Full scale electrokinetic dewatering of waste sludge

Increasing volumes of waste sludge, an intense environmental awareness and stringent legislation impose increasing demands upon conventional sludge dewatering equipment. In this study, the electrokinetic dewatering of waste slurries is studied. Full-scale electrokinetic facilities were developed that were based on a combination of a gravity-driven thickening belt and a belt press. The method was tested at a drinking water production site. By the use of the electrokinetic facility when drying ‘aluminum-coagulated’ drinking water sludge (i.e. coagulated by the addition of Al-ions), the dry solids content increased by electro-osmosis from 17 to 24% m/m at an additional energy consumption level of 60 kWh per ton dry solids. Additionally, the filter belt fouling was reduced drastically and the loss of solid particles from the cake was almost completely suppressed due to electrophoresis. Corrosion of the anode was effectively suppressed by using Ir₂O₃-coated titanium plates. Supplementary laboratory experiments suggest that electrokinetic dewatering is also useful in dewatering ‘iron-coagulated’ drinking water sludge, sewage treatment sludge and fresh water dredging sludge. Theoretical analyses indicate that electro-osmosis will contribute to dewatering significantly, at lower and especially at higher volume fractions of solids, provided the slurry particles are of the order of micrometers or smaller. Under such conditions the conventional dewatering is slow due to excessive hydrodynamic resistance.     

Electrokinetics of soft polymeric interphases with layered distribution of anionic and cationic charges

Soft surface coatings attract increasing attention due to the versatile options they provide in numerous applications e.g. in the flourishing nanomedicine and nanobiotechnology areas. Optimisation of the performance of such ion- and solvent-permeable polyelectrolytic materials requires a detailed understanding of their electrostatic properties. This task is rendered difficult by the inherent non-uniform distribution of their structural charges. In this article, we review recent advances made in the measurement and theory of the electrokinetics (electrophoresis/streaming current) of soft surface coatings that carry spatially-separated cationic and anionic charges. Examples of such charge-stratified systems are polyelectrolyte-coated particles, polyelectrolyte multilayers, particles with zwitterionic interfacial functionality, microbial cells or hard–soft composite interfaces. It is shown here that the electrokinetic features of such colloidal systems are remarkably different from those of their counterparts with homogeneously distributed cationic and anionic charges. In particular, the interplay between electrostatic and hydrodynamic flow fields developed under electrokinetic conditions in the bulk and interfacial compartments of charge-stratified colloids/films are shown to induce a reversal of their electrokinetic response (electrophoretic mobility/streaming current) that depends on the concentration of monovalent electrolyte in solution. The prerequisites for occurrence of such spectacular behaviour are theoretically identified in terms of the Debye length, the spatial length scales defining charge layering, and the typical length for flow penetration within the colloids/films. Electrophoresis and streaming current results recently reported for poly(amidoamine) carboxylated nanodendrimers, natural rubber colloids and poly(ethyleneimine)-supported lipid bilayers are further discussed to illustrate the generic electrokinetic properties of soft interfaces defined by a given stratification of their anionic and cationic structural charges.     

Zeta potential and electroosmotic mobility in microfluidic devices fabricated from hydrophobic polymers: 1. The origins of charge

This paper combines new experimental data for electrokinetic characterization of hydrophobic polymers with a detailed discussion of the putative origins of charge at water-hydrophobe interfaces. Complexities in determining the origin of charge are discussed in the context of design and modeling challenges for electrokinetic actuation in hydrophobic microfluidic devices with aqueous working fluids. Measurements of interfacial charge are complicated by slip and interfacial water structuring phenomena (see Part 2, this issue). Despite these complexities, it is shown that (i) several hydrophobic materials, such as Teflon and Zeonor, have predictable electrokinetic properties and (ii) electrokinetic data for hydrophobic microfluidic systems is most consistent with the postulate that hydroxyl ion adsorption is the origin of charge.     

