The adsorption of biogenic amines on the surface of highly dispersed silica from aqueous solutions

The adsorption of some biogenic amines (histamine, tryptamine, and tyramine) on the surface of highly dispersed silica from aqueous solutions is studied as a function of pH and ionic strength. It is established that biogenic amines in a protonated form interact with dissociated silanol groups of SiO₂ surface forming outer-sphere complexes. The constants of the formation of surface complexes are calculated.     

Keto-Enol tautomerization of quercetin in solutions of a cationic surfactant,miramistin

Tautomeric transformations of quercetin in solutions of a cationic surfactant, miramistin, have been spectrophotometrically studied. It has been established that, at pH ≥ 6, monoanions of enol-form quercetin are irreversibly transformed into keto-form monoanions, with the rate of this process depending on surfactant concentration and solution pH. It has been shown that the enol tautomer of quercetin is more stable in aqueous solutions, while the ketone form is stabilized in miramistin-containing media. The apparent dissociation constants have been determined for the enol (pK _a ^a= 6.60) and ketone = 5.64) tautomeric forms of quercetin in micellar solutions of miramistin.     

Adsorption properties of highly dispersed silica with a partially hydrophobic surface

Highly dispersed silica samples with different degrees of substitution of silanol groups by trimethylsilyl groups are obtained by the gas-phase modification method. The adsorption of vitamins B1, B6, and E on initial and modified silica samples is studied. It is shown that the modified adsorbents with degrees of substitution of silanol groups up to 40% exhibit higher affinity to vitamin molecules; in this case, adsorption properties of the modified silica samples depend on the nature of the adsorbate and the number of grafted groups.     

Adsorption of non-ionic and cationic polymers on silica from their mixed aqueous solutions

The adsorption of polyvinylpyrrolidone (PVP) and poly(dimethyldiallylammonium chloride) (PDC) on silica from their mixed aqueous solutions has been investigated as a function of PVP concentration in the presence of PDC. The adsorption of PVP is almost unchanged with the feed concentration of PVP, while the adsorption of PDC decreases with increasing PVP concentration, especially at high concentrations of PDC. The conformation of PVP in the adsorbed layer on silica is relatively flat at low concentrations of PDC, but is extended in solution at high concentrations of PDC. The stability of the silica dispersion is low and the ζ potential is relatively small at low concentrations of PDC, whereas a stable dispersion is obtained at high concentrations of PDC and the ζ potential is large. Thus the stability of the dispersion is well correlated with the electrostatic repulsion and steric repulsion forces operating at the particles.     

Adsorption of cinnamic and caffeic acids on the surface of highly dispersed silica from different solvents

The adsorption of cinnamic and caffeic acids on initial and partially silylated highly dispersed silica A-300 from polar (water-ethanol solution), low polar (chloroform and dichloroethane), and apolar (hexane and carbon tetrachloride) solvents is investigated. The dependence of adsorption on solvent polarity is established. It is disclosed that the dependences of the adsorption of cinnamic and caffeic acids on the degree of surface hydrophobization have different characters.     

Adsorption of organic anions from aqueous solutions by layered silicates modified with cationic surfactant

The interaction of anionic organic dyes with layered silicates (kaolinite and hydromica) both natural and modified with a cationic surfactant (cetylpyridinium bromide) is studied by adsorption and spectral methods. The adsorption of organic anions by modified silicates is proved to proceed via the formation of ionic associates of these adsorbates with the modifier. It is found that the interaction of large organic anions with the modifier results in the desorption of the latter, followed by its secondary adsorption in the form of ionic associates with the adsorbates. The selectivity of layered silicates modified with the cationic surfactant to organic anionic dyes is determined by the stability of the formed dye/modifier ionic associates and their affinity to the surface. These factors depend on the sizes of the hydrocarbon moieties of both components of the associates. Therefore, the selection of a suitable modifier allows one to control the selectivity of modified minerals to different organic anions. Using long-chain organic cations as modifiers, organic anions of any sizes can be extracted from aqueous solutions.     

