Comparison of levels of electronic structure theory in direct dynamics simulations of C2H5F --> HF + C2H4 product energy partitioning

Direct dynamics simulations at the MP2/6-311++G** level of theory were performed to study C(2)H(5)F --> HF + C(2)H(4) product energy partitioning. The simulation results are compared with experiment and a previous MP2/6-31G* simulation. The current simulation with the larger basis set releases more energy to HF vibration and less to HF + C(2)H(4) relative translation as compared to the previous simulation with the 6-31G* basis set. The HF rotation and vibration energy distributions determined from the current simulation are in overall very good agreement with previous experimental studies of C(2)H(5)F dissociation by chemical activation and IRMPA. A comparison of the simulations with experiments suggests there may be important mass effects for energy partitioning in HX elimination from haloalkanes. The transition state (TS) structures and energies calculated with MP2 and the 6-31G* and 6-311++G** basis sets are compared with those calculated using CCD, CCSD, CCSD(T), and the 6-311++G** basis set.     

An ab initio study of intermolecular interactions of nitromethane dimer and nitromethane trimer

Different geometries of nitromethane dimer and nitromethane trimer have been fully optimized employing the density functional theory B3LYP method and the 6-31++G** basis set. Three-body interaction energy has been obtained with the ab initio supermolecular approach at the levels of MP2/6-31++G**//B3LYP/6-31++G** and MP2/aug-cc-pVDZ//B3LYP/6-31++G**. The internal rotation of methyl group induced by intermolecular interaction has been observed theoretically. For the optimized structures of nitromethane dimer, the strength of C--H...O--N H-bond ranges from -9.0 to -12.4 kJ mol(-1) at the MP2/aug-cc-pVDZ//B3LYP/6-31++G** level, and the B3LYP method underestimates the interaction strength compared with the MP2 method, while MP2/6-31++G**//B3LYP/6-31++G** calculated DeltaE(C) is within 2.5 kJ mol(-1) of the corresponding value at the MP4(SDTQ)/6-31G**//B3LYP/6-31++G** level. The analytic atom-atom intermolecular potential has been successfully regressed by using the MP2/6-31++G**//B3LYP/6-31++G** calculated interaction energies of nitromethane dimer. For the optimized structures of nitromethane trimer the three-body interaction energies occupy small percentage of corresponding total binding energies, but become important for the compressed nitromethane explosive. In addition, it has been discovered that the three-body interaction energy in the cyclic nitromethane trimer is more and more negative as intermolecular distances decrease from 2.2 to 1.7 A.     

Structure of the boronic acid dimer and the relative stabilities of its conformers

Despite the widespread use of boronic acids in materials science and as pharmaceutical agents, many aspects of their structure and reactivity are not well understood. In this research the boronic acid dimer, [HB(OH)(2)](2), was studied by second-order M?ller-Plesset (MP2) perturbation theory and coupled cluster methodology with single and double excitations (CCSD). Pople split-valence 6-31+G*, 6-311G**, and 6-311++G** and Dunning-Woon correlation-consistent cc-pVDZ, aug-cc-pVDZ, cc-pVTZ, and aug-cc-pVTZ basis sets were employed for the calculations. A doubly hydrogen-bonded conformer (1) of the dimer was consistently found to be lowest in energy; the structure of 1 was planar (C(2h)) at most computational levels employed but was significantly nonplanar (C(2)) at the MP2/6-311++G** and CCSD/6-311++G** levels, the result of an intrinsic problem with Pople-type sp-diffuse basis functions on heavy atoms. The dimerization energy, enthalpy, and free energy for the formation of (1) from the exo-endo conformer of the monomer were -10.8, -9.2, and +1.2 kcal/mol, respectively, at the MP2/aug-cc-pVTZ level. Several other hydrogen-bonded conformers of the dimer were local minima on the potential energy surface (PES) and ranged from 2 to 5 kcal/mol higher in energy than 1. Nine doubly OH-bridged conformers, in which the boron atoms were tetracoordinated, were also local minima on the PES, but they were all greater than 13 kcal/mol higher in energy than 1; doubly H-bridged structures proved to be transition states. MP2 and CCSD results were compared to those from the BLYP, B3LYP, OLYP, O3LYP, PBE1PBE, and TPSS functionals with the 6-311++G** and aug-cc-pVTZ basis sets; the PBE1PBE functional performed best relative to the MP2 and CCSD results. Self-consistent reaction field (SCRF) calculations predict that boronic acid dimerization is less favorable in solution than in vacuo.     

Comparison of some representative density functional theory and wave function theory methods for the studies of amino acids

Energies of different conformers of 22 amino acid molecules and their protonated and deprotonated species were calculated by some density functional theory (DFT; SVWN, B3LYP, B3PW91, MPWB1K, BHandHLYP) and wave function theory (WFT; HF, MP2) methods with the 6-311++G(d,p) basis set to obtain the relative conformer energies, vertical electron detachment energies, deprotonation energies, and proton affinities. Taking the CCSD/6-311++G(d,p) results as the references, the performances of the tested DFT and WFT methods for amino acids with various intramolecular hydrogen bonds were determined. The BHandHLYP method was the best overall performer among the tested DFT methods, and its accuracy was even better than that of the more expensive MP2 method. The computational dependencies of the five DFT methods and the HF and MP2 methods on the basis sets were further examined with the 6-31G(d,p), 6-311++G(d,p), aug-cc-pVDZ, 6-311++G(2df,p), and aug-cc-pVTZ basis sets. The differences between the small and large basis set results have decreased quickly for the hybrid generalized gradient approximation (GGA) methods. The basis set convergence of the MP2 results has been, however, very slow. Considering both the cost and the accuracy, the BHandHLYP functional with the 6-311++G(d,p) basis set is the best choice for the amino acid systems that are rich in hydrogen bonds.     

高级量子化学从头计算法研究N2和H2O分子间相互作用

在MP2/6-311++G(3d,3p)电子相关校正水平上,对N₂和H₂O分子间可能存在的氢键复合物进行全自由度能量梯度优化,发现了一个接近于直线的弱氢键总能量极小结构(1),进一步在高级电子相关校正的MP4SDTQ和CCSD(T)水平,用6-311++G(3d,3p)基组加上(3s3p2d1f)键函数,用MP4和CCSD(T)计算的结构1的结合能分别为-5.061kJ/mol和-4.715kJ/mol.     

Benchmark database of accurate (MP2 and CCSD(T) complete basis set limit) interaction energies of small model complexes, DNA base pairs, and amino acid pairs

MP2 and CCSD(T) complete basis set (CBS) limit interaction energies and geometries for more than 100 DNA base pairs, amino acid pairs and model complexes are for the first time presented together. Extrapolation to the CBS limit is done by using two-point extrapolation methods and different basis sets (aug-cc-pVDZ - aug-cc-pVTZ, aug-cc-pVTZ - aug-cc-pVQZ, cc-pVTZ - cc-pVQZ) are utilized. The CCSD(T) correction term, determined as a difference between CCSD(T) and MP2 interaction energies, is evaluated with smaller basis sets (6-31G** and cc-pVDZ). Two sets of complex geometries were used, optimized or experimental ones. The JSCH-2005 benchmark set, which is now available to the chemical community, can be used for testing lower-level computational methods. For the first screening the smaller training set (S22) containing 22 model complexes can be recommended. In this case larger basis sets were used for extrapolation to the CBS limit and also CCSD(T) and counterpoise-corrected MP2 optimized geometries were sometimes adopted.     

Structural studies on ethyl isovalerate by microwave spectroscopy and quantum chemical calculations

We observed the microwave spectrum of ethyl isovalerate by molecular beam Fourier transform microwave spectroscopy. The rotational and centrifugal distortion constants of the most abundant conformer were determined. Its structure was investigated by comparison of the experimental rotational constants with those obtained by ab initio methods. In a first step, the rotational constants of various conformers were calculated at the MP2/6-311++G** level of theory. Surprisingly, no agreement with the experimental results was found. Therefore, we concluded that in the case of ethyl isovalerate more advanced quantum chemical methods are required to obtain a reliable molecular geometry. Ab initio calculations carried out at MP3/6-311++G**, MP4/6-311++G**, and CCSD/6-311++G** levels and also density functional theory calculations using the B3LYP/6-311++G** method gave similar results for the rotational constants, but they were clearly distinct from those obtained at the MP2/6-311++G** level. With use of these more advanced methods, the rotational constants of the lowest energy conformer were in good agreement with those obtained from the microwave spectrum.     

Theoretical studies of host-guest interaction in gas hydrates

Ab initio calculations and atoms-in-molecules (AIM) analysis have been used to investigate the host-guest interaction in dodecahedral water cages using a variety of guest species that include monatomic (He, Ne, Ar, Kr, and Xe), diatomic (CO, H(2), N(2), O(2), and NO), triatomic (CO(2), NO(2), and O(3)), and polyatomic (CH(4) and NH(3)) molecules. Geometry optimization for the guest species, host cage, and their complexes was carried out using the second order M?ller-Plesset perturbation method with the 6-31G** basis set. Single point energy calculations using the same method but different basis sets (6-31++G**, 6-311++G**, aug-cc-pVDZ, and aug-cc-pVTZ) were carried out for the MP2/6-31G** optimized geometries. The interaction energy between the guest species and the host cage has been obtained in the complete basis set limit by basis set extrapolation.     

An Ab Initio Study of the Complexes Formed by the Positive Acetylene Ion with the Hydrogen and Nitrogen Molecules and the Argon Atom

The complexes formed by the positive acetylene ion with the hydrogen molecule, the nitrogen molecule, and the argon atom are investigated with ab initio calculations using the 6-311G** and the 6-31+G(2df,2pd) basis sets. MP2/6-311G** energies and optimum geometries are obtained, as well as single-point MP3, MP4, and QCISD(T) energies with the MP2/6-311G** optimized geometries. Single-point calculations are performed with the 6-31+G(2df,2pd) basis set at MP2/6-311G** optimized geometries.     

Theoretical study of light-metal tetrahydroaluminates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroaluminates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the molecular characteristics have been analyzed in various related series of these compounds. The results are compared with the data on analogous light-metal tetrahydroborates calculated at the same levels of theory. The differences in structure and stability between analogous hydroborate and alanate complexes are examined. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** has been shown to adequately reproduce the results obtained at the higher level of theory CCSD(T)/6-311++G**//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

气相中O3与HSO自由基间的氢键复合物

气相中O3与HSO自由基之间的相互作用及其反应在大气化学中非常重要.在DFT-B3LYP/6-311++G**和MP2/6-311++G**水平上求得O3+HSO复合物势能面上的稳定构型,B3LYP方法得到了三种构型(复合物Ⅰ,Ⅱ和Ⅲ),而MP2方法只能得到一种构犁(复合物Ⅱ).在复合物Ⅰ和Ⅲ中,HSO单元中的1H原子作为质子供体.与O3分子中的端基O原子作为质子受体相互作用,形成红移氢键复合物;而在复合物Ⅱ中,虽与复合物Ⅰ和Ⅲ中具有相间的质子供体和质子受体,却形成了蓝移氢键复合物.B3LYP/6-311++G**水平上计算的单体间相互作用能的计算考虑了基组重甍误差(BSSE)和零点振动能(ZPVE)校正,其值在-3.37到-4.55 kJ·mol-1之间.采用自然键轨道理论(NBO)对单体间相互作用的本质进行了考查,并通过分子中原子理论(AIM)分析了三种复合物中氢键的电子密度拓扑性质.     

气相中O3与HSO自由基间的氢键复合物

气相中O3与HSO自由基之间的相互作用及其反应在大气化学中非常重要. 在DFT-B3LYP/6-311++G**和MP2/6-311++G**水平上求得O3+HSO复合物势能面上的稳定构型, B3LYP方法得到了三种构型(复合物I, II和III), 而MP2方法只能得到一种构型(复合物II). 在复合物I和III中, HSO单元中的1H原子作为质子供体, 与O3分子中的端基O原子作为质子受体相互作用, 形成红移氢键复合物; 而在复合物II中, 虽与复合物I和III中具有相同的质子供体和质子受体, 却形成了蓝移氢键复合物. B3LYP/6-311++G**水平上计算的单体间相互作用能的计算考虑了基组重叠误差(BSSE)和零点振动能(ZPVE)校正, 其值在-3.37到-4.55 kJ·mol-1之间. 采用自然键轨道理论(NBO)对单体间相互作用的本质进行了考查, 并通过分子中原子理论(AIM)分析了三种复合物中氢键的电子密度拓扑性质.     

An exploration of electronic structure and nuclear dynamics in tropolone. I. The X 1A1 ground state

The ground electronic state (X 1A1) of tropolone has been examined theoretically by exploiting extensive sets of basis functions [e.g., 6-311++G(d,p) and aug-cc-pVDZ] in conjunction with the high levels of electron correlation made possible by density functional (DFT/B3LYP), Moller-Plesset perturbation (MP2), and coupled-cluster [CCSD and CCSD(T)] methods. Unconstrained MP2 and CCSD optimization procedures performed with the reference 6-311++G(d,p) basis predict a slightly nonplanar equilibrium structure characterized by a small barrier to skeletal inversion (< or =10 cm(-1) magnitude). Complementary harmonic frequency analyses have shown this nonplanarity to be a computational artifact arising from adversely tuned carbon d-orbital exponents embodied in the standard definitions of several Pople-type basis sets. Correlation-consistent bases such as Dunning's aug-cc-pVDZ are less susceptible to these effects and were employed to confirm that the X 1A1 hypersurface supports a rigorously planar global minimum. The fully optimized geometries and vibrational force fields obtained by applying potent coupled-cluster schemes to the relaxed-equilibrium (Cs) and transition-state (C2v) conformers of tropolone afford a trenchant glimpse of the key features that mediate intramolecular hydron exchange in this model system. By incorporating perturbative triples corrections at the substantial CCSD(T) level of theory, an interoxygen distance of r(O...O)=2.528 A was determined for the minimum-energy configuration, with the accompanying proton-transfer reaction being hindered by a barrier of 2557.0 cm(-1) height. The potential energy landscape in tropolone, as well as the nature of the attendant hydron migration process, is discussed within the framework of the encompassing G4 molecular symmetry group.     

去氢抗坏血酸分子振动光谱的理论研究

采用RHF, MP2, DFT(B3LYP)方法, 以6-311++G**为基组研究了去氢抗坏血酸分子(DHA)的平衡几何构型和振动光谱. 计算结果表明, 采用RHF, B3LYP以及MP2 方法优化得到的几何结构以及频率值是一致的. 采用B3LYP/6-311++G**计算了DHA分子平衡构型下的谐振动力场﹑振动频率和振动强度. 使用Wilson的GF矩阵方法对DHA分子进行了简正坐标分析, 依据所得的势能分布对DHA分子的振动基频进行了合理的理论归属.     

A computational study of intramolecular proton transfer in gaseous protonated glycine

The minimum energy paths for intramolecular proton transfer between the amino nitrogen and carbonyl oxygen atoms in gaseous protonated glycine were estimated at the Hartree-Fock (HF) and second-order M?ller-Plesset Perturbation (MP2) levels of theory. Potential energy profiles and their associated reactant, transition state, and product species calculated at the MP2/6-31G* level were shown to differ significantly from those obtained at the HF/6-31G* level. Effects of electron correlation and basis functions on the calculated geometries and energies of relevant species were examined at the HF, MP2, MP4, CCSD, and B3LYP levels using the 6-31G*, 6-31G**, 6-31+G**, 6-311+G**, 6-31+G(2d,2p), 6-311+G(3df,2p), cc-pVDZ, aug-cc-pVDZ, and cc-pVTZ basis sets. The HF and MP2 optimized levels with the 6-31G*, 6-31G**, 6-31+G**, and 6-311+G** bases were used to calculate the thermodynamic and kinetic properties of the proton transfer reaction at 298.15 K and 1 atm, which include enthalpy, entropy, Gibbs free energy, equilibrium constant, potential energy barriers, tunneling transmission coefficients, and rate constants. Results indicate that the proton in a carbonyl O-protonated glycine undergoes a rapid migration to the amino nitrogen atom, while the reverse process is extremely unfavorable. The objective of this work is to develop practical theoretical procedures for studying proton transfer reactions in amino acids and peptides and to assemble physical data from these model calculations for future references.     

An ab initio and density functional theory study of keto-enol equilibria of hydroxycyclopropenone in gas and aqueous solution phase

Keto-enol tautomerism in hydroxycyclopropenone (2-hydroxy-2-cyclopropen-1-one) has been studied using ab initio methods, the B3LYP functional of density functional theory, as well as complete basis set (CBS-QB3 and CBS-APNO) and G3 methods. Absolute and relative energies were calculated with each of the methods, whereas computations of geometries and harmonic frequencies for hydroxycyclopropenone and 1,2-cyclopropanedione were computed in the gas phase but were limited to HF, MP2 and CCSD levels of theory, and the B3LYP functional, in combination with the 6-31++G** basis set. Using the MP2/6-31++G** gas phase optimized structure, each species was then optimized fully in aqueous solution by employing the polarizable continuum model (PCM) self-consistent reaction field approach, in which HF, MP2 and B3LYP levels of theory were utilized, with the same 6-31++G** basis set. In both gas and aqueous solution phases, the keto form is higher in energy for all of the model chemistries considered. The presence of the solvent, however, is found to have very little effect on the bond lengths, angles and harmonic frequencies. From the B3LYP/6-31++G** Gibbs free energy, the keto-enol tautomeric equilibrium constant for 2-hydroxy-2-cyclopropen-1-one <==> 1,2-cyclopropanedione is computed to be K(T)(gas) = 2.35 x 10(-6), K(T)(aq) = 5.61 x 10(-14). It is concluded that the enol form is overwhelmingly predominant in both environments, with the effect of the solvent shifting the direction of equilibrium even more strongly in the favor of hydroxycyclopropenone. The almost exclusive nature of this species is attributed to stabilization resulting from aromaticity. Confirmation is provided by comparison of the simulated vibrational spectra of hydroxycyclopropenone with the measured infrared spectrum in an argon matrix.     

Theoretical investigation of the structure and vibrational spectra of carbamoyl azide

Molecular structure and vibrational frequencies of carbamoyl azide NH2CO-NNN have been investigated with ab initio and density functional theory (DFT) methods. The molecular geometries for all the possible conformers of the molecule were optimized using DFT-B3LYP, DFT-BLYP and MP2 applying the standard 6-311++G** basis set. From the calculations, the molecule was predicted to exist predominantly in cis conformation with the cis-trans rotational barrier of about 7.91-9.10 kcal/mol depending on the level of theory applied. The vibrational frequencies and the corresponding vibrational assignments of carbamoyl azide in Cs symmetry were examined theoretically and the calculated Infrared and Raman spectra of the molecule in the cis conformation were plotted. Observed frequencies for normal modes were compare with those calculated from normal mode coordinate analysis carried out on the basis of ab initio and DFT force fields using the standard 6-311++G** basis set of the theoretical optimized geometry. Theoretical IR intensities and Raman activities are reported.     

Theoretical study of light-metal tetrahydroborates

Ab initio calculations of the structural, energetic, vibrational, and magnetic characteristics of the lowest-lying structures for isolated molecules and ions of light-metal tetrahydroborates (Li, Na, Be, Mg, and Al) have been performed by the perturbation theory (MP2), quadratic configuration interaction (QCISD(T)), coupled cluster (CCSD(T)), and density functional theory (B3LYP) methods using the 6-31G*, 6-31G**, 6-311+G**, and 6-311++G** basis sets. The trends in the behavior of the structural parameters, the energies of different decomposition pathways, barriers to internal rotation of BH₄ groups, normal mode frequencies, magnetic shielding constants, and spin density distribution (in radicals) have been analyzed in various related series of these compounds. The results obtained by ab initio methods and at the DFT level are compared. The economical approximation B3LYP/6-311++G**//B3LYP/6-311+G** adequately reproduces the results obtained at the higher level of theory CCSD(T)/6-311++G*s*//MP2/6-31G* even though it requires considerably shorter CPU times and smaller amounts of memory.     

Thermochemical properties of molecules and cations of MgNnHm (n=1,2 and m=1–6): enthalpies of formation, proton affinities and ionization energies

Ab initio molecular orbital calculations are reported for small neutral molecules and cations containing magnesium, nitrogen and hydrogen. Structures have been optimized using gradient techniques at B3LYP/6-31+G(d) and at MP2(full)/6-311++G(d,p). Single-point calculations are reported at QCISD(T)(full)/6-311++G(2df,p) and at CCSD(T)(full)/6-311++G(2df,p) levels using geometries optimized at MP2(full)/6-311++G(d,p). Standard enthalpies of formation at 298 K have been calculated at these two higher levels of theory. Other thermochemical properties calculated include ionization energies and proton affinities. The binding enthalpies of ammonia to Mg⁺, MgNH₂⁺ and MgNH₃⁺ are also reported.     

Interaction of anions with perfluoro aromatic compounds

The complexes formed by a variety of anions with perfluoro derivatives of benzene, naphthalene, pyridine, thiophene, and furan have been calculated using DFT (B3LYP/6-31++G**) and MP2 (MP2/6-31++G** and MP2/6-311++G**) ab initio methods. The minimum structures show the anion interacting with the pi-cloud of the aromatic compounds. The interaction energies obtained range between -8 and -19 kcal mol(-1). The results obtained at the MP2/6-31++G** and MP2/6-311++G** levels are similar. However, the B3LYP/6-31++G** results provide longer interaction distances and smaller interaction energies than do the MP2 results. The interaction energies have been partitioned using an electrostatic, polarization, and van der Waals scheme. The AIM analysis of the electron density shows a variety of topologies depending on the aromatic system considered.