A general method for suzuki-miyaura coupling reactions using lithium triisopropyl borates

Conditions for the Suzuki-Miyaura coupling of lithium triisopropyl borates are reported, as well as a procedure for a one-pot lithiation, borylation, and subsequent Suzuki-Miyaura coupling of various heterocycles with aryl halides. These borate species are much more stable toward protodeboronation than the corresponding boronic acids and can conveniently be stored on benchtop at room temperature.     

Product selectivity control induced by using liquid-liquid parallel laminar flow in a microreactor

Product selectivity control based on a liquid-liquid parallel laminar flow has been successfully demonstrated by using a microreactor. Our electrochemical microreactor system enables regioselective cross-coupling reaction of aldehyde with allylic chloride via chemoselective cathodic reduction of substrate by the combined use of suitable flow mode and corresponding cathode material. The formation of liquid-liquid parallel laminar flow in the microreactor was supported by the estimation of benzaldehyde diffusion coefficient and computational fluid dynamics simulation. The diffusion coefficient for benzaldehyde in Bu(4)NClO(4)-HMPA medium was determined to be 1.32 × 10(-7) cm(2) s(-1) by electrochemical measurements, and the flow simulation using this value revealed the formation of clear concentration gradient of benzaldehyde in the microreactor channel over a specific channel length. In addition, the necessity of the liquid-liquid parallel laminar flow was confirmed by flow mode experiments.     

On-chip enzymatic microreactor using trypsin-immobilized superparamagnetic nanoparticles for highly efficient proteolysis

An easily replaceable microchip enzymatic microreactor has been fabricated based on the glass microchip with trypsin-immobilized superparamagnetic nanoparticles. Magnetic nanoparticles with small size (50 nm in diameter) and strong magnetism were synthesized. At first, amine-functionalized magnetic nanoparticles with high magnetic responsivity and excellent dispersibility were prepared through a facile one-pot strategy. Then, magnetic nanoparticles were functionalized with numerous aldehyde (-CHO) groups by treating the as-synthesized, amine-functionalized magnetic nanoparticles with glutaraldehyde. Finally, immobilization of trypsin onto the aldehyde-functionalized magnetic nanoparticles was achieved through reaction of the aldehyde groups with amine groups of trypsin. The prepared magnetic nanoparticles were then locally packed onto the glass microchip by the application of a strong magnetic field using a magnet to form an on-chip magnetic nanoparticles packing bed. Capability of the proteolytic microreactor was demonstrated by cytochrome c, bovine serum albumin and myoglobin as model proteins. The digestion products were characterized using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry with sequence coverage of 83%, 43% and 79% observed, respectively. Complete protein digestion was achieved in a short time (10 s) under the flow rate of 5 microL/min. These results are expected to open up a new possibility for the proteolysis analysis as well as a new application of magnetic nanoparticles. It is easy to replace the nanoparticles and make the new microreactor. It takes less than 1 min under the condition of extra magnetic to form a new packing bed. The packing bed can be used for at least five times without any treatments. Additionally, since the preparation and surface functionality of magnetic nanoparticles is low-cost and reproducible, the preparation method and application approach of the magnetic nanoparticles may find much potential in proteome research. This microreactor was also successfully applied to the analysis of an RPLC fraction of the rat liver extract. After a database search, six proteins were identified. This opens a route for its further application in bottom-up proteomic analysis.     

Single-step radiofluorination of peptides using continuous flow microreactor

18F radiolabelling of peptides bearing two different prosthetic groups was successfully conducted in a continuous flow microfluidic device for the first time. Radiochemical yields were dependent on precursor concentration, reaction temperature and flow rate. The choice of leaving group had a dramatic influence on the reaction outcome. Rapid reaction optimization was possible.     

Flash flow pyrolysis: mimicking flash vacuum pyrolysis in a high-temperature/high-pressure liquid-phase microreactor environment

Flash vacuum pyrolysis (FVP) is a gas-phase continuous-flow technique where a substrate is sublimed through a hot quartz tube under high vacuum at temperatures of 400-1100 °C. Thermal activation occurs mainly by molecule-wall collisions with contact times in the region of milliseconds. As a preparative method, FVP is used mainly to induce intramolecular high-temperature transformations leading to products that cannot easily be obtained by other methods. It is demonstrated herein that liquid-phase high-temperature/high-pressure (high-T/p) microreactor conditions (160-350 °C, 90-180 bar) employing near- or supercritical fluids as reaction media can mimic the results obtained using preparative gas-phase FVP protocols. The high-T/p liquid-phase "flash flow pyrolysis" (FFP) technique was applied to the thermolysis of Meldrum's acid derivatives, pyrrole-2,3-diones, and pyrrole-2-carboxylic esters, producing the expected target heterocycles in high yields with residence times between 10 s and 10 min. The exact control over flow rate (and thus residence time) using the liquid-phase FFP method allows a tuning of reaction selectivities not easily achievable using FVP. Since the solution-phase FFP method does not require the substrate to be volatile any more--a major limitation in classical FVP--the transformations become readily scalable, allowing higher productivities and space-time yields compared with gas-phase protocols. Differential scanning calorimetry measurements and extensive DFT calculations provided essential information on pyrolysis energy barriers and the involved reaction mechanisms. A correlation between computed activation energies and experimental gas-phase FVP (molecule-wall collisions) and liquid-phase FFP (molecule-molecule collisions) pyrolysis temperatures was derived.     