Effects of fluid slippage on pressure-driven electrokinetic energy conversion in conical nanochannels

The effects of fluid slippage on the pressure-driven electrokinetic energy conversion in conical nanochannels are systematically investigated in this paper. We present a multiphysical model that couples the Planck–Nernst–Poisson equations and the Navier–Stokes equation with a Navier slip condition to fulfill this purpose. We systematically look into the variation of various performance indicators of electrokinetic energy conversion, for example, streaming current, streaming potential, generation power, energy conversion efficiency, regulation parameter, and enchantment ratio, with the conicity of nanochannels and the slip length for two pressure differences of the same magnitude but opposite directions. Particularly, enhancement ratios related to streaming current, streaming potential, generation power, and energy conversion efficiency are defined to comprehensively measure the enhancement of the performance of electrokinetic energy conversion due to the slip length. The results demonstrate that a combination of large slip length and small conicity enhances the electrokinetic energy conversion performance significantly. Furthermore, the fluid slippage-induced enhancement of the electrokinetic energy conversion in the backward pressure difference mode is stronger than that in the forward pressure difference mode. Our results provide design and operation guidelines for pressure-driven electrokinetic energy conversion devices.     

Recent progress in the use of soluble ionic polymers as pseudostationary phases for electrokinetic chromatography

This review concerns the development, characterization, and application of soluble ionic polymeric materials as pseudostationary phases for electrokinetic chromatography since 2002. Cationic polymers, anionic siloxanes, polymerized surfactants (micelle polymers), and chiral polymers are considered. The use of stable suspensions of polymer nanoparticles in electrokinetic chromatography is also reviewed.     

Streaming Potential and Streaming Current Methods for Characterizing Heterogeneous Solid Surfaces

By monitoring changes in electrokinetic parameters, the streaming potential technique has been used as a method of characterizing heterogeneous surfaces, for example, due to protein adsorption. In general it is assumed that the change in the streaming potential is proportional to the degree of heterogeneity. In this study a simple model of the electrokinetic flow through heterogeneous slit channels has been developed with the goal of comparing the streaming potential and streaming current techniques and determining under what conditions the aforementioned proportionality assumption will produce erroneous results. The flow simulations have shown that, when the streaming potential induces significant flow impedance, a severe deviation from the linear assumption is observed. Since streaming current measurements are unaffected by electrokinetic flow effects, more consistent results are predicted and they are preferred for measurements made in small channels. Additionally it has been shown that the distribution of the heterogeneous coverage has a negligible effect on both the streaming potential and the streaming current in cases where the double-layer overlap is not significant. Copyright 2001 Academic Press.     

Recent progress in the development,characterization and application of polymeric pseudophases for electrokinetic chromatography

This review article details the development, characterization and application of polymeric materials as pseudostationary phases for electrokinetic chromatography over the past two years. Recent developments in cationic polymers and anionic siloxane, acrylamide and polymerized surfactants (micelle polymers) are reviewed. Also reviewed is recent progress in the development and characterization of chiral polymeric phases for chiral separations by electrokinetic chromatography, and application of a polymeric pseudophase with electrospray ionization mass spectrometric detection.     

Characterization of oxide layers on Ti6Al4V and titanium by streaming potential and streaming current measurements

Titanium and titanium alloys (e.g. Ti6Al4V) are increasingly used as medical implant materials in a wide variety of applications. So far, many surface properties of the passive layer considered to explain interactions with biological tissues are deduced from those of the crystalline phases of titanium dioxide (anatase, rutile, brookite), but do not necessarily correspond to those of naturally formed amorphous passive layers. We report on streaming potential and streaming current measurements on oxide layers on Ti6Al4V and Ti, carried out using a microslit electrokinetic set-up (MES) and a commercial electrokinetic analyzer (EKA, PAAR). Passive and anodic oxide layers on Ti6Al4V, as well as passive layers on titanium sputtered on glass, were investigated in this study. Isoelectric points (IEP) of ≈4.4 were found for all oxide layers. The IEP of the air-formed passive layer on Ti6Al4V did not depend on the KCl concentration. Hence, it was concluded that IEP is here identical to the point of zero charge (pzc). Controversially, the charge formation process seems to depend on the chloride ion concentration in the neutral and basic pH region.     

Chemical Composition,Structure, and Electrokinetic Potential of Nickel- and Iron-Containing Vitreous Materials

Colloid Journal - The chemical composition, structure, and electrokinetic characteristics have been studied for different vitreous materials, including basic silicate glasses and those modified...     

