Physicochemical investigations of microemulsification of coconut oil and water using polyoxyethylene 2-cetyl ether (Brij 52) and isopropanol or ethanol

The microemulsification of coconut oil/polyoxyethylene 2-cetyl ether/2-propanol or ethanol/water was investigated. The phase behaviors of the mixed system were examined. The shear viscosity at different temperatures was measured to derive activation parameters for the viscous flow. The diffusion coefficient of the microemulsions at different compositions was determined by the DLS method. The energetics of solubilization of water into oil + Brij + alkanol as well as of oil into water + Brij + alkanol forming w/o and o/w microemulsions, respectively, were calorimetrically determined.     

Interface of AOT/Brij mixed reverse micellar systems: conductometric and spectrophotometric investigations

Solubilization and conductivity studies are carried out with AOT/Brijs (Brij-30, Brij-35, Brij-52, Brij-56, Brij-58, Brij-72, Brij-76, Brij-78)/isooctane/water mixed reverse micellar systems. Replacement of AOT molecules with large head group Brij molecules (Brij-30, Brij-35, Brij-56, Brij-58, Brij-76, Brij-78) decreases the solubilization capacity, whereas those with smaller polar head groups (Brij-52 and Brij-72) increases it. The former blends assist the conductance percolation whereas the latter retard it. An attempt has been taken to obtain more insight on the interfacial composition of the mixed interface with the help of spectrophotometric studies using 7-hydroxycoumarin as the fluorophore. The results obtained from the solubilization and conductometric studies have been correlated with those obtained from the spectroscopic studies.     

Spreading of mixed solution of fluorocarbon and hydrocarbon surfactants on oil

Colloid and Polymer Science - The surface tension and the spreading (on oil) properties of the mixed solution of anionic (or cationic) and cationic (or anionic) fluorocarbon and hydrocarbon...     

Partition and water/oil adsorption of some surfactants

Adsorption isotherms have been determined at the water/oil interface for five biphasic systems involving surfactants (non-ionic and ionic) present in both phases at partition equilibrium. The systems studied were polyoxyethylene(23)lauryl ether (Brij35) in water/hexane and four ionic surfactants, hexadecyltrimethylammonium bromide (CTAB), and a series of three tetraalkylammonium dodecylsulfate (TEADS, TPADS, and TBADS) in water/CH 2Cl 2. Interfacial tension measurements performed at the water/air and water/oil interfaces provided all the necessary information for the determination of the adsorption parameters by taking partition into account. These measurements also allowed the comparison of the adsorption properties at both interfaces which showed an increase of the adsorption equilibrium constant and a decrease of the maximum surface concentration at the water/oil interface compared to water/air. The values of the critical aggregation concentration showed, in all cases, that only the surfactant dissolved in the aqueous phase contribute to the decrease of the water/oil interfacial tension. In the case of the four ionic surfactants, the critical aggregation concentration obtained in biphasic conditions were lowered because of the formation of mixed surfactant-CH 2Cl 2 aggregates.     

Investigation on the basic hydrolysis of crystal violet in mixed reverse micelles formed with AOT and nonionic surfactants

 The kinetics and thermodynamics of the basic hydrolysis of crystal violet (CV) in mixed reverse micelles formed with anionic surfactant AOT and nonionic surfactants have been investigated. It was found that the mixed reverse micelles had inhibitory effects on CV hydrolysis compared with the normal aqueous solution, and the equilibrium constant K of the reaction in mixed reverse micellar systems is smaller than that in pure water. The influence of water content and surfactant composition in reverse micelles on the second-order rate constant k ₁ of the positive reaction, on the first-order rate constant k _-1 of the reverse reaction, as well as on the equilibrium constant K of the reaction has been studied, and the results obtained were interpreted in terms of the nature of surfactants and the properties of microenvironment where the reaction took place. Received: 24 October 1997 Accepted: 18 March 1998     

Heterogeneity in binary mixtures of (water + tertiary butanol): temperature dependence across mixture composition