Adsorption of benzethonium chloride from aqueous solutions on dispersed adsorbents

The adsorption of benzethonium chloride from aqueous solutions on the surface of finely dispersed particles of aluminum oxide, titanium dioxide, and zirconium dioxide is investigated. The ratio of the amount of adsorbed benzethonium chloride molecules to the amount of surface hydroxyl groups as potential adsorption sites is proposed to be used for characterizing the structure of adsorption layers. It is shown that the formation of supramolecular structures of benzethonium chloride molecules on solid surfaces begins when its concentrations in suspensions is significantly lower than the critical micellization concentration. It is established that benzethonium chloride is adsorbed via simultaneous interaction of the surfactant molecules with the surface hydroxyl groups and hydrophobic interaction of their hydrocarbon tails; the amounts of molecules adsorbed as a result of these interactions depend on both benzethonium chloride concentration in a solution and the density of the hydroxyl groups on an oxide surface.     

Wetting films on a hydrophilic silica surface obtained from aqueous solutions of hydrophobically modified inulin polymeric surfactant

The thickness of wetting films on a hydrophilic silica surface was investigated using a microinterferometric technique. Aqueous solutions of hydrophobically modified inulin (INUTEC^®SP1) at various concentrations, in the presence or absence of NaCl or Na₂SO₄, were studied. The equilibrium film thickness (h _eq) showed a complex dependence on INUTEC^®SP1 concentration. At low electrolyte concentrations, h _eq decreased with an increase in INUTEC^®SP1 concentration, reaching a minimum at 10^?6 mol dm^?3. However, at high electrolyte concentrations, this dependence became less pronounced. At any given INUTEC^®SP1 concentration, the equilibrium film thickness decreased with an increase in electrolyte concentration as a result of the compression of the electrical double layer reaching a minimum value. After that, the film thickness showed a small decrease with further increase in electrolyte concentration. This indicates that the electrostatic component of disjoining pressure can be neglected, and the steric repulsion of the loops and tails of INUTEC^®SP1 determined the film thickness.     

Adsorption of hydrophilic-hydrophobic block copolymers on silica from aqueous solutions

Adsorption of a water-soluble diblock copolymer, poly(t-butylstyrene)-sodium poly(styrene sulfonate) (PtBS-NaPSS), on silica surfaces in aqueous solutions was studied using ellipsometry and atomic-force microscopy (AFM). Molar masses of 87 000 and 160 000 g/mol were used. The block copolymers used were compositionally asymmetric, with large, hydrophilic, PSS blocks and small, hydrophobic, PtBS blocks. Adsorption could not be observed in pure water without added salt. When the NaCl concentration was increased to 1 mol/L, adsorption could be readily observed. The measured adsorbed amount at long times was significantly larger for the 87 000 diblock compared with that for a polyelectrolyte homopolymer of comparable molecular size, demonstrating the role played by the uncharged block in anchoring the diblock at the solid surface. The kinetics of adsorption showed a two-stage process, an initial diffusion-limited stage, followed by a slower buildup of surface coverage in a brush-limited stage. The number density of molecules at the surface was smaller for the higher molecular weight species, in agreement with simple scaling arguments.     

Effect of supramolecular interactions with cationic surfactants on adsorption of flavonoids on highly dispersed silica surface

The effect of the cationic surfactants decamethoxine and miramistin on the physicochemical properties of the natural flavonoids quercetin and rutin is studied spectrophotometrically in the range of physiological pH values. It is established that the interaction with these cationic surfactants changes the spectral characteristics of the flavonoids in solutions and essentially increases their adsorption on the surface of highly dispersed silica as compared with their aqueous solutions. It is shown that the efficiency of flavonoid adsorption from decamethoxine and miramistin solutions is governed by solution pH, flavonoid hydrophobicity, and the nature of a cationic surfactant.     

Dewetting behavior of aqueous cationic surfactant solutions on liquid films

Previous experimental work has shown that the spreading of a drop of aqueous anionic surfactant solution on a liquid film supported by a negatively charged solid substrate may give rise to a fingering instability (Afsar-Siddiqui, A. B.; Luckham P, F.; Matar, O. K. Langmuir 2003, 19, 703-708). However, upon deposition of a cationic surfactant on a similarly charged support, the surfactant will adsorb onto the solid-liquid interface rendering it hydrophobic. Water is then expelled from the hydrophobic regions, causing film rupture and dewetting. In this paper, experimental results are presented showing how the surfactant concentration and film thickness affect the dewetting behavior of aqueous dodecyltrimethylammonium bromide solutions. At low surfactant concentrations and large film thicknesses, the film ruptures at a point from which dewetting proceeds. At higher concentrations and smaller film thicknesses, the ruptured region is annular in shape and fluid moves away from this region. At still higher concentrations and smaller film thicknesses, the deposited surfactant forms a cap at the point of deposition that neither spreads nor retracts. This variation in dewetting mode is explained by considering the relative Marangoni and bulk diffusion time scales as well as the mode of assembly of the surfactant adsorbed on the solid surface.     