New asymmetric vanadium catalyst for highly selective oxidative coupling polymerization

Novel oxovanadium(IV)–bisoxazoline catalysts, such as vanadyl sulfate (VOSO₄)–(R)‐2,2′‐isopropylidenebis(4‐phenyl‐2‐oxazoline) [(R)Phbox], for the asymmetric oxidative coupling polymerization (AOCP) of 2,3‐dihydroxynaphthalene were developed. For example, the AOCP with VOSO₄–(R)Phbox in CH₂Cl₂–MeOH [7/1 (v/v)] at room temperature for 24 h under an O₂ atmosphere, followed by acetylation of the hydroxyl groups, afforded a polymer in a 58% yield with a specific rotation of [α]_D = ?147. The enantioselectivity during the polymerization was estimated to be 80% enantiomeric excess (S), a value much higher than that observed for the polymerizations with the copper(I)‐based catalyst systems and the typical oxovanadium(IV) catalysts reported for the asymmetric oxidative coupling producing the 1,1′‐bi‐2‐naphthol derivatives. © 2005 Wiley Periodicals, Inc., Inc. J Polym Sci Part A: Polym Chem 43: 5872–5878, 2005     

Recent topics of functionalized organolithiums using flow microreactor chemistry

Examples in this mini-review illustrate the potential of flow microreactor chemistry in chemical science and chemical production. Flow microreactors provide a powerful method for novel transformations via functional organolithiums that cannot be achieved using a conventional macro batch reactor.     

Cyclopalladated ferrocenylimine: a highly effective catalyst for the borylation/suzuki coupling reaction

The cyclopalladated ferrocenylimine was an efficient catalyst for the borylation/Suzuki coupling reaction. The catalytic loading for the reaction containing bromoarenes was 1 mol %. When iodobenzene was used, the catalytic loading was as low as 0.1 mol %. Furthermore, the cyclopalladated ferrocenylimine also exhibited excellent catalytic power in the case of substrates containing electron-donating substituents, with yields reaching 93% or higher.     

A bifurcated pathway to thiazoles and imidazoles using a modular flow microreactor

A scalable method for the preparation of 4,5-disubstituted thiazoles and imidazoles as distinct regioisomeric products using a modular flow microreactor has been devised. The process makes use of microfluidic reaction chips and packed immobilized-reagent columns to effect bifurcation of the reaction pathway.     

Palladium-benzimidazolium salt catalyst systems for Suzuki coupling: development of a practical and highly active palladium catalyst system for coupling of aromatic halides with arylboronic acids

Palladium-benzimidazolium salt catalyst systems have been studied for the Suzuki coupling. A different substitutent effect has been uncovered with respect to nitrogen substituents in the benzimidazolium salts from the palladium-imidazolium salt analogs. A practical and highly active palladium catalyst system, PdCl₂/N,N′-dibenzylbenzimidazolium chloride 2, has been identified for the Suzuki coupling of aromatic halides with arylboronic acids. The coupling of a wide array of aromatic halides with arylboronic acids with the PdCl₂-2 catalyst system gave good to excellent yields. The effective palladium loading could be as low as 0.0001 mol% and 0.01-0.1 mol% for iodide and bromide substrates, respectively. The coupling of unactivated aromatic chlorides with arylboronic acids also gave good results using Cs₂CO₃ as base with a 2 mol% palladium loading. The electronic factors from aromatic halides exert a significant influence on the Suzuki coupling catalyzed by the PdCl₂-2 system while the electronic effect from the arylboronic counterparts is negligible. The aromatic halides with modest steric hindrance could also couple smoothly with phenylboronic acids using the PdCl₂-2 catalyst system.     

A highly efficient catalyst for Suzuki coupling of aryl halides and bromoarylphosphine oxides

The biphenyl-based phosphine, P(o-C₆H₄C₆H₄Me)Ph₂, is a moderately bulky and electron-rich phosphine, which has been successfully applied to the palladium catalyzed Suzuki coupling of activated and deactivated aryl halides as well as bromoarylphosphines and bromoarylphosphine oxides, with low catalyst loading and good to excellent conversions and turnovers.     