The temperature dependence of solution heterogeneity in binary mixtures of water and tertiary butanol (TBA) and its effects on a chemical reaction have been investigated by using steady-state and time-resolved spectroscopic experiments within the temperature range of 278 ≤ T/K ≤ 373. Eleven different mole fractions of TBA, covering extremely low TBA mole fractions to pure TBA, have been considered. An organic chromophore that undergoes a photoexcited intramolecular charge-transfer reaction is employed to reveal the signature of the solution heterogeneity. Upon increasing the solution temperature, the absorption spectrum of the dissolved chromophore exhibits a red shift at very low TBA concentrations but shifts toward higher energy (blue shift) at higher alcohol concentrations. This is a reflection of temperature-assisted aggregation of TBA molecules in very dilute aqueous solutions. The magnitude of the temperature-induced red shift is the largest at around 0.04 mol fraction of TBA, and a larger variation of the spectral line width across the temperature suggests enhanced solution heterogeneity. Reaction time constants measured at various mixture compositions are found to follow an Arrhenius-type temperature dependence. The average activation energy, when plotted as a function of mixture composition, steeply rises with TBA concentration in the limit of the very low TBA mole fraction and then suddenly levels off to a plateau upon further addition of TBA. The alcohol concentration-dependent activation energy abruptly changes its slope at a TBA mole fraction ～0.1, at which a transition from the three-dimensional water-type network to the zigzag alcohol chain structure is known to occur. The plateau value of the activation energy is ～6k(B)T and agrees well with the earlier estimate for the same chromophore from the pure solvent data at room temperature. The observed increase in the spectral red shift with temperature at low TBA mole fractions is in general agreement with the existing experimental results which support the view that temperature assists the aggregation of TBA molecules in dilute aqueous solutions of TBA. However, unlike in the small-angle neutron scattering study [ Bowron, D. T.; Finney, J. L. J. Phys. Chem. B 2007, 111, 9838], which finds clustering of TBA molecules reaching a maximum at ～353 K, the present data do not indicate any such temperature maximum within the temperature range of 278 ≤ T/K ≤ 373.     

Modification of reversed-phase separations of small molecules using non-ionic surfactants and mixed ionic-non-ionic surfactants

The effects of non-ionic surfactants, Tween 20 and Tween 60, on reversed-phase separations of small molecules have been examined. Tween compounds were found to partition irreversibly into the ODS material used, markedly decreasing capacity factors for the compounds tested. Compounds which could hydrogen bond were less affected. Ion pairing using either anionic or cationic surfactants was possible in the presence of the non-ionic surfactants. While reversed-phase effects predominate under these conditions, secondary effects on retention order were observed and attributed to hydrogen bonding. Primary amines were retained longer than the corresponding secondary amine while catechols were retained longer than the corresponding methoxyphenols.     

Conductometric and fluorometric investigations on the mixed micellar systems of cationic surfactants in aqueous media

Micellar properties of binary mixtures of hexadecyldiethylethanolammonium bromide surfactant with tetradecyldimethylammonium, trimethylammonium, triphenylphosphonium, diethylethanolammonium, and pyridinium bromide surfactants have been characterized employing conductometric and fluorescence techniques. The critical micelle concentration (cmc*) and the degree of counter-ion binding values (delta) of the binary systems were determined from the conductivity measurements. The results were analyzed in light of various existing theories to calculate micellar composition, activity coefficients, and the interaction parameter (beta). Partial contribution of each surfactant, cmc1*, cmc2*, to the overall cmc* value was also evaluated. Aggregation numbers and micropolarity of the mixed micelles were determined from fluorescence measurements. The results were discussed in terms of synergetic interactions in these systems on the basis of the head group/head group and tail/tail interactions and the counter-ion binding.     

Physicochemical analysis of a kerogen rock (oil shale)

A composition of a kerogen was studied with the use of chemical, physical, and spectral (IR, NMR, XRD, XPS, and ESR) methods. A yield and main characteristics of kerogen were found.     

Analysis of interfacial and micellar behavior of sodium dioctyl sulphosuccinate salt (AOT) with zwitterionic surfactants in aqueous media

The interfacial and bulk properties of mixtures of the anionic surfactant (dioctyl sulphosuccinate sodium salt, AOT) with zwitterionic surfactants 3-(N,N-dimethyldodecylammonio) propane sulfonate (DPS), 3-(N,N-dimethyltetradecylammonio) propane sulfonate (TPS), 3-(N,N-dimethylhexadecylammonio) propane sulfonate (HPS) have been studied employing surface tension, fluorescence, and viscometric techniques in aqueous media at 25 °C. It is observed that these mixtures exhibit synergism and these synergistic interactions increase with the enhancement of the hydrocarbon chain of the zwitterionic surfactant. The various physicochemical properties such as critical micelle concentration (cmc), surface excess concentration (Г(max)), minimum area per molecule (A(min)), aggregation number (N(agg)), interaction parameters (β(σ), β(m)), and thermodynamic parameters such as standard Gibbs free energy of adsorption (ΔG(ads)(o)), excess free energy of micellization (ΔG(ex)), and standard Gibbs free energy of micellization (ΔG(m)(o)) have been evaluated. The negative values of ΔG(m)(o) and ΔG(ads)(o) show that the micelle formation and adsorption of surfactant at the air/solution interface is energetically favorable, while a negative value of ΔG(ex) ensures stability of the mixed micelles formed. The Regular Solution Approximation, Motomura and Rosen's approaches have been used to explain and compare the results. The packing parameter (p) ensures the formation of vesicles or bilayers for AOT+DPS/TPS mixtures, which can potentially be used as delivery agents for industrial applications.     

Solution of telechelic ionomers in water/AOT/oil (w/o) microemulsions: a static and dynamic light scattering study

Static and quasielastic light-scattering measurements of endsulfonated polyisoprene in a water in oil (w/o) microemulsions were used to characterize the structure and diffusion properties of this complex system. The hydrophilic end groups of the polymer stick to the surfactant covered oil/water interface, thus bridging the water droplets. This structure formation decreases the mobility of the aqueous nanodroplets and polymer molecules. At interdroplet distances larger than the end-to-end distance of the ionomer chain a decrease of the osmotic modulus is observed. It can be explained by a depletion force of free ionomer chains acting on the nanodroplets. With increasing polymer concentration structure formation of the microemulsion is observed at nanodroplet concentrations where the ionomer chains just fit the average separation of two nanodroplets.     

Modulation of dynamics and reactivity of water in reverse micelles of mixed surfactants

In this contribution, we attempt to correlate the change in water dynamics in a reverse micellar (RM) core caused by the modification of the interface by mixing an anionic surfactant, sodium bis(2-ethylhexyl) sulfosuccinate (AOT), and a nonionic surfactant, tetraethylene glycol monododecyl ether (Brij-30), at different proportions, and its consequent effect on the reactivity of water, measured by monitoring the solvolysis reaction of benzoyl chloride (BzCl). The dimension of the RM droplets at different mixing ratios of AOT and Brij-30 (X(Brij-30)) has been measured using dynamic light scattering (DLS) technique. The physical properties of the RM water have been determined using Fourier transform infrared spectroscopy (FTIR) and compressibility studies, which show that with increasing X(Brij-30), the water properties tend toward that of bulk-like water. The solvation dynamics, probed by coumarin 500 dye, gets faster with X(Brij-30). The rotational anisotropy studies along with a wobbling-in-cone analysis show that the probe experiences less restriction at higher X(Brij-30). The kinetics of the water-mediated solvolysis also gets faster with X(Brij-30). The increased rate of solvolysis has been correlated with the accelerated solvation dynamics, which is another consequence of surfactant headgroup-water interaction.     

Adsorption of oil into surfactant monolayers and structure of mixed surfactant+oil films

We describe a tensiometric method for determining the adsorption isotherm of an oil on a surfactant monolayer adsorbed at the air–water surface. The method involves measuring the surface pressure of oil, π_oil, as a function of its activity, a_oil, varied by changing the relative vapour pressure. We compare the isotherm of dodecane adsorption onto a C₁₂E₅ monolayer determined in this way with that measured directly using neutron reflectivity. The agreement between the two allows us to conclude that, at least for this system, addition of oil does not result in a change in the chemical potential of the surfactant. Structural analysis of the dodecane+C₁₂E₅ mixed film has been performed with neutron reflectivity using two contrasts. In one, only the surfactant chain region is highlighted, whilst in the other only the oil film is visible. We document, for the first time, changes in thickness and packing density of both the oil and surfactant chains in the mixed surfactant+oil layer upon increasing oil content. For a diverse range of other oil+surfactant systems, we have determined the initial (S_i) and equilibrium (S_e) spreading coefficients of oil by measuring π_oil following addition of liquid oil (at unit activity) to surfactant solution surfaces. Those systems in which S_e is close to zero display a repulsive van der Waals component of the disjoining pressure-oil film thickness isotherm, whilst with toluene as oil the calculated isotherm is attractive, consistent with non-spreading observed for this oil.     

Physicochemical and catalytic investigations of grafted poly(tetrafluoroethylene) complexed with some transition metal nitrates

Radiation-induced graft polymerization of methacrylic acid into poly(tetrafluoroethylene) by the mutual irradiation technique has been studied. The obtained hydrophilic solids were treated with solutions containing calculated amounts of iron, cobalt, nickel, or copper nitrates. The amounts of these transition metal nitrates were fixed at 16 wt%, expressed as metal oxide. IR, XRD, TG, and catalysis of CO oxidation reaction by O₂ have been carried out on the various prepared solids. The results obtained revealed that most of iron and copper species were contributed in complex formation of the polymeric material via carboxylic groups while some of the cobalt and nickel were involved in the complex formation and the rest remained as separate phases. The thermal treatment either in air at 400°C or in vacuo at 240°C led to degradation of the treated grafted polymeric material with subsequent formation of poly(methacrylic acid) together with Co₃O₄ (poorly crystalline phase) and NiO (having moderate crystallinity) and minute amounts of Fe₂O₃ and CuO (undetected by XRD). The PTFE-g-PMAAc treated with the different transition metal nitrates and subjected to heating under vacuum at 240°C exhibited different catalytic activities that vary in the order: Co > Ni > Cu ? Fe. The catalytic activity was mainly dependent on the produced amount of free oxide and their degree of division. © 1993 John Wiley & Sons, Inc.     

The synthesis of silica and silica-ceria, core-shell nanoparticles in a water-in-oil (W/O) microemulsion composed of heptane and water with the binary surfactants AOT and NP-5

In a previous work [1] we showed that the swelling behavior of carboxylated core-shell particles (PS-PC) can be modified using a specific sample preparation route or favoring the hydrophobic attractive interaction by other way, i.e. controlling the temperature. In that paper, we found that the swelling was promoted in those particles which were initially in a highly swollen state (pH?10) while it was hindered for those particles which were not previously in this trigger pH. In this work, we present a discussion of the salt-induced swelling of the same carboxylated core-shell system (PS-PC) with two tuned swelling behaviors: the former, called A-2, exhibits promoted swelling while in the latter, called B-1, the swelling is greatly suppressed because of a compact conformation of the polymer shell is induced [1]. Good agreement between experimental, numerical and theoretical results at all pH values is obtained for promoted particles (A-2). On the other hand, the salt-induced swelling behaviors shown by hindered particles (B-1) corroborate that polymer restructuring includes assembly among ionic groups which affect their ionization degree and also the electrosteric interaction between particles. Finally, the salt-induced swelling behavior shown by the B-1 system at pH 8.6 resembles the Pincus regime predicted by scaling theory.     

Recovery of silver nanoparticles synthesized on AOT/C(12)E(4) mixed reverse micelles by antisolvent CO(2)

Silver nanoparticles were synthesized in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles in isooctane with tetraethylene glycol dodecyl ether (C(12)E(4)) as a cosurfactant. Recovery of the Ag particles from the reverse micelles by dissolving antisolvent CO(2) in the micellar solution was investigated. All the Ag particles in the reverse micelles could be precipitated by compressed CO(2) at suitable pressures, while the surfactants remained in the isooctane continuous phase, and well-dispersed Ag nanoparticles were obtained. The effects of operating conditions on the size and size distribution of the Ag particles were investigated. The particle size decreased with decreasing molar ratio (w) of water to surfactant. A higher CO(2) pressure in the recovery process favored production of smaller particles. A decrease in the molar ratio of reductant KBH(4) to AgNO(3) resulted in larger Ag particles with higher polydispersity.     

Micellization and mixed micellization of cationic gemini (dimeric) surfactants and cationic conventional (monomeric) surfactants: Conductometric,dye solubilization,and surface tension studies

In the present study, we have investigated the self-association, mixed micellization, and thermodynamic studies of a cationic gemini (dimeric) surfactant, hexanediyl-1,6-bis(dimethylcetylammonium bromide (16-6-16)) and a cationic conventional (monomeric) surfactant, cetyltrimethylammonium bromide (CTAB). The critical micelle concentration (CMC) of pure (16-6-16 and CTAB) and mixed (16-6-16+CTAB) surfactants was measured by electrical conductivity, dye solubilization, and surface tension measurements. The surface properties (viz., C₂₀ (the surfactant concentration required to reduce the surface tension by 20 mN/m), Π_CMC (the surface pressure at the CMC), Γ_max (maximum surface excess concentration at the air/water interface), A_min (the minimum area per surfactant molecule at the air/water interface), etc.) of micellar (16-6-16 or CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were evaluated. The thermodynamic parameters of the micellar (16-6-16 and CTAB) and mixed micellar (16-6-16+CTAB) surfactant systems were also evaluated.     

Phase behavior of water/oil/nonionic surfactants with normal distribution of the poly(ethylene oxide) chain length

The phase behavior of systems consisting of water/n-hexane/polyethoxylated nonionic surfactants with a normal distribution of ethylene oxide (EO) chain length has been investigated. The surfactants used were octylphenol ethoxylated with eight EO units and nonylphenol ethoxylated with seven and ten EO units. The oil/water weight ratio was keep constant at 1, whereas the amount of surfactant and the temperature were variables. The pseudobinary phase diagrams were used to find out the triphasic bodies on the temperature scale, the tricritical points and the effect of electrolyte on them. The presence of electrolyte and the increase in surfactant hydrophobicity promote the phase inversion.     

Aggregation behavior of tetrakis(4-sulfonatophenyl)porphyrin in AOT/water/decane microemulsions

AOT/water/decane microemulsions have been used to entrap the water-soluble 5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS4). Quasi-elastic light scattering technique has confirmed the confinement of the porphyrin and its various aggregates into the inner water pool. Various species have been detected as function of the size of the microemulsions, concentration of the porphyrin, pH, and aging of the solutions by using a combination of UV-vis absorption, steady fluorescence emission, fluorescence lifetime measurements, and time-resolved fluorescence anisotropy. Under neutral pH conditions, the porphyrin is present as the free base monomer (S414) in the inner water compartment, and it is free to rotate when the size of the droplet is large enough and the porphyrin concentration is low. On increasing the concentration and/or decreasing the microemulsion size, a H-dimer of the free base (S406) is prevalently formed. Aging both the S414 and S406 species leads to the formation of a new species (S424), which has been postulated as a H-type dimer of the diacid porphyrin. On decreasing the pH, the species S414 and S406 almost instantaneously convert into the diacid porphyrin, which is monomeric (S434). This latter is an intermediate in the eventual formation of J-aggregated TPPS4 (S490). A marked stability has been observed for the S424 species, which do not interconvert on changing the pH of the bulk aqueous phase.