently by comparing the ingrown daughter nuclide ²³⁰Th and the measured ²³⁰Th/²³⁴U ratio after recorded times following the last chemical separation with the calculated values obtained on the basis of their respective half-lives. The prepared reference material can be used as a quality control material for age determination of uranium in nuclear forensics and safeguards as well as for method validation.     

Applicability of PIXE to the analysis of biological reference materials

Summary Optimized PIXE procedures were applied to the analysis of up to 18 elements in certified biological reference materials. The exercise indicated that the total random error of the results from one single target analysis is in the range of 2–5% for elements heavier than K and for levels from 2 g/g on. The accuracy of the PIXE procedures is shown to be better than 5%.     

Application of standard materials and standard reference materials in the analysis of lead in blood

Summary Valuable information can be obtained at little expenses from quality control samples prepared in-house to monitor the determination of blood lead by atomic absorption spectrophotometry. Commercially manufactured control materials can also be used for this purpose. These materials are compared to standard reference materials which at present are available.The relative standard deviations for analysis of NBS standard reference materials were 15.4–2.8% (range 60–754 g/l) and in agreement with the relative standard deviation estimated for the analytical method. The corresponding figures for BCR control reference materials were lower: 1.1–1.4% (range 134–795 g/l).The average analytical bias demonstrated by analysis of NBS standard reference material and BCR control reference material were 3–6% (range 795–60 g/l) and in agreement with bias estimated by analysis of commercially manufactured and in-house prepared control materials.     

Application of the ANOVA-PCA method to stability studies of reference materials

Near infrared spectroscopy (NIRS) is an analytical technique that can be very useful for stability studies in particular because of its non destructive analytical capability. However, the spectral interpretation and treatment of this kind of multivariate data remains difficult without the use of chemometrics. In this article, a recent chemometrics method, analysis of variance - principal component analysis (ANOVA-PCA), was used for NIRS stability studies of sunflower and bread wheat external reference materials (ERM). It provided a practical tool for the study of the significance of various storage conditions according to an experimental design. Thus, the effect of the temperature, the nature of the atmosphere in the packaging and the storage duration were tested. ANOVA-PCA highlighted the influence of temperature and storage duration on the stability of the sunflower materials. For the bread wheat materials, the storage conditions did not have a significant effect on stability. Consequently, by applying ANOVA-PCA to near infrared spectral data, the sunflower materials were found to be considered stable for the time length of the study, i.e. 18 months stored in a cold room, while the bread wheat materials were found to be considered stable for the time length of the study, i.e. 12 months under the same conditions.     

Plutonium-244 dating VI. Initial ratios of plutonium to uranium in achondrites

Re-examination of all known xenon isotopic data for achondrites reveals that²⁴⁴Pu fission xenon can be resolved in about three-fourths of the meteorites of this class. The amounts of²⁴⁴Pu fission xenon found in these meteorites range from ca. 1–2 up to 20–40·10^–12 ccSTP/g. These meteorites started to retain their xenon some 200–500 million years later than did the carbonaceous chondrites Allende, Groznaya, Mokoia, Murchison, Murray, and Renazzo, which began to retain their xenon over 4800 million years ago.     

Review of neutron activation analysis in the standardization and study of reference materials, including its application to radionuclide reference materials

Summary Neutron activation analysis (NAA) plays a very important role in the certification of reference materials (RMs) and their characterization, including homogeneity testing. The features of the method are briefly reviewed, particularly aspects relating to its completely independent nuclear basis, its virtual freedom from blank problems, and its capacity for self-verification. This last aspect, arising from the essentially isotopic character of NAA, can be exploited by using different nuclear reactions and induced nuclides, and the possibility of employing two modes, one instrumental (nondestructive), the other radiochemical (destructive). This enables the derivation of essentially independent analytical information and the unique capacity of NAA for self-validation. The application of NAA to quantify natural or man-made radionuclides such as uranium, thorium, ²³⁷Np, ¹²⁹I and ²³⁰Th is discussed, including its advantages over conventional radiometric methods, and its usefulness in providing independent data for nuclides where other confirmatory analyses are impossible, or are only recently becoming available through newer atom counting techniques. Certain additional, prospective uses of NAA in the study of RMs and potential RMs are mentioned, including transmutation reactions, creation of endogenously radiolabelled matrices for production and study of RMs (such as dissolution and leaching tests, use as incorporated radiotracers for chemical recovery correction), and the possibility of molecular activation analysis for speciation.     

Plutonium-244 dating I. Initial ratio of plutonium to uranium in the allende meteorite

Re-examination of all known xenon isotope data for the carbonaceous chondrite Allende reveals that this meteorite contains as much as (22±1)·10^{–1 2} csSTP per gram of fissogenic¹³⁶Xe (^136fXe) from the extinct nuclide²⁴⁴Pu and it appears to have started to retain its xenon more than 4800 million years ago, when the²⁴⁴Pu to²³⁸U ratio in the solar system was 0.113±0.006 (atom/atom).     