Adsorption of atrazine from aqueous electrolyte solutions on humic acid and silica

The adsorption of, the still widely used, herbicide atrazine on model soil components, such as humic acid and humic acid-silica gel mixtures, was investigated in a series of batch experiments, under different experimental conditions (ionic strength, temperature, and pH). The investigation aimed at obtaining an estimate of the contribution of each of the soil components on the adsorption of atrazine from aqueous solutions. The kinetics of atrazine adsorption on humic acid showed two steps: a fast step, of a few hours duration, and a second slow step, which continued for weeks. The kinetics of adsorption data gave a satisfactory fit to the Elovich equation. Τhe adsorption of atrazine on the test substrates was found to be reversible in all cases. The atrazine uptake data on the test substrates were fitted best with the Freundlich adsorption isotherm. The ionic strength of the atrazine aqueous solutions did affect the amount of the atrazine adsorbed on the test substrates, suggesting that electrostatic forces between atrazine molecules and soil play a significant role in the adsorption process. An increase of temperature resulted in a decrease of atrazine adsorption on humic acid at low atrazine equilibrium concentrations. However, for higher levels of equilibrium concentrations (≥3 mg/L) the amount of atrazine adsorbed onto the test substrate increased as temperature increased. The calculated isosteric enthalpies of adsorption ranged between slightly exothermic at low atrazine uptake and slightly endothermic at high atrazine uptake, all values being in the range of physisorption.     

The adsorption of amino acids on the surface of highly dispersed silica

The adsorption of arginine, histidine, lysine, and ornithine on the surface of highly dispersed silica from aqueous solutions was studied as a function of pH. The equilibrium constants of the formation of surface complexes were calculated using the Stern model for the electrical double layer. It was shown that the possibility of adsorption of amino acids on the silica surface is determined by the presence of additional basic groups in their molecules.Translated from Kolloidnyi Zhurnal, Vol. 66, No. 6, 2004, pp. 733–738.Original Russian Text Copyright © 2004 by Vlasova, Golovkova.     

Equilibrium surface tension of aqueous surfactant solutions

Summary The applicability of the drop weight method for determining time dependent surface tension of surfactant solutions was experimentally proved.The presence of CO₂ and traces of lauryl alcohol and long chain homologs lower the surface tension of sodium dodecyl sulfate solutions in a measurable extent. The chemical purification of materials and recrystallizations are insatisfactory to obtain sufficient purity; the cleaning of the surface itself is needed by e.g. foaming. The equilibrium surface tension of pure surfactant solutions that is often required to interpret interfacial phenomena and to calculate theGibbs adsorption excess can be determined with reliable accuracy by linear extrapolation to zero time from measurements made in function of time up from 1 minute on moderately contaminated solutions.As a criterion of surface purity the time dependence of surface tension and the average life-time of thin liquid film are suggested.

---

Zusammenfassung Die Tropfengewichtsmethode eignet sich auch zur Bestimmung der zeitabhängigen Oberflächenspannung wäßriger Tensidlösungen. Zur Entfernung von Verunreinigungen, die die Oberflächenspannung von Natriumdodecylsulfatlösungen herabsetzen, wie Spuren von Laurylalkohol und höheren Homologen, reichen weder chemische Methoden noch wiederholtes Umkristallisieren aus, sondern die Oberfläche selbst ist zu reinigen, z. B. durch Ausschäumen. Der Gleichgewichtswert der Oberflächenspannung läß sich mit hinreichender Genauigkeit berechnen, in dem man die an mäßig konzentrierten Lösungen über einer Minute Meßzeit gewonnenen Daten auft = 0 linear extrapoliert. Als praktisches Kriterium für die Reinheit der Oberfläche kann man sowohl die Zeitabhängigkeit der Oberflächenspannung, wie auch die mittlere Lebensdauer von dünnen Lösungsfilmen heranziehen.