Developments in the use of soluble ionic polymers as pseudo-stationary phases for electrokinetic chromatography and stationary phases for electrochromatography

This article reviews the development, characterization and application of soluble ionic polymeric materials as pseudo-stationary phases for electrokinetic chromatography and as stationary phases for electrochromatography since 1997. Polymeric pseudo-stationary phases for electrokinetic chromatography, including cationic polymers, anionic siloxane and acrylamide polymers, polymerized surfactants (micelle polymers), and chiral polymers are reviewed. Also reviewed are suspended molecularly imprinted polymer micro-particles. Application of polymeric pseudo-stationary phases with electrospray ionization mass spectrometric detection is presented. Recent progress in the development and characterization of physically adsorbed stationary phases for electrochromatography using polymers of the same or similar chemistry is also reviewed.     

AC electrokinetic isolation and detection of extracellular vesicles from dental pulp stem cells: Theoretical simulation incorporating fluid mechanics

Extracellular vesicles (EVs) are cell-derived nanoscale vesicles involved in intracellular communication and the transportation of biomarkers. EVs released by mesenchymal stem cells have been recently reported to play a role in cell-free therapy of many diseases. However, the demand for better research tools to replace the tedious conventional methods used to study EVs is getting stronger. EVs' manipulation using alternating current (AC) electrokinetic forces in a microfluidic device has appeared to be a reliable and sensitive diagnosis and trapping technique. Given that different AC electrokinetic forces may contribute to the overall motion of particles and fluids in a microfluidic device, EVs' electrokinetic trapping must be examined considering all dominant forces involved depending on the experimental conditions. In this paper, AC electrokinetic trapping of EVs using an interdigitated electrode arrays is investigated. A 2D numerical simulation incorporating the two significant AC electrokinetic phenomena (Dielectrophoresis and AC electroosmosis) has been performed. Theoretical predictions are then compared with experimental results and allow for a plausible explanation of observations inconsistent with DEP theory. It is demonstrated that the inconsistencies can be attributed to a significant extent to the contribution of the AC electroosmotic effect.     

Problems and results of zeta-potential measurements on fibers

A survey is given on both theoretical background and methodical details of zeta-potential measurements on fibers. Electro-osmosis and streaming potential/streaming current measurements can be used in order to obtain correct zeta-potentials. Both measuring principles yield the same values for zeta-potential if the errors due to resistance measurements are avoided. This agreement as well as the independence of zeta-potential of applied voltage (in the case of electro-osmosis) and hydrostatic pressure (in the case of streaming potential/streaming current) point out that the Stern-potential at the boundary immobile/diffuse layer can be determined. Electrophoresis and measurement of other electrokinetic phenomena give values related to but not identical with the zeta-potential. Applications of electrokinetic measurements for investigating fiber problems in production, processing and finishing are reviewed. Parameters determining the zeta-potential of fibers are discussed.Dedicated to Prof. Dr. E. R. Schwarzl with congratulations for his 60th birthday.     

Characterization of chitosan nanofiber fabric by electrospray deposition: electrokinetic and adsorption behavior

Cationic biopolymer nanofiber fabrics were prepared from a chitosan/poly(ethylene oxide) blend solution by electrospray deposition. Their electrokinetic properties and DNA adsorption behavior were analyzed as a function of pH. The zeta potential was determined from streaming potential/streaming current measurements. The adsorption of DNA onto the fabrics was investigated by spectrophotoscopy. The adsorption behavior of DNA correlated well with the electrokinetic properties of the fabrics. This revealed that the electrokinetic approach was a useful option for characterization of novel nanofiber assemblies made by the electrostatic spray process. In addition, these results provided fundamental information about chitosan nanofiber fabrics for both biomedical and analytical applications.     