Certified reference materials for thermal analysis

Eight inorganic substances recommended by ICTA as temperature standard reference materials for DTA and DSC were studied: KNO₃, KClO₄, Ag₂SO₄, K₂CrO₄, quartz, K₂SO₄, BaCO₃ and SrCO₃. The content of pure component in each of these substances was determined by classical chemical analysis. The temperatures and the heats of polymorphic transformations of these substances were measured with a Perkin-Elmer DSC-2 differential scanning calorimeter, and DTA studies were performed on a MOM 1500 D Q-derivatograph. The plot heat of transformation by DSCvs. DTA peak area is advanced as a calibration line for the approximate estimation of quantitative DTA effects. The substances studied will be certified as temperature standard reference materials for use in DTA and DSC.

---

Zusammenfassung Acht von der ICTA als Temperaturstandard-Referenzmaterialien für DTA und DSC empfohlene und im Lande verfügbare Substanzen wurden untersucht: KNO₃,KClO₄, Ag₂SO₄, K₂Cr₂O₄, Quarz, K₂SO₄, BaCO₃ und SrCO₃. Der Gehalt der Substanzen an diesen Verbindungen wurde klassisch chemisch-analytisch bestimmt. Temperaturen und Enthalpien der polymorphen Umwandlungen wurden mit dem Gerät DSC 2 (Perkin-Elmer) bestimmt, DTA-Untersuchungen erfolgten mittels Derivatograph Q 1500 D (MOM). Eine Darstellung (Umwandlungsenthalpie aus DSC-Messung) über der DTA-peak-Flä-che wird als Eichgerade für die näherungsweise quantitative Bewertung der DTA-Effekte vorgeschlagen. Die genannten Substanzen sollen als Temperaturstandards für DTA und DSC geprüft werden.

---

(-, -, , , , , ), . . -2 -, Q- 1500 . ( ) — . .

     

Rapeseed reference materials for glucosinolate analysis

Summary The use of rapeseed cake is limited by the presence of a number of antinutritional factors the most important of which are glucosinolates. Introduction by EEC of a premium to produce rapeseed with low glucosinolate content has brought the need for reference material and accurate official methods of analysis. This paper summarises the work, begun at the end of 1987, to prepare three batches rapeseed materials (cleaning, mixing and packaging) for an intercomparison of methods. Details are presented of homogeneity and stability studies and the results of the intercomparison are discussed. One of the batches was prepared in sufficient quantity to serve as a reference material and the reference value for the total glucosinolate content of this sample was obtained from the results of the intercomparison.

---

Rapssamen-Referenzmaterial für die GlucosinolatanalyseEntwicklung von Rapeseed BCR RM 190 und Ergebnisse eines Ringversuchs

     

Studies on the age determination of trace plutonium

An isotope dilution multicollector inductive coupled plasma mass spectrometry (ID-MC-ICP-MS) method for determining age of trace Pu through measuring ²⁴¹Pu/²⁴¹Am, ²⁴⁰Pu/²³⁶U ratio was established. At the same time, other two methods-α-spectrometry combined with MC-ICP-MS and liquid scintillator combined with α-spectrometry through measuring ²⁴¹Pu/²⁴¹Am ratio to determine the age of trace Pu were also studied. The techniques were explored for the age determination of nanogram grade Pu sample on the basis of Pu/Am, Pu/U separation. The ages of two Pu samples—one with known and the other with unknown age—were determined by the three methods. The determined ages by the three methods were all in agreement with the reference value. The established methods for determining the age of trace Pu could be adopted in the verification activities of nuclear safeguards and nuclear arms control.     

Development of reference materials for microbiological analysis

The reliability of reference materials (RMs) depends on properties such as fitness, robustness, commutability, stability and homogeneity. The development of RMs for microbiological analysis is especially challenged through questions around the stabilisation and recovery of viable cells, the dispersion of precise numbers of cells, matrix effects and, when using molecular techniques, the presence of nucleic acids (e.g. DNA) of dead and live target organisms. However, RMs are indispensable tools for quality control in microbiological analysis. The Institute for Reference Materials and Measurements (IRMM), as part of the European Commission, concentrates its efforts on the development of RMs to support the development, implementation and monitoring of EU legislation. A special focus is given to highly precise RMs for presence/absence and enumeration tests in microbiological food and water analysis. Another group of new RMs certified by the IRMM comprise DNA-based materials to control the identity of micro-organisms in qualitative assays. All of these activities serve to improve quality control in microbiological analysis. Presented at ‘BERM-10’, April 2006, Charleston, SC, USA.     

Temperature standard reference materials for thermal analysis

The feasibility of the use of potassium nitrate and potassium perchlorate as temperature standards in Differential scanning calorimetry has been studied. The solid-state phase transition temperatures of KNO₃ and KClO₄ were determined by means of DSC. The metrological properties of these salts as calibration materials were examined. The reliability of KNO₃ and KClO₄ calibrations was investigated by twofold determination of the bismuth melting temperature after the apparatus had been calibrated with indium and lead, and with KNO₃ and KCl_O4. Conclusions were drawn concerning the suitability of these salts for use as DSC temperature calibrants.

---

Zusammenfassung Es wurde die Möglichkeit der Verwendung von Kaliumnitrat und Kaliumperchlorat als Temperaturstandard für DSC untersucht. Die Bestimmung der Temperaturen für Feststoff-Phasenumwandlungen von Kaliumnitrat und Kaliumperchlorat wurde mittels DSC erreicht. Weiterhin wurden die meßtechnischen Eigenschaften der untersuchten Salze (KNO₃ und KClO₄) als Bezugssubstanzen geprüft. Die Zuverlässigkeit der Kalibrierung mittels KNO₃ und KClO₄ wurde durch eine zweifache Bestimmung der Schmelztemperatur von Wismut überprüft: einmal nach der Kalibrierung des Gerätes mit Indium und Blei und andererseits nach der Kalibrierung mit Kaliumnitrat und Kaliumperchlorat. Angesichts der Resultate kann man feststellen, daß die untersuchten Salze zur Temperaturkalibrierung in der DSC geeignet sind.

     

Literature survey on thermal analysis reference materials

Results of a literature search on thermal analysis reference materials are listed

---

Zusammenfassung Vorliegend werden die Ergebnisse einer Literaturrecherche über Referenz-substanzen für die thermische Analyse dargelegt.

     

Application of isotope dilution mass spectrometry to research of certified reference materials

This paper briefly describes the method and applications of isotope dilution mass spectrometry(IDMS). Primary standard solutions with various natural isotope abundances were used to certify the concentration of enriched isotope solutions by IDMS. Then these enriched isotopes were used to certify unknown samples by IDMS. Li, K, Mg, Fe, Cu, Ni, Cd, Mo, Pb, etc in CRMs were certified and very good results were obtained in three international comparisons by IDMS. Received: 15 June 2000 Accepted: 26 October 2001     

The importance of reference materials in doping-control analysis

Polyamidoamine (PAMAM) dendrimers and water-soluble 3-mercaptopropionic acid (MPA)-capped CdSe quantum dots (QDs) were combined to produce a new gel containing supramolecular complexes of QDs/PAMAM dendrimers. The formation of the QDs/PAMAM supramolecular complexes was confirmed by high resolution electron microscopy and Fourier transform infrared (FTIR) analyses. Molecular dynamics simulations corroborated the structure of the new QDs/PAMAM-based supramolecular compound. Finally, on the basis of the prominent fluorescent properties of the supramolecular complexes, PAMAM dendrimer was functionalized with folic acid to produce a new QDs/PAMAM-folate derivative that showed an efficient and selective performance as a marker for gastric cancer cells.     

Development of food reference materials for nutritional analysis

Summary The development of five reference materials for major nutritional properties, whole milk powder, pork muscle, wheat and rye flour, and haricots verts beans is described. Homogeneity and stability of these materials proved to be adequate. A preliminary intercomparison of methods showed that results for total fat and total dietary fibre were method dependent. Evaluation of methods used for available carbohydrates revealed poor solubilisation and hydrolysis of starch in some laboratories. This intercomparison has given valuable information for the final certification of these materials.     

The role of reference materials in food analysis

Reliability and accuracy of measurements in food and agricultural materials are essential both for implementation of the legislation concerning public health and consumer protection and for the elimination of disputes arising from trade requirements and technical barriers. In such process the crucial step is represented by the programmes aimed at the quality assurance of analytical data produced by laboratories involved in food analysis. In this framework a major role is played by the proper use of reference materials. This report provides an overview on relevance, availability, use, certification procedures and perspective of reference materials in food analysis. Measurement harmonization procedures are also discussed.     

Gonio-spectrophotometric analysis of white and chromatic reference materials

White and chromatic specimens, including barium sulfate plaque, Spectralon, Everwhite and BCRA tiles, which are used as reference materials, were measured by a gonio-spectrophotometer, and from the spectral directional reflectance factor for each geometric condition, colorimetric values were calculated. These specimens were also measured by a spectrophotometer having an integrating sphere, by specular component including and excluding conditions.

From the results of these measurements, at first, the uniformity of angular distribution of reflected light in a near normal direction, when specimens were illuminated from −45° direction, was examined. Then the spatial distribution of reflected light in a near specular direction for −45° incidence was examined. Specularly reflected components from some kinds of surfaces were spread over a considerably wide range from the regular direction.

Finally, luminous reflectance and chromaticity changes with geometric condition were examined, and colorimetric values under the usual geometric conditions, i.e. d/0, D/0, −45/0 and −7/45, were compared.