---

---

With 6 figures     

Adsorption and kinetic studies of cationic and anionic dyes on pyrophyllite from aqueous solutions

The adsorption of cationic Methylene Blue (MB) and anionic Procion Crimson H-EXL (PC) dyes from aqueous medium on pyrophyllite was studied. Changes in the electrokinetics of pyrophyllite as a function of pH were investigated in the absence and presence of multivalent cations. The results show that pyrophyllite in water exhibits a negative surface charge within the range pH 2-12. Pyrophyllite is found to be a novel adsorbent for versatile removal of cationic and anionic dyes. The negative hydrophilic surface sites of pyrophyllite are responsible for the adsorption of cationic MB molecules. The adsorption of anionic PC dye is possible after a charge reversal by the addition of trivalent cation of Al. Nearly 2 min of contact time are found to be sufficient for the adsorption of both dyes to reach equilibrium. The experimental data follow a Langmuir isotherm with adsorption capacities of 70.42 and 71.43 mg dye per gram of pyrophyllite for MB and PC, respectively. For the adsorption of both MB and PC dyes, the pseudo-second-order chemical reaction kinetics provides the best correlation of the experimental data.     

亚砜类非离子型表面活性剂在固/液界面上的吸附I: 硅胶/水溶液界面上的吸附

测定了癸基和辛基-甲亚基亚砜在硅胶/水溶液界面的吸附以及溶液在石英界面的接触角. 研究了温度和pH值对吸附的影响. 吸附等温线似应归入Giles分类的L4型. 饱和吸附层的平均分子面积为27-30A^2. 二个同系物的γ/γ-c/cmc曲线彼此重叠. 吸附温度系数在低浓度范围是负性的在高浓度范围是正性的. 接触角的测量表面吸附使硅胶表面疏水. 从实验结果考虑到吸附过程由二个阶段组成: 一是在低浓度范围由固体表面和亚砜基之间的相互作用, 另一过程是在高浓度范围中, 被吸附的表面活性剂分子及其在溶液中的疏水作用.     

Adsorption of nonionic surfactant triton X-100 on solids from aqueous and nonaqueous solutions

The adsorption of nonionic surfactant Triton X-100 on quartz sand and methylated quartz sand from water and toluene was investigated by means of spectrophotometry, the radiotracer technique, and wetting angle measurements.     

Synthesis and formation of hierarchical mesoporous silica network in acidic aqueous solutions of sodium silicate and cationic surfactant

Synthesis and formation of hierarchical mesoporous silica network in acidic aqueous solutions of commercial sodium silicate and cationic surfactant were studied by SEM, TEM, XRD and nitrogen adsorption-desorption methods. The formation process occurs through several steps, involving (1) formation of mesoporous silica nanoparticles; (2) aggregation of mesoporous silica nanoparticles into blocks; (3) growth of silica nanorods in closely-packed arrays by merging of silica nanoparticles; (4) separation of the nanorods to form 3D silica network; and (4) shrinking of the mesoporous silica network. The as-prepared 3D silica network exhibits bimodal morphology constituting mesoporous and macroporous phases.     

Interaction of cationic surfactant and anionic polyelectrolytes in mixed aqueous solutions

Surfactant–polymer interactions in aqueous solutions have been studied using dynamic surface tension, polyelectrolyte titration, nephelometric turbidity, and dynamic light scattering. For the preparation of complexes, a technical cationic surfactant was used in combination with two poly(maleic acid-co-polymers) of similar structure but different hydrophobicity. The dynamic surface tensions of mixed solutions as functions of surfactant concentration at constant polyelectrolyte content, as well as changes in the surface activity due to the influence of polyanion at constant surfactant concentration are discussed in terms of a complex or aggregate formation in the bulk phase. The interaction of the surfactant with poly(maleic acid-alt-propene) (P-MS-P) and poly(maleic acid-alt--methylstyrene) (P-MS-MeSty), respectively, is strong in both cases and results in the formation of nanoparticles with properties depending on the composition of the corresponding mixture.