Removal of phosphate by aluminum oxide hydroxide

The development and manufacture of an adsorbent to remove phosphate ion for the prevention of eutrophication in lakes are very important. The characteristics of phosphate adsorption onto aluminum oxide hydroxide were investigated to estimate the adsorption isotherms, the rate of adsorption, and the selectivity of adsorption. Phosphate was easily adsorbed onto aluminum oxide hydroxide, because of the hydroxyl groups. The adsorption of phosphate onto aluminum oxide hydroxide was influenced by pH in solution: the amount adsorbed was greatest at pH 4, ranging with pH from 2 to 9. The optimum pH for phosphate removal by aluminum oxide hydroxide is 4. The selectivity of phosphate adsorption onto aluminum oxide hydroxide was evaluated based on the amount of phosphate ion adsorbed onto aluminum oxide hydroxide from several anion complex solutions. It is phosphate that aluminum oxide hydroxide can selectively adsorb. The selectivity of phosphate onto aluminum oxide hydroxide was about 7000 times that of chloride. This result indicated that the hydroxyl groups on aluminum oxide hydroxide have selective adsorptivity for phosphate and could be used for the removal of phosphate from seawater.     

Interaction of Water and Methanol Molecules with the Surface of Carbonaceous Materials According to Gas Chromatographic Data

We have used gas chromatography to study the interaction of water and methanol molecules with active hydrophilic centers on the surface of thermally expanded graphite and graphitized thermal carbon black. We have determined the concentration of carboxyl and phenol hydroxyl groups on the surface of the sorbents and the heats of adsorption for adsorption of the studied substances on these groups. We have shown that water molecules are adsorbed as clusters on the hydrophilic centers of the studied sorbents at very low relative pressures, with n = 2 molecules in the cluster.     

Adsorption equilibriums in a silica-poly(vinyl alcohol)-gelatin system

The interaction of gelatin with nonporous nanosized amorphous silica containing poly(vinyl alcohol) (PVA) preliminarily adsorbed on its surface is studied. It is established that the modification of the nanosilica via PVA adsorption does not influence its ability to adsorb the protein. It is shown that, during adsorption, gelatin partly displaces PVA molecules from the silica surface. It is assumed that hydroxyl groups of strongly retained PVA macromolecules may play the role of active sites of protein adsorption along with free silanol groups.     

Removal of arsenious ion by calcined aluminum oxyhydroxide (boehmite)

Aluminum oxyhydroxide (boehmite, BE) shows adsorption ability of arsenious ion. In this study, we calcined BE in the temperature range 200-1150 degrees C, and examined the amount of arsenious ion adsorbed and adsorption mechanism. As a result, the adsorption amount of arsenious ion by BE calcined at 400 degrees C showed the highest value as compared with those by BE calcined at other temperatures. On the other hand, the amounts of arsenious ion adsorbed onto BE showed lower values at 200, 600, and >1000 degrees C than that by BE before calcination. The amount of surface hydroxyl group of calcined BE showed the highest value at the calcination temperature of 400 degrees C. As a result of X-ray analysis, BE showed boehmite structure at less than the calcination temperature of 300 degrees C, while BE was converted to the transitional state of aluminum oxide at more than 400 degrees C. From the result of the amount of arsenious ion adsorbed and FT-IR, it turned out that calcined BE dissociated water molecule when suspended in the water, hydroxyl group was generated on the surface, and the amount of arsenious ion adsorbed was increased because of the ion exchange of these hydroxyl groups with arsenious ions. It was clarified that an adsorbent with high adsorption ability of arsenious ion was obtained by calcination of BE.     

ATR-IR spectroscopic study of antimonate adsorption to iron oxide

Antimonate ions adsorb to iron oxides in mining contexts, but the nature of the adsorbed antimonate species has not frequently been investigated. In this study, ATR-IR spectroscopy was used to reveal that the adsorption of Sb(OH)6- ion from aqueous solutions onto an amorphous iron oxide particle film is accompanied by changes in the Sb(OH)6- spectrum and the loss of OH stretching absorptions from iron oxide surface hydroxyl groups. These spectral changes upon adsorption imply an inner-sphere surface interaction with the formation of Sb-O-Fe bonds as well as some outer-sphere adsorption. The corresponding results from solutions of antimonate in D2O confirm that chemisorption occurs. The dependence of antimonate adsorption on pH in the range from 8 to 3 follows that expected for anions on iron oxide considering its pH-dependent surface charge, with the greatest amount of adsorbed antimonate at pH 3. The study of adsorption/desorption kinetics showed a more rapid desorption of adsorbed antimonate under alkaline conditions. This trend is expected from the pH dependence of the antimonate charge and iron oxide surface charge, but it might be partly due to the fact that high pH favors hydrolysis of antimonate oligomers formed on the iron oxide surface from adsorption under acidic conditions.     