The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes

The influence of swelling on the rheological and dewatering properties of high consistency nanocellulose based furnishes is considered. Different consistencies of suspensions (1–4 %) and furnishes (5–15 %) were prepared made of two distinctly different grades of nanocellulose containing, micro fibrillated (MFC) and nanofibrillated (NFC) cellulose, and systematic comparison between the rheological and dewatering parameters was conducted. The characterization of the rheological and dewatering properties was performed with a stress controlled rheometer combined with an immobilization cell in parallel plate geometry, as well as with an independent gravimetric dewatering device. The surface charge of nanofibrillated cellulose was found to influence the rheological and dewatering properties of the evaluated suspensions and furnishes due to its impact on swelling and effectively bound water. Due to the complex behavior of the novel materials, the immobilization times were difficult to determine from the changes in the damping factor, as often used for coating colors. Instead, we propose a modified method for determination of immobilization times based on a rheological analysis adopting the rate of change in viscoelastic loss factor over time, d(tan δ = G′′/G′)/dt, describing the critical point(s) in the ratio of the viscous to elastic stress response moduli. With this approach we show that it is possible to characterize immobilization of these materials incorporating the concept of the combined physical interactions of the components and the non-removable bound water, without requiring a direct measure of the nanocellulose surface swelling. Based on the results, we hypothesize that fibrillar swelling impacts the dewatering of MFC and NFC suspensions, and furnishes containing them, by an interfiber pore connectivity blocking/sealing mechanism, which effectively defines the immobilization of the material matrix at the end point of free water extraction caused by the physical blocking imposed by the remaining bound water.     

pH-dependent surface charging and points of zero charge II. Update

Recently published PZC (points of zero charge) of metal oxides and related materials are compiled to update the previous compilations (M. Kosmulski, Chemical Properties of Material Surfaces, Dekker, New York, 2001; J. Colloid Interface Sci. 253 (2002) 77). The electroacoustic method has been widely used; it has become a standard tool, and it has proved to produce IEP (isoelectric points) comparable with those obtained by means of classical electrokinetic methods. The recently published numerical values of PZC/IEP of various materials corroborate the old results, with one exception: the PZC of magnetite found at pH 8 is substantially higher than the values reported in the old literature. New approaches to the electrokinetics of sparingly soluble salts have recently been proposed; e.g., the hysteresis in electrokinetic curves of (nominally) BaTiO3 has been interpreted in terms of changes in the surface stoichiometry caused by leaching.     

Several Key Factors for Efficient Electrocatalytic Water Splitting: Active Site Coordination Environment,Morphology Changes and Intermediates Identification

Water-splitting has emerged as a promising alternative strategy to produce clean hydrogen fuel. However, current electrocatalytic water splitting suffers from sluggish kinetics, thus developing efficient electrocatalysts is crucial. Identifying reaction centers discloses the reaction mechanism and will undoubtedly facilitate the design and optimization of efficient water splitting electrocatalysts. This review summarizes several advances involving the identification of the actual active sites and intermediates capture on the catalytic surface. The morphology and valence states change on 2D materials are chose to illustrate how structural evolution affect catalytic activity. Specifically, in situ/ex situ electron microscopy techniques that used for the characterization of catalytic sites, and spectroscopy techniques that used to detect active intermediates at the molecular level are highlighted. In addition, several perspectives, such as the development of new in situ techniques and electrokinetic analysis methods, are emphasized to shed light on future research.     

Electrokinetic chromatography with polymeric pseudostationary phases

Recent research and development efforts concerning polymeric pseudostationary phases (PSPs) for electrokinetic chromatography are reviewed. The introduction of new materials, characterization of structural effects on performance and selectivity, applications, and the use of polymeric PSPs with mass spectrometric detection are considered. Very interesting results concerning the effects of polymer structure have been reported. Significant developments have also been reported in the development of novel applications of polymeric PSPs, particularly for sample preconcentration using micellar affinity gradient focusing. The use of mass spectrometric detection with electrokinetic chromatography has seen significant development, and recent reports indicate that this is a robust and sensitive approach.     

Surface treatment and characterization: perspectives to electrophoresis and lab-on-chips

The control and modification of surface state is a major challenge in bioanalytical sciences, and in particular in electrokinetic separation methods, due to the importance of electroosmosis. This topic has gained recently a renewed interest, associated with the development of "lab-on-chips" systems that extend the range of materials in which separation channels are fabricated. The surface science community has developed through the years a large toolbox of characterization tools and surface modification protocols, which is not yet fully exploited in the bioanalytical world. In this paper, we try and present an overview of these tools, in order to stimulate new ideas for improved and more controlled surface treatment strategies for separations in capillaries and microchannels. We briefly describe some physical and chemical aspects of electroosmosis (global and spatially resolved), streaming current, and streaming potential. We also review the main strategies for surface coating, and compare the advantages of physisorption, well-organized thin self-assembled monolayers, or conversely thick polymer "brushes". Examples of existing applications to electrophoresis in microchannel are also given.