Generation and reactions of oxiranyllithiums by use of a flow microreactor system

A flow microreactor system consisting of micromixers and microtubes provides an effective reactor for the generation and reactions of aryloxiranyllithiums without decomposition by virtue of short residence time and efficient temperature control. The deprotonation of styrene oxides with sBuLi can be conducted by using the flow microreactor system at -78 or -68 °C (whereas much lower temperatures (< -100 °C) are needed for the same reactions conducted under macrobatch conditions). The resulting α-aryloxiranyllithiums were allowed to react with electrophiles in the flow microreactor system at the same temperature. The sequential introduction of various electrophiles onto 2,3-diphenyloxiranes was also achieved by using an integrated flow microreactor, which serves as a powerful system for the stereoselective synthesis of tetrasubstituted epoxides.     

Identification of highly reactive sequences for PLP-mediated bioconjugation using a combinatorial peptide library

Chemical reactions that facilitate the attachment of synthetic groups to proteins are useful tools for the field of chemical biology and enable the incorporation of proteins into new materials. We have previously reported a pyridoxal 5'-phosphate (PLP)-mediated reaction that site-specifically oxidizes the N-terminal amine of a protein to afford a ketone. This unique functional group can then be used to attach a reagent of choice through oxime formation. Since its initial report, we have found that the N-terminal sequence of the protein can significantly influence the overall success of this strategy. To obtain short sequences that lead to optimal conversion levels, an efficient method for the evaluation of all possible N-terminal amino acid combinations was needed. This was achieved by developing a generalizable combinatorial peptide library screening platform suitable for the identification of sequences that display high levels of reactivity toward a desired bioconjugation reaction. In the context of N-terminal transamination, a highly reactive alanine-lysine motif emerged, which was confirmed to promote the modification of peptide substrates with PLP. This sequence was also tested on two protein substrates, leading to substantial increases in reactivity relative to their wild-type termini. This readily encodable tripeptide thus appears to provide a significant improvement in the reliability with which the PLP-mediated bioconjugation reaction can be used. This study also provides an important first example of how synthetic peptide libraries can accelerate the discovery and optimization of protein bioconjugation strategies.     

Total synthesis of aristolactams via a one-pot suzuki-miyaura coupling/aldol condensation cascade reaction

A direct one-pot synthesis of phenanthrene lactams, which employs a Suzuki-Miyaura coupling/aldol condensation cascade reaction of isoindolin-1-one with 2-formylphenylboronic acid, has been developed. The approach is used to efficiently produce a number of natural aristolactams, such as aristolactam BII (cepharanone B), aristolactam BIII, aristolactam FI (piperolactam A), N-methyl piperolactam A, and sauristolactam.     

Suzuki-Miyaura coupling catalyzed by polymer-incarcerated palladium, a highly active, recoverable, and reusable Pd catalyst

[reaction: see text] Suzuki-Miyaura coupling using a highly efficient and reusable polymer-incarcerated palladium (PI Pd) is described. Various coupling reactions proceeded smoothly using PI Pd with phosphine ligands, and the catalyst could be recovered by simple filtration and reused several times without loss of activity.     

Gas-phase generation of highly reactive hexatriyne-bridged [6n]paracyclophynes

[6n]Paracyclophenediynes 2a-d (n = 3-6) having [4.3.2]propellatriene units were prepared as precursors of the corresponding [6n]paracyclophynes. Laser irradiation of 2a-d produced the negative ions of [6n]paracyclophynes 1a-d (n = 3-6) by extrusion of the indan fragments, which were detected by time-of-flight mass spectrometry.     

Heck-type olefination and Suzuki coupling reactions using highly efficient oxacalix[4]arene wrapped nanopalladium catalyst

A simple one-pot method is used for the synthesis of water dispersible and stable palladium nanoparticles (PdNps) where oxacalix[4]arene dihydrazide (OXDH) is used as both a reducing and capping agent. The OXDH-PdNps have been characterized by UV–Visible spectroscopy, Fourier transform infrared (FT-IR), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), powder X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The OXDH-PdNps are spherical in shape with an average size of 3–4?nm and well crystallized in a face centered cubic structure. The capping of the OXDH ligand on the nanoparticles surface was evaluated using FT-IR. The OXDH-PdNps have been used in carbon–carbon coupling reactions, namely, the Suzuki–Miyaura and Mizoroki–Heck reactions. Both of the reactions are carried out under phosphine-free conditions to provide better yields. The nanocatalyst can be easily recovered and reused for six consecutive catalytic cycles without any significant loss in its catalytic activity.     

Heterogeneous Suzuki and Stille coupling reactions using highly efficient palladium(0) immobilized MCM-41 catalyst

An efficient palladium(0) immobilized MCM-41 catalytic system for C-C cross-coupling reaction has been developed. Ligand-free Pd(0)-MCM-41 catalyst can be successfully used in coupling reaction between various aryl halides including deactivated chlorobenzene with aryl borane and organotin to give biaryls in excellent yields with high turnover frequency (TOF) (the maximal TOFs are up to 6990 for the reaction of bromobenzene with phenylboronic acid). The catalyst can be recycled and reused without any loss of catalytic activity.