Nonideal mixing of alkylammonium chloride and decyldimethylphosphine oxide surfactants in adsorbed films and micelles

Miscibility and interaction of decyldimethylphosphine oxide (DePO) with ammonium chloride (AC), hexylammonium chloride (HAC), and dodecylammonium chloride (DAC) in adsorbed films and micelles were studied by surface tension measurements. Phase diagrams were drawn for the mixed adsorption, mixed micelle formation, and equilibrium between adsorbed films and micelles. Nonideal mixing of DAC and DePO was characterized by a negative excess Gibbs free energy and positive excess area of adsorption and negative excess Gibbs free energy of micelle formation. It is concluded that the interaction between DAC and DePO in adsorbed films and micelles is larger than those between the same surfactants alone due to two factors: ion-dipole interactions between the head groups of DAC and DePO and alkyl-chain/alkyl-chain interactions.     

An experimental and molecular simulation study of the adsorption of carbon dioxide and methane in nanoporous carbons in the presence of water

The adsorption of carbon dioxide and methane in nanoporous carbons in the presence of water is studied using experiments and molecular simulations. For all amounts of adsorbed water molecules, the adsorption isotherms for carbon dioxide and methane resemble those obtained for pure fluids. The pore filling mechanism does not seem to be affected by the presence of the water molecules. Moreover, the pressure at which the maximum adsorbed amount of methane or carbon dioxide is reached is nearly insensitive to the loading of preadsorbed water molecules. In contrast, the adsorbed amount of methane or carbon dioxide decreases linearly with the number of guest water molecules. Typical molecular configurations obtained using molecular simulation indicate that the water molecules form isolated clusters within the host porous carbon due to the nonfavorable interaction between carbon dioxide or methane and water.     

甲醇在氧化锌表面吸附的研究

摘要用原位红外和脉冲实验研究了甲醇在氧化锌表面的吸附行为. FTIR结果表明, 甲醇吸附于氧化锌上易生成甲氧基, 且其生成量随着吸附温度的提高而增加. 进一步的研究结果表明, 甲氧基是由甲醇同氧化锌表面的羟基反应生成的, 将其暴露于水蒸汽中后很快消失. 脉冲实验发现, 氧化锌上脉冲甲醇时产生水, 再脉冲水则产生甲醇. 因此甲醇在氧化锌表面吸附生成甲氧基和水的反应是可逆的.     

Effects of carboxyl groups on the adsorption behavior of low-molecular-weight substances on a stainless steel surface

The adsorption isotherms of various carboxylic acids and several amines on a stainless steel surface were taken as a function of pH and the ionic strength of the solution at 30 degrees C. In particular, the effect of the number of carboxyl groups on the adsorption behavior was investigated. Monocarboxylic acids such as benzoic acid and n-butyric acid were reversibly adsorbed on the stainless steel particles and showed a Langmuir-type adsorption isotherm, i.e., Q=KqmC/(1+KC), where Q and C are, respectively, the amount of adsorbate adsorbed and the equilibrium concentration in the bulk solution, qm, the maximum adsorbed amount, and K is the adsorption equilibrium constant. Carboxylic acids having plural carboxyl groups had much higher affinity to the surface and were adsorbed in both reversible and irreversible modes. The adsorption isotherms for the carboxylic acids having plural carboxyl groups could be expressed by a modified Langmuir-type adsorption isotherm, i.e., Q=q(irrev)+Kq(rev)C/(1+KC), where q(irrev) and q(rev) are, respectively, the maximum amounts adsorbed irreversibly and reversibly. The K and q(irrev) values increased with an increase in the number of carboxyl groups except for isophthalic acid and terephthalic acid. On the basis of the pH dependencies of K, qm, q(irrev), and q(rev) as well as the surface properties of the stainless steel, both reversible and irreversible adsorptions were considered to occur through the electrostatic interaction between negatively charged carboxyl groups and the positively charged sites on the surface. The dependency of the q(irrev) value on ionic strength was discussed on the basis of the differences in their adsorbed state with the interaction forces to the surface and repulsive forces among the adsorbed molecules. The adsorption of amine components was quite weak. The RA-IR and molecular dynamics calculation were done to investigate the adsorption states of phthalic acid, trimellitic acid, and mellitic acid.     

Microcalorimetric Study of Water Adsorption on Initial and Polyfluoroalkylated Silicas

Water adsorption on initial and modified Silochrom samples was studied by the adsorption calorimetry. Integral heats of immersional wetting by water were measured simultaneously. It was shown that hydroxyl groups both free and sterically screened by a modifier remain on the modified Silochrom surface. Concentrations of these groups and OH groups chemically interacted with the modifier were estimated. The heat of reaction of water molecules with a free surface OH groups of modified sorbents was determined (≈60 kJ/mol). It was found that the modifying layers of the sorbents are getting loose under the effect of adsorbed water, and water molecules gain access to the sterically screened OH groups; the heat of water interaction with these groups is 54–55 kJ/mol. The energy is consumed for getting the modifying layers loose and the rupture of point contacts between Aerosil particles of the secondary structure of both initial and modified Silochrom that significantly affects the heat of immersion, the differential heat of adsorption, the form of the heat release curve, and the dependence of the differential heat on the adsorption value.     

\begin{document}$ \mathit{{Ab}} $\end{document} \begin{document}$ \mathit{{initio}} $\end{document} Molecular Dynamics Study of Adsorption of Hydroxyl Groups on Graphene Surface

Reduced graphene oxide is the precursor to produce graphene in a large scale; however, to date, there has been no consensus on the electronic structure of reduced graphene oxide. In this study, we carried out an \begin{document}$ ab $\end{document} \begin{document}$ initio $\end{document} molecular dynamics simulation to investigate the adsorption process of hydroxyl groups on graphene surface. During the adsorption process, the OH group needs to firstly pass through a physical adsorption complex with the OH above the bridge site of two carbon atoms, next to surmount a transition state, then to be adsorbed at the atop site of a carbon atom. With a 5\begin{document}$ \times $\end{document}5 graphene surface, up to 6 hydroxyl groups can be adsorbed on the graphene surface, indicating the concentration coverage of the hydroxyl groups on graphene surface is about 12%. The simulation results show that the negative adsorption energy increases linearly as the number of adsorbed hydroxyl groups increases, and the band gap also increases linearly with the number of adsorbed hydroxyl groups.     

Adsorption and adsolubilization of surfactants on titanium dioxides with functional groups

Adsorption of ionic surfactants on titanium dioxide with dodecyl chain groups or quaternary ammonium groups (XNm, where m is the carbon number of the alkyl chain, 4–16) was investigated. The adsorbed amount of cationic surfactants (dodecyltrimethylammonium bromide, DTAB; 1,2-bis(dodecyldimethylammonio)ethane dibromide, 2RenQ) on titanium dioxide with dodecyl chain groups increased with increasing concentration of the dodecyl chain due to hydrophobic interaction, where the adsorbed amounts of DTAB at saturation was considerably greater than those of 2RenQ. Adsorption of an anionic surfactant (sodium dodecyl sulfate, SDS) on XNm occurred mainly due to both electrostatic attraction force and hydrophobic interaction, depending on the alkyl chain length on XNm. On the other hand, adsorption of cationic surfactants, DTAC and 2RenQCl (their counter ions are chloride ions), on XNm was quite smaller compared with that of SDS due to electrostatic repulsion force. Adsolubilization of 2-naphthol in the surfactant-adsorbed layer on the titanium dioxides with the functional groups was also studied. The adsolubilized amounts of 2-naphthol on titanium dioxide with dodecyl chain groups were enhanced by adsorption of DTAB, but no distinct increase in the adsolubilization was observed by adsorption of 2RenQ. In the case of XNm, the amount of 2-naphthol adsorbed in the absence of surfactants increased with increasing alkyl chain length on XNm. Further, an appreciable increase in the adsolubilization of 2-naphthol on XNm with adsorption of 2RenQCl was observed. It was found from the admicellar partitioning coefficients that the adsolubilization of 2-naphthol preferably occurs on XNm by adsorption of SDS or 2RenQCl compared with that by DTAC. These differences in the adsolubilization were discussed by microproperties of the surfactant-adsorbed layers estimated using a spin probe.     

Hydrogen-bonded macrocluster formation of ethanol on silica surfaces in cyclohexane(1)

Adsorption of ethanol onto silica surfaces from ethanol-cyclohexane binary liquids was investigated by a combination of colloidal probe atomic force microscopy, adsorption excess isotherm measurement, and FTIR spectroscopy using the attenuated total reflection (ATR) mode. An unusually long-range attraction was found between the silica (glass) surfaces in the presence of ethanol in the concentration range of 0.1-1.4 mol % at room temperature. At 0.1 mol % ethanol, the attraction appeared at a distance of 35 +/- 3 nm and turned into a repulsion below 3.5 +/- 1.5 nm upon compression. Half of the attraction range agreed with the adsorption layer thickness estimated from the adsorption excess amount by assuming that the adsorption layer was composed only of ethanol. This indicated that the observed long-range attraction was caused by the contact of opposed adsorption layers of ethanol on the silica surfaces and that the sharp increase of repulsion at shorter distance was caused by the overlap of structured ethanol clusters adjacent to the surface. ATR-FTIR spectra demonstrated that ethanol adsorbed on the silica (silicon oxide) surfaces formed hydrogen-bonded clusters (polymers). Practically no ethanol clusters were formed on the hydrogen-terminated silicon surface. These results indicated that the cluster formation involved hydrogen-bonding interactions between surface silanol groups and ethanol hydroxyl groups in addition to those between ethanol hydroxyl groups. At higher temperatures (30-50 degrees C), the range and the strength of attraction decreased owing to the decrease in the hydrogen-bonded clusters monitored by FTIR spectroscopy, reflecting the nature of hydrogen bonding. The range and the strength of the attraction also changed when the ethanol concentration increased: The long-range attraction started to decrease at 0.6 mol % ethanol at room temperature and disappeared at 1.4 mol % while the adsorption excess amount remained almost constant as did the FTIR peak intensity of the hydrogen-bonded OH group of adsorbed ethanol. In the bulk solution, ethanol clusters appeared at 0.5 mol % ethanol; thus, this change in the attraction could be accounted for in terms of the exchange of ethanol molecules between the surface clusters and bulk clusters. The novel self-assembled structure of alcohol on the surface, found in this study may be called a "surface molecular macrocluster" because the hydrogen-bonded clusters extend to distances of ca. 20 nm longer than the typical sizes of common clusters, 2-4 nm, of alcohol (e.g., ethanol).     

木质素磺酸钠在氧化铁表面的吸附驱动力

研究吸附介质的pH值、 尿素及盐类对木质素磺酸钠(SL)在氧化铁表面吸附性能的影响规律, 结果表明, 络合能力较强的柠檬酸钠使SL的吸附量几乎减少至零, 较弱络合能力的亚硫酸钠使SL的吸附量具有一定程度的降低, 而无络合能力的硫酸钠增大了SL的吸附量. 说明SL的羧基与氧化铁之间的络合吸附驱动力对吸附起主导作用, 磺酸基对其在氧化铁上吸附的影响很弱. 采用氯化锂屏蔽部分羧基后SL在氧化铁上的吸附量也有所降低, 进一步证明了羧基与氧化铁表面的络合作用是其吸附的主要驱动力.     

Preparation of Functional Fluorescent Microspheres Used for HTS and Their Interaction with Biomolecules

There is considerable interest in protein adsorption onto microspheres because of its importance in a wide range of biomedical applications, such as artificial tissues and organs, drug delivery systems, biosensors, solid-phase immunoassays, immunomagnetic cell separation and immobilized enzymes or catalyst. It has been well known that the interaction between proteins and microspheres plays important roles in this process. Major interaction involved in the adsorption can be classified as electrostatic, hydrophobic and hydrogen-bonding. Indeed, adsorption of proteins onto microspheres is a complex process and often can involve many dynamic steps, from the initial attachment of the protein on the surface of microspheres to the equilibrium. Also the conformation of proteins probably occurs to a certain degree of deformation or structural change due to the large area of contact. Recently, much interest has been shown in sulfonated microspheres, since sulfonate-group itself is one of components in bio-bodies, as well as is sensitive to the change of pH or ionic strength. Indeed, so far, scanty investigations have been performed in the full range. Also few researches have involved the data on adsorption rate and the maximum amount of protein adsorbed, or the reversibility of the process and conformational change of protein adsorbed as well.In present study, BSA (bovine serum albumin) was chosen as the model protein and sulfonated PMMA [poly(methyl methacrylate)] microspheres as the matrix to investigate the adsorption process.The purpose is to show some information especially the intrinsic information involved by the adsorption process Adsorption of BSA onto sulfonated microspheres (MS) has been investigated as a function of time, protein concentration and pH. The adsorption appears to be a reversible process and the presence of sulfonate groups can play important roles in the adsorption process, so as to increase the amount of protein adsorbed and influences the interaction of BSA molecules. Fig. 1 also shows that the reciprocation between unadsorbed and adsorbed BSA or rearrangement of adsorbed BSA molecules does not produce visible change in the properties of the adsorbed protein. Close to the isoelectric point of BSA (pI 4.7), the amount of protein adsorbed exhibits a maximum. A higher or lower pH results in the significant decrease of the adsorption amount. This is related to the dependence of BSA conformations at different pH conditions.     

Interaction of Langmuir–Blodgett Layers Bearing Amino Groups with Sulfur Dioxide

The adsorption of SO₂ on thin Langmuir–Blodgett layers of long-chain molecules containing tertiary amino groups is studied by the polarization method. The study was performed at room temperature using 10- to 25-nm-thick layers in the SO₂ concentration range of 100–3000 mg/m³. It is shown that the amount of the adsorbed sulfur dioxide is proportional to its concentration in the gas phase.     

Adsorption kinetics of protein mixtures. A tentative explanation of “the vroman effect”

A model for protein adsorption kinetics is presented. This model includes diffusion limited adsorption, adsorption and desorption rate constants which are dependent on the surface concentration and an interaction term for the mutual influence of the adsorbed protein molecules. It is shown that, in first approximation, the values of the adsorption and desorption rate constants are exponential functions of the surface concentration. Assuming an adequate interaction term it is possible to show with this model for the adsorption kinetics of a mixture of proteins that the ratio of the adsorbed proteins is strongly dependent on the overall surface concentration even if the ratio of the bulk concentrations of these proteins is kept constant. Differences in interaction terms for the different proteins offer a possible explanation for the peculiar behaviour of plasma protein adsorption on a surface at different dilutions of the plasma, the so called “Vroman effect”.     

聚丙烯酸在纳米TiO2表面吸附行为的研究

讨论了聚丙烯酸在纳米TiO₂水悬浮体系中的吸附行为.红外光谱分析和吸附实验结果表明,纳米TiO₂通过氢键吸附PAA.PAA吸附量随着浓度的升高而增大直至饱和吸附量,且分子量越大,饱和吸附量越大.pH值增大,则饱和吸附量减小.在相同条件下,表面吸附层的厚度随PAA分子量、浓度和pH值增大而增大.这是由PAA在颗粒表面构型的变化所致.吸附PAA后的纳米TiO₂的表面电荷密度和ζ电位发生变化,pHiep值向低值方向移动.表面吸附自由能的计算结果说明,PAA在纳米TiO₂表面的吸附是自发过程.     

Interaction between Globular Proteins and Silica Surfaces

The adsorption of bovine serum albumin on silica of three different types, i.e., aerosil, macroporous silica gel, and ground natural quartz, was studied. The IR spectra of this protein adsorbed on aerosil were measured and analyzed. It was shown that the carbonyl groups of albumin macromolecules interact with vicinal hydroxyl groups while imido groups, with individual hydroxyl groups of silica surface. The geminal hydroxyl groups of the surface behaved as single adsorption sites with respect to albumin. The number or such sites on quartz surface was estimated. The IR spectra indicated that the adsorption of albumin macromolecules caused the dehydration of aerosil surface and the appearance of a small amount (to 10%) of unfolded -regions in the secondary structure of the adsorbed protein, while the -helical macromolecular structure remains preserved as a whole. Changes in the tertiary structure of the protein resulted from the adsorption were discussed. Protein macromolecules folded into globules were shown to be tilted with respect to the adsorbent surface.     

类水滑石对低取代度阳离子淀粉的吸附行为

研究了低取代度阳离子淀粉（CS-L）在Mg-Al类水滑石（HTlc）上的吸附行为。 CS-L可在带结构正电荷的Mg-Al HTlc表面吸附,吸附方程符合Langmuir等温式,300 min左右达吸附平衡,饱和吸附量为33.92 mg/g。 吸附驱动力可能缘自于：CS-L醚键或羟基与HTlc羟基之间形成氢键;熵效应,即吸附所引起的CS的熵减少小于被吸附水释放引起的熵增加。 随着pH值的增加,CS-L和HTlc的Zeta电位均降低,二者静电排斥作用减小,吸附量增加;惰性电解质NaCl和CaCl2的加入可屏蔽HTlc与CS-L之间及CS-L分子内带正电的链段之间的静电排斥力,吸附量增加;pH=9时,带负电的Al八面体多聚体容易吸附在带结构正电荷的HTlc表面进而吸附CS分子,吸附量显著增加;温度升高降低二者氢键作用,吸附量降低。 比较了CS-L与高取代度阳离子淀粉（CS-H）在Mg-Al HTlc上的吸附